diff --git a/drivers/staging/brcm80211/brcmfmac/dhd.h b/drivers/staging/brcm80211/brcmfmac/dhd.h
index a726b493ea8d..61560628c819 100644
--- a/drivers/staging/brcm80211/brcmfmac/dhd.h
+++ b/drivers/staging/brcm80211/brcmfmac/dhd.h
@@ -34,15 +34,167 @@
 #include <linux/suspend.h>
 #include <asm/uaccess.h>
 #include <asm/unaligned.h>
+#include "bcmdefs.h"
 /* The kernel threading is sdio-specific */
-
-#include <wlioctl.h>
+#include "bcmwifi.h"
+#include "proto/802.11.h"
+#include "proto/bcmeth.h"
+#include "proto/bcmevent.h"
 
 /* Forward decls */
 struct dhd_bus;
 struct dhd_prot;
 struct dhd_info;
 
+#define WLC_UP					2
+#define WLC_SET_PROMISC				10
+#define WLC_GET_RATE				12
+#define WLC_GET_INFRA				19
+#define WLC_SET_INFRA				20
+#define WLC_GET_AUTH				21
+#define WLC_SET_AUTH				22
+#define WLC_GET_BSSID				23
+#define WLC_GET_SSID				25
+#define WLC_SET_SSID				26
+#define WLC_GET_CHANNEL				29
+#define WLC_GET_SRL				31
+#define WLC_GET_LRL				33
+#define WLC_GET_RADIO				37
+#define WLC_SET_RADIO				38
+#define WLC_GET_PHYTYPE				39
+#define WLC_SET_KEY				45
+#define WLC_SET_PASSIVE_SCAN			49
+#define WLC_SCAN				50
+#define WLC_SCAN_RESULTS			51
+#define WLC_DISASSOC				52
+#define WLC_REASSOC				53
+#define WLC_SET_ROAM_TRIGGER			55
+#define WLC_SET_ROAM_DELTA			57
+#define WLC_GET_DTIMPRD				77
+#define WLC_SET_COUNTRY				84
+#define WLC_GET_PM				85
+#define WLC_SET_PM				86
+#define WLC_GET_AP				117
+#define WLC_SET_AP				118
+#define WLC_GET_RSSI				127
+#define WLC_GET_WSEC				133
+#define WLC_SET_WSEC				134
+#define WLC_GET_PHY_NOISE			135
+#define WLC_GET_BSS_INFO			136
+#define WLC_SET_SCAN_CHANNEL_TIME		185
+#define WLC_SET_SCAN_UNASSOC_TIME		187
+#define WLC_SCB_DEAUTHENTICATE_FOR_REASON	201
+#define WLC_GET_VALID_CHANNELS			217
+#define WLC_GET_KEY_PRIMARY			235
+#define WLC_SET_KEY_PRIMARY			236
+#define WLC_SET_SCAN_PASSIVE_TIME		258
+#define WLC_GET_VAR				262	/* get value of named variable */
+#define WLC_SET_VAR				263	/* set named variable to value */
+
+/* phy types (returned by WLC_GET_PHYTPE) */
+#define	WLC_PHY_TYPE_A		0
+#define	WLC_PHY_TYPE_B		1
+#define	WLC_PHY_TYPE_G		2
+#define	WLC_PHY_TYPE_N		4
+#define	WLC_PHY_TYPE_LP		5
+#define	WLC_PHY_TYPE_SSN	6
+#define	WLC_PHY_TYPE_HT		7
+#define	WLC_PHY_TYPE_LCN	8
+#define	WLC_PHY_TYPE_NULL	0xf
+
+#define WL_PKT_FILTER_FIXED_LEN		  offsetof(wl_pkt_filter_t, u)
+#define WL_PKT_FILTER_PATTERN_FIXED_LEN	  offsetof(wl_pkt_filter_pattern_t, mask_and_pattern)
+
+#define WL_EVENTING_MASK_LEN	16
+
+#define TOE_TX_CSUM_OL		0x00000001
+#define TOE_RX_CSUM_OL		0x00000002
+
+/* maximum channels returned by the get valid channels iovar */
+#define WL_NUMCHANNELS		64
+
+#define	WL_BSS_INFO_VERSION	108	/* current ver of wl_bss_info struct */
+
+/* size of wl_scan_params not including variable length array */
+#define WL_SCAN_PARAMS_FIXED_SIZE 64
+
+/* masks for channel and ssid count */
+#define WL_SCAN_PARAMS_COUNT_MASK 0x0000ffff
+#define WL_SCAN_PARAMS_NSSID_SHIFT 16
+
+#define WL_SCAN_ACTION_START      1
+#define WL_SCAN_ACTION_CONTINUE   2
+#define WL_SCAN_ACTION_ABORT      3
+
+#define ISCAN_REQ_VERSION 1
+
+/* wl_iscan_results status values */
+#define WL_SCAN_RESULTS_SUCCESS	0
+#define WL_SCAN_RESULTS_PARTIAL	1
+#define WL_SCAN_RESULTS_PENDING	2
+#define WL_SCAN_RESULTS_ABORTED	3
+#define WL_SCAN_RESULTS_NO_MEM	4
+
+#define MAX_CCA_CHANNELS 38	/* Max number of 20 Mhz wide channels */
+#define MAX_CCA_SECS     60	/* CCA keeps this many seconds history */
+
+#define IBSS_MED        15	/* Mediom in-bss congestion percentage */
+#define IBSS_HI         25	/* Hi in-bss congestion percentage */
+#define OBSS_MED        12
+#define OBSS_HI         25
+#define INTERFER_MED    5
+#define INTERFER_HI     10
+
+#define  CCA_FLAG_2G_ONLY		0x01	/* Return a channel from 2.4 Ghz band */
+#define  CCA_FLAG_5G_ONLY		0x02	/* Return a channel from 2.4 Ghz band */
+#define  CCA_FLAG_IGNORE_DURATION	0x04	/* Ignore dwell time for each channel */
+#define  CCA_FLAGS_PREFER_1_6_11	0x10
+#define  CCA_FLAG_IGNORE_INTERFER 	0x20	/* do not exlude channel based on interfer level */
+
+#define CCA_ERRNO_BAND 		1	/* After filtering for band pref, no choices left */
+#define CCA_ERRNO_DURATION	2	/* After filtering for duration, no choices left */
+#define CCA_ERRNO_PREF_CHAN	3	/* After filtering for chan pref, no choices left */
+#define CCA_ERRNO_INTERFER	4	/* After filtering for interference, no choices left */
+#define CCA_ERRNO_TOO_FEW	5	/* Only 1 channel was input */
+
+#define WL_NUM_RPI_BINS		8
+#define WL_RM_TYPE_BASIC	1
+#define WL_RM_TYPE_CCA		2
+#define WL_RM_TYPE_RPI		3
+
+#define WL_RM_FLAG_PARALLEL	(1<<0)
+
+#define WL_RM_FLAG_LATE		(1<<1)
+#define WL_RM_FLAG_INCAPABLE	(1<<2)
+#define WL_RM_FLAG_REFUSED	(1<<3)
+
+#define WL_SOFT_KEY	(1 << 0)	/* Indicates this key is using soft encrypt */
+#define WL_PRIMARY_KEY	(1 << 1)	/* Indicates this key is the primary (ie tx) key */
+#define WL_KF_RES_4	(1 << 4)	/* Reserved for backward compat */
+#define WL_KF_RES_5	(1 << 5)	/* Reserved for backward compat */
+#define WL_IBSS_PEER_GROUP_KEY	(1 << 6)	/* Indicates a group key for a IBSS PEER */
+
+#define	WLC_IOCTL_SMLEN			256	/* "small" length ioctl buffer required */
+#define WLC_IOCTL_MEDLEN		1536	/* "med" length ioctl buffer required */
+#define	WLC_IOCTL_MAXLEN	8192
+
+#define DHD_IF_VIF	0x01	/* Virtual IF (Hidden from user) */
+
+/* optionally set by a module_param_string() */
+#define MOD_PARAM_PATHLEN	2048
+
+/* For supporting multiple interfaces */
+#define DHD_MAX_IFS	16
+#define DHD_DEL_IF	-0xe
+#define DHD_BAD_IF	-0xf
+
+enum cust_gpio_modes {
+	WLAN_RESET_ON,
+	WLAN_RESET_OFF,
+	WLAN_POWER_ON,
+	WLAN_POWER_OFF
+};
+
 /* The level of bus communication with the dongle */
 enum dhd_bus_state {
 	DHD_BUS_DOWN,		/* Not ready for frame transfers */
@@ -50,6 +202,316 @@ enum dhd_bus_state {
 	DHD_BUS_DATA		/* Ready for frame transfers */
 };
 
+/* Pattern matching filter. Specifies an offset within received packets to
+ * start matching, the pattern to match, the size of the pattern, and a bitmask
+ * that indicates which bits within the pattern should be matched.
+ */
+typedef struct wl_pkt_filter_pattern {
+	u32 offset;		/* Offset within received packet to start pattern matching.
+				 * Offset '0' is the first byte of the ethernet header.
+				 */
+	u32 size_bytes;	/* Size of the pattern.  Bitmask must be the same size. */
+	u8 mask_and_pattern[1];	/* Variable length mask and pattern data.  mask starts
+					 * at offset 0.  Pattern immediately follows mask.
+					 */
+} wl_pkt_filter_pattern_t;
+
+/* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */
+typedef struct wl_pkt_filter {
+	u32 id;		/* Unique filter id, specified by app. */
+	u32 type;		/* Filter type (WL_PKT_FILTER_TYPE_xxx). */
+	u32 negate_match;	/* Negate the result of filter matches */
+	union {			/* Filter definitions */
+		wl_pkt_filter_pattern_t pattern;	/* Pattern matching filter */
+	} u;
+} wl_pkt_filter_t;
+
+/* IOVAR "pkt_filter_enable" parameter. */
+typedef struct wl_pkt_filter_enable {
+	u32 id;		/* Unique filter id */
+	u32 enable;		/* Enable/disable bool */
+} wl_pkt_filter_enable_t;
+
+/* BSS info structure
+ * Applications MUST CHECK ie_offset field and length field to access IEs and
+ * next bss_info structure in a vector (in wl_scan_results_t)
+ */
+typedef struct wl_bss_info {
+	u32 version;		/* version field */
+	u32 length;		/* byte length of data in this record,
+				 * starting at version and including IEs
+				 */
+	u8 BSSID[ETH_ALEN];
+	u16 beacon_period;	/* units are Kusec */
+	u16 capability;	/* Capability information */
+	u8 SSID_len;
+	u8 SSID[32];
+	struct {
+		uint count;	/* # rates in this set */
+		u8 rates[16];	/* rates in 500kbps units w/hi bit set if basic */
+	} rateset;		/* supported rates */
+	chanspec_t chanspec;	/* chanspec for bss */
+	u16 atim_window;	/* units are Kusec */
+	u8 dtim_period;	/* DTIM period */
+	s16 RSSI;		/* receive signal strength (in dBm) */
+	s8 phy_noise;		/* noise (in dBm) */
+
+	u8 n_cap;		/* BSS is 802.11N Capable */
+	u32 nbss_cap;	/* 802.11N BSS Capabilities (based on HT_CAP_*) */
+	u8 ctl_ch;		/* 802.11N BSS control channel number */
+	u32 reserved32[1];	/* Reserved for expansion of BSS properties */
+	u8 flags;		/* flags */
+	u8 reserved[3];	/* Reserved for expansion of BSS properties */
+	u8 basic_mcs[MCSSET_LEN];	/* 802.11N BSS required MCS set */
+
+	u16 ie_offset;	/* offset at which IEs start, from beginning */
+	u32 ie_length;	/* byte length of Information Elements */
+	s16 SNR;		/* average SNR of during frame reception */
+	/* Add new fields here */
+	/* variable length Information Elements */
+} wl_bss_info_t;
+
+typedef struct wlc_ssid {
+	u32 SSID_len;
+	unsigned char SSID[32];
+} wlc_ssid_t;
+
+typedef struct wl_scan_params {
+	wlc_ssid_t ssid;	/* default: {0, ""} */
+	u8 bssid[ETH_ALEN];	/* default: bcast */
+	s8 bss_type;		/* default: any,
+				 * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT
+				 */
+	u8 scan_type;	/* flags, 0 use default */
+	s32 nprobes;		/* -1 use default, number of probes per channel */
+	s32 active_time;	/* -1 use default, dwell time per channel for
+				 * active scanning
+				 */
+	s32 passive_time;	/* -1 use default, dwell time per channel
+				 * for passive scanning
+				 */
+	s32 home_time;	/* -1 use default, dwell time for the home channel
+				 * between channel scans
+				 */
+	s32 channel_num;	/* count of channels and ssids that follow
+				 *
+				 * low half is count of channels in channel_list, 0
+				 * means default (use all available channels)
+				 *
+				 * high half is entries in wlc_ssid_t array that
+				 * follows channel_list, aligned for s32 (4 bytes)
+				 * meaning an odd channel count implies a 2-byte pad
+				 * between end of channel_list and first ssid
+				 *
+				 * if ssid count is zero, single ssid in the fixed
+				 * parameter portion is assumed, otherwise ssid in
+				 * the fixed portion is ignored
+				 */
+	u16 channel_list[1];	/* list of chanspecs */
+} wl_scan_params_t;
+
+/* incremental scan struct */
+typedef struct wl_iscan_params {
+	u32 version;
+	u16 action;
+	u16 scan_duration;
+	wl_scan_params_t params;
+} wl_iscan_params_t;
+
+/* 3 fields + size of wl_scan_params, not including variable length array */
+#define WL_ISCAN_PARAMS_FIXED_SIZE (offsetof(wl_iscan_params_t, params) + sizeof(wlc_ssid_t))
+
+typedef struct wl_scan_results {
+	u32 buflen;
+	u32 version;
+	u32 count;
+	wl_bss_info_t bss_info[1];
+} wl_scan_results_t;
+
+typedef struct wl_rateset_args {
+	u32 count;		/* # rates in this set */
+	u8 rates[WL_NUMRATES];	/* rates in 500kbps units w/hi bit set if basic */
+	u8 mcs[MCSSET_LEN];	/* supported mcs index bit map */
+} wl_rateset_args_t;
+
+/* u32 list */
+typedef struct wl_u32_list {
+	/* in - # of elements, out - # of entries */
+	u32 count;
+	/* variable length u32 list */
+	u32 element[1];
+} wl_u32_list_t;
+
+/* used for association with a specific BSSID and chanspec list */
+typedef struct wl_assoc_params {
+	u8 bssid[ETH_ALEN];	/* 00:00:00:00:00:00: broadcast scan */
+	s32 chanspec_num;	/* 0: all available channels,
+				 * otherwise count of chanspecs in chanspec_list
+				 */
+	chanspec_t chanspec_list[1];	/* list of chanspecs */
+} wl_assoc_params_t;
+#define WL_ASSOC_PARAMS_FIXED_SIZE 	(sizeof(wl_assoc_params_t) - sizeof(chanspec_t))
+
+/* used for reassociation/roam to a specific BSSID and channel */
+typedef wl_assoc_params_t wl_reassoc_params_t;
+#define WL_REASSOC_PARAMS_FIXED_SIZE	WL_ASSOC_PARAMS_FIXED_SIZE
+
+/* used for join with or without a specific bssid and channel list */
+typedef struct wl_join_params {
+	wlc_ssid_t ssid;
+	wl_assoc_params_t params;	/* optional field, but it must include the fixed portion
+					 * of the wl_assoc_params_t struct when it does present.
+					 */
+} wl_join_params_t;
+#define WL_JOIN_PARAMS_FIXED_SIZE 	(sizeof(wl_join_params_t) - sizeof(chanspec_t))
+
+/* size of wl_scan_results not including variable length array */
+#define WL_SCAN_RESULTS_FIXED_SIZE (sizeof(wl_scan_results_t) - sizeof(wl_bss_info_t))
+
+/* incremental scan results struct */
+typedef struct wl_iscan_results {
+	u32 status;
+	wl_scan_results_t results;
+} wl_iscan_results_t;
+
+/* size of wl_iscan_results not including variable length array */
+#define WL_ISCAN_RESULTS_FIXED_SIZE \
+	(WL_SCAN_RESULTS_FIXED_SIZE + offsetof(wl_iscan_results_t, results))
+
+typedef struct {
+	u32 duration;	/* millisecs spent sampling this channel */
+	u32 congest_ibss;	/* millisecs in our bss (presumably this traffic will */
+	/*  move if cur bss moves channels) */
+	u32 congest_obss;	/* traffic not in our bss */
+	u32 interference;	/* millisecs detecting a non 802.11 interferer. */
+	u32 timestamp;	/* second timestamp */
+} cca_congest_t;
+
+typedef struct {
+	chanspec_t chanspec;	/* Which channel? */
+	u8 num_secs;		/* How many secs worth of data */
+	cca_congest_t secs[1];	/* Data */
+} cca_congest_channel_req_t;
+
+typedef struct wl_country {
+	char country_abbrev[WLC_CNTRY_BUF_SZ];	/* nul-terminated country code used in
+						 * the Country IE
+						 */
+	s32 rev;		/* revision specifier for ccode
+				 * on set, -1 indicates unspecified.
+				 * on get, rev >= 0
+				 */
+	char ccode[WLC_CNTRY_BUF_SZ];	/* nul-terminated built-in country code.
+					 * variable length, but fixed size in
+					 * struct allows simple allocation for
+					 * expected country strings <= 3 chars.
+					 */
+} wl_country_t;
+
+typedef struct wl_channels_in_country {
+	u32 buflen;
+	u32 band;
+	char country_abbrev[WLC_CNTRY_BUF_SZ];
+	u32 count;
+	u32 channel[1];
+} wl_channels_in_country_t;
+
+typedef struct wl_country_list {
+	u32 buflen;
+	u32 band_set;
+	u32 band;
+	u32 count;
+	char country_abbrev[1];
+} wl_country_list_t;
+
+typedef struct wl_rm_req_elt {
+	s8 type;
+	s8 flags;
+	chanspec_t chanspec;
+	u32 token;		/* token for this measurement */
+	u32 tsf_h;		/* TSF high 32-bits of Measurement start time */
+	u32 tsf_l;		/* TSF low 32-bits */
+	u32 dur;		/* TUs */
+} wl_rm_req_elt_t;
+
+typedef struct wl_rm_req {
+	u32 token;		/* overall measurement set token */
+	u32 count;		/* number of measurement requests */
+	void *cb;		/* completion callback function: may be NULL */
+	void *cb_arg;		/* arg to completion callback function */
+	wl_rm_req_elt_t req[1];	/* variable length block of requests */
+} wl_rm_req_t;
+#define WL_RM_REQ_FIXED_LEN	offsetof(wl_rm_req_t, req)
+
+typedef struct wl_rm_rep_elt {
+	s8 type;
+	s8 flags;
+	chanspec_t chanspec;
+	u32 token;		/* token for this measurement */
+	u32 tsf_h;		/* TSF high 32-bits of Measurement start time */
+	u32 tsf_l;		/* TSF low 32-bits */
+	u32 dur;		/* TUs */
+	u32 len;		/* byte length of data block */
+	u8 data[1];		/* variable length data block */
+} wl_rm_rep_elt_t;
+#define WL_RM_REP_ELT_FIXED_LEN	24	/* length excluding data block */
+
+#define WL_RPI_REP_BIN_NUM 8
+typedef struct wl_rm_rpi_rep {
+	u8 rpi[WL_RPI_REP_BIN_NUM];
+	s8 rpi_max[WL_RPI_REP_BIN_NUM];
+} wl_rm_rpi_rep_t;
+
+typedef struct wl_rm_rep {
+	u32 token;		/* overall measurement set token */
+	u32 len;		/* length of measurement report block */
+	wl_rm_rep_elt_t rep[1];	/* variable length block of reports */
+} wl_rm_rep_t;
+#define WL_RM_REP_FIXED_LEN	8
+
+typedef struct wl_wsec_key {
+	u32 index;		/* key index */
+	u32 len;		/* key length */
+	u8 data[WLAN_MAX_KEY_LEN];	/* key data */
+	u32 pad_1[18];
+	u32 algo;		/* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
+	u32 flags;		/* misc flags */
+	u32 pad_2[2];
+	int pad_3;
+	int iv_initialized;	/* has IV been initialized already? */
+	int pad_4;
+	/* Rx IV */
+	struct {
+		u32 hi;	/* upper 32 bits of IV */
+		u16 lo;	/* lower 16 bits of IV */
+	} rxiv;
+	u32 pad_5[2];
+	u8 ea[ETH_ALEN];	/* per station */
+} wl_wsec_key_t;
+
+/* Used to get specific STA parameters */
+typedef struct {
+	u32 val;
+	u8 ea[ETH_ALEN];
+} scb_val_t;
+
+/* channel encoding */
+typedef struct channel_info {
+	int hw_channel;
+	int target_channel;
+	int scan_channel;
+} channel_info_t;
+
+/* Linux network driver ioctl encoding */
+typedef struct wl_ioctl {
+	uint cmd;		/* common ioctl definition */
+	void *buf;		/* pointer to user buffer */
+	uint len;		/* length of user buffer */
+	u8 set;		/* get or set request (optional) */
+	uint used;		/* bytes read or written (optional) */
+	uint needed;		/* bytes needed (optional) */
+} wl_ioctl_t;
+
 /* Common structure for module and instance linkage */
 typedef struct dhd_pub {
 	/* Linkage ponters */
@@ -122,6 +584,20 @@ typedef struct dhd_pub {
 
