[ Upstream commit fac165f22ac947b55407cd3a60a2a9824f905235 ]
The definition of CS42L42_ADC_PDN_MASK was incorrectly defined
as the HP_PDN bit.
Fixes: 2c394ca79604 ("ASoC: Add support for CS42L42 codec")
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210616135604.19363-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 375904e3931955fcf0a847f029b2492a117efc43 ]
After calling clk_prepare_enable(), clk_disable_unprepare() need
be called when calling clk_set_rate() failed.
Fixes: 0bf750f4cbe1 ("ASoC: hisilicon: Add hi6210 i2s audio driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210518044514.607010-1-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e072b2671606c77538d6a4dd5dda80b508cb4816 ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1620789145-14936-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 833bc4cf9754643acc69b3c6b65988ca78df4460 ]
This error path returns zero (success) but it should return -EINVAL.
Fixes: 3333cb7187b9 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/YKXuyGEzhPT35R3G@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd8499d5c03ba260e3191e90236d0e5f6b147563 ]
The GPIO configuration cannot be applied if the registers are inaccessible.
This prevented the headset mic from working on the Dell XPS 13 9343.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=114171
Signed-off-by: David Ward <david.ward@gatech.edu>
Link: https://lore.kernel.org/r/20210418134658.4333-5-david.ward@gatech.edu
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa2f9c12821e6a4ba1df4fb34a3dbc6a2a1ee7fe ]
The ALC3263 codec on the XPS 13 9343 is also found on the Latitude 13 7350
and Venue 11 Pro 7140. They require the same handling for the combo jack to
work with a headset: GPIO pin 6 must be set.
The HDA driver always sets this pin on the ALC3263, which it distinguishes
by the codec vendor/device ID 0x10ec0288 and PCI subsystem vendor ID 0x1028
(Dell). The ASoC driver does not use PCI, so adapt this check to use DMI to
determine if Dell is the system vendor.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961
Signed-off-by: David Ward <david.ward@gatech.edu>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210418134658.4333-6-david.ward@gatech.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7a48c710defa0e0fef54d42b7d9e4ab596e2761 ]
When using the driver in I2S TDM mode, the fsl_esai_startup()
function rewrites the number of slots previously set by the
fsl_esai_set_dai_tdm_slot() function to 2.
To fix this, let's use the saved slot count value or, if TDM
is not used and the number of slots is not set, the driver will use
the default value (2), which is set by fsl_esai_probe().
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20210402081405.9892-1-shc_work@mail.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c0d6e482062eb5c06ecccfab340abc523bdca00 ]
card->owner is a required property and since commit 81033c6b584b ("ALSA:
core: Warn on empty module") a warning is issued if it is empty. Add it.
This fixes following warning observed on Lamobo R1:
WARNING: CPU: 1 PID: 190 at sound/core/init.c:207 snd_card_new+0x430/0x480 [snd]
Modules linked in: sun4i_codec(E+) sun4i_backend(E+) snd_soc_core(E) ...
CPU: 1 PID: 190 Comm: systemd-udevd Tainted: G C E 5.10.0-1-armmp #1 Debian 5.10.4-1
Hardware name: Allwinner sun7i (A20) Family
Call trace:
(snd_card_new [snd])
(snd_soc_bind_card [snd_soc_core])
(snd_soc_register_card [snd_soc_core])
(sun4i_codec_probe [sun4i_codec])
Fixes: 45fb6b6f2aa3 ("ASoC: sunxi: add support for the on-chip codec on early Allwinner SoCs")
Related: commit 3c27ea23ffb4 ("ASoC: qcom: Set card->owner to avoid warnings")
Related: commit ec653df2a0cb ("drm/vc4/vc4_hdmi: fill ASoC card owner")
Cc: linux-arm-kernel@lists.infradead.org
Cc: alsa-devel@alsa-project.org
Signed-off-by: Bastian Germann <bage@linutronix.de>
Link: https://lore.kernel.org/r/20210331151843.30583-1-bage@linutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16b82e75c15a7dbd564ea3654f3feb61df9e1e6f ]
The input MCLK is 12.288MHz, the desired output sysclk is 11.2896MHz
and sample rate is 44100Hz, with the configuration pllprescale=2,
postscale=sysclkdiv=1, some chip may have wrong bclk
and lrclk output with pll enabled in master mode, but with the
configuration pllprescale=1, postscale=2, the output clock is correct.
