# See README.md for a full documentation of the configuration file, its types
# and values.

# Rate limiting configuration.  It controls how we should mitigate DNS
# amplification attacks.
ratelimit:
    # Flag to refuse ANY type request.
    refuseany: true
    # If response is larger than this, it is counted as several responses.
    response_size_estimate: 1KB
    # Rate limit options for IPv4 addresses.
    ipv4:
        # Rate of requests per second for one subnet for IPv4 addresses.
        rps: 30
        # The lengths of the subnet prefixes used to calculate rate limiter
        # bucket keys for IPv4 addresses.
        subnet_key_len: 24
    # Rate limit options for IPv6 addresses.
    ipv6:
        # Rate of requests per second for one subnet for IPv6 addresses.
        rps: 300
        # The lengths of the subnet prefixes used to calculate rate limiter
        # bucket keys for IPv6 addresses.
        subnet_key_len: 48
    # The time during which to count the number of times a client has hit the
    # rate limit for a back off.
    backoff_period: 10m
    # How many times a client hits the rate limit before being held in the back
    # off.
    backoff_count: 1000
    # How much a client that has hit the rate limit too often stays in the back
    # off.
    backoff_duration: 30m

    # Configuration for the allowlist.
    allowlist:
        # Lists of CIDRs or IPs ratelimit should be disabled for.
        list:
          - '127.0.0.1'
          - '127.0.0.1/24'
        # Time between two updates of allow list.
        refresh_interval: 1h

    # Configuration for the stream connection limiting.
    connection_limit:
        enabled: true
        # The point at which the limiter stops accepting new connections.  Once
        # the number of active connections reaches this limit, new connections
        # wait for the number to decrease below resume.
        stop: 1000
        resume: 800

    # Configuration of QUIC streams limiting.
    quic:
        enabled: true
        # The maximum number of concurrent streams that a peer is allowed to
        # open.
        max_streams_per_peer: 100

    # Configuration of TCP pipeline limiting.
    tcp:
        enabled: true
        # The maximum number of processing TCP messages per one connection.
        max_pipeline_count: 100

# Access settings.
access:
    # Domains to block.
    blocked_question_domains:
        - 'test.org'
    # Client subnets to block.
    blocked_client_subnets:
        - '1.2.3.0/8'

# DNS cache configuration.
cache:
    # The type of cache to use.  Can be 'simple' (a simple LRU cache) or 'ecs'
    # (a ECS-aware LRU cache).  If set to 'ecs', ecs_size must be greater than
    # zero.
    type: 'simple'
    # The total number of items in the cache for hostnames with no ECS support.
    size: 10000
    # The total number of items in the cache for hostnames with ECS support.
    ecs_size: 10000
    ttl_override:
        enabled: true
        # The minimum duration of TTL for a cache item.
        min: 60s

# DNS upstream configuration.
upstream:
    servers:
      - address: 'tcp://1.1.1.1:53'
        timeout: 2s
      - address: '8.8.4.4:53'
        timeout: 2s
    fallback:
        servers:
          - address: '1.1.1.1:53'
            timeout: 1s
          - address: '8.8.8.8:53'
            timeout: 1s
    healthcheck:
        enabled: true
        interval: 2s
        timeout: 1s
        backoff_duration: 30s
        domain_template: '${RANDOM}.neverssl.com'

# Common DNS settings.
#
# TODO(a.garipov): Consider making these settings per-server-group.
dns:
    # The timeout for any read from a UDP connection or the first read from
    # a TCP/TLS connection.  It currently doesn't affect DNSCrypt, QUIC, or
    # HTTPS.
    read_timeout: 2s
    # The timeout for consecutive reads from a TCP/TLS connection.  It currently
    # doesn't affect DNSCrypt, QUIC, or HTTPS.
    tcp_idle_timeout: 30s
    # The timeout for writing to a UDP or TCP/TLS connection.  It currently
    # doesn't affect DNSCrypt, QUIC, or HTTPS.
    write_timeout: 2s
    # The timeout for the entire handling of a single query.
    handle_timeout: 1s
    # UDP response size limit.
    max_udp_response_size: 1024B