 } dhd_pub_t;
 
+typedef struct dhd_if_event {
+	u8 ifidx;
+	u8 action;
+	u8 flags;
+	u8 bssidx;
+} dhd_if_event_t;
+
+typedef struct {
+	u32 limit;		/* Expiration time (usec) */
+	u32 increment;	/* Current expiration increment (usec) */
+	u32 elapsed;		/* Current elapsed time (usec) */
+	u32 tick;		/* O/S tick time (usec) */
+} dhd_timeout_t;
+
 #if defined(CONFIG_PM_SLEEP)
 extern atomic_t dhd_mmc_suspend;
 #define DHD_PM_RESUME_WAIT_INIT(a) DECLARE_WAIT_QUEUE_HEAD(a);
@@ -167,7 +643,69 @@ extern atomic_t dhd_mmc_suspend;
 	} while (0)
 
 #endif	/* defined(CONFIG_PM_SLEEP) */
-#define DHD_IF_VIF	0x01	/* Virtual IF (Hidden from user) */
+
+/*
+ * Insmod parameters for debug/test
+ */
+
+/* Watchdog timer interval */
+extern uint dhd_watchdog_ms;
+
+#if defined(DHD_DEBUG)
+/* Console output poll interval */
+extern uint dhd_console_ms;
+#endif				/* defined(DHD_DEBUG) */
+
+/* Use interrupts */
+extern uint dhd_intr;
+
+/* Use polling */
+extern uint dhd_poll;
+
+/* ARP offload agent mode */
+extern uint dhd_arp_mode;
+
+/* ARP offload enable */
+extern uint dhd_arp_enable;
+
+/* Pkt filte enable control */
+extern uint dhd_pkt_filter_enable;
+
+/*  Pkt filter init setup */
+extern uint dhd_pkt_filter_init;
+
+/* Pkt filter mode control */
+extern uint dhd_master_mode;
+
+/* Roaming mode control */
+extern uint dhd_roam;
+
+/* Roaming mode control */
+extern uint dhd_radio_up;
+
+/* Initial idletime ticks (may be -1 for immediate idle, 0 for no idle) */
+extern int dhd_idletime;
+#define DHD_IDLETIME_TICKS 1
+
+/* SDIO Drive Strength */
+extern uint dhd_sdiod_drive_strength;
+
+/* Override to force tx queueing all the time */
+extern uint dhd_force_tx_queueing;
+
+#ifdef SDTEST
+/* Echo packet generator (SDIO), pkts/s */
+extern uint dhd_pktgen;
+
+/* Echo packet len (0 => sawtooth, max 1800) */
+extern uint dhd_pktgen_len;
+#define MAX_PKTGEN_LEN 1800
+#endif
+
+extern char fw_path[MOD_PARAM_PATHLEN];
+extern char nv_path[MOD_PARAM_PATHLEN];
+
+extern u32 g_assert_type;
 
 static inline void MUTEX_LOCK_INIT(dhd_pub_t *dhdp)
 {
@@ -205,13 +743,6 @@ static inline void MUTEX_UNLOCK_WL_SCAN_SET(void)
 {
 }
 
-typedef struct dhd_if_event {
-	u8 ifidx;
-	u8 action;
-	u8 flags;
-	u8 bssidx;
-} dhd_if_event_t;
-
 /*
  * Exported from dhd OS modules (dhd_linux/dhd_ndis)
  */
@@ -286,13 +817,6 @@ extern void dhd_os_sdtxunlock(dhd_pub_t *pub);
 
 int setScheduler(struct task_struct *p, int policy, struct sched_param *param);
 
-typedef struct {
-	u32 limit;		/* Expiration time (usec) */
-	u32 increment;	/* Current expiration increment (usec) */
-	u32 elapsed;		/* Current elapsed time (usec) */
-	u32 tick;		/* O/S tick time (usec) */
-} dhd_timeout_t;
-
 extern void dhd_timeout_start(dhd_timeout_t *tmo, uint usec);
 extern int dhd_timeout_expired(dhd_timeout_t *tmo);
 
@@ -324,85 +848,9 @@ extern int dhd_bus_devreset(dhd_pub_t *dhdp, u8 flag);
 extern uint dhd_bus_status(dhd_pub_t *dhdp);
 extern int dhd_bus_start(dhd_pub_t *dhdp);
 
-enum cust_gpio_modes {
-	WLAN_RESET_ON,
-	WLAN_RESET_OFF,
-	WLAN_POWER_ON,
-	WLAN_POWER_OFF
-};
-/*
- * Insmod parameters for debug/test
- */
-
-/* Watchdog timer interval */
-extern uint dhd_watchdog_ms;
-
-#if defined(DHD_DEBUG)
-/* Console output poll interval */
-extern uint dhd_console_ms;
-#endif				/* defined(DHD_DEBUG) */
-
-/* Use interrupts */
-extern uint dhd_intr;
-
-/* Use polling */
-extern uint dhd_poll;
-
-/* ARP offload agent mode */
-extern uint dhd_arp_mode;
-
-/* ARP offload enable */
-extern uint dhd_arp_enable;
-
-/* Pkt filte enable control */
-extern uint dhd_pkt_filter_enable;
-
-/*  Pkt filter init setup */
-extern uint dhd_pkt_filter_init;
-
-/* Pkt filter mode control */
-extern uint dhd_master_mode;
-
-/* Roaming mode control */
-extern uint dhd_roam;
-
-/* Roaming mode control */
-extern uint dhd_radio_up;
-
-/* Initial idletime ticks (may be -1 for immediate idle, 0 for no idle) */
-extern int dhd_idletime;
-#define DHD_IDLETIME_TICKS 1
-
-/* SDIO Drive Strength */
-extern uint dhd_sdiod_drive_strength;
-
-/* Override to force tx queueing all the time */
-extern uint dhd_force_tx_queueing;
-
-#ifdef SDTEST
-/* Echo packet generator (SDIO), pkts/s */
-extern uint dhd_pktgen;
-
-/* Echo packet len (0 => sawtooth, max 1800) */
-extern uint dhd_pktgen_len;
-#define MAX_PKTGEN_LEN 1800
-#endif
-
-/* optionally set by a module_param_string() */
-#define MOD_PARAM_PATHLEN	2048
-extern char fw_path[MOD_PARAM_PATHLEN];
-extern char nv_path[MOD_PARAM_PATHLEN];
-
-/* For supporting multiple interfaces */
-#define DHD_MAX_IFS	16
-#define DHD_DEL_IF	-0xe
-#define DHD_BAD_IF	-0xf
-
 extern void dhd_wait_for_event(dhd_pub_t *dhd, bool * lockvar);
 extern void dhd_wait_event_wakeup(dhd_pub_t *dhd);
 
-extern u32 g_assert_type;
-
 #ifdef BCMDBG
 #define ASSERT(exp) \
 	  do { if (!(exp)) osl_assert(#exp, __FILE__, __LINE__); } while (0)
@@ -411,4 +859,84 @@ extern void osl_assert(char *exp, char *file, int line);
 #define ASSERT(exp)	do {} while (0)
 #endif  /* defined(BCMDBG) */
 
+/* Linux network driver ioctl encoding */
+typedef struct dhd_ioctl {
+	uint cmd;		/* common ioctl definition */
+	void *buf;		/* pointer to user buffer */
+	uint len;		/* length of user buffer */
+	bool set;		/* get or set request (optional) */
+	uint used;		/* bytes read or written (optional) */
+	uint needed;		/* bytes needed (optional) */
+	uint driver;		/* to identify target driver */
+} dhd_ioctl_t;
+
+/* per-driver magic numbers */
+#define DHD_IOCTL_MAGIC		0x00444944
+
+/* bump this number if you change the ioctl interface */
+#define DHD_IOCTL_VERSION	1
+
+#define	DHD_IOCTL_MAXLEN	8192	/* max length ioctl buffer required */
+#define	DHD_IOCTL_SMLEN	256	/* "small" length ioctl buffer required */
+
+/* common ioctl definitions */
+#define DHD_GET_MAGIC				0
+#define DHD_GET_VERSION				1
+#define DHD_GET_VAR				2
+#define DHD_SET_VAR				3
+
+/* message levels */
+#define DHD_ERROR_VAL	0x0001
+#define DHD_TRACE_VAL	0x0002
+#define DHD_INFO_VAL	0x0004
+#define DHD_DATA_VAL	0x0008
+#define DHD_CTL_VAL	0x0010
+#define DHD_TIMER_VAL	0x0020
+#define DHD_HDRS_VAL	0x0040
+#define DHD_BYTES_VAL	0x0080
+#define DHD_INTR_VAL	0x0100
+#define DHD_LOG_VAL	0x0200
+#define DHD_GLOM_VAL	0x0400
+#define DHD_EVENT_VAL	0x0800
+#define DHD_BTA_VAL	0x1000
+#define DHD_ISCAN_VAL 0x2000
+
+#ifdef SDTEST
+/* For pktgen iovar */
+typedef struct dhd_pktgen {
+	uint version;		/* To allow structure change tracking */
+	uint freq;		/* Max ticks between tx/rx attempts */
+	uint count;		/* Test packets to send/rcv each attempt */
+	uint print;		/* Print counts every <print> attempts */
+	uint total;		/* Total packets (or bursts) */
+	uint minlen;		/* Minimum length of packets to send */
+	uint maxlen;		/* Maximum length of packets to send */
+	uint numsent;		/* Count of test packets sent */
+	uint numrcvd;		/* Count of test packets received */
+	uint numfail;		/* Count of test send failures */
+	uint mode;		/* Test mode (type of test packets) */
+	uint stop;		/* Stop after this many tx failures */
+} dhd_pktgen_t;
+
+/* Version in case structure changes */
+#define DHD_PKTGEN_VERSION 2
+
+/* Type of test packets to use */
+#define DHD_PKTGEN_ECHO		1	/* Send echo requests */
+#define DHD_PKTGEN_SEND		2	/* Send discard packets */
+#define DHD_PKTGEN_RXBURST	3	/* Request dongle send N packets */
+#define DHD_PKTGEN_RECV		4	/* Continuous rx from continuous
+					 tx dongle */
+#endif				/* SDTEST */
+
+/* Enter idle immediately (no timeout) */
+#define DHD_IDLE_IMMEDIATE	(-1)
+
+/* Values for idleclock iovar: other values are the sd_divisor to use
+	 when idle */
+#define DHD_IDLE_ACTIVE	0	/* Do not request any SD clock change
+				 when idle */
+#define DHD_IDLE_STOP   (-1)	/* Request SD clock be stopped
+				 (and use SD1 mode) */
+
 #endif				/* _dhd_h_ */
diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_common.c b/drivers/staging/brcm80211/brcmfmac/dhd_common.c
index 0bfb93c0075a..5aa5ee42a4a4 100644
--- a/drivers/staging/brcm80211/brcmfmac/dhd_common.c
+++ b/drivers/staging/brcm80211/brcmfmac/dhd_common.c
@@ -24,7 +24,6 @@
 #include <dhd_proto.h>
 #include <dhd_dbg.h>
 #include <msgtrace.h>
-#include <wlioctl.h>
 
 int dhd_msg_level;
 char fw_path[MOD_PARAM_PATHLEN];
diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_custom_gpio.c b/drivers/staging/brcm80211/brcmfmac/dhd_custom_gpio.c
index 1cf6c5dc2bb7..abd41e3ffca1 100644
--- a/drivers/staging/brcm80211/brcmfmac/dhd_custom_gpio.c
+++ b/drivers/staging/brcm80211/brcmfmac/dhd_custom_gpio.c
@@ -20,7 +20,6 @@
 #include <dngl_stats.h>
 #include <dhd.h>
 
-#include <wlioctl.h>
 #include <wl_iw.h>
 
 #define WL_ERROR(fmt, args...) printk(fmt, ##args)
diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_proto.h b/drivers/staging/brcm80211/brcmfmac/dhd_proto.h
index 030d5ffb0e83..16b8942f78c0 100644
--- a/drivers/staging/brcm80211/brcmfmac/dhd_proto.h
+++ b/drivers/staging/brcm80211/brcmfmac/dhd_proto.h
@@ -18,7 +18,6 @@
 #define _dhd_proto_h_
 
 #include <dhdioctl.h>
-#include <wlioctl.h>
 
 #ifndef IOCTL_RESP_TIMEOUT
 #define IOCTL_RESP_TIMEOUT  2000	/* In milli second */
diff --git a/drivers/staging/brcm80211/brcmfmac/dhdioctl.h b/drivers/staging/brcm80211/brcmfmac/dhdioctl.h
index f0ba53558ccd..db0b9e88137b 100644
--- a/drivers/staging/brcm80211/brcmfmac/dhdioctl.h
+++ b/drivers/staging/brcm80211/brcmfmac/dhdioctl.h
@@ -17,84 +17,4 @@
 #ifndef _dhdioctl_h_
 #define	_dhdioctl_h_
 
