diff --git a/arch/x86/kernel/e820_32.c b/arch/x86/kernel/e820_32.c
index 80444c5c9b14..0240cd778365 100644
--- a/arch/x86/kernel/e820_32.c
+++ b/arch/x86/kernel/e820_32.c
@@ -450,38 +450,25 @@ int __init sanitize_e820_map(struct e820entry * biosmap, char * pnr_map)
  * thinkpad 560x, for example, does not cooperate with the memory
  * detection code.)
  */
-int __init copy_e820_map(struct e820entry * biosmap, int nr_map)
+int __init copy_e820_map(struct e820entry *biosmap, int nr_map)
 {
 	/* Only one memory region (or negative)? Ignore it */
 	if (nr_map < 2)
 		return -1;
 
 	do {
-		unsigned long long start = biosmap->addr;
-		unsigned long long size = biosmap->size;
-		unsigned long long end = start + size;
-		unsigned long type = biosmap->type;
+		u64 start = biosmap->addr;
+		u64 size = biosmap->size;
+		u64 end = start + size;
+		u32 type = biosmap->type;
 
 		/* Overflow in 64 bits? Ignore the memory map. */
 		if (start > end)
 			return -1;
 
-		/*
-		 * Some BIOSes claim RAM in the 640k - 1M region.
-		 * Not right. Fix it up.
-		 */
-		if (type == E820_RAM) {
-			if (start < 0x100000ULL && end > 0xA0000ULL) {
-				if (start < 0xA0000ULL)
-					add_memory_region(start, 0xA0000ULL-start, type);
-				if (end <= 0x100000ULL)
-					continue;
-				start = 0x100000ULL;
-				size = end - start;
-			}
-		}
 		add_memory_region(start, size, type);
-	} while (biosmap++,--nr_map);
+	} while (biosmap++, --nr_map);
+
 	return 0;
 }
 
diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c
index 2b3e5d45176b..14e293edd23f 100644
--- a/arch/x86/kernel/setup_32.c
+++ b/arch/x86/kernel/setup_32.c
@@ -385,15 +385,60 @@ unsigned long __init find_max_low_pfn(void)
 	return max_low_pfn;
 }
 
+#define BIOS_EBDA_SEGMENT 0x40E
+#define BIOS_LOWMEM_KILOBYTES 0x413
+
 /*
- * workaround for Dell systems that neglect to reserve EBDA
+ * The BIOS places the EBDA/XBDA at the top of conventional
+ * memory, and usually decreases the reported amount of
+ * conventional memory (int 0x12) too. This also contains a
+ * workaround for Dell systems that neglect to reserve EBDA.
+ * The same workaround also avoids a problem with the AMD768MPX
+ * chipset: reserve a page before VGA to prevent PCI prefetch
+ * into it (errata #56). Usually the page is reserved anyways,
+ * unless you have no PS/2 mouse plugged in.
  */
 static void __init reserve_ebda_region(void)
 {
-	unsigned int addr;
-	addr = get_bios_ebda();
-	if (addr)
-		reserve_bootmem(addr, PAGE_SIZE, BOOTMEM_DEFAULT);
+	unsigned int lowmem, ebda_addr;
+
+	/* To determine the position of the EBDA and the */
+	/* end of conventional memory, we need to look at */
+	/* the BIOS data area. In a paravirtual environment */
+	/* that area is absent. We'll just have to assume */
+	/* that the paravirt case can handle memory setup */
+	/* correctly, without our help. */
+#ifdef CONFIG_PARAVIRT
+	if ((boot_params.hdr.version >= 0x207) &&
+			(boot_params.hdr.hardware_subarch != 0)) {
+		return;
+	}
+#endif
+
+	/* end of low (conventional) memory */
+	lowmem = *(unsigned short *)__va(BIOS_LOWMEM_KILOBYTES);
+	lowmem <<= 10;
+
+	/* start of EBDA area */
+	ebda_addr = *(unsigned short *)__va(BIOS_EBDA_SEGMENT);
+	ebda_addr <<= 4;
+
+	/* Fixup: bios puts an EBDA in the top 64K segment */
+	/* of conventional memory, but does not adjust lowmem. */
+	if ((lowmem - ebda_addr) <= 0x10000)
+		lowmem = ebda_addr;
+
+	/* Fixup: bios does not report an EBDA at all. */
+	/* Some old Dells seem to need 4k anyhow (bugzilla 2990) */
+	if ((ebda_addr == 0) && (lowmem >= 0x9f000))
+		lowmem = 0x9f000;
+
+	/* Paranoia: should never happen, but... */
+	if ((lowmem == 0) || (lowmem >= 0x100000))
+		lowmem = 0x9f000;
+
+	/* reserve all memory between lowmem and the 1MB mark */
+	reserve_bootmem(lowmem, 0x100000 - lowmem, BOOTMEM_DEFAULT);
 }
 
 #ifndef CONFIG_NEED_MULTIPLE_NODES
@@ -617,16 +662,9 @@ void __init setup_bootmem_allocator(void)
 	 */
 	reserve_bootmem(0, PAGE_SIZE, BOOTMEM_DEFAULT);
 
-	/* reserve EBDA region, it's a 4K region */
+	/* reserve EBDA region */
 	reserve_ebda_region();
 
-    /* could be an AMD 768MPX chipset. Reserve a page  before VGA to prevent
-       PCI prefetch into it (errata #56). Usually the page is reserved anyways,
-       unless you have no PS/2 mouse plugged in. */
-	if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
-	    boot_cpu_data.x86 == 6)
-	     reserve_bootmem(0xa0000 - 4096, 4096, BOOTMEM_DEFAULT);
-
 #ifdef CONFIG_SMP
 	/*
 	 * But first pinch a few for the stack/trampoline stuff