# DNSDB configuration.
dnsdb:
    enabled: true
    max_size: 500000

# Common DNS HTTP backend service configuration.
backend:
    # Timeout for all outgoing backend HTTP requests.  Set to `0s` to disable
    # timeouts.
    timeout: 10s
    # How often AdGuard DNS checks the backend for data updates.
    #
    # TODO(a.garipov): Replace with a better update mechanism in the future.
    refresh_interval: 15s
    # How often AdGuard DNS performs full synchronization.
    full_refresh_interval: 24h
    # How long to wait before attempting a new full synchronization after a
    # failure.
    full_refresh_retry_interval: 1h
    # How often AdGuard DNS sends the billing statistics to the backend.
    bill_stat_interval: 15s

# Query logging configuration.
query_log:
    file:
        # If true, enable writing JSONL logs to a file.
        enabled: true

# Common GeoIP database configuration.
geoip:
    # The size of the host lookup cache.
    host_cache_size: 100000
    # The size of the IP lookup cache.
    ip_cache_size: 100000
    # Interval between the GeoIP database refreshes.
    refresh_interval: 1h

# DNS checking configuration.
check:
    # Domains to use for DNS checking.
    kv:
        # Defines the type of remote kay-value storage.  Allowed values are
        # "consul" and "redis".
        type: 'consul'
        # For how long to keep the information about the client.
        ttl: 30s
    # Domains to use for DNS checking.
    domains:
      - dnscheck.adguard-dns.com
      - dnscheck.adguard.com
    # Location of this node.
    node_location: 'ams'
    # Name of this node.
    node_name: 'eu-1.dns.example.com'
    # IPs to respond with.
    ipv4:
      - 1.2.3.4
      - 5.6.7.8
    ipv6:
      - 1234::cdee
      - 1234::cdef

# Web/HTTP(S) service configuration.  All non-root requests to the main service
# not matching the static_content map are shown a 404 page.  In special
# case of `/robots.txt` request the special response is served.
web:
    # Optional linked IP web server configuration.  static_content is not served
    # on these addresses.
    linked_ip:
        bind:
          - address: '127.0.0.1:9080'
          - address: '127.0.0.1:9443'
            certificates:
              - certificate: './test/cert.crt'
                key: './test/cert.key'
    # Optional adult blocking web server configuration.  static_content is not
    # served on these addresses.  The addresses should be the same as in the
    # general_blocking and safe_browsing objects.
    adult_blocking:
        bind:
          - address: '127.0.0.1:9081'
          - address: '127.0.0.1:9444'
            certificates:
              - certificate: './test/cert.crt'
                key: './test/cert.key'
        block_page: './test/block_page_adult.html'
    # Optional general blocking web server configuration.  static_content is not
    # served on these addresses.  The addresses should be the same as in the
    # adult_blocking and safe_browsing objects.
    general_blocking:
        bind:
          - address: '127.0.0.1:9082'
          - address: '127.0.0.1:9445'
            certificates:
              - certificate: './test/cert.crt'
                key: './test/cert.key'
        block_page: './test/block_page_general.html'
    # Optional safe browsing web server configuration.  static_content is not
    # served on these addresses.  The addresses should be the same as in the
    # general_blocking and safe_browsing objects.
    safe_browsing:
        bind:
          - address: '127.0.0.1:9083'
          - address: '127.0.0.1:9446'
            certificates:
              - certificate: './test/cert.crt'
                key: './test/cert.key'
        block_page: './test/block_page_sb.html'
    # Listen addresses for the web service in addition to the ones in the
    # DNS-over-HTTPS handlers.
    non_doh_bind:
      - address: '127.0.0.1:9084'
      - address: '127.0.0.1:9447'
        certificates:
          - certificate: './test/cert.crt'
            key: './test/cert.key'
    # Static content map.  Not served on the linked_ip, safe_browsing and adult_blocking
    # servers.  Paths must not cross the ones used by the DNS-over-HTTPS server.
    static_content:
        '/favicon.ico':
            content: ''
            headers:
              Access-Control-Allow-Origin:
                - '*'
              Content-Type:
                - 'image/x-icon'
    # If not defined, AdGuard DNS will respond with a 404 page to all such
    # requests.
    root_redirect_url: 'https://adguard-dns.com'
    # Path to the 404 page HTML file.  If not set, a simple plain text 404
    # response will be served.
    error_404: './test/error_404.html'
    # Same as error_404, but for the 500 status.
    error_500: './test/error_500.html'
    # Timeout for server operations
    timeout: 1m