-/* Linux network driver ioctl encoding */
-typedef struct dhd_ioctl {
-	uint cmd;		/* common ioctl definition */
-	void *buf;		/* pointer to user buffer */
-	uint len;		/* length of user buffer */
-	bool set;		/* get or set request (optional) */
-	uint used;		/* bytes read or written (optional) */
-	uint needed;		/* bytes needed (optional) */
-	uint driver;		/* to identify target driver */
-} dhd_ioctl_t;
-
-/* per-driver magic numbers */
-#define DHD_IOCTL_MAGIC		0x00444944
-
-/* bump this number if you change the ioctl interface */
-#define DHD_IOCTL_VERSION	1
-
-#define	DHD_IOCTL_MAXLEN	8192	/* max length ioctl buffer required */
-#define	DHD_IOCTL_SMLEN	256	/* "small" length ioctl buffer required */
-
-/* common ioctl definitions */
-#define DHD_GET_MAGIC				0
-#define DHD_GET_VERSION				1
-#define DHD_GET_VAR				2
-#define DHD_SET_VAR				3
-
-/* message levels */
-#define DHD_ERROR_VAL	0x0001
-#define DHD_TRACE_VAL	0x0002
-#define DHD_INFO_VAL	0x0004
-#define DHD_DATA_VAL	0x0008
-#define DHD_CTL_VAL	0x0010
-#define DHD_TIMER_VAL	0x0020
-#define DHD_HDRS_VAL	0x0040
-#define DHD_BYTES_VAL	0x0080
-#define DHD_INTR_VAL	0x0100
-#define DHD_LOG_VAL	0x0200
-#define DHD_GLOM_VAL	0x0400
-#define DHD_EVENT_VAL	0x0800
-#define DHD_BTA_VAL	0x1000
-#define DHD_ISCAN_VAL 0x2000
-
-#ifdef SDTEST
-/* For pktgen iovar */
-typedef struct dhd_pktgen {
-	uint version;		/* To allow structure change tracking */
-	uint freq;		/* Max ticks between tx/rx attempts */
-	uint count;		/* Test packets to send/rcv each attempt */
-	uint print;		/* Print counts every <print> attempts */
-	uint total;		/* Total packets (or bursts) */
-	uint minlen;		/* Minimum length of packets to send */
-	uint maxlen;		/* Maximum length of packets to send */
-	uint numsent;		/* Count of test packets sent */
-	uint numrcvd;		/* Count of test packets received */
-	uint numfail;		/* Count of test send failures */
-	uint mode;		/* Test mode (type of test packets) */
-	uint stop;		/* Stop after this many tx failures */
-} dhd_pktgen_t;
-
-/* Version in case structure changes */
-#define DHD_PKTGEN_VERSION 2
-
-/* Type of test packets to use */
-#define DHD_PKTGEN_ECHO		1	/* Send echo requests */
-#define DHD_PKTGEN_SEND		2	/* Send discard packets */
-#define DHD_PKTGEN_RXBURST	3	/* Request dongle send N packets */
-#define DHD_PKTGEN_RECV		4	/* Continuous rx from continuous
-					 tx dongle */
-#endif				/* SDTEST */
-
-/* Enter idle immediately (no timeout) */
-#define DHD_IDLE_IMMEDIATE	(-1)
-
-/* Values for idleclock iovar: other values are the sd_divisor to use
-	 when idle */
-#define DHD_IDLE_ACTIVE	0	/* Do not request any SD clock change
-				 when idle */
-#define DHD_IDLE_STOP   (-1)	/* Request SD clock be stopped
-				 (and use SD1 mode) */
-
 #endif				/* _dhdioctl_h_ */
diff --git a/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c
index 1827b0bf9201..bf57e18c791e 100644
--- a/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.c
@@ -24,7 +24,6 @@
 #include <dngl_stats.h>
 #include <dhd.h>
 #include <dhdioctl.h>
-#include <wlioctl.h>
 
 #include <linux/kthread.h>
 #include <linux/netdevice.h>
diff --git a/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h
index 996033cf9b09..4bd039284686 100644
--- a/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h
+++ b/drivers/staging/brcm80211/brcmfmac/wl_cfg80211.h
@@ -20,7 +20,6 @@
 #include <linux/wireless.h>
 #include <linux/wireless.h>
 #include <net/cfg80211.h>
-#include <wlioctl.h>
 
 struct wl_conf;
 struct wl_iface;
diff --git a/drivers/staging/brcm80211/brcmfmac/wl_iw.c b/drivers/staging/brcm80211/brcmfmac/wl_iw.c
index 929ceaf363be..b284b127f90a 100644
--- a/drivers/staging/brcm80211/brcmfmac/wl_iw.c
+++ b/drivers/staging/brcm80211/brcmfmac/wl_iw.c
@@ -18,7 +18,6 @@
 #include <linux/semaphore.h>
 #include <bcmdefs.h>
 #include <linux/netdevice.h>
-#include <wlioctl.h>
 
 #include <bcmutils.h>
 
@@ -30,7 +29,6 @@
 #include <dhdioctl.h>
 #include <linux/ieee80211.h>
 typedef const struct si_pub si_t;
-#include <wlioctl.h>
 
 #include <dngl_stats.h>
 #include <dhd.h>
@@ -115,6 +113,24 @@ typedef struct iscan_info {
 } iscan_info_t;
 iscan_info_t *g_iscan;
 
+typedef enum sup_auth_status {
+	WLC_SUP_DISCONNECTED = 0,
+	WLC_SUP_CONNECTING,
+	WLC_SUP_IDREQUIRED,
+	WLC_SUP_AUTHENTICATING,
+	WLC_SUP_AUTHENTICATED,
+	WLC_SUP_KEYXCHANGE,
+	WLC_SUP_KEYED,
+	WLC_SUP_TIMEOUT,
+	WLC_SUP_LAST_BASIC_STATE,
+	WLC_SUP_KEYXCHANGE_WAIT_M1 = WLC_SUP_AUTHENTICATED,
+	WLC_SUP_KEYXCHANGE_PREP_M2 = WLC_SUP_KEYXCHANGE,
+	WLC_SUP_KEYXCHANGE_WAIT_M3 = WLC_SUP_LAST_BASIC_STATE,
+	WLC_SUP_KEYXCHANGE_PREP_M4,
+	WLC_SUP_KEYXCHANGE_WAIT_G1,
+	WLC_SUP_KEYXCHANGE_PREP_G2
+} sup_auth_status_t;
+
 static const u8 ether_bcast[ETH_ALEN] = {255, 255, 255, 255, 255, 255};
 
 /* Global ASSERT type flag */
diff --git a/drivers/staging/brcm80211/brcmfmac/wl_iw.h b/drivers/staging/brcm80211/brcmfmac/wl_iw.h
index fe06174cee7d..c92a8b5c59c3 100644
--- a/drivers/staging/brcm80211/brcmfmac/wl_iw.h
+++ b/drivers/staging/brcm80211/brcmfmac/wl_iw.h
@@ -19,8 +19,6 @@
 
 #include <linux/wireless.h>
 
-#include <wlioctl.h>
-
 #define WL_SCAN_PARAMS_SSID_MAX	10
 #define GET_SSID	"SSID="
 #define GET_CHANNEL	"CH="
diff --git a/drivers/staging/brcm80211/brcmsmac/bcmsrom_tbl.h b/drivers/staging/brcm80211/brcmsmac/bcmsrom_tbl.h
index f4b3e61dc37d..a41e62cb8f61 100644
--- a/drivers/staging/brcm80211/brcmsmac/bcmsrom_tbl.h
+++ b/drivers/staging/brcm80211/brcmsmac/bcmsrom_tbl.h
@@ -17,8 +17,6 @@
 #ifndef	_bcmsrom_tbl_h_
 #define	_bcmsrom_tbl_h_
 
-#include "wlioctl.h"
-
 typedef struct {
 	const char *name;
 	u32 revmask;
diff --git a/drivers/staging/brcm80211/brcmsmac/d11.h b/drivers/staging/brcm80211/brcmsmac/d11.h
index d91e4189a3e8..cb434e51f861 100644
--- a/drivers/staging/brcm80211/brcmsmac/d11.h
+++ b/drivers/staging/brcm80211/brcmsmac/d11.h
@@ -17,14 +17,9 @@
 #ifndef	_D11_H
 #define	_D11_H
 
+#include <linux/ieee80211.h>
 #include <sbconfig.h>
 
-#ifndef WL_RSSI_ANT_MAX
-#define WL_RSSI_ANT_MAX		4	/* max possible rx antennas */
-#elif WL_RSSI_ANT_MAX != 4
-#error "WL_RSSI_ANT_MAX does not match"
-#endif
-
 /* cpp contortions to concatenate w/arg prescan */
 #ifndef	PAD
 #define	_PADLINE(line)	pad ## line
@@ -56,6 +51,12 @@
 #define	TX_DATA_FIFO		TX_AC_BE_FIFO
 #define	TX_CTL_FIFO		TX_AC_VO_FIFO
 
+#ifndef WL_RSSI_ANT_MAX
+#define WL_RSSI_ANT_MAX		4	/* max possible rx antennas */
+#elif WL_RSSI_ANT_MAX != 4
+#error "WL_RSSI_ANT_MAX does not match"
+#endif
+
 typedef volatile struct {
 	u32 intstatus;
 	u32 intmask;
diff --git a/drivers/staging/brcm80211/brcmsmac/phy/wlc_phy_hal.h b/drivers/staging/brcm80211/brcmsmac/phy/wlc_phy_hal.h
index 1ef96c733e2f..93e3db993ae7 100644
--- a/drivers/staging/brcm80211/brcmsmac/phy/wlc_phy_hal.h
+++ b/drivers/staging/brcm80211/brcmsmac/phy/wlc_phy_hal.h
@@ -14,14 +14,18 @@
  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
+/*
+ * wlc_phy_hal.h:  functionality exported from the phy to higher layers
+ */
+
 #ifndef _wlc_phy_h_
 #define _wlc_phy_h_
 
-#include <wlioctl.h>
 #include <aiutils.h>
 #include <d11.h>
 #include <wlc_phy_shim.h>
 #include <net/mac80211.h>	/* struct wiphy */
+#include "bcmwifi.h"		/* chanspec_t */
 
 #define	IDCODE_VER_MASK		0x0000000f
 #define	IDCODE_VER_SHIFT	0
@@ -87,12 +91,20 @@
 
 #define WLC_TXPWR_DB_FACTOR	4
 
+/* a large TX Power as an init value to factor out of min() calculations,
+ * keep low enough to fit in an s8, units are .25 dBm
+ */
+#define WLC_TXPWR_MAX		(127)	/* ~32 dBm = 1,500 mW */
+
 #define WLC_NUM_RATES_CCK           4
 #define WLC_NUM_RATES_OFDM          8
 #define WLC_NUM_RATES_MCS_1_STREAM  8
 #define WLC_NUM_RATES_MCS_2_STREAM  8
 #define WLC_NUM_RATES_MCS_3_STREAM  8
 #define WLC_NUM_RATES_MCS_4_STREAM  8
+
+#define	WLC_RSSI_INVALID	 0	/* invalid RSSI value */
+
 typedef struct txpwr_limits {
 	u8 cck[WLC_NUM_RATES_CCK];
 	u8 ofdm[WLC_NUM_RATES_OFDM];
@@ -114,6 +126,32 @@ typedef struct txpwr_limits {
 	u8 mcs32;
 } txpwr_limits_t;
 
+typedef struct {
+	u32 flags;
+	chanspec_t chanspec;	/* txpwr report for this channel */
+	chanspec_t local_chanspec;	/* channel on which we are associated */
+	u8 local_max;	/* local max according to the AP */
+	u8 local_constraint;	/* local constraint according to the AP */
+	s8 antgain[2];	/* Ant gain for each band - from SROM */
+	u8 rf_cores;		/* count of RF Cores being reported */
+	u8 est_Pout[4];	/* Latest tx power out estimate per RF chain */
+	u8 est_Pout_act[4];	/* Latest tx power out estimate per RF chain
+				 * without adjustment
+				 */
+	u8 est_Pout_cck;	/* Latest CCK tx power out estimate */
+	u8 tx_power_max[4];	/* Maximum target power among all rates */
+	u8 tx_power_max_rate_ind[4];	/* Index of the rate with the max target power */
+	u8 user_limit[WL_TX_POWER_RATES];	/* User limit */
+	u8 reg_limit[WL_TX_POWER_RATES];	/* Regulatory power limit */
+	u8 board_limit[WL_TX_POWER_RATES];	/* Max power board can support (SROM) */
+	u8 target[WL_TX_POWER_RATES];	/* Latest target power */
+} tx_power_t;
+
+typedef struct tx_inst_power {
+	u8 txpwr_est_Pout[2];	/* Latest estimate for 2.4 and 5 Ghz */
+	u8 txpwr_est_Pout_gofdm;	/* Pwr estimate for 2.4 OFDM */
+} tx_inst_power_t;
+
 typedef struct {
 	u8 vec[MAXCHANNEL / NBBY];
 } chanvec_t;
diff --git a/drivers/staging/brcm80211/brcmsmac/wl_dbg.h b/drivers/staging/brcm80211/brcmsmac/wl_dbg.h
index 5582de3ee721..8cc6b1a2a8c2 100644
--- a/drivers/staging/brcm80211/brcmsmac/wl_dbg.h
+++ b/drivers/staging/brcm80211/brcmsmac/wl_dbg.h
@@ -19,7 +19,7 @@
 
 #include <linux/device.h>			/* dev_err() */
 
-/* wl_msg_level is a bit vector with defs in wlioctl.h */
+/* wl_msg_level is a bit vector with defs in bcmdefs.h */
 extern u32 wl_msg_level;
 
 #define BCMMSG(dev, fmt, args...)		\
diff --git a/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c b/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
index f951f22fd2ea..105f426c42b3 100644
--- a/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
+++ b/drivers/staging/brcm80211/brcmsmac/wl_mac80211.c
@@ -32,7 +32,6 @@
 #include <bcmutils.h>
 #include <bcmnvram.h>
 #include <pcicfg.h>
-#include <wlioctl.h>
 #include <sbhnddma.h>
 
 #include "phy/wlc_phy_int.h"
diff --git a/drivers/staging/brcm80211/brcmsmac/wl_mac80211.h b/drivers/staging/brcm80211/brcmsmac/wl_mac80211.h
index c878690c0627..fafde6a12566 100644
--- a/drivers/staging/brcm80211/brcmsmac/wl_mac80211.h
+++ b/drivers/staging/brcm80211/brcmsmac/wl_mac80211.h
@@ -17,6 +17,10 @@
 #ifndef _wl_mac80211_h_
 #define _wl_mac80211_h_
 
+/* softmac ioctl definitions */
+#define WLC_SET_SHORTSLOT_OVERRIDE		146
+
+
 /* BMAC Note: High-only driver is no longer working in softirq context as it needs to block and
  * sleep so perimeter lock has to be a semaphore instead of spinlock. This requires timers to be
  * submitted to workqueue instead of being on kernel timer
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_alloc.c b/drivers/staging/brcm80211/brcmsmac/wlc_alloc.c
index 3c4b2c01edd0..3b04e02dae03 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_alloc.c
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_alloc.c
@@ -19,7 +19,6 @@
 #include <bcmdefs.h>
 #include <bcmutils.h>
 #include <aiutils.h>
-#include <wlioctl.h>
 #include <sbhnddma.h>
 
 #include "d11.h"
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c b/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c
index 75343ab8a82f..c83896b04a2a 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c
@@ -19,7 +19,6 @@
 #include <bcmdefs.h>
 #include <bcmutils.h>
 #include <aiutils.h>
-#include <wlioctl.h>
 #include <sbhnddma.h>
 #include <hnddma.h>
 #include <d11.h>
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_antsel.c b/drivers/staging/brcm80211/brcmsmac/wlc_antsel.c
index 111ef32b7ac4..efdc62a8fe58 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_antsel.c
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_antsel.c
@@ -26,7 +26,6 @@
 #include <aiutils.h>
 #include <bcmdevs.h>
 #include <sbhnddma.h>
-#include <wlioctl.h>
 
 #include "d11.h"
 #include "wlc_rate.h"
@@ -39,9 +38,15 @@
 #include "wlc_channel.h"
 #include "wlc_main.h"
 #include "wl_export.h"
-#include "wlc_phy_shim.h"
 #include "wlc_antsel.h"
 
+#define ANT_SELCFG_AUTO		0x80	/* bit indicates antenna sel AUTO */
+#define ANT_SELCFG_MASK		0x33	/* antenna configuration mask */
+#define ANT_SELCFG_TX_UNICAST	0	/* unicast tx antenna configuration */
+#define ANT_SELCFG_RX_UNICAST	1	/* unicast rx antenna configuration */
+#define ANT_SELCFG_TX_DEF	2	/* default tx antenna configuration */
+#define ANT_SELCFG_RX_DEF	3	/* default rx antenna configuration */
+
 /* useful macros */
 #define WLC_ANTSEL_11N_0(ant)	((((ant) & ANT_SELCFG_MASK) >> 4) & 0xf)
 #define WLC_ANTSEL_11N_1(ant)	(((ant) & ANT_SELCFG_MASK) & 0xf)
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c b/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c
index 9ef77072408b..adc06fc143a5 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c
@@ -30,7 +30,6 @@
 #include <bcmotp.h>
 #include <bcmutils.h>
 #include <bcmnvram.h>
-#include <wlioctl.h>
 #include <sbconfig.h>
 #include <sbchipc.h>
 #include <pcicfg.h>
@@ -45,7 +44,6 @@
 #include "wlc_scb.h"
 #include "wlc_pub.h"
 #include "wlc_key.h"
-#include "wlc_phy_shim.h"
 #include "phy/wlc_phy_hal.h"
 #include "wlc_channel.h"
 #include "wlc_main.h"
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_channel.c b/drivers/staging/brcm80211/brcmsmac/wlc_channel.c
index a3a2bf9b4f12..9e293395e5f1 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_channel.c
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_channel.c
@@ -24,7 +24,6 @@
 #include <bcmnvram.h>
 #include <aiutils.h>
 #include <sbhnddma.h>
-#include <wlioctl.h>
 
 #include "wlc_types.h"
 #include "d11.h"
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_key.h b/drivers/staging/brcm80211/brcmsmac/wlc_key.h
index cab10c737937..f4bced533d9a 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_key.h
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_key.h
@@ -17,6 +17,8 @@
 #ifndef _wlc_key_h_
 #define _wlc_key_h_
 
+#include <linux/if_ether.h>	/* for ETH_ALEN */
+
 struct scb;
 struct wlc_info;
 struct wlc_bsscfg;
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_main.c b/drivers/staging/brcm80211/brcmsmac/wlc_main.c
index c1257d4d9f2b..0837e8d07593 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_main.c
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_main.c
@@ -27,7 +27,6 @@
 #include <aiutils.h>
 #include <pcicfg.h>
 #include <bcmsrom.h>
-#include <wlioctl.h>
 #include <sbhnddma.h>
 #include <hnddma.h>
 