>From Datasheet, the PLL performs best when f2 is between
90MHz and 100MHz when the desired sysclk output is 11.2896MHz
or 12.288MHz, so sysclkdiv = 2 (f2/8) is the best choice.
So search available sysclk_divs from 2 to 1 other than from 1 to 2.
Fixes: 84fdc00d519f ("ASoC: codec: wm9860: Refactor PLL out freq search")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/1616150926-22892-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit aa65bacdb70e549a81de03ec72338e1047842883 upstream.
The SST firmware's media and deep-buffer inputs are hardcoded to
S16LE, the corresponding DAIs don't have a hw_params callback and
their prepare callback also does not take the format into account.
So far the advertising of non working S24LE support has not caused
issues because pulseaudio defaults to S16LE, but changing pulse-audio's
config to use S24LE will result in broken sound.
Pipewire is replacing pulse now and pipewire prefers S24LE over S16LE
when available, causing the problem of the broken S24LE support to
come to the surface now.
Cc: stable@vger.kernel.org
BugLink: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/866
Fixes: 098c2cd281409 ("ASoC: Intel: Atom: add 24-bit support for media playback and capture")
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210324132711.216152-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dbf54a9534350d6aebbb34f5c1c606b81a4f35dd ]
Simple-card/audio-graph-card drivers do not handle MCLK clock when it
is specified in the codec device node. The expectation here is that,
the codec should actually own up the MCLK clock and do necessary setup
in the driver.
Suggested-by: Mark Brown <broonie@kernel.org>
Suggested-by: Michael Walle <michael@walle.cc>
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Link: https://lore.kernel.org/r/1615829492-8972-3-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 19325cfea04446bc79b36bffd4978af15f46a00e ]
This delay is part of the power-up sequence defined in the datasheet.
A runtime_resume is a power-up so must also include the delay.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210305173442.195740-6-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72d904763ae6a8576e7ad034f9da4f0e3c44bf24 ]
The minimum value is 0x3f (-63dB), which also is mute
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210305173442.195740-4-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb18c678754ce1514100fb4c0bf6113b5af36c48 ]
Most steps in this table are steps of 3dB (300 centi-dB), so we can
simplify the table.
This not only reduces the amount of space it takes inside the kernel,
this also makes alsa-lib's mixer code actually accept the table, where
as before this change alsa-lib saw the "ADC PGA Gain" control as a
control without a dB scale.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210228160441.241110-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f86f58e3594fb0ab1993d833d3b9a2496f3c928c ]
According to the SGTL5000 datasheet [1], the DAP_AVC_CTRL register has
the following bit field definitions:
| BITS | FIELD | RW | RESET | DEFINITION |
| 15 | RSVD | RO | 0x0 | Reserved |
| 14 | RSVD | RW | 0x1 | Reserved |
| 13:12 | MAX_GAIN | RW | 0x1 | Max Gain of AVC in expander mode |
| 11:10 | RSVD | RO | 0x0 | Reserved |
| 9:8 | LBI_RESP | RW | 0x1 | Integrator Response |
| 7:6 | RSVD | RO | 0x0 | Reserved |
| 5 | HARD_LMT_EN | RW | 0x0 | Enable hard limiter mode |
| 4:1 | RSVD | RO | 0x0 | Reserved |
| 0 | EN | RW | 0x0 | Enable/Disable AVC |
The original default value written to the DAP_AVC_CTRL register during
sgtl5000_i2c_probe() was 0x0510. This would incorrectly write values to
bits 4 and 10, which are defined as RESERVED. It would also not set
bits 12 and 14 to their correct RESET values of 0x1, and instead set
them to 0x0. While the DAP_AVC module is effectively disabled because
the EN bit is 0, this default value is still writing invalid values to
registers that are marked as read-only and RESERVED as well as not
setting bits 12 and 14 to their correct default values as defined by the
datasheet.
