From f8264340e694604863255cc0276491d17c402390 Mon Sep 17 00:00:00 2001
From: Dmitry Torokhov <dtor@vmware.com>
Date: Mon, 25 Feb 2013 10:56:01 -0800
Subject: [PATCH] USB: xhci - fix bit definitions for IMAN register
According to XHCI specification (5.5.2.1) the IP is bit 0 and IE is bit 1
of IMAN register. Previously their definitions were reversed.
Even though there are no ill effects being observed from the swapped
definitions (because IMAN_IP is RW1C and in legacy PCI case we come in
with it already set to 1 so it was clearing itself even though we were
setting IMAN_IE instead of IMAN_IP), we should still correct the values.
This patch should be backported to kernels as old as 2.6.36, that
contain the commit 4e833c0b87a30798e67f06120cecebef6ee9644c "xhci: don't
re-enable IE constantly".
Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Cc: stable@vger.kernel.org
---
drivers/usb/host/xhci.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index f791bd0aee6c..2c510e4a7d4c 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -206,8 +206,8 @@ struct xhci_op_regs {
/* bits 12:31 are reserved (and should be preserved on writes). */
/* IMAN - Interrupt Management Register */
-#define IMAN_IP (1 << 1)
-#define IMAN_IE (1 << 0)
+#define IMAN_IE (1 << 1)
+#define IMAN_IP (1 << 0)
/* USBSTS - USB status - status bitmasks */
/* HC not running - set to 1 when run/stop bit is cleared. */