@@ -45,14 +44,12 @@
 #include "wlc_main.h"
 #include "wlc_bmac.h"
 #include "wlc_phy_hal.h"
-#include "wlc_phy_shim.h"
 #include "wlc_antsel.h"
 #include "wlc_stf.h"
 #include "wlc_ampdu.h"
 #include "wl_export.h"
 #include "wlc_alloc.h"
 #include "wl_dbg.h"
-
 #include "wl_mac80211.h"
 
 /*
@@ -93,6 +90,30 @@
 
 #define	TBTT_ALIGN_LEEWAY_US	100	/* min leeway before first TBTT in us */
 
+/* Software feature flag defines used by wlfeatureflag */
+#define WL_SWFL_NOHWRADIO	0x0004
+#define WL_SWFL_FLOWCONTROL     0x0008	/* Enable backpressure to OS stack */
+#define WL_SWFL_WLBSSSORT	0x0010	/* Per-port supports sorting of BSS */
+
+/* n-mode support capability */
+/* 2x2 includes both 1x1 & 2x2 devices
+ * reserved #define 2 for future when we want to separate 1x1 & 2x2 and
+ * control it independently
+ */
+#define WL_11N_2x2			1
+#define WL_11N_3x3			3
+#define WL_11N_4x4			4
+
+/* define 11n feature disable flags */
+#define WLFEATURE_DISABLE_11N		0x00000001
+#define WLFEATURE_DISABLE_11N_STBC_TX	0x00000002
+#define WLFEATURE_DISABLE_11N_STBC_RX	0x00000004
+#define WLFEATURE_DISABLE_11N_SGI_TX	0x00000008
+#define WLFEATURE_DISABLE_11N_SGI_RX	0x00000010
+#define WLFEATURE_DISABLE_11N_AMPDU_TX	0x00000020
+#define WLFEATURE_DISABLE_11N_AMPDU_RX	0x00000040
+#define WLFEATURE_DISABLE_11N_GF	0x00000080
+
 /*
  * driver maintains internal 'tick'(wlc->pub->now) which increments in 1s OS timer(soft
  * watchdog) it is not a wall clock and won't increment when driver is in "down" state
@@ -2428,7 +2449,6 @@ _wlc_ioctl(struct wlc_info *wlc, int cmd, void *arg, int len,
 	struct scb *nextscb;
 	bool ta_ok;
 	uint band;
-	rw_reg_t *r;
 	struct wlc_bsscfg *bsscfg;
 	wlc_bss_info_t *current_bss;
 
@@ -2440,7 +2460,6 @@ _wlc_ioctl(struct wlc_info *wlc, int cmd, void *arg, int len,
 	nextscb = NULL;
 	ta_ok = false;
 	band = 0;
-	r = NULL;
 
 	/* If the device is turned off, then it's not "removed" */
 	if (!wlc->pub->hw_off && DEVICEREMOVED(wlc)) {
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_main.h b/drivers/staging/brcm80211/brcmsmac/wlc_main.h
index edbf3d244c77..3bbb774f4870 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_main.h
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_main.h
@@ -290,7 +290,7 @@ struct wlcband {
 	wlc_phy_t *pi;		/* pointer to phy specific information */
 	bool abgphy_encore;
 
-	u8 gmode;		/* currently active gmode (see wlioctl.h) */
+	u8 gmode;		/* currently active gmode */
 
 	struct scb *hwrs_scb;	/* permanent scb for hw rateset */
 
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_phy_shim.c b/drivers/staging/brcm80211/brcmsmac/wlc_phy_shim.c
index 16fea021f4a5..c33b61bd95a3 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_phy_shim.c
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_phy_shim.c
@@ -30,7 +30,6 @@
 #include <bcmutils.h>
 #include <bcmwifi.h>
 #include <aiutils.h>
-#include <wlioctl.h>
 #include <sbconfig.h>
 #include <sbchipc.h>
 #include <pcicfg.h>
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_phy_shim.h b/drivers/staging/brcm80211/brcmsmac/wlc_phy_shim.h
index c151a5d8c693..124d3fbc229e 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_phy_shim.h
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_phy_shim.h
@@ -14,6 +14,10 @@
  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
+/*
+ * wlc_phy_shim.h: stuff defined in wlc_phy_shim.c and included only by the phy
+ */
+
 #ifndef _wlc_phy_shim_h_
 #define _wlc_phy_shim_h_
 
@@ -51,6 +55,57 @@
 #define	ANT_RX_DIV_ENABLE		3	/* APHY bbConfig Enable RX Diversity */
 #define ANT_RX_DIV_DEF		ANT_RX_DIV_START_0	/* default antdiv setting */
 
+#define WL_ANT_RX_MAX		2	/* max 2 receive antennas */
+#define WL_ANT_HT_RX_MAX	3	/* max 3 receive antennas/cores */
+#define WL_ANT_IDX_1		0	/* antenna index 1 */
+#define WL_ANT_IDX_2		1	/* antenna index 2 */
+
+/* values for n_preamble_type */
+#define WLC_N_PREAMBLE_MIXEDMODE	0
+#define WLC_N_PREAMBLE_GF		1
+#define WLC_N_PREAMBLE_GF_BRCM          2
+
+#define WL_TX_POWER_RATES_LEGACY	45
+#define WL_TX_POWER_MCS20_FIRST	        12
+#define WL_TX_POWER_MCS20_NUM	        16
+#define WL_TX_POWER_MCS40_FIRST	        28
+#define WL_TX_POWER_MCS40_NUM	        17
+
+
+#define WL_TX_POWER_RATES	       101
+#define WL_TX_POWER_CCK_FIRST	       0
+#define WL_TX_POWER_CCK_NUM	       4
+#define WL_TX_POWER_OFDM_FIRST	       4	/* Index for first 20MHz OFDM SISO rate */
+#define WL_TX_POWER_OFDM20_CDD_FIRST   12	/* Index for first 20MHz OFDM CDD rate */
+#define WL_TX_POWER_OFDM40_SISO_FIRST  52	/* Index for first 40MHz OFDM SISO rate */
+#define WL_TX_POWER_OFDM40_CDD_FIRST   60	/* Index for first 40MHz OFDM CDD rate */
+#define WL_TX_POWER_OFDM_NUM	       8
+#define WL_TX_POWER_MCS20_SISO_FIRST   20	/* Index for first 20MHz MCS SISO rate */
+#define WL_TX_POWER_MCS20_CDD_FIRST    28	/* Index for first 20MHz MCS CDD rate */
+#define WL_TX_POWER_MCS20_STBC_FIRST   36	/* Index for first 20MHz MCS STBC rate */
+#define WL_TX_POWER_MCS20_SDM_FIRST    44	/* Index for first 20MHz MCS SDM rate */
+#define WL_TX_POWER_MCS40_SISO_FIRST   68	/* Index for first 40MHz MCS SISO rate */
+#define WL_TX_POWER_MCS40_CDD_FIRST    76	/* Index for first 40MHz MCS CDD rate */
+#define WL_TX_POWER_MCS40_STBC_FIRST   84	/* Index for first 40MHz MCS STBC rate */
+#define WL_TX_POWER_MCS40_SDM_FIRST    92	/* Index for first 40MHz MCS SDM rate */
+#define WL_TX_POWER_MCS_1_STREAM_NUM   8
+#define WL_TX_POWER_MCS_2_STREAM_NUM   8
+#define WL_TX_POWER_MCS_32	       100	/* Index for 40MHz rate MCS 32 */
+#define WL_TX_POWER_MCS_32_NUM	       1
+
+/* sslpnphy specifics */
+#define WL_TX_POWER_MCS20_SISO_FIRST_SSN   12	/* Index for first 20MHz MCS SISO rate */
+
+/* tx_power_t.flags bits */
+#define WL_TX_POWER_F_ENABLED	1
+#define WL_TX_POWER_F_HW	2
+#define WL_TX_POWER_F_MIMO	4
+#define WL_TX_POWER_F_SISO	8
+
+/* values to force tx/rx chain */
+#define WLC_N_TXRX_CHAIN0		0
+#define WLC_N_TXRX_CHAIN1		1
+
 /* Forward declarations */
 struct wlc_hw_info;
 typedef struct wlc_phy_shim_info wlc_phy_shim_info_t;
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_pub.h b/drivers/staging/brcm80211/brcmsmac/wlc_pub.h
index b3a79ab6f0a1..2bbf9952afc5 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_pub.h
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_pub.h
@@ -17,6 +17,9 @@
 #ifndef _wlc_pub_h_
 #define _wlc_pub_h_
 
+#include "proto/802.11.h"	/* for MCSSET_LEN */
+#include "bcmwifi.h"		/* for chanspec_t */
+
 #define	WLC_NUMRATES	16	/* max # of rates in a rateset */
 #define	MAXMULTILIST	32	/* max # multicast addresses */
 #define	D11_PHY_HDR_LEN	6	/* Phy header length - 6 bytes */
@@ -96,6 +99,12 @@
 #define AIDMAPSZ	(roundup(MAXSCB, NBBY)/NBBY)	/* aid bitmap size in bytes */
 #endif				/* AIDMAPSZ */
 
+#define MAX_STREAMS_SUPPORTED	4	/* max number of streams supported */
+
+#define	WL_SPURAVOID_OFF	0
+#define	WL_SPURAVOID_ON1	1
+#define	WL_SPURAVOID_ON2	2
+
 struct ieee80211_tx_queue_params;
 
 typedef struct wlc_tunables {
@@ -151,7 +160,7 @@ struct rsn_parms {
 	IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_GRN_FLD |\
 	IEEE80211_HT_CAP_MAX_AMSDU | IEEE80211_HT_CAP_DSSSCCK40)
 
-/* wlc internal bss_info, wl external one is in wlioctl.h */
+/* wlc internal bss_info */
 typedef struct wlc_bss_info {
 	u8 BSSID[ETH_ALEN];	/* network BSSID */
 	u16 flags;		/* flags for internal attributes */
@@ -489,6 +498,98 @@ extern const u8 wme_fifo2ac[];
 #define	WLC_PROT_N_PAM_OVR	15	/* n preamble override */
 #define	WLC_PROT_N_OBSS		16	/* non-HT OBSS present */
 
+/*
+ * 54g modes (basic bits may still be overridden)
+ *
+ * GMODE_LEGACY_B			Rateset: 1b, 2b, 5.5, 11
+ *					Preamble: Long
+ *					Shortslot: Off
+ * GMODE_AUTO				Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54
+ *					Extended Rateset: 6, 9, 12, 48
+ *					Preamble: Long
+ *					Shortslot: Auto
+ * GMODE_ONLY				Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54
+ *					Extended Rateset: 6b, 9, 12b, 48
+ *					Preamble: Short required
+ *					Shortslot: Auto
+ * GMODE_B_DEFERRED			Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54
+ *					Extended Rateset: 6, 9, 12, 48
+ *					Preamble: Long
+ *					Shortslot: On
+ * GMODE_PERFORMANCE			Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54
+ *					Preamble: Short required
+ *					Shortslot: On and required
+ * GMODE_LRS				Rateset: 1b, 2b, 5.5b, 11b
+ *					Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54
+ *					Preamble: Long
+ *					Shortslot: Auto
+ */
+#define GMODE_LEGACY_B		0
+#define GMODE_AUTO		1
+#define GMODE_ONLY		2
+#define GMODE_B_DEFERRED	3
+#define GMODE_PERFORMANCE	4
+#define GMODE_LRS		5
+#define GMODE_MAX		6
+
+/* values for PLCPHdr_override */
+#define WLC_PLCP_AUTO	-1
+#define WLC_PLCP_SHORT	0
+#define WLC_PLCP_LONG	1
+
+/* values for g_protection_override and n_protection_override */
+#define WLC_PROTECTION_AUTO		-1
+#define WLC_PROTECTION_OFF		0
+#define WLC_PROTECTION_ON		1
+#define WLC_PROTECTION_MMHDR_ONLY	2
+#define WLC_PROTECTION_CTS_ONLY		3
+
+/* values for g_protection_control and n_protection_control */
+#define WLC_PROTECTION_CTL_OFF		0
+#define WLC_PROTECTION_CTL_LOCAL	1
+#define WLC_PROTECTION_CTL_OVERLAP	2
+
+/* values for n_protection */
+#define WLC_N_PROTECTION_OFF		0
+#define WLC_N_PROTECTION_OPTIONAL	1
+#define WLC_N_PROTECTION_20IN40		2
+#define WLC_N_PROTECTION_MIXEDMODE	3
+
+/* values for band specific 40MHz capabilities */
+#define WLC_N_BW_20ALL			0
+#define WLC_N_BW_40ALL			1
+#define WLC_N_BW_20IN2G_40IN5G		2
+
+/* bitflags for SGI support (sgi_rx iovar) */
+#define WLC_N_SGI_20			0x01
+#define WLC_N_SGI_40			0x02
+
+/* defines used by the nrate iovar */
+#define NRATE_MCS_INUSE	0x00000080	/* MSC in use,indicates b0-6 holds an mcs */
+#define NRATE_RATE_MASK 0x0000007f	/* rate/mcs value */
+#define NRATE_STF_MASK	0x0000ff00	/* stf mode mask: siso, cdd, stbc, sdm */
+#define NRATE_STF_SHIFT	8	/* stf mode shift */
+#define NRATE_OVERRIDE	0x80000000	/* bit indicates override both rate & mode */
+#define NRATE_OVERRIDE_MCS_ONLY 0x40000000	/* bit indicate to override mcs only */
+#define NRATE_SGI_MASK  0x00800000	/* sgi mode */
+#define NRATE_SGI_SHIFT 23	/* sgi mode */
+#define NRATE_LDPC_CODING 0x00400000	/* bit indicates adv coding in use */
+#define NRATE_LDPC_SHIFT 22	/* ldpc shift */
+
+#define NRATE_STF_SISO	0	/* stf mode SISO */
+#define NRATE_STF_CDD	1	/* stf mode CDD */
+#define NRATE_STF_STBC	2	/* stf mode STBC */
+#define NRATE_STF_SDM	3	/* stf mode SDM */
+
+#define ANT_SELCFG_MAX		4	/* max number of antenna configurations */
+
+#define HIGHEST_SINGLE_STREAM_MCS	7	/* MCS values greater than this enable multiple streams */
+
+typedef struct {
+	u8 ant_config[ANT_SELCFG_MAX];	/* antenna configuration */
+	u8 num_antcfg;	/* number of available antenna configurations */
+} wlc_antselcfg_t;
+
 /* common functions for every port */
 extern void *wlc_attach(struct wl_info *wl, u16 vendor, u16 device, uint unit,
 			bool piomode, void *regsva, uint bustype, void *btparam,
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_rate.c b/drivers/staging/brcm80211/brcmsmac/wlc_rate.c
index 87b252d6a7f5..6c9574afccfd 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_rate.c
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_rate.c
@@ -20,7 +20,6 @@
 #include <bcmdefs.h>
 #include <bcmutils.h>
 #include <aiutils.h>
-#include <wlioctl.h>
 #include <sbhnddma.h>
 
 #include "wlc_types.h"
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_scb.h b/drivers/staging/brcm80211/brcmsmac/wlc_scb.h
index f07a891d5d27..fd7767c2289b 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_scb.h
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_scb.h
@@ -17,6 +17,8 @@
 #ifndef _wlc_scb_h_
 #define _wlc_scb_h_
 
+#include <linux/if_ether.h>	/* for ETH_ALEN */
+
 #define AMPDU_TX_BA_MAX_WSIZE	64	/* max Tx ba window size (in pdu) */
 /* structure to store per-tid state for the ampdu initiator */
 typedef struct scb_ampdu_tid_ini {
diff --git a/drivers/staging/brcm80211/brcmsmac/wlc_stf.c b/drivers/staging/brcm80211/brcmsmac/wlc_stf.c
index 544d883cfb62..ca1b8aa0d182 100644
--- a/drivers/staging/brcm80211/brcmsmac/wlc_stf.c
+++ b/drivers/staging/brcm80211/brcmsmac/wlc_stf.c
@@ -22,7 +22,6 @@
 #include <bcmdefs.h>
 #include <bcmutils.h>
 #include <aiutils.h>
-#include <wlioctl.h>
 #include <bcmwifi.h>
 #include <bcmnvram.h>
 #include <sbhnddma.h>
diff --git a/drivers/staging/brcm80211/include/bcmdefs.h b/drivers/staging/brcm80211/include/bcmdefs.h
index 55631f367436..65005471476a 100644
--- a/drivers/staging/brcm80211/include/bcmdefs.h
+++ b/drivers/staging/brcm80211/include/bcmdefs.h
@@ -147,4 +147,56 @@ typedef struct {
 struct wl_info;
 struct wlc_bsscfg;
 