The correct value that should be written to the DAP_AVC_CTRL register is
0x5100, which configures the register bits to the default values defined
by the datasheet, and prevents any writes to bits defined as
'read-only'. Generally speaking, it is best practice to NOT attempt to
write values to registers/bits defined as RESERVED, as it generally
produces unwanted/undefined behavior, or errors.
Also, all credit for this patch should go to my colleague Dan MacDonald
<dmacdonald@curbellmedical.com> for finding this error in the first
place.
[1] https://www.nxp.com/docs/en/data-sheet/SGTL5000.pdf
Signed-off-by: Benjamin Rood <benjaminjrood@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210219183308.GA2117@ubuntu-dev
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eee51df776bd6cac10a76b2779a9fdee3f622b2b ]
The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB,
not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace
apps which translate the dB scale to a linear scale. With the logarithmic
dB scale being of by a factor of 10 we loose all precision in the lower
area of the range when apps translate things to a linear scale.
E.g. the 0 dB default, which corresponds with a value of 47 of the
0 - 127 range for the control, would be shown as 0/100 in alsa-mixer.
Since the centi-dB values used in the TLV struct cannot represent the
0.375 dB step size used by these controls, change the TLV definition
for them to specify a min and max value instead of min + stepsize.
Note this mirrors commit 3f31f7d9b540 ("ASoC: rt5670: Fix dac- and adc-
vol-tlv values being off by a factor of 10") which made the exact same
change to the rt5670 codec driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210226143817.84287-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cfa26ed1f9f885c2fd8f53ca492989d1e16d0199 ]
The adc_vol_tlv volume-control has a range from -17.625 dB to +30 dB,
not -176.25 dB to + 300 dB. This wrong scale is esp. a problem in userspace
apps which translate the dB scale to a linear scale. With the logarithmic
dB scale being of by a factor of 10 we loose all precision in the lower
area of the range when apps translate things to a linear scale.
E.g. the 0 dB default, which corresponds with a value of 47 of the
0 - 127 range for the control, would be shown as 0/100 in alsa-mixer.
Since the centi-dB values used in the TLV struct cannot represent the
0.375 dB step size used by these controls, change the TLV definition
for them to specify a min and max value instead of min + stepsize.
Note this mirrors commit 3f31f7d9b540 ("ASoC: rt5670: Fix dac- and adc-
vol-tlv values being off by a factor of 10") which made the exact same
change to the rt5670 codec driver.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210226143817.84287-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 856fe64da84c95a1d415564b981ae3908eea2a76 ]
There are two issues with this code. The first error path forgot to set
the error code and instead returns success. The second error path
doesn't clean up.
Fixes: 272b5edd3b8f ("ASoC: Add support for CS42L56 CODEC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/X9NE/9nK9/TuxuL+@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb224c3e3e41d940612d4cc9573289cdbd5cb8f5 ]
haswell machine board is missing pm_ops what prevents it from undergoing
suspend-resume procedure successfully. Assign default snd_soc_pm_ops so
this is no longer the case.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201217105401.27865-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f373a811fd9a69fc8bafb9bcb41d2cfa36c62665 upstream.
Return -ETIMEDOUT if the dsp boot times out instead of returning
success.
Fixes: cb6a55284629 ("ASoC: Intel: cnl: Add sst library functions for cnl platform")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/X9NEvCzuN+IObnTN@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c6679b5cb120f07652418524ab186ac47680b49 upstream.
A widget's "dirty" list_head, much like its "list" list_head, eventually
chains back to a list_head on the snd_soc_card itself. This means that
the list can stick around even after the widget (or all widgets) have
been freed. Currently, however, widgets that are in the dirty list when
freed remain there, corrupting the entire list and leading to memory
errors and undefined behavior when the list is next accessed or
modified.
I encountered this issue when a component failed to probe relatively
late in snd_soc_bind_card(), causing it to bail out and call
soc_cleanup_card_resources(), which eventually called
snd_soc_dapm_free() with widgets that were still dirty from when they'd
been added.
Fixes: db432b414e20 ("ASoC: Do DAPM power checks only for widgets changed since last run")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/f8b5f031d50122bf1a9bfc9cae046badf4a7a31a.1607822410.git.tommyhebb@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 85a7555575a0e48f9b73db310d0d762a08a46d63 ]
The error handling frees "ctl" but it's still on the "dsp->ctl_list"
list so that could result in a use after free. Remove it from the list
before returning.