# AdGuard general safe browsing filter configuration.
safe_browsing:
    block_host: 'standard-block.dns.adguard.com'
    cache_size: 1024
    cache_ttl: 1h
    refresh_interval: 1h
    refresh_timeout: 1m

# AdGuard adult content blocking filter configuration.
adult_blocking:
    block_host: 'family-block.dns.adguard.com'
    cache_size: 1024
    cache_ttl: 1h
    refresh_interval: 1h
    refresh_timeout: 1m

# Settings for rule-list-based filters.
#
# TODO(a.garipov):  Add the timeout for the blocked-service index refresh.  It
# is currently hardcoded to 3 minutes.
filters:
    # The TTL to set for responses to requests for filtered domains.
    response_ttl: 5m
    # The size of the LRU cache of compiled filtering engines for profiles with
    # custom filtering rules.
    custom_filter_cache_size: 1024
    # The size of the LRU cache of safe-search filtering results.
    safe_search_cache_size: 1024
    # How often to update filters from the index.  See the documentation for the
    # FILTER_INDEX_URL environment variable.
    refresh_interval: 1h
    # The timeout for the entire filter update operation.  Note that filter
    # rule-list index and each filter rule-list update operations have their own
    # timeouts, see index_refresh_timeout and rule_list_refresh_timeout.
    refresh_timeout: 5m
    # The timeout for the filter rule-list index update operation.  See also
    # refresh_timeout for the entire filter update operation.
    index_refresh_timeout: 1m
    # The timeout for the filter update operation of each rule-list, including
    # the safe-search ones.  See also refresh_timeout for the entire filter
    # update operation.
    rule_list_refresh_timeout: 1m
    # MaxSize is the maximum size of the downloadable filtering rule-list.
    max_size: 256MB
    # Rule list cache.
    rule_list_cache:
        # If true, use filtering rule list result cache.
        enabled: true
        # The size of the LRU cache of rule-list filtering results.
        size: 10000

# Filtering groups are a set of different filtering configurations.  These
# filtering configurations are then used by server_groups.
filtering_groups:
  - id: 'default'
    parental:
        enabled: false
    rule_lists:
        enabled: true
        # IDs must be the same as those of the filtering rule lists received
        # from the filter index.
        ids:
          - 'adguard_dns_filter'
    safe_browsing:
        enabled: true
        block_dangerous_domains: true
        block_newly_registered_domains: false
    block_private_relay: false
    block_firefox_canary: true
  - id: 'family'
    parental:
        enabled: true
        block_adult: true
        general_safe_search: true
        youtube_safe_search: true
    rule_lists:
        enabled: true
        ids:
          - 'adguard_dns_filter'
    safe_browsing:
        enabled: true
        block_dangerous_domains: true
        block_newly_registered_domains: false
    block_private_relay: false
    block_firefox_canary: true
  - id: 'non_filtering'
    rule_lists:
        enabled: false
    parental:
        enabled: false
    safe_browsing:
        enabled: false
        block_dangerous_domains: true
        block_newly_registered_domains: false
    block_private_relay: false
    block_firefox_canary: true

# The configuration for the device-listening feature.  Works only on Linux with
# SO_BINDTODEVICE support.
interface_listeners:
    # The size of the buffers of the channels used to dispatch TCP connections
    # and UDP sessions.
    channel_buffer_size: 1000
    # List is the mapping of interface-listener IDs to their configuration.
    list:
        'eth0_plain_dns':
            interface: 'eth0'
            port: 53
        'eth0_plain_dns_secondary':
            interface: 'eth0'
            port: 5353