+#define WL_NUMRATES		16	/* max # of rates in a rateset */
+typedef struct wl_rateset {
+	u32 count;		/* # rates in this set */
+	u8 rates[WL_NUMRATES];	/* rates in 500kbps units w/hi bit set if basic */
+} wl_rateset_t;
+
+#define WLC_CNTRY_BUF_SZ	4	/* Country string is 3 bytes + NUL */
+
+#define WLC_SET_CHANNEL				30
+#define WLC_SET_SRL				32
+#define WLC_SET_LRL				34
+
+#define WLC_SET_RATESET				72
+#define WLC_SET_BCNPRD				76
+#define WLC_GET_CURR_RATESET			114	/* current rateset */
+#define WLC_GET_PHYLIST				180
+
+/* Bit masks for radio disabled status - returned by WL_GET_RADIO */
+#define WL_RADIO_SW_DISABLE		(1<<0)
+#define WL_RADIO_HW_DISABLE		(1<<1)
+#define WL_RADIO_MPC_DISABLE		(1<<2)
+#define WL_RADIO_COUNTRY_DISABLE	(1<<3)	/* some countries don't support any channel */
+
+/* Override bit for WLC_SET_TXPWR.  if set, ignore other level limits */
+#define WL_TXPWR_OVERRIDE	(1U<<31)
+
+/* band types */
+#define	WLC_BAND_AUTO		0	/* auto-select */
+#define	WLC_BAND_5G		1	/* 5 Ghz */
+#define	WLC_BAND_2G		2	/* 2.4 Ghz */
+#define	WLC_BAND_ALL		3	/* all bands */
+
+/* Values for PM */
+#define PM_OFF	0
+#define PM_MAX	1
+
+/* Message levels */
+#define WL_ERROR_VAL		0x00000001
+#define WL_TRACE_VAL		0x00000002
+
+#define	NFIFO			6	/* # tx/rx fifopairs */
+
+#define PM_OFF	0
+#define PM_MAX	1
+#define PM_FAST 2
+
+/* band range returned by band_range iovar */
+#define WL_CHAN_FREQ_RANGE_2G      0
+#define WL_CHAN_FREQ_RANGE_5GL     1
+#define WL_CHAN_FREQ_RANGE_5GM     2
+#define WL_CHAN_FREQ_RANGE_5GH     3
+
 #endif				/* _bcmdefs_h_ */
diff --git a/drivers/staging/brcm80211/include/bcmwifi.h b/drivers/staging/brcm80211/include/bcmwifi.h
index a573ebff7680..f0dc6f8ac38e 100644
--- a/drivers/staging/brcm80211/include/bcmwifi.h
+++ b/drivers/staging/brcm80211/include/bcmwifi.h
@@ -17,6 +17,9 @@
 #ifndef	_bcmwifi_h_
 #define	_bcmwifi_h_
 
+#include <linux/if_ether.h>		/* for ETH_ALEN */
+#include <linux/ieee80211.h>		/* for WLAN_PMKID_LEN */
+
 /* A chanspec holds the channel number, band, bandwidth and control sideband */
 typedef u16 chanspec_t;
 
@@ -164,4 +167,59 @@ extern u8 bcm_chspec_ctlchan(chanspec_t chspec);
  */
 extern int bcm_mhz2channel(uint freq, uint start_factor);
 
+/* Enumerate crypto algorithms */
+#define	CRYPTO_ALGO_OFF			0
+#define	CRYPTO_ALGO_WEP1		1
+#define	CRYPTO_ALGO_TKIP		2
+#define	CRYPTO_ALGO_WEP128		3
+#define CRYPTO_ALGO_AES_CCM		4
+#define CRYPTO_ALGO_AES_RESERVED1	5
+#define CRYPTO_ALGO_AES_RESERVED2	6
+#define CRYPTO_ALGO_NALG		7
+
+/* wireless security bitvec */
+#define WEP_ENABLED		0x0001
+#define TKIP_ENABLED		0x0002
+#define AES_ENABLED		0x0004
+#define WSEC_SWFLAG		0x0008
+#define SES_OW_ENABLED		0x0040	/* to go into transition mode without setting wep */
+
+/* WPA authentication mode bitvec */
+#define WPA_AUTH_DISABLED	0x0000	/* Legacy (i.e., non-WPA) */
+#define WPA_AUTH_NONE		0x0001	/* none (IBSS) */
+#define WPA_AUTH_UNSPECIFIED	0x0002	/* over 802.1x */
+#define WPA_AUTH_PSK		0x0004	/* Pre-shared key */
+#define WPA_AUTH_RESERVED1	0x0008
+#define WPA_AUTH_RESERVED2	0x0010
+					/* #define WPA_AUTH_8021X 0x0020 *//* 802.1x, reserved */
+#define WPA2_AUTH_RESERVED1	0x0020
+#define WPA2_AUTH_UNSPECIFIED	0x0040	/* over 802.1x */
+#define WPA2_AUTH_PSK		0x0080	/* Pre-shared key */
+#define WPA2_AUTH_RESERVED3	0x0200
+#define WPA2_AUTH_RESERVED4	0x0400
+#define WPA2_AUTH_RESERVED5	0x0800
+
+/* pmkid */
+#define	MAXPMKID		16
+
+typedef struct _pmkid {
+	u8 BSSID[ETH_ALEN];
+	u8 PMKID[WLAN_PMKID_LEN];
+} pmkid_t;
+
+typedef struct _pmkid_list {
+	u32 npmkid;
+	pmkid_t pmkid[1];
+} pmkid_list_t;
+
+typedef struct _pmkid_cand {
+	u8 BSSID[ETH_ALEN];
+	u8 preauth;
+} pmkid_cand_t;
+
+typedef struct _pmkid_cand_list {
+	u32 npmkid_cand;
+	pmkid_cand_t pmkid_cand[1];
+} pmkid_cand_list_t;
+
 #endif				/* _bcmwifi_h_ */
diff --git a/drivers/staging/brcm80211/include/wlioctl.h b/drivers/staging/brcm80211/include/wlioctl.h
index 2876bd9eff85..281ca70bb542 100644
--- a/drivers/staging/brcm80211/include/wlioctl.h
+++ b/drivers/staging/brcm80211/include/wlioctl.h
@@ -17,1349 +17,4 @@
 #ifndef _wlioctl_h_
 #define	_wlioctl_h_
 