Fixes: 2323736dca72 ("ASoC: wm_adsp: Add basic support for rev 1 firmware file format")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/X9B0keV/02wrx9Xs@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c1fb2653a0c2e3f310c07eacd8fc3a10e08c97a ]
jz4740_i2s_set_sysclk() does not check the return values of clk_get(),
while the file dereferences the pointers in clk_put().
Add the missed checks to fix it.
Fixes: 11bd3dd1b7c2 ("ASoC: Add JZ4740 ASoC support")
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20201203144227.418194-1-hslester96@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e7aace13df24ff72511f29c14ebbfe638ef733c ]
In the normal path, we should not free the arizona,
we should return immediately. It will be free when
call remove operation.
Fixes: 31833ead95c2c ("ASoC: arizona: Move request of speaker IRQs into bus probe")
Reported-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20201111130923.220186-2-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 193aa0a043645220d2a2f783ba06ae13d4601078 ]
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context.
Fixes: 31833ead95c2c ("ASoC: arizona: Move request of speaker IRQs into bus probe")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20201111041326.1257558-4-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c22b80f61540ea99d9b4af0127315338755f05b ]
soc-pcm's dpcm_fe_dai_do_trigger() supported DRAIN commnad up to kernel
v5.4 where explicit switch(cmd) has been introduced which takes into
account all SNDRV_PCM_TRIGGER_xxx but SNDRV_PCM_TRIGGER_DRAIN. Update
switch statement to reactive support for it.
As DRAIN is somewhat unique by lacking negative/stop counterpart, bring
behaviour of dpcm_fe_dai_do_trigger() for said command back to its
pre-v5.4 state by adding it to START/RESUME/PAUSE_RELEASE group.
Fixes: acbf27746ecf ("ASoC: pcm: update FE/BE trigger order based on the command")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20201026100129.8216-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd6327fda2f3ded85b69b3c3125c99aaa51c7881 ]
lpass_pcm_data is not freed in error paths. Free it in
error paths to avoid memory leak.
Fixes: 022d00ee0b55 ("ASoC: lpass-platform: Fix broken pcm data usage")
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/1605416210-14530-1-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 753a6e17942f6f425ca622e1610625998312ad89 ]
i2sctl register value is set to 0 during hw_free(). This
impacts any ongoing concurrent session on the same i2s
port. As trigger() stop already resets enable bit to 0,
there is no need of explicit hw_free. Removing it to
fix the issue.
Fixes: 80beab8e1d86 ("ASoC: qcom: Add LPASS CPU DAI driver")
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1597402388-14112-7-git-send-email-rohitkr@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5fd188215d4eb52703600d8986b22311099a5940 ]
lpass_pcm_data is never freed. Free it in close
ops to avoid memory leak.
Fixes: 022d00ee0b55 ("ASoC: lpass-platform: Fix broken pcm data usage")
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/1597402388-14112-5-git-send-email-rohitkr@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 175fc928198236037174e5c5c066fe3c4691903e ]
Propagate the error code from request_irq(), rather than returning
-EBUSY.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1iNIqh-0000tW-EZ@rmk-PC.armlinux.org.uk
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit deca195383a6085be62cb453079e03e04d618d6e ]
Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count if pm_runtime_put is not called in
error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails.
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20200613204422.24484-1-wu000273@umn.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 062fa09f44f4fb3776a23184d5d296b0c8872eb9 ]
When power_up_sst() fails, stream needs to be freed
just like when try_module_get() fails. However, current
code is returning directly and ends up leaking memory.
Fixes: 0121327c1a68b ("ASoC: Intel: mfld-pcm: add control for powering up/down dsp")
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200813084112.26205-1-dinghao.liu@zju.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ff69c97ef84c9f7795adb49e9f07c9adcdd0c288 ]
For some reason interrupt set and clear register offsets are
not set correctly.
This patch corrects them!
