From bde151296a27c8ffaf000bb92ae6b318b8b3e0ec Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Tue, 11 Nov 2014 20:00:10 +0100
Subject: [PATCH] net: phy: micrel: refactor broadcast disable
Refactor and clean up broadcast disable.
Some Micrel PHYs have a broadcast-off bit in the Operation Mode Strap
Override register which can be used to disable PHY address 0 as the
broadcast address, so that it can be used as a unique (non-broadcast)
address on a shared bus.
Note that the KSZPHY_OMSO_RMII_OVERRIDE bit is set by default on
KSZ8021/8031.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
---
drivers/net/phy/micrel.c | 24 ++++++++++++++++++++++--
1 file changed, 22 insertions(+), 2 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index d962a2866bba..21abe5ade3df 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -184,6 +184,25 @@ static int kszphy_setup_led(struct phy_device *phydev,
return rc < 0 ? rc : 0;
}
+/* Disable PHY address 0 as the broadcast address, so that it can be used as a
+ * unique (non-broadcast) address on a shared bus.
+ */
+static int kszphy_broadcast_disable(struct phy_device *phydev)
+{
+ int ret;
+
+ ret = phy_read(phydev, MII_KSZPHY_OMSO);
+ if (ret < 0)
+ goto out;
+
+ ret = phy_write(phydev, MII_KSZPHY_OMSO, ret | KSZPHY_OMSO_B_CAST_OFF);
+out:
+ if (ret)
+ dev_err(&phydev->dev, "failed to disable broadcast address\n");
+
+ return ret;
+}
+
static int kszphy_config_init(struct phy_device *phydev)
{
return 0;
@@ -197,7 +216,6 @@ static int kszphy_config_init_led8041(struct phy_device *phydev)
static int ksz8021_config_init(struct phy_device *phydev)
{
- const u16 val = KSZPHY_OMSO_B_CAST_OFF | KSZPHY_OMSO_RMII_OVERRIDE;
int rc;
rc = kszphy_setup_led(phydev, 0x1f, 4);
@@ -207,7 +225,9 @@ static int ksz8021_config_init(struct phy_device *phydev)
rc = ksz_config_flags(phydev);
if (rc < 0)
return rc;
- rc = phy_write(phydev, MII_KSZPHY_OMSO, val);
+
+ rc = kszphy_broadcast_disable(phydev);
+
return rc < 0 ? rc : 0;
}