-#include <linux/ieee80211.h>
-#ifdef BRCM_FULLMAC
-#include <proto/bcmeth.h>
-#endif
-#include <proto/bcmevent.h>
-#include <proto/802.11.h>
-#include <bcmwifi.h>
-
-#ifndef INTF_NAME_SIZ
-#define INTF_NAME_SIZ	16
-#endif
-
-#ifdef BRCM_FULLMAC
-
-#define	WL_BSS_INFO_VERSION	108	/* current ver of wl_bss_info struct */
-
-/* BSS info structure
- * Applications MUST CHECK ie_offset field and length field to access IEs and
- * next bss_info structure in a vector (in wl_scan_results_t)
- */
-typedef struct wl_bss_info {
-	u32 version;		/* version field */
-	u32 length;		/* byte length of data in this record,
-				 * starting at version and including IEs
-				 */
-	u8 BSSID[ETH_ALEN];
-	u16 beacon_period;	/* units are Kusec */
-	u16 capability;	/* Capability information */
-	u8 SSID_len;
-	u8 SSID[32];
-	struct {
-		uint count;	/* # rates in this set */
-		u8 rates[16];	/* rates in 500kbps units w/hi bit set if basic */
-	} rateset;		/* supported rates */
-	chanspec_t chanspec;	/* chanspec for bss */
-	u16 atim_window;	/* units are Kusec */
-	u8 dtim_period;	/* DTIM period */
-	s16 RSSI;		/* receive signal strength (in dBm) */
-	s8 phy_noise;		/* noise (in dBm) */
-
-	u8 n_cap;		/* BSS is 802.11N Capable */
-	u32 nbss_cap;	/* 802.11N BSS Capabilities (based on HT_CAP_*) */
-	u8 ctl_ch;		/* 802.11N BSS control channel number */
-	u32 reserved32[1];	/* Reserved for expansion of BSS properties */
-	u8 flags;		/* flags */
-	u8 reserved[3];	/* Reserved for expansion of BSS properties */
-	u8 basic_mcs[MCSSET_LEN];	/* 802.11N BSS required MCS set */
-
-	u16 ie_offset;	/* offset at which IEs start, from beginning */
-	u32 ie_length;	/* byte length of Information Elements */
-	s16 SNR;		/* average SNR of during frame reception */
-	/* Add new fields here */
-	/* variable length Information Elements */
-} wl_bss_info_t;
-#endif /* BRCM_FULLMAC */
-
-typedef struct wlc_ssid {
-	u32 SSID_len;
-	unsigned char SSID[32];
-} wlc_ssid_t;
-
-#ifdef BRCM_FULLMAC
-typedef struct chan_scandata {
-	u8 txpower;
-	u8 pad;
-	chanspec_t channel;	/* Channel num, bw, ctrl_sb and band */
-	u32 channel_mintime;
-	u32 channel_maxtime;
-} chan_scandata_t;
-
-typedef enum wl_scan_type {
-	EXTDSCAN_FOREGROUND_SCAN,
-	EXTDSCAN_BACKGROUND_SCAN,
-	EXTDSCAN_FORCEDBACKGROUND_SCAN
-} wl_scan_type_t;
-
-#define WLC_EXTDSCAN_MAX_SSID		5
-
-#define WL_BSS_FLAGS_FROM_BEACON	0x01	/* bss_info derived from beacon */
-#define WL_BSS_FLAGS_FROM_CACHE		0x02	/* bss_info collected from cache */
-#define WL_BSS_FLAGS_RSSI_ONCHANNEL     0x04	/* rssi info was received on channel (vs offchannel) */
-
-typedef struct wl_extdscan_params {
-	s8 nprobes;		/* 0, passive, otherwise active */
-	s8 split_scan;	/* split scan */
-	s8 band;		/* band */
-	s8 pad;
-	wlc_ssid_t ssid[WLC_EXTDSCAN_MAX_SSID];	/* ssid list */
-	u32 tx_rate;		/* in 500ksec units */
-	wl_scan_type_t scan_type;	/* enum */
-	s32 channel_num;
-	chan_scandata_t channel_list[1];	/* list of chandata structs */
-} wl_extdscan_params_t;
-
-#define WL_EXTDSCAN_PARAMS_FIXED_SIZE 	(sizeof(wl_extdscan_params_t) - sizeof(chan_scandata_t))
-
-#define WL_BSSTYPE_INFRA 1
-#define WL_BSSTYPE_INDEP 0
-#define WL_BSSTYPE_ANY   2
-
-/* Bitmask for scan_type */
-#define WL_SCANFLAGS_PASSIVE 0x01	/* force passive scan */
-#define WL_SCANFLAGS_RESERVED 0x02	/* Reserved */
-#define WL_SCANFLAGS_PROHIBITED 0x04	/* allow scanning prohibited channels */
-
-typedef struct wl_scan_params {
-	wlc_ssid_t ssid;	/* default: {0, ""} */
-	u8 bssid[ETH_ALEN];	/* default: bcast */
-	s8 bss_type;		/* default: any,
-				 * DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT
-				 */
-	u8 scan_type;	/* flags, 0 use default */
-	s32 nprobes;		/* -1 use default, number of probes per channel */
-	s32 active_time;	/* -1 use default, dwell time per channel for
-				 * active scanning
-				 */
-	s32 passive_time;	/* -1 use default, dwell time per channel
-				 * for passive scanning
-				 */
-	s32 home_time;	/* -1 use default, dwell time for the home channel
-				 * between channel scans
-				 */
-	s32 channel_num;	/* count of channels and ssids that follow
-				 *
-				 * low half is count of channels in channel_list, 0
-				 * means default (use all available channels)
-				 *
-				 * high half is entries in wlc_ssid_t array that
-				 * follows channel_list, aligned for s32 (4 bytes)
-				 * meaning an odd channel count implies a 2-byte pad
-				 * between end of channel_list and first ssid
-				 *
-				 * if ssid count is zero, single ssid in the fixed
-				 * parameter portion is assumed, otherwise ssid in
-				 * the fixed portion is ignored
-				 */
-	u16 channel_list[1];	/* list of chanspecs */
-} wl_scan_params_t;
-
-/* size of wl_scan_params not including variable length array */
-#define WL_SCAN_PARAMS_FIXED_SIZE 64
-
-/* masks for channel and ssid count */
-#define WL_SCAN_PARAMS_COUNT_MASK 0x0000ffff
-#define WL_SCAN_PARAMS_NSSID_SHIFT 16
-
-#define WL_SCAN_ACTION_START      1
-#define WL_SCAN_ACTION_CONTINUE   2
-#define WL_SCAN_ACTION_ABORT      3
-
-#define ISCAN_REQ_VERSION 1
-
-/* incremental scan struct */
-typedef struct wl_iscan_params {
-	u32 version;
-	u16 action;
-	u16 scan_duration;
-	wl_scan_params_t params;
-} wl_iscan_params_t;
-
-/* 3 fields + size of wl_scan_params, not including variable length array */
-#define WL_ISCAN_PARAMS_FIXED_SIZE (offsetof(wl_iscan_params_t, params) + sizeof(wlc_ssid_t))
-
-typedef struct wl_scan_results {
-	u32 buflen;
-	u32 version;
-	u32 count;
-	wl_bss_info_t bss_info[1];
-} wl_scan_results_t;
-
-/* size of wl_scan_results not including variable length array */
-#define WL_SCAN_RESULTS_FIXED_SIZE (sizeof(wl_scan_results_t) - sizeof(wl_bss_info_t))
-
-/* wl_iscan_results status values */
-#define WL_SCAN_RESULTS_SUCCESS	0
-#define WL_SCAN_RESULTS_PARTIAL	1
-#define WL_SCAN_RESULTS_PENDING	2
-#define WL_SCAN_RESULTS_ABORTED	3
-#define WL_SCAN_RESULTS_NO_MEM	4
-
-#define ESCAN_REQ_VERSION 1
-
-typedef struct wl_escan_params {
-	u32 version;
-	u16 action;
-	u16 sync_id;
-	wl_scan_params_t params;
-} wl_escan_params_t;
-
-#define WL_ESCAN_PARAMS_FIXED_SIZE (offsetof(wl_escan_params_t, params) + sizeof(wlc_ssid_t))
-
-typedef struct wl_escan_result {
-	u32 buflen;
-	u32 version;
-	u16 sync_id;
-	u16 bss_count;
-	wl_bss_info_t bss_info[1];
-} wl_escan_result_t;
-
-#define WL_ESCAN_RESULTS_FIXED_SIZE (sizeof(wl_escan_result_t) - sizeof(wl_bss_info_t))
-
-/* incremental scan results struct */
-typedef struct wl_iscan_results {
-	u32 status;
-	wl_scan_results_t results;
-} wl_iscan_results_t;
-
-/* size of wl_iscan_results not including variable length array */
-#define WL_ISCAN_RESULTS_FIXED_SIZE \
-	(WL_SCAN_RESULTS_FIXED_SIZE + offsetof(wl_iscan_results_t, results))
-
-typedef struct wl_probe_params {
-	wlc_ssid_t ssid;
-	u8 bssid[ETH_ALEN];
-	u8 mac[ETH_ALEN];
-} wl_probe_params_t;
-#endif /* BRCM_FULLMAC */
-
-#define WL_NUMRATES		16	/* max # of rates in a rateset */
-typedef struct wl_rateset {
-	u32 count;		/* # rates in this set */
-	u8 rates[WL_NUMRATES];	/* rates in 500kbps units w/hi bit set if basic */
-} wl_rateset_t;
-
-#ifdef BRCM_FULLMAC
-typedef struct wl_rateset_args {
-	u32 count;		/* # rates in this set */
-	u8 rates[WL_NUMRATES];	/* rates in 500kbps units w/hi bit set if basic */
-	u8 mcs[MCSSET_LEN];	/* supported mcs index bit map */
-} wl_rateset_args_t;
-
-/* u32 list */
-typedef struct wl_u32_list {
-	/* in - # of elements, out - # of entries */
-	u32 count;
-	/* variable length u32 list */
-	u32 element[1];
-} wl_u32_list_t;
-
-/* used for association with a specific BSSID and chanspec list */
-typedef struct wl_assoc_params {
-	u8 bssid[ETH_ALEN];	/* 00:00:00:00:00:00: broadcast scan */
-	u16 bssid_cnt;
-	s32 chanspec_num;	/* 0: all available channels,
-				 * otherwise count of chanspecs in chanspec_list
-				 */
-	chanspec_t chanspec_list[1];	/* list of chanspecs */
-} wl_assoc_params_t;
-#define WL_ASSOC_PARAMS_FIXED_SIZE 	(sizeof(wl_assoc_params_t) - sizeof(chanspec_t))
-
-/* used for reassociation/roam to a specific BSSID and channel */
-typedef wl_assoc_params_t wl_reassoc_params_t;
-#define WL_REASSOC_PARAMS_FIXED_SIZE	WL_ASSOC_PARAMS_FIXED_SIZE
-
-/* used for join with or without a specific bssid and channel list */
-typedef struct wl_join_params {
-	wlc_ssid_t ssid;
-	wl_assoc_params_t params;	/* optional field, but it must include the fixed portion
-					 * of the wl_assoc_params_t struct when it does present.
-					 */
-} wl_join_params_t;
-#define WL_JOIN_PARAMS_FIXED_SIZE 	(sizeof(wl_join_params_t) - sizeof(chanspec_t))
-
-#endif /* BRCM_FULLMAC */
-
-/* defines used by the nrate iovar */
-#define NRATE_MCS_INUSE	0x00000080	/* MSC in use,indicates b0-6 holds an mcs */
-#define NRATE_RATE_MASK 0x0000007f	/* rate/mcs value */
-#define NRATE_STF_MASK	0x0000ff00	/* stf mode mask: siso, cdd, stbc, sdm */
-#define NRATE_STF_SHIFT	8	/* stf mode shift */
-#define NRATE_OVERRIDE	0x80000000	/* bit indicates override both rate & mode */
-#define NRATE_OVERRIDE_MCS_ONLY 0x40000000	/* bit indicate to override mcs only */
-#define NRATE_SGI_MASK  0x00800000	/* sgi mode */
-#define NRATE_SGI_SHIFT 23	/* sgi mode */
-#define NRATE_LDPC_CODING 0x00400000	/* bit indicates adv coding in use */
-#define NRATE_LDPC_SHIFT 22	/* ldpc shift */
-
-#define NRATE_STF_SISO	0	/* stf mode SISO */
-#define NRATE_STF_CDD	1	/* stf mode CDD */
-#define NRATE_STF_STBC	2	/* stf mode STBC */
-#define NRATE_STF_SDM	3	/* stf mode SDM */
-
-#define ANTENNA_NUM_1	1	/* total number of antennas to be used */
-#define ANTENNA_NUM_2	2
-#define ANTENNA_NUM_3	3
-#define ANTENNA_NUM_4	4
-
-#define ANT_SELCFG_AUTO		0x80	/* bit indicates antenna sel AUTO */
-#define ANT_SELCFG_MASK		0x33	/* antenna configuration mask */
-#define ANT_SELCFG_MAX		4	/* max number of antenna configurations */
-#define ANT_SELCFG_TX_UNICAST	0	/* unicast tx antenna configuration */
-#define ANT_SELCFG_RX_UNICAST	1	/* unicast rx antenna configuration */
-#define ANT_SELCFG_TX_DEF	2	/* default tx antenna configuration */
-#define ANT_SELCFG_RX_DEF	3	/* default rx antenna configuration */
-
-#define MAX_STREAMS_SUPPORTED	4	/* max number of streams supported */
-
-typedef struct {
-	u8 ant_config[ANT_SELCFG_MAX];	/* antenna configuration */
-	u8 num_antcfg;	/* number of available antenna configurations */
-} wlc_antselcfg_t;
-
-#define HIGHEST_SINGLE_STREAM_MCS	7	/* MCS values greater than this enable multiple streams */
-
-#ifdef BRCM_FULLMAC
-#define MAX_CCA_CHANNELS 38	/* Max number of 20 Mhz wide channels */
-#define MAX_CCA_SECS     60	/* CCA keeps this many seconds history */
-
-#define IBSS_MED        15	/* Mediom in-bss congestion percentage */
-#define IBSS_HI         25	/* Hi in-bss congestion percentage */
-#define OBSS_MED        12
-#define OBSS_HI         25
-#define INTERFER_MED    5
-#define INTERFER_HI     10
-
-#define  CCA_FLAG_2G_ONLY		0x01	/* Return a channel from 2.4 Ghz band */
-#define  CCA_FLAG_5G_ONLY		0x02	/* Return a channel from 2.4 Ghz band */
-#define  CCA_FLAG_IGNORE_DURATION	0x04	/* Ignore dwell time for each channel */
-#define  CCA_FLAGS_PREFER_1_6_11	0x10
-#define  CCA_FLAG_IGNORE_INTERFER 	0x20	/* do not exlude channel based on interfer level */
-
-#define CCA_ERRNO_BAND 		1	/* After filtering for band pref, no choices left */
-#define CCA_ERRNO_DURATION	2	/* After filtering for duration, no choices left */
-#define CCA_ERRNO_PREF_CHAN	3	/* After filtering for chan pref, no choices left */
-#define CCA_ERRNO_INTERFER	4	/* After filtering for interference, no choices left */
-#define CCA_ERRNO_TOO_FEW	5	/* Only 1 channel was input */
-
-typedef struct {
-	u32 duration;	/* millisecs spent sampling this channel */
-	u32 congest_ibss;	/* millisecs in our bss (presumably this traffic will */
-	/*  move if cur bss moves channels) */
-	u32 congest_obss;	/* traffic not in our bss */
-	u32 interference;	/* millisecs detecting a non 802.11 interferer. */
-	u32 timestamp;	/* second timestamp */
-} cca_congest_t;
-
-typedef struct {
-	chanspec_t chanspec;	/* Which channel? */
-	u8 num_secs;		/* How many secs worth of data */
-	cca_congest_t secs[1];	/* Data */
-} cca_congest_channel_req_t;
-
-#endif /* BRCM_FULLMAC */
-
-#define WLC_CNTRY_BUF_SZ	4	/* Country string is 3 bytes + NUL */
-
-#ifdef BRCM_FULLMAC
-typedef struct wl_country {
-	char country_abbrev[WLC_CNTRY_BUF_SZ];	/* nul-terminated country code used in
-						 * the Country IE
-						 */
-	s32 rev;		/* revision specifier for ccode
-				 * on set, -1 indicates unspecified.
-				 * on get, rev >= 0
-				 */
-	char ccode[WLC_CNTRY_BUF_SZ];	/* nul-terminated built-in country code.
-					 * variable length, but fixed size in
-					 * struct allows simple allocation for
-					 * expected country strings <= 3 chars.
-					 */
-} wl_country_t;
-
-typedef struct wl_channels_in_country {
-	u32 buflen;
-	u32 band;
-	char country_abbrev[WLC_CNTRY_BUF_SZ];
-	u32 count;
-	u32 channel[1];
-} wl_channels_in_country_t;
-
-typedef struct wl_country_list {
-	u32 buflen;
-	u32 band_set;
-	u32 band;
-	u32 count;
-	char country_abbrev[1];
-} wl_country_list_t;
-
-#define WL_NUM_RPI_BINS		8
-#define WL_RM_TYPE_BASIC	1
-#define WL_RM_TYPE_CCA		2
-#define WL_RM_TYPE_RPI		3
-
-#define WL_RM_FLAG_PARALLEL	(1<<0)
-
-#define WL_RM_FLAG_LATE		(1<<1)
-#define WL_RM_FLAG_INCAPABLE	(1<<2)
-#define WL_RM_FLAG_REFUSED	(1<<3)
-
-typedef struct wl_rm_req_elt {
-	s8 type;
-	s8 flags;
-	chanspec_t chanspec;
-	u32 token;		/* token for this measurement */
-	u32 tsf_h;		/* TSF high 32-bits of Measurement start time */
-	u32 tsf_l;		/* TSF low 32-bits */
-	u32 dur;		/* TUs */
-} wl_rm_req_elt_t;
-
-typedef struct wl_rm_req {
-	u32 token;		/* overall measurement set token */
-	u32 count;		/* number of measurement requests */
-	void *cb;		/* completion callback function: may be NULL */
-	void *cb_arg;		/* arg to completion callback function */
-	wl_rm_req_elt_t req[1];	/* variable length block of requests */
-} wl_rm_req_t;
-#define WL_RM_REQ_FIXED_LEN	offsetof(wl_rm_req_t, req)
-
-typedef struct wl_rm_rep_elt {
-	s8 type;
-	s8 flags;
-	chanspec_t chanspec;
-	u32 token;		/* token for this measurement */
-	u32 tsf_h;		/* TSF high 32-bits of Measurement start time */
-	u32 tsf_l;		/* TSF low 32-bits */
-	u32 dur;		/* TUs */
-	u32 len;		/* byte length of data block */
-	u8 data[1];		/* variable length data block */
-} wl_rm_rep_elt_t;
-#define WL_RM_REP_ELT_FIXED_LEN	24	/* length excluding data block */
-
-#define WL_RPI_REP_BIN_NUM 8
-typedef struct wl_rm_rpi_rep {
-	u8 rpi[WL_RPI_REP_BIN_NUM];
-	s8 rpi_max[WL_RPI_REP_BIN_NUM];
-} wl_rm_rpi_rep_t;
-
-typedef struct wl_rm_rep {
-	u32 token;		/* overall measurement set token */
-	u32 len;		/* length of measurement report block */
-	wl_rm_rep_elt_t rep[1];	/* variable length block of reports */
-} wl_rm_rep_t;
-#define WL_RM_REP_FIXED_LEN	8
-#endif /* BRCM_FULLMAC */
-
-/* Enumerate crypto algorithms */
-#define	CRYPTO_ALGO_OFF			0
-#define	CRYPTO_ALGO_WEP1		1
-#define	CRYPTO_ALGO_TKIP		2
-#define	CRYPTO_ALGO_WEP128		3
-#define CRYPTO_ALGO_AES_CCM		4
-#define CRYPTO_ALGO_AES_RESERVED1	5
-#define CRYPTO_ALGO_AES_RESERVED2	6
-#define CRYPTO_ALGO_NALG		7
-
-#define WSEC_GEN_MIC_ERROR	0x0001
-#define WSEC_GEN_REPLAY		0x0002
-#define WSEC_GEN_ICV_ERROR	0x0004
-
-#define WL_SOFT_KEY	(1 << 0)	/* Indicates this key is using soft encrypt */
-#define WL_PRIMARY_KEY	(1 << 1)	/* Indicates this key is the primary (ie tx) key */
-#define WL_KF_RES_4	(1 << 4)	/* Reserved for backward compat */
-#define WL_KF_RES_5	(1 << 5)	/* Reserved for backward compat */
-#define WL_IBSS_PEER_GROUP_KEY	(1 << 6)	/* Indicates a group key for a IBSS PEER */
-
-typedef struct wl_wsec_key {
-	u32 index;		/* key index */
-	u32 len;		/* key length */