Fixes: 585e881e5b9e ("ASoC: codecs: Add msm8916-wcd analog codec")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200811103452.20448-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88cee34b776f80d2da04afb990c2a28c36799c43 ]
This field is required for ASoC cards. Not setting it will result in a
module->name pointer being NULL and generate problems such as
cat /proc/asound/modules
0 (efault)
Fixes: 76016322ec56 ('ASoC: Intel: Add Broxton-P machine driver')
Reported-by: Jaroslav Kysela <perex@perex.cz>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200625191308.3322-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5cacc6f5764e94fa753b2c1f5f7f1f3f74286e82 upstream.
The RT5670_PWR_ANLG1 register has 3 bits to select the LDO voltage,
so the correct mask is 0x7 not 0x3.
Because of this wrong mask we were programming the ldo bits
to a setting of binary 001 (0x05 & 0x03) instead of binary 101
when moving to SND_SOC_BIAS_PREPARE.
According to the datasheet 001 is a reserved value, so no idea
what it did, since the driver was working fine before I guess we
got lucky and it does something which is ok.
Fixes: 5e8351de740d ("ASoC: add RT5670 CODEC driver")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200628155231.71089-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f141a422159a199f4c8dedb7e0df55b3b2cf16cd ]
Calling pm_runtime_get_sync increments the counter even in case of
failure, causing incorrect ref count if pm_runtime_put is not called in
error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails.
Fixes: fc05a5b22253 ("ASoC: rockchip: add support for pdm controller")
Signed-off-by: Qiushi Wu <wu000273@umn.edu>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20200613205158.27296-1-wu000273@umn.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 36124fb19f1ae68a500cd76a76d40c6e81bee346 ]
fsl_asrc_dma_hw_params() invokes dma_request_channel() or
fsl_asrc_get_dma_channel(), which returns a reference of the specified
dma_chan object to "pair->dma_chan[dir]" with increased refcnt.
The reference counting issue happens in one exception handling path of
fsl_asrc_dma_hw_params(). When config DMA channel failed for Back-End,
the function forgets to decrease the refcnt increased by
dma_request_channel() or fsl_asrc_get_dma_channel(), causing a refcnt
leak.
Fix this issue by calling dma_release_channel() when config DMA channel
failed.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Link: https://lore.kernel.org/r/1590415966-52416-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a697ae6ea56e23397341b027098c1b11d9ab13da ]
davinci_mcasp_get_dma_type() invokes dma_request_chan(), which returns a
reference of the specified dma_chan object to "chan" with increased
refcnt.
When davinci_mcasp_get_dma_type() returns, local variable "chan" becomes
invalid, so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in one exception handling path of
davinci_mcasp_get_dma_type(). When chan device is NULL, the function
forgets to decrease the refcnt increased by dma_request_chan(), causing
a refcnt leak.
Fix this issue by calling dma_release_channel() when chan device is
NULL.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/1587818916-38730-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 326b509238171d37402dbe308e154cc234ed1960 ]
If we don't find any pcm, pcm will point at address at an offset from
the the list head and not a meaningful structure. Fix this by returning
correct pcm if found and NULL if not. Found with coccinelle.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20200415162849.308-1-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b94e164759b82d0c1c80d4b1c8f12c9bee83f11d ]
The HDMI?_SEL register maps up to four stereo SSI data lanes onto the
sdata[0..3] inputs of the HDMI output block. The upper half of the
register contains four blocks of 4 bits, with the most significant
controlling the sdata3 line and the least significant the sdata0 line.
The shift calculation has an off-by-one error, causing the parent SSI to
be mapped to sdata3, the first multi-SSI child to sdata0 and so forth.
As the parent SSI transmits the stereo L/R channels, and the HDMI core
expects it on the sdata0 line, this causes no audio to be output when
playing stereo audio on a multichannel capable HDMI out, and
multichannel audio has permutated channels.
Fix the shift calculation to map the parent SSI to sdata0, the first
child to sdata1 etc.
Signed-off-by: Matthias Blankertz <matthias.blankertz@cetitec.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20200415141017.384017-3-matthias.blankertz@cetitec.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa7812737f2877e192d57626cbe8825cc7cf6de9 ]
As mentioned slightly out of patch context in the code, there
is no reset routine for the chip. On boards where the chip is
supplied by a fixed regulator, it might not even be resetted
during (e.g. watchdog) reboot and can be in any state.
