106137 Commits

Author SHA1 Message Date
Lucas Stach
8c06a3e020 drm/nouveau: correctly pair hwmon_init and hwmon_fini
I broke this with my commit
07cfe0e7a820ecad078c04e9c2a102521709145d

This fixes fdo #33434

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-02-02 10:17:16 +10:00
Ajit Khaparde
9b6cefd659 be2net: remove netif_stop_queue being called before register_netdev.
It is illegal to call netif_stop_queue before register_netdev.

Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-01 15:41:59 -08:00
Ajit Khaparde
a89e828397 be2net: fix a crash seen during insmod/rmmod test
While running insmod/rmood in a loop, an unnecessary netif_stop_queue
causes the system to crash. Remove the netif_stop_queue call
and netif_start_queue in the link status update path.

Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-01 15:41:13 -08:00
Randy Dunlap
69bc70d4f9 gpu/stub: fix acpi_video build error, fix stub kconfig dependencies
The comments under "config STUB_POULSBO" are close to correct,
but they are not being followed.  This patch updates them to reflect
the requirements for THERMAL.

This build error is caused by STUB_POULSBO selecting ACPI_VIDEO
when ACPI_VIDEO's config requirements are not met.

  ERROR: "thermal_cooling_device_register" [drivers/acpi/video.ko] undefined!
  ERROR: "thermal_cooling_device_unregister" [drivers/acpi/video.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-02 10:18:42 +11:00
Stefan Weil
a29ae23f68 isdn: icn: Fix potentially wrong string handling
This warning was reported by cppcheck:
drivers/isdn/icn/icn.c:1641: error: Dangerous usage of 'rev' (strncpy doesn't always 0-terminate it)

If strncpy copied 20 bytes, the destination string rev was not terminated.
The patch adds one more byte to rev and makes sure that this byte is
always 0.

Cc: Karsten Keil <isdn@linux-pingi.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-01 14:17:51 -08:00
Vladislav Zolotarov
d9c8f498c3 bnx2x: multicasts in NPAR mode
The chip was erroneously configured to accept all multicast frames
in a normal (none-promisc) rx mode both on the RSS and on the FCoE L2 rings
when in an NPAR mode. This caused packet duplication for every received multicast
frame in this mode.

Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-01 14:05:30 -08:00
Chris Wilson
5fe49d86f9 drm/i915: Only bind to function 0 of the PCI device
Early chipsets (gen2/3) used function 1 as a placeholder for multi-head.
We used to ignore these since they were not assigned to
PCI_CLASS_DISPLAY_VGA. However with 934f992c7 we attempt to bind to all
Intel PCI_CLASS_DISPLAY devices (and functions) to work in multi-gpu
systems. This fails hard on gen2/3.

Reported-by: Ferenc Wágner <wferi@niif.hu>
Tested-by: Ferenc Wágner <wferi@niif.hu>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=28012
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
2011-02-01 21:53:59 +00:00
Alan Cox
f97f3057fd depca: Fix warnings
Replace the rather weird use of ++ with + 1 as the value is being assigned

Signed-off-by: Alan Cox <alan@linux.intel.com>
2011-02-01 13:19:07 -08:00
David S. Miller
2ba5e1feaa Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 2011-02-01 13:08:59 -08:00
David S. Miller
62175c75fb Merge branch 'vhost-net' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost 2011-02-01 12:56:11 -08:00
Stefan Weil
48bc9a2cce vxge: Fix wrong boolean operator
This error is reported by cppcheck:
drivers/net/vxge/vxge-config.c:3693: warning: Mutual exclusion over || always evaluates to true. Did you intend to use && instead?

It looks like cppcheck is correct, so fix this. No test was run.

Cc: Ramkrishna Vepa <ramkrishna.vepa@exar.com>
Cc: Sivakumar Subramani <sivakumar.subramani@exar.com>
Cc: Sreenivasa Honnur <sreenivasa.honnur@exar.com>
Cc: Jon Mason <jon.mason@exar.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Acked-by: Ram Vepa <ram.vepa@exar.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-01 12:30:23 -08:00
Mohammed Shafi