-	u8 data[WLAN_MAX_KEY_LEN];	/* key data */
-	u32 pad_1[18];
-	u32 algo;		/* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
-	u32 flags;		/* misc flags */
-	u32 pad_2[2];
-	int pad_3;
-	int iv_initialized;	/* has IV been initialized already? */
-	int pad_4;
-	/* Rx IV */
-	struct {
-		u32 hi;	/* upper 32 bits of IV */
-		u16 lo;	/* lower 16 bits of IV */
-	} rxiv;
-	u32 pad_5[2];
-	u8 ea[ETH_ALEN];	/* per station */
-} wl_wsec_key_t;
-
-#define WSEC_MIN_PSK_LEN	8
-#define WSEC_MAX_PSK_LEN	64
-
-/* Flag for key material needing passhash'ing */
-#define WSEC_PASSPHRASE		(1<<0)
-
-/* receptacle for WLC_SET_WSEC_PMK parameter */
-typedef struct {
-	unsigned short key_len;		/* octets in key material */
-	unsigned short flags;		/* key handling qualification */
-	u8 key[WSEC_MAX_PSK_LEN];	/* PMK material */
-} wsec_pmk_t;
-
-/* wireless security bitvec */
-#define WEP_ENABLED		0x0001
-#define TKIP_ENABLED		0x0002
-#define AES_ENABLED		0x0004
-#define WSEC_SWFLAG		0x0008
-#define SES_OW_ENABLED		0x0040	/* to go into transition mode without setting wep */
-
-/* WPA authentication mode bitvec */
-#define WPA_AUTH_DISABLED	0x0000	/* Legacy (i.e., non-WPA) */
-#define WPA_AUTH_NONE		0x0001	/* none (IBSS) */
-#define WPA_AUTH_UNSPECIFIED	0x0002	/* over 802.1x */
-#define WPA_AUTH_PSK		0x0004	/* Pre-shared key */
-#define WPA_AUTH_RESERVED1	0x0008
-#define WPA_AUTH_RESERVED2	0x0010
-					/* #define WPA_AUTH_8021X 0x0020 *//* 802.1x, reserved */
-#define WPA2_AUTH_RESERVED1	0x0020
-#define WPA2_AUTH_UNSPECIFIED	0x0040	/* over 802.1x */
-#define WPA2_AUTH_PSK		0x0080	/* Pre-shared key */
-#define WPA2_AUTH_RESERVED3	0x0200
-#define WPA2_AUTH_RESERVED4	0x0400
-#define WPA2_AUTH_RESERVED5	0x0800
-
-/* pmkid */
-#define	MAXPMKID		16
-
-typedef struct _pmkid {
-	u8 BSSID[ETH_ALEN];
-	u8 PMKID[WLAN_PMKID_LEN];
-} pmkid_t;
-
-typedef struct _pmkid_list {
-	u32 npmkid;
-	pmkid_t pmkid[1];
-} pmkid_list_t;
-
-typedef struct _pmkid_cand {
-	u8 BSSID[ETH_ALEN];
-	u8 preauth;
-} pmkid_cand_t;
-
-typedef struct _pmkid_cand_list {
-	u32 npmkid_cand;
-	pmkid_cand_t pmkid_cand[1];
-} pmkid_cand_list_t;
-
-typedef struct wl_led_info {
-	u32 index;		/* led index */
-	u32 behavior;
-	u8 activehi;
-} wl_led_info_t;
-
-/* R_REG and W_REG struct passed through ioctl */
-typedef struct {
-	u32 byteoff;		/* byte offset of the field in d11regs_t */
-	u32 val;		/* read/write value of the field */
-	u32 size;		/* sizeof the field */
-	uint band;		/* band (optional) */
-} rw_reg_t;
-
-
-#ifdef BRCM_FULLMAC
-/* Used to get specific STA parameters */
-typedef struct {
-	u32 val;
-	u8 ea[ETH_ALEN];
-} scb_val_t;
-#endif /* BRCM_FULLMAC */
-
-/* channel encoding */
-typedef struct channel_info {
-	int hw_channel;
-	int target_channel;
-	int scan_channel;
-} channel_info_t;
-
-/* For ioctls that take a list of MAC addresses */
-struct maclist {
-	uint count;		/* number of MAC addresses */
-	u8 ea[1][ETH_ALEN];	/* variable length array of MAC addresses */
-};
-
-#ifdef BRCM_FULLMAC
-/* Linux network driver ioctl encoding */
-typedef struct wl_ioctl {
-	uint cmd;		/* common ioctl definition */
-	void *buf;		/* pointer to user buffer */
-	uint len;		/* length of user buffer */
-	u8 set;		/* get or set request (optional) */
-	uint used;		/* bytes read or written (optional) */
-	uint needed;		/* bytes needed (optional) */
-} wl_ioctl_t;
-#endif /* BRCM_FULLMAC */
-
-
-/*
- * Structure for passing hardware and software
- * revision info up from the driver.
- */
-typedef struct wlc_rev_info {
-	uint vendorid;		/* PCI vendor id */
-	uint deviceid;		/* device id of chip */
-	uint radiorev;		/* radio revision */
-	uint chiprev;		/* chip revision */
-	uint corerev;		/* core revision */
-	uint boardid;		/* board identifier (usu. PCI sub-device id) */
-	uint boardvendor;	/* board vendor (usu. PCI sub-vendor id) */
-	uint boardrev;		/* board revision */
-	uint driverrev;		/* driver version */
-	uint ucoderev;		/* microcode version */
-	uint bus;		/* bus type */
-	uint chipnum;		/* chip number */
-	uint phytype;		/* phy type */
-	uint phyrev;		/* phy revision */
-	uint anarev;		/* anacore rev */
-	uint chippkg;		/* chip package info */
-} wlc_rev_info_t;
-
-#define WL_REV_INFO_LEGACY_LENGTH	48
-
-#ifdef BRCM_FULLMAC
-#define	WLC_IOCTL_SMLEN			256	/* "small" length ioctl buffer required */
-#define WLC_IOCTL_MEDLEN		1536	/* "med" length ioctl buffer required */
-#define	WLC_IOCTL_MAXLEN	8192
-#endif
-
-/* common ioctl definitions */
-#define WLC_GET_MAGIC				0
-#define WLC_GET_VERSION				1
-#define WLC_UP					2
-#define WLC_DOWN				3
-#define WLC_GET_LOOP				4
-#define WLC_SET_LOOP				5
-#define WLC_DUMP				6
-#define WLC_GET_MSGLEVEL			7
-#define WLC_SET_MSGLEVEL			8
-#define WLC_GET_PROMISC				9
-#define WLC_SET_PROMISC				10
-#define WLC_OVERLAY_IOCTL			11
-#define WLC_GET_RATE				12
-						      /* #define WLC_SET_RATE				13 *//* no longer supported */
-#define WLC_GET_INSTANCE			14
-						      /* #define WLC_GET_FRAG				15 *//* no longer supported */
-						      /* #define WLC_SET_FRAG				16 *//* no longer supported */
-						      /* #define WLC_GET_RTS				17 *//* no longer supported */
-						      /* #define WLC_SET_RTS				18 *//* no longer supported */
-#define WLC_GET_INFRA				19
-#define WLC_SET_INFRA				20
-#define WLC_GET_AUTH				21
-#define WLC_SET_AUTH				22
-#define WLC_GET_BSSID				23
-#define WLC_SET_BSSID				24
-#define WLC_GET_SSID				25
-#define WLC_SET_SSID				26
-#define WLC_RESTART				27
-						      /* #define WLC_DUMP_SCB				28 *//* no longer supported */
-#define WLC_GET_CHANNEL				29
-#define WLC_SET_CHANNEL				30
-#define WLC_GET_SRL				31
-#define WLC_SET_SRL				32
-#define WLC_GET_LRL				33
-#define WLC_SET_LRL				34
-#define WLC_GET_PLCPHDR				35
-#define WLC_SET_PLCPHDR				36
-#define WLC_GET_RADIO				37
-#define WLC_SET_RADIO				38
-#define WLC_GET_PHYTYPE				39
-#define WLC_DUMP_RATE				40
-#define WLC_SET_RATE_PARAMS			41
-#define WLC_GET_FIXRATE				42
-#define WLC_SET_FIXRATE				43
-						      /* #define WLC_GET_WEP				42 *//* no longer supported */
-						      /* #define WLC_SET_WEP				43 *//* no longer supported */
-#define WLC_GET_KEY				44
-#define WLC_SET_KEY				45
-#define WLC_GET_REGULATORY			46
-#define WLC_SET_REGULATORY			47
-#define WLC_GET_PASSIVE_SCAN			48
-#define WLC_SET_PASSIVE_SCAN			49
-#define WLC_SCAN				50
-#define WLC_SCAN_RESULTS			51
-#define WLC_DISASSOC				52
-#define WLC_REASSOC				53
-#define WLC_GET_ROAM_TRIGGER			54
-#define WLC_SET_ROAM_TRIGGER			55
-#define WLC_GET_ROAM_DELTA			56
-#define WLC_SET_ROAM_DELTA			57
-#define WLC_GET_ROAM_SCAN_PERIOD		58
-#define WLC_SET_ROAM_SCAN_PERIOD		59
-#define WLC_EVM					60	/* diag */
-#define WLC_GET_TXANT				61
-#define WLC_SET_TXANT				62
-#define WLC_GET_ANTDIV				63
-#define WLC_SET_ANTDIV				64
-						      /* #define WLC_GET_TXPWR			65 *//* no longer supported */
-						      /* #define WLC_SET_TXPWR			66 *//* no longer supported */
-#define WLC_GET_CLOSED				67
-#define WLC_SET_CLOSED				68
-#define WLC_GET_MACLIST				69
-#define WLC_SET_MACLIST				70
-#define WLC_GET_RATESET				71
-#define WLC_SET_RATESET				72
-						      /* #define WLC_GET_LOCALE			73 *//* no longer supported */
-#define WLC_LONGTRAIN				74
-#define WLC_GET_BCNPRD				75
-#define WLC_SET_BCNPRD				76
-#define WLC_GET_DTIMPRD				77
-#define WLC_SET_DTIMPRD				78
-#define WLC_GET_SROM				79
-#define WLC_SET_SROM				80
-#define WLC_GET_WEP_RESTRICT			81
-#define WLC_SET_WEP_RESTRICT			82
-#define WLC_GET_COUNTRY				83
-#define WLC_SET_COUNTRY				84
-#define WLC_GET_PM				85
-#define WLC_SET_PM				86
-#define WLC_GET_WAKE				87
-#define WLC_SET_WAKE				88
-						      /* #define WLC_GET_D11CNTS			89 *//* -> "counters" iovar */
-#define WLC_GET_FORCELINK			90	/* ndis only */
-#define WLC_SET_FORCELINK			91	/* ndis only */
-#define WLC_FREQ_ACCURACY			92	/* diag */
-#define WLC_CARRIER_SUPPRESS			93	/* diag */
-#define WLC_GET_PHYREG				94
-#define WLC_SET_PHYREG				95
-#define WLC_GET_RADIOREG			96
-#define WLC_SET_RADIOREG			97
-#define WLC_GET_REVINFO				98
-#define WLC_GET_UCANTDIV			99
-#define WLC_SET_UCANTDIV			100
-#define WLC_R_REG				101
-#define WLC_W_REG				102
-/* #define WLC_DIAG_LOOPBACK			103	old tray diag */
-						       /* #define WLC_RESET_D11CNTS			104 *//* -> "reset_d11cnts" iovar */
-#define WLC_GET_MACMODE				105
-#define WLC_SET_MACMODE				106
-#define WLC_GET_MONITOR				107
-#define WLC_SET_MONITOR				108
-#define WLC_GET_GMODE				109
-#define WLC_SET_GMODE				110
-#define WLC_GET_LEGACY_ERP			111
-#define WLC_SET_LEGACY_ERP			112
-#define WLC_GET_RX_ANT				113
-#define WLC_GET_CURR_RATESET			114	/* current rateset */
-#define WLC_GET_SCANSUPPRESS			115
-#define WLC_SET_SCANSUPPRESS			116
-#define WLC_GET_AP				117
-#define WLC_SET_AP				118
-#define WLC_GET_EAP_RESTRICT			119
-#define WLC_SET_EAP_RESTRICT			120
-#define WLC_SCB_AUTHORIZE			121
-#define WLC_SCB_DEAUTHORIZE			122
-#define WLC_GET_WDSLIST				123
-#define WLC_SET_WDSLIST				124
-#define WLC_GET_ATIM				125
-#define WLC_SET_ATIM				126
-#define WLC_GET_RSSI				127
-#define WLC_GET_PHYANTDIV			128
-#define WLC_SET_PHYANTDIV			129
-#define WLC_AP_RX_ONLY				130
-#define WLC_GET_TX_PATH_PWR			131
-#define WLC_SET_TX_PATH_PWR			132
-#define WLC_GET_WSEC				133
-#define WLC_SET_WSEC				134
-#define WLC_GET_PHY_NOISE			135
-#define WLC_GET_BSS_INFO			136
-#define WLC_GET_PKTCNTS				137
-#define WLC_GET_LAZYWDS				138
-#define WLC_SET_LAZYWDS				139
-#define WLC_GET_BANDLIST			140
-#define WLC_GET_BAND				141
-#define WLC_SET_BAND				142
-#define WLC_SCB_DEAUTHENTICATE			143
-#define WLC_GET_SHORTSLOT			144
-#define WLC_GET_SHORTSLOT_OVERRIDE		145
-#define WLC_SET_SHORTSLOT_OVERRIDE		146
-#define WLC_GET_SHORTSLOT_RESTRICT		147
-#define WLC_SET_SHORTSLOT_RESTRICT		148
-#define WLC_GET_GMODE_PROTECTION		149
-#define WLC_GET_GMODE_PROTECTION_OVERRIDE	150
-#define WLC_SET_GMODE_PROTECTION_OVERRIDE	151
-#define WLC_UPGRADE				152
-						       /* #define WLC_GET_MRATE			153 *//* no longer supported */
-						       /* #define WLC_SET_MRATE			154 *//* no longer supported */
-#define WLC_GET_IGNORE_BCNS			155
-#define WLC_SET_IGNORE_BCNS			156
-#define WLC_GET_SCB_TIMEOUT			157
-#define WLC_SET_SCB_TIMEOUT			158
-#define WLC_GET_ASSOCLIST			159
-#define WLC_GET_CLK				160
-#define WLC_SET_CLK				161
-#define WLC_GET_UP				162
-#define WLC_OUT					163
-#define WLC_GET_WPA_AUTH			164
-#define WLC_SET_WPA_AUTH			165
-#define WLC_GET_UCFLAGS				166
-#define WLC_SET_UCFLAGS				167
-#define WLC_GET_PWRIDX				168
-#define WLC_SET_PWRIDX				169
-#define WLC_GET_TSSI				170
-#define WLC_GET_SUP_RATESET_OVERRIDE		171
-#define WLC_SET_SUP_RATESET_OVERRIDE		172
-						       /* #define WLC_SET_FAST_TIMER			173 *//* no longer supported */
-						       /* #define WLC_GET_FAST_TIMER			174 *//* no longer supported */
-						       /* #define WLC_SET_SLOW_TIMER			175 *//* no longer supported */
-						       /* #define WLC_GET_SLOW_TIMER			176 *//* no longer supported */
-						       /* #define WLC_DUMP_PHYREGS			177 *//* no longer supported */
-#define WLC_GET_PROTECTION_CONTROL		178
-#define WLC_SET_PROTECTION_CONTROL		179
-#define WLC_GET_PHYLIST				180
-#define WLC_ENCRYPT_STRENGTH			181	/* ndis only */
-#define WLC_DECRYPT_STATUS			182	/* ndis only */
-#define WLC_GET_KEY_SEQ				183
-#define WLC_GET_SCAN_CHANNEL_TIME		184
-#define WLC_SET_SCAN_CHANNEL_TIME		185
-#define WLC_GET_SCAN_UNASSOC_TIME		186
-#define WLC_SET_SCAN_UNASSOC_TIME		187
-#define WLC_GET_SCAN_HOME_TIME			188
-#define WLC_SET_SCAN_HOME_TIME			189
-#define WLC_GET_SCAN_NPROBES			190
-#define WLC_SET_SCAN_NPROBES			191
-#define WLC_GET_PRB_RESP_TIMEOUT		192
-#define WLC_SET_PRB_RESP_TIMEOUT		193
-#define WLC_GET_ATTEN				194
-#define WLC_SET_ATTEN				195
-#define WLC_GET_SHMEM				196	/* diag */
-#define WLC_SET_SHMEM				197	/* diag */
-						       /* #define WLC_GET_GMODE_PROTECTION_CTS		198 *//* no longer supported */
-						       /* #define WLC_SET_GMODE_PROTECTION_CTS		199 *//* no longer supported */
-#define WLC_SET_WSEC_TEST			200
-#define WLC_SCB_DEAUTHENTICATE_FOR_REASON	201
-#define WLC_TKIP_COUNTERMEASURES		202
-#define WLC_GET_PIOMODE				203
-#define WLC_SET_PIOMODE				204
-#define WLC_SET_ASSOC_PREFER			205
-#define WLC_GET_ASSOC_PREFER			206
-#define WLC_SET_ROAM_PREFER			207
-#define WLC_GET_ROAM_PREFER			208
-#define WLC_SET_LED				209
-#define WLC_GET_LED				210
-#define WLC_RESERVED6				211
-#define WLC_RESERVED7				212
-#define WLC_GET_CHANNEL_QA			213
-#define WLC_START_CHANNEL_QA			214
-#define WLC_GET_CHANNEL_SEL			215
-#define WLC_START_CHANNEL_SEL			216
-#define WLC_GET_VALID_CHANNELS			217
-#define WLC_GET_FAKEFRAG			218
-#define WLC_SET_FAKEFRAG			219
-#define WLC_GET_PWROUT_PERCENTAGE		220
-#define WLC_SET_PWROUT_PERCENTAGE		221
-#define WLC_SET_BAD_FRAME_PREEMPT		222
-#define WLC_GET_BAD_FRAME_PREEMPT		223
-#define WLC_SET_LEAP_LIST			224
-#define WLC_GET_LEAP_LIST			225
-#define WLC_GET_CWMIN				226
-#define WLC_SET_CWMIN				227
-#define WLC_GET_CWMAX				228
-#define WLC_SET_CWMAX				229
-#define WLC_GET_WET				230
-#define WLC_SET_WET				231
-#define WLC_GET_PUB				232
-						       /* #define WLC_SET_GLACIAL_TIMER		233 *//* no longer supported */
-						       /* #define WLC_GET_GLACIAL_TIMER		234 *//* no longer supported */
-#define WLC_GET_KEY_PRIMARY			235
-#define WLC_SET_KEY_PRIMARY			236
-						       /* #define WLC_DUMP_RADIOREGS			237 *//* no longer supported */
-#define WLC_RESERVED4				238
-#define WLC_RESERVED5				239
-#define WLC_UNSET_CALLBACK			240
-#define WLC_SET_CALLBACK			241
-#define WLC_GET_RADAR				242
-#define WLC_SET_RADAR				243
-#define WLC_SET_SPECT_MANAGMENT			244
-#define WLC_GET_SPECT_MANAGMENT			245
-#define WLC_WDS_GET_REMOTE_HWADDR		246	/* handled in wl_linux.c/wl_vx.c */
-#define WLC_WDS_GET_WPA_SUP			247
-#define WLC_SET_CS_SCAN_TIMER			248
-#define WLC_GET_CS_SCAN_TIMER			249
-#define WLC_MEASURE_REQUEST			250
-#define WLC_INIT				251
-#define WLC_SEND_QUIET				252
-#define WLC_KEEPALIVE			253
-#define WLC_SEND_PWR_CONSTRAINT			254
-#define WLC_UPGRADE_STATUS			255
-#define WLC_CURRENT_PWR				256
-#define WLC_GET_SCAN_PASSIVE_TIME		257
-#define WLC_SET_SCAN_PASSIVE_TIME		258
-#define WLC_LEGACY_LINK_BEHAVIOR		259
-#define WLC_GET_CHANNELS_IN_COUNTRY		260
-#define WLC_GET_COUNTRY_LIST			261
-#define WLC_GET_VAR				262	/* get value of named variable */
-#define WLC_SET_VAR				263	/* set named variable to value */
-#define WLC_NVRAM_GET				264	/* deprecated */
-#define WLC_NVRAM_SET				265
-#define WLC_NVRAM_DUMP				266
-#define WLC_REBOOT				267
-#define WLC_SET_WSEC_PMK			268
-#define WLC_GET_AUTH_MODE			269
-#define WLC_SET_AUTH_MODE			270
-#define WLC_GET_WAKEENTRY			271
-#define WLC_SET_WAKEENTRY			272
-#define WLC_NDCONFIG_ITEM			273	/* currently handled in wl_oid.c */
-#define WLC_NVOTPW				274
-#define WLC_OTPW				275
-#define WLC_IOV_BLOCK_GET			276
-#define WLC_IOV_MODULES_GET			277
-#define WLC_SOFT_RESET				278
-#define WLC_GET_ALLOW_MODE			279
-#define WLC_SET_ALLOW_MODE			280
-#define WLC_GET_DESIRED_BSSID			281
-#define WLC_SET_DESIRED_BSSID			282
-#define	WLC_DISASSOC_MYAP			283
-#define WLC_GET_RESERVED10			284
-#define WLC_GET_RESERVED11			285
-#define WLC_GET_RESERVED12			286
-#define WLC_GET_RESERVED13			287
-#define WLC_GET_RESERVED14			288
-#define WLC_SET_RESERVED15			289
-#define WLC_SET_RESERVED16			290
-#define WLC_GET_RESERVED17			291
-#define WLC_GET_RESERVED18			292
-#define WLC_GET_RESERVED19			293
-#define WLC_SET_RESERVED1A			294
-#define WLC_GET_RESERVED1B			295
-#define WLC_GET_RESERVED1C			296
-#define WLC_GET_RESERVED1D			297
-#define WLC_SET_RESERVED1E			298
-#define WLC_GET_RESERVED1F			299
-#define WLC_GET_RESERVED20			300
-#define WLC_GET_RESERVED21			301