If the device is probed with VAG enabled, the driver's probe
routine will generate a loud pop sound when ANA_POWER is
being programmed. Avoid this by properly disabling just the
VAG bit and waiting the required power down time.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Fabio Estevam <festivem@gmail.com>
Link: https://lore.kernel.org/r/20200414181140.145825-1-sebastian.reichel@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3677fc3d68dd942c92de52f0bd9dd8b472a40e6 ]
Function pcm_new_ver can fail, so we should check it's return value and
handle possible error.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200327204729.397-6-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ebf1474745b4373fdde0fcf32d9d1f369b50b212 upstream.
snd_soc_dapm_kcontrol widget which is created by autodisable control
should contain correct on_val, mask and shift because it is set when the
widget is powered and changed value is applied on registers by following
code in dapm_seq_run_coalesced().
mask |= w->mask << w->shift;
if (w->power)
value |= w->on_val << w->shift;
else
value |= w->off_val << w->shift;
Shift on the mask in dapm_kcontrol_data_alloc() is removed to prevent
double shift.
And, on_val in dapm_kcontrol_set_value() is modified to get correct
value in the dapm_seq_run_coalesced().
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/000001d61537$b212f620$1638e260$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 81630dc042af998b9f58cd8e2c29dab9777ea176 ]
sst_send_slot_map() uses sst_fill_and_send_cmd_unlocked() because in some
places it is called with the drv->lock mutex already held.
So it must always be called with the mutex locked. This commit adds missing
locking in the sst_set_be_modules() code-path.
Fixes: 24c8d14192cc ("ASoC: Intel: mrfld: add DSP core controls")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200402185359.3424-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3025571edd9df653e1ad649f0638368a39d1bbb5 upstream.
Currently function sst_platform_get_resources always returns zero and
error return codes set by the function are never returned. Fix this
by returning the error return code in variable ret rather than the
hard coded zero.
Addresses-Coverity: ("Unused value")
Fixes: f533a035e4da ("ASoC: Intel: mrfld - create separate module for pci part")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200208220720.36657-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f5e056e1e46fcbb5f74ce560792aeb7d57ce79e6 upstream.
The check on p->sink looks bogus, I believe it should be p->source
since the following code blocks are related to p->source. Fix
this by replacing p->sink with p->source.
Fixes: 24c8d14192cc ("ASoC: Intel: mrfld: add DSP core controls")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Addresses-Coverity: ("Copy-paste error")
Link: https://lore.kernel.org/r/20191119113640.166940-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit abca9e4a04fbe9c6df4d48ca7517e1611812af25 upstream.
Current topology doesn't add prefix of component to new kcontrol.
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/009b01d60804$ae25c2d0$0a714870$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 21fca8bdbb64df1297e8c65a746c4c9f4a689751 upstream.
soc_compr_trigger_fe() allows start or stop after pause_push.
In dpcm_be_dai_trigger(), however, only pause_release is allowed
command after pause_push.
So, start or stop after pause in compress offload is always
returned as error if the compress offload is used with dpcm.
To fix the problem, SND_SOC_DPCM_STATE_PAUSED should be allowed
for start or stop command.
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/004d01d607c1$7a3d5250$6eb7f6f0$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3bbbb7728fc853d71dbce4073fef9f281fbfb4dd upstream.
Since a virtual mixer has no backing registers
to decide which path to connect,
it will try to match with initial state.
This is to ensure that the default mixer choice will be
correctly powered up during initialization.
Invert flag is used to select initial state of the virtual switch.
Since actual hardware can't be disconnected by virtual switch,
connected is better choice as initial state in many cases.
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/01a301d60731$b724ea10$256ebe30$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0ab070917afdc93670c2d0ea02ab6defb6246a7c upstream.
If regwshift is 32 and the selected architecture compiles '<<' operator
for signed int literal into rotating shift, '1<<regwshift' became 1 and
it makes regwmask to 0x0.
The literal is set to unsigned long to get intended regwmask.
Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/001001d60665$db7af3e0$9270dba0$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