# Server groups and servers.
server_groups:
  - name: 'adguard_dns_default'
    # This filtering_group is used for all anonymous clients.
    filtering_group: 'default'
    ddr:
        enabled: true
        # Device ID domain name suffix to DDR record template mapping.  Keep in
        # sync with servers and device_id_wildcards.
        device_records:
            '*.d.dns.example.com':
                doh_path: '/dns-query{?dns}'
                https_port: 443
                quic_port: 853
                tls_port: 853
                ipv4_hints:
                  - '127.0.0.1'
                ipv6_hints:
                  - '::1'
        # Public domain name to DDR record template mapping.  Keep in sync with
        # servers.
        public_records:
            'dns.example.com':
                doh_path: '/dns-query{?dns}'
                https_port: 443
                quic_port: 853
                tls_port: 853
                ipv4_hints:
                  - '127.0.0.1'
                ipv6_hints:
                  - '::1'
    tls:
        certificates:
          - certificate: './test/cert.crt'
            key: './test/cert.key'
        session_keys:
          - './test/tls_key_1'
          - './test/tls_key_2'
        device_id_wildcards:
          - '*.dns.example.com'
    servers:
      - name: 'default_dns'
        # See README for the list of protocol values.
        protocol: 'dns'
        linked_ip_enabled: true
        # Either bind_interfaces or bind_addresses (see below) can be used for
        # the plain-DNS servers.
        bind_interfaces:
          - id: 'eth0_plain_dns'
            subnets:
              - '127.0.0.0/8'
          - id: 'eth0_plain_dns_secondary'
            subnets:
              - '127.0.0.0/8'
      - name: 'default_dot'
        protocol: 'tls'
        linked_ip_enabled: false
        bind_addresses:
          - '127.0.0.1:853'
      - name: 'default_doh'
        protocol: 'https'
        linked_ip_enabled: false
        bind_addresses:
          - '127.0.0.1:443'
      - name: 'default_doq'
        protocol: 'quic'
        linked_ip_enabled: false
        bind_addresses:
          - '127.0.0.1:784'
          - '127.0.0.1:853'
      - name: 'default_dnscrypt'
        protocol: 'dnscrypt'
        linked_ip_enabled: false
        bind_addresses:
          - '127.0.0.1:5443'
        dnscrypt:
            # See https://github.com/ameshkov/dnscrypt/blob/master/README.md#configure.
            config_path: ./test/dnscrypt.yml
      - name: 'default_dnscrypt_inline'
        protocol: 'dnscrypt'
        linked_ip_enabled: false
        bind_addresses:
          - '127.0.0.1:5444'
        dnscrypt:
            inline:
                provider_name: '2.dnscrypt-cert.example.org'
                public_key: 'F11DDBCC4817E543845FDDD4CB881849B64226F3DE397625669D87B919BC4FB0'
                private_key: '5752095FFA56D963569951AFE70FE1690F378D13D8AD6F8054DFAA100907F8B6F11DDBCC4817E543845FDDD4CB881849B64226F3DE397625669D87B919BC4FB0'
                resolver_secret: '9E46E79FEB3AB3D45F4EB3EA957DEAF5D9639A0179F1850AFABA7E58F87C74C4'
                resolver_public: '9327C5E64783E19C339BD6B680A56DB85521CC6E4E0CA5DF5274E2D3CE026C6B'
                es_version: 1
                certificate_ttl: 8760h
    profiles_enabled: true

# Connectivity check configuration.
connectivity_check:
    probe_ipv4: '8.8.8.8:53'
    probe_ipv6: '[2001:4860:4860::8888]:53'

# Additional information to be exposed through metrics.
additional_metrics_info:
    test_key: 'test_value'

# Network settings.
network:
    # Defines the size of socket send buffer in a human-readable format.
    # Default is zero (uses system settings).
    so_sndbuf: 0
    # Defines the size of socket receive buffer in a human-readable format.
    #  Default is zero (uses system settings).
    so_rcvbuf: 0