-#define WLC_GET_RESERVED22			302
-#define WLC_GET_RESERVED23			303
-#define WLC_GET_RESERVED24			304
-#define WLC_SET_RESERVED25			305
-#define WLC_GET_RESERVED26			306
-#define WLC_NPHY_SAMPLE_COLLECT			307	/* Nphy sample collect mode */
-#define WLC_UM_PRIV				308	/* for usermode driver private ioctl */
-#define WLC_GET_CMD				309
-							/* #define WLC_LAST				310 *//* Never used - can be reused */
-#define WLC_RESERVED8				311
-#define WLC_RESERVED9				312
-#define WLC_RESERVED1				313
-#define WLC_RESERVED2				314
-#define WLC_RESERVED3				315
-#define WLC_LAST				316
-
-#ifndef EPICTRL_COOKIE
-#define EPICTRL_COOKIE		0xABADCEDE
-#endif
-
-#define WL_DECRYPT_STATUS_SUCCESS	1
-#define WL_DECRYPT_STATUS_FAILURE	2
-#define WL_DECRYPT_STATUS_UNKNOWN	3
-
-/* allows user-mode app to poll the status of USB image upgrade */
-#define WLC_UPGRADE_SUCCESS			0
-#define WLC_UPGRADE_PENDING			1
-
-/* WLC_GET_AUTH, WLC_SET_AUTH values */
-#define WL_AUTH_OPEN_SYSTEM		0	/* d11 open authentication */
-#define WL_AUTH_SHARED_KEY		1	/* d11 shared authentication */
-#define WL_AUTH_OPEN_SHARED		2	/* try open, then shared if open failed w/rc 13 */
-
-/* Bit masks for radio disabled status - returned by WL_GET_RADIO */
-#define WL_RADIO_SW_DISABLE		(1<<0)
-#define WL_RADIO_HW_DISABLE		(1<<1)
-#define WL_RADIO_MPC_DISABLE		(1<<2)
-#define WL_RADIO_COUNTRY_DISABLE	(1<<3)	/* some countries don't support any channel */
-
-#define	WL_SPURAVOID_OFF	0
-#define	WL_SPURAVOID_ON1	1
-#define	WL_SPURAVOID_ON2	2
-
-/* Override bit for WLC_SET_TXPWR.  if set, ignore other level limits */
-#define WL_TXPWR_OVERRIDE	(1U<<31)
-
-#define WL_PHY_PAVARS_LEN	6	/* Phy type, Band range, chain, a1, b0, b1 */
-
-typedef struct wl_po {
-	u16 phy_type;	/* Phy type */
-	u16 band;
-	u16 cckpo;
-	u32 ofdmpo;
-	u16 mcspo[8];
-} wl_po_t;
-
-/* a large TX Power as an init value to factor out of min() calculations,
- * keep low enough to fit in an s8, units are .25 dBm
- */
-#define WLC_TXPWR_MAX		(127)	/* ~32 dBm = 1,500 mW */
-
-/* "diag" iovar argument and error code */
-#define WL_DIAG_INTERRUPT			1	/* d11 loopback interrupt test */
-#define WL_DIAG_LOOPBACK			2	/* d11 loopback data test */
-#define WL_DIAG_MEMORY				3	/* d11 memory test */
-#define WL_DIAG_LED				4	/* LED test */
-#define WL_DIAG_REG				5	/* d11/phy register test */
-#define WL_DIAG_SROM				6	/* srom read/crc test */
-#define WL_DIAG_DMA				7	/* DMA test */
-
-#define WL_DIAGERR_SUCCESS			0
-#define WL_DIAGERR_FAIL_TO_RUN			1	/* unable to run requested diag */
-#define WL_DIAGERR_NOT_SUPPORTED		2	/* diag requested is not supported */
-#define WL_DIAGERR_INTERRUPT_FAIL		3	/* loopback interrupt test failed */
-#define WL_DIAGERR_LOOPBACK_FAIL		4	/* loopback data test failed */
-#define WL_DIAGERR_SROM_FAIL			5	/* srom read failed */
-#define WL_DIAGERR_SROM_BADCRC			6	/* srom crc failed */
-#define WL_DIAGERR_REG_FAIL			7	/* d11/phy register test failed */
-#define WL_DIAGERR_MEMORY_FAIL			8	/* d11 memory test failed */
-#define WL_DIAGERR_NOMEM			9	/* diag test failed due to no memory */
-#define WL_DIAGERR_DMA_FAIL			10	/* DMA test failed */
-
-#define WL_DIAGERR_MEMORY_TIMEOUT		11	/* d11 memory test didn't finish in time */
-#define WL_DIAGERR_MEMORY_BADPATTERN		12	/* d11 memory test result in bad pattern */
-
-/* band types */
-#define	WLC_BAND_AUTO		0	/* auto-select */
-#define	WLC_BAND_5G		1	/* 5 Ghz */
-#define	WLC_BAND_2G		2	/* 2.4 Ghz */
-#define	WLC_BAND_ALL		3	/* all bands */
-
-/* band range returned by band_range iovar */
-#define WL_CHAN_FREQ_RANGE_2G      0
-#define WL_CHAN_FREQ_RANGE_5GL     1
-#define WL_CHAN_FREQ_RANGE_5GM     2
-#define WL_CHAN_FREQ_RANGE_5GH     3
-
-/* phy types (returned by WLC_GET_PHYTPE) */
-#define	WLC_PHY_TYPE_A		0
-#define	WLC_PHY_TYPE_B		1
-#define	WLC_PHY_TYPE_G		2
-#define	WLC_PHY_TYPE_N		4
-#define	WLC_PHY_TYPE_LP		5
-#define	WLC_PHY_TYPE_SSN	6
-#define	WLC_PHY_TYPE_HT		7
-#define	WLC_PHY_TYPE_LCN	8
-#define	WLC_PHY_TYPE_NULL	0xf
-
-/* MAC list modes */
-#define WLC_MACMODE_DISABLED	0	/* MAC list disabled */
-#define WLC_MACMODE_DENY	1	/* Deny specified (i.e. allow unspecified) */
-#define WLC_MACMODE_ALLOW	2	/* Allow specified (i.e. deny unspecified) */
-
-/*
- * 54g modes (basic bits may still be overridden)
- *
- * GMODE_LEGACY_B			Rateset: 1b, 2b, 5.5, 11
- *					Preamble: Long
- *					Shortslot: Off
- * GMODE_AUTO				Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54
- *					Extended Rateset: 6, 9, 12, 48
- *					Preamble: Long
- *					Shortslot: Auto
- * GMODE_ONLY				Rateset: 1b, 2b, 5.5b, 11b, 18, 24b, 36, 54
- *					Extended Rateset: 6b, 9, 12b, 48
- *					Preamble: Short required
- *					Shortslot: Auto
- * GMODE_B_DEFERRED			Rateset: 1b, 2b, 5.5b, 11b, 18, 24, 36, 54
- *					Extended Rateset: 6, 9, 12, 48
- *					Preamble: Long
- *					Shortslot: On
- * GMODE_PERFORMANCE			Rateset: 1b, 2b, 5.5b, 6b, 9, 11b, 12b, 18, 24b, 36, 48, 54
- *					Preamble: Short required
- *					Shortslot: On and required
- * GMODE_LRS				Rateset: 1b, 2b, 5.5b, 11b
- *					Extended Rateset: 6, 9, 12, 18, 24, 36, 48, 54
- *					Preamble: Long
- *					Shortslot: Auto
- */
-#define GMODE_LEGACY_B		0
-#define GMODE_AUTO		1
-#define GMODE_ONLY		2
-#define GMODE_B_DEFERRED	3
-#define GMODE_PERFORMANCE	4
-#define GMODE_LRS		5
-#define GMODE_MAX		6
-
-/* values for PLCPHdr_override */
-#define WLC_PLCP_AUTO	-1
-#define WLC_PLCP_SHORT	0
-#define WLC_PLCP_LONG	1
-
-/* values for g_protection_override and n_protection_override */
-#define WLC_PROTECTION_AUTO		-1
-#define WLC_PROTECTION_OFF		0
-#define WLC_PROTECTION_ON		1
-#define WLC_PROTECTION_MMHDR_ONLY	2
-#define WLC_PROTECTION_CTS_ONLY		3
-
-/* values for g_protection_control and n_protection_control */
-#define WLC_PROTECTION_CTL_OFF		0
-#define WLC_PROTECTION_CTL_LOCAL	1
-#define WLC_PROTECTION_CTL_OVERLAP	2
-
-/* values for n_protection */
-#define WLC_N_PROTECTION_OFF		0
-#define WLC_N_PROTECTION_OPTIONAL	1
-#define WLC_N_PROTECTION_20IN40		2
-#define WLC_N_PROTECTION_MIXEDMODE	3
-
-/* values for n_preamble_type */
-#define WLC_N_PREAMBLE_MIXEDMODE	0
-#define WLC_N_PREAMBLE_GF		1
-#define WLC_N_PREAMBLE_GF_BRCM          2
-
-/* values for band specific 40MHz capabilities */
-#define WLC_N_BW_20ALL			0
-#define WLC_N_BW_40ALL			1
-#define WLC_N_BW_20IN2G_40IN5G		2
-
-/* values to force tx/rx chain */
-#define WLC_N_TXRX_CHAIN0		0
-#define WLC_N_TXRX_CHAIN1		1
-
-/* bitflags for SGI support (sgi_rx iovar) */
-#define WLC_N_SGI_20			0x01
-#define WLC_N_SGI_40			0x02
-
-/* Values for PM */
-#define PM_OFF	0
-#define PM_MAX	1
-
-/* interference mitigation options */
-#define	INTERFERE_OVRRIDE_OFF	-1	/* interference override off */
-#define	INTERFERE_NONE	0	/* off */
-#define	NON_WLAN	1	/* foreign/non 802.11 interference, no auto detect */
-#define	WLAN_MANUAL	2	/* ACI: no auto detection */
-#define	WLAN_AUTO	3	/* ACI: auto detect */
-#define	WLAN_AUTO_W_NOISE	4	/* ACI: auto - detect and non 802.11 interference */
-#define	AUTO_ACTIVE	(1 << 7)	/* Auto is currently active */
-
-#define WL_RSSI_ANT_VERSION	1	/* current version of wl_rssi_ant_t */
-#define WL_ANT_RX_MAX		2	/* max 2 receive antennas */
-#define WL_ANT_HT_RX_MAX	3	/* max 3 receive antennas/cores */
-#define WL_ANT_IDX_1		0	/* antenna index 1 */
-#define WL_ANT_IDX_2		1	/* antenna index 2 */
-
-#ifndef WL_RSSI_ANT_MAX
-#define WL_RSSI_ANT_MAX		4	/* max possible rx antennas */
-#elif WL_RSSI_ANT_MAX != 4
-#error "WL_RSSI_ANT_MAX does not match"
-#endif
-
-/* RSSI per antenna */
-typedef struct {
-	u32 version;		/* version field */
-	u32 count;		/* number of valid antenna rssi */
-	s8 rssi_ant[WL_RSSI_ANT_MAX];	/* rssi per antenna */
-} wl_rssi_ant_t;
-
-#define NUM_PWRCTRL_RATES 12
-
-typedef struct {
-	u8 txpwr_band_max[NUM_PWRCTRL_RATES];	/* User set target */
-	u8 txpwr_limit[NUM_PWRCTRL_RATES];	/* reg and local power limit */
-	u8 txpwr_local_max;	/* local max according to the AP */
-	u8 txpwr_local_constraint;	/* local constraint according to the AP */
-	u8 txpwr_chan_reg_max;	/* Regulatory max for this channel */
-	u8 txpwr_target[2][NUM_PWRCTRL_RATES];	/* Latest target for 2.4 and 5 Ghz */
-	u8 txpwr_est_Pout[2];	/* Latest estimate for 2.4 and 5 Ghz */
-	u8 txpwr_opo[NUM_PWRCTRL_RATES];	/* On G phy, OFDM power offset */
-	u8 txpwr_bphy_cck_max[NUM_PWRCTRL_RATES];	/* Max CCK power for this band (SROM) */
-	u8 txpwr_bphy_ofdm_max;	/* Max OFDM power for this band (SROM) */
-	u8 txpwr_aphy_max[NUM_PWRCTRL_RATES];	/* Max power for A band (SROM) */
-	s8 txpwr_antgain[2];	/* Ant gain for each band - from SROM */
-	u8 txpwr_est_Pout_gofdm;	/* Pwr estimate for 2.4 OFDM */
-} tx_power_legacy_t;
-
-#define WL_TX_POWER_RATES_LEGACY	45
-#define WL_TX_POWER_MCS20_FIRST	        12
-#define WL_TX_POWER_MCS20_NUM	        16
-#define WL_TX_POWER_MCS40_FIRST	        28
-#define WL_TX_POWER_MCS40_NUM	        17
-
-
-#define WL_TX_POWER_RATES	       101
-#define WL_TX_POWER_CCK_FIRST	       0
-#define WL_TX_POWER_CCK_NUM	       4
-#define WL_TX_POWER_OFDM_FIRST	       4	/* Index for first 20MHz OFDM SISO rate */
-#define WL_TX_POWER_OFDM20_CDD_FIRST   12	/* Index for first 20MHz OFDM CDD rate */
-#define WL_TX_POWER_OFDM40_SISO_FIRST  52	/* Index for first 40MHz OFDM SISO rate */
-#define WL_TX_POWER_OFDM40_CDD_FIRST   60	/* Index for first 40MHz OFDM CDD rate */
-#define WL_TX_POWER_OFDM_NUM	       8
-#define WL_TX_POWER_MCS20_SISO_FIRST   20	/* Index for first 20MHz MCS SISO rate */
-#define WL_TX_POWER_MCS20_CDD_FIRST    28	/* Index for first 20MHz MCS CDD rate */
-#define WL_TX_POWER_MCS20_STBC_FIRST   36	/* Index for first 20MHz MCS STBC rate */
-#define WL_TX_POWER_MCS20_SDM_FIRST    44	/* Index for first 20MHz MCS SDM rate */
-#define WL_TX_POWER_MCS40_SISO_FIRST   68	/* Index for first 40MHz MCS SISO rate */
-#define WL_TX_POWER_MCS40_CDD_FIRST    76	/* Index for first 40MHz MCS CDD rate */
-#define WL_TX_POWER_MCS40_STBC_FIRST   84	/* Index for first 40MHz MCS STBC rate */
-#define WL_TX_POWER_MCS40_SDM_FIRST    92	/* Index for first 40MHz MCS SDM rate */
-#define WL_TX_POWER_MCS_1_STREAM_NUM   8
-#define WL_TX_POWER_MCS_2_STREAM_NUM   8
-#define WL_TX_POWER_MCS_32	       100	/* Index for 40MHz rate MCS 32 */
-#define WL_TX_POWER_MCS_32_NUM	       1
-
-/* sslpnphy specifics */
-#define WL_TX_POWER_MCS20_SISO_FIRST_SSN   12	/* Index for first 20MHz MCS SISO rate */
-
-/* tx_power_t.flags bits */
-#define WL_TX_POWER_F_ENABLED	1
-#define WL_TX_POWER_F_HW	2
-#define WL_TX_POWER_F_MIMO	4
-#define WL_TX_POWER_F_SISO	8
-
-typedef struct {
-	u32 flags;
-	chanspec_t chanspec;	/* txpwr report for this channel */
-	chanspec_t local_chanspec;	/* channel on which we are associated */
-	u8 local_max;	/* local max according to the AP */
-	u8 local_constraint;	/* local constraint according to the AP */
-	s8 antgain[2];	/* Ant gain for each band - from SROM */
-	u8 rf_cores;		/* count of RF Cores being reported */
-	u8 est_Pout[4];	/* Latest tx power out estimate per RF chain */
-	u8 est_Pout_act[4];	/* Latest tx power out estimate per RF chain
-				 * without adjustment
-				 */
-	u8 est_Pout_cck;	/* Latest CCK tx power out estimate */
-	u8 tx_power_max[4];	/* Maximum target power among all rates */
-	u8 tx_power_max_rate_ind[4];	/* Index of the rate with the max target power */
-	u8 user_limit[WL_TX_POWER_RATES];	/* User limit */
-	u8 reg_limit[WL_TX_POWER_RATES];	/* Regulatory power limit */
-	u8 board_limit[WL_TX_POWER_RATES];	/* Max power board can support (SROM) */
-	u8 target[WL_TX_POWER_RATES];	/* Latest target power */
-} tx_power_t;
-
-typedef struct tx_inst_power {
-	u8 txpwr_est_Pout[2];	/* Latest estimate for 2.4 and 5 Ghz */
-	u8 txpwr_est_Pout_gofdm;	/* Pwr estimate for 2.4 OFDM */
-} tx_inst_power_t;
-
-/* Message levels */
-#define WL_ERROR_VAL		0x00000001
-#define WL_TRACE_VAL		0x00000002
-
-/* maximum channels returned by the get valid channels iovar */
-#define WL_NUMCHANNELS		64
-#define WL_NUMCHANSPECS		100
-
-struct tsinfo_arg {
-	u8 octets[3];
-};
-
-#define	NFIFO			6	/* # tx/rx fifopairs */
-
-struct wl_msglevel2 {
-	u32 low;
-	u32 high;
-};
-
-/* structure for per-tid ampdu control */
-struct ampdu_tid_control {
-	u8 tid;		/* tid */
-	u8 enable;		/* enable/disable */
-};
-
-/* structure for identifying ea/tid for sending addba/delba */
-struct ampdu_ea_tid {
-	u8 ea[ETH_ALEN];	/* Station address */
-	u8 tid;		/* tid */
-};
-/* structure for identifying retry/tid for retry_limit_tid/rr_retry_limit_tid */
-struct ampdu_retry_tid {
-	u8 tid;		/* tid */
-	u8 retry;		/* retry value */
-};
-
-
-/* Software feature flag defines used by wlfeatureflag */
-#define WL_SWFL_NOHWRADIO	0x0004
-#define WL_SWFL_FLOWCONTROL     0x0008	/* Enable backpressure to OS stack */
-#define WL_SWFL_WLBSSSORT	0x0010	/* Per-port supports sorting of BSS */
-
-#define WL_LIFETIME_MAX 0xFFFF	/* Max value in ms */
-
-
-/* Pattern matching filter. Specifies an offset within received packets to
- * start matching, the pattern to match, the size of the pattern, and a bitmask
- * that indicates which bits within the pattern should be matched.
- */
-typedef struct wl_pkt_filter_pattern {
-	u32 offset;		/* Offset within received packet to start pattern matching.
-				 * Offset '0' is the first byte of the ethernet header.
-				 */
-	u32 size_bytes;	/* Size of the pattern.  Bitmask must be the same size. */
-	u8 mask_and_pattern[1];	/* Variable length mask and pattern data.  mask starts
-					 * at offset 0.  Pattern immediately follows mask.
-					 */
-} wl_pkt_filter_pattern_t;
-
-/* IOVAR "pkt_filter_add" parameter. Used to install packet filters. */
-typedef struct wl_pkt_filter {
-	u32 id;		/* Unique filter id, specified by app. */
-	u32 type;		/* Filter type (WL_PKT_FILTER_TYPE_xxx). */
-	u32 negate_match;	/* Negate the result of filter matches */
-	union {			/* Filter definitions */
-		wl_pkt_filter_pattern_t pattern;	/* Pattern matching filter */
-	} u;
-} wl_pkt_filter_t;
-
-#define WL_PKT_FILTER_FIXED_LEN		  offsetof(wl_pkt_filter_t, u)
-#define WL_PKT_FILTER_PATTERN_FIXED_LEN	  offsetof(wl_pkt_filter_pattern_t, mask_and_pattern)
-
-/* IOVAR "pkt_filter_enable" parameter. */
-typedef struct wl_pkt_filter_enable {
-	u32 id;		/* Unique filter id */
-	u32 enable;		/* Enable/disable bool */
-} wl_pkt_filter_enable_t;
-
-
-#define	WLC_RSSI_INVALID	 0	/* invalid RSSI value */
-
-/* n-mode support capability */
-/* 2x2 includes both 1x1 & 2x2 devices
- * reserved #define 2 for future when we want to separate 1x1 & 2x2 and
- * control it independently
- */
-#define WL_11N_2x2			1
-#define WL_11N_3x3			3
-#define WL_11N_4x4			4
-
-/* define 11n feature disable flags */
-#define WLFEATURE_DISABLE_11N		0x00000001
-#define WLFEATURE_DISABLE_11N_STBC_TX	0x00000002
-#define WLFEATURE_DISABLE_11N_STBC_RX	0x00000004
-#define WLFEATURE_DISABLE_11N_SGI_TX	0x00000008
-#define WLFEATURE_DISABLE_11N_SGI_RX	0x00000010
-#define WLFEATURE_DISABLE_11N_AMPDU_TX	0x00000020
-#define WLFEATURE_DISABLE_11N_AMPDU_RX	0x00000040
-#define WLFEATURE_DISABLE_11N_GF	0x00000080
-
-#define WL_EVENTING_MASK_LEN	16
-
-#define TOE_TX_CSUM_OL		0x00000001
-#define TOE_RX_CSUM_OL		0x00000002
-
-#define PM_OFF	0
-#define PM_MAX	1
-#define PM_FAST 2
-
-typedef enum sup_auth_status {
-	WLC_SUP_DISCONNECTED = 0,
-	WLC_SUP_CONNECTING,
-	WLC_SUP_IDREQUIRED,
-	WLC_SUP_AUTHENTICATING,
-	WLC_SUP_AUTHENTICATED,
-	WLC_SUP_KEYXCHANGE,
-	WLC_SUP_KEYED,
-	WLC_SUP_TIMEOUT,
-	WLC_SUP_LAST_BASIC_STATE,
-	WLC_SUP_KEYXCHANGE_WAIT_M1 = WLC_SUP_AUTHENTICATED,
-	WLC_SUP_KEYXCHANGE_PREP_M2 = WLC_SUP_KEYXCHANGE,
-	WLC_SUP_KEYXCHANGE_WAIT_M3 = WLC_SUP_LAST_BASIC_STATE,
-	WLC_SUP_KEYXCHANGE_PREP_M4,
-	WLC_SUP_KEYXCHANGE_WAIT_G1,
-	WLC_SUP_KEYXCHANGE_PREP_G2
-} sup_auth_status_t;
 #endif				/* _wlioctl_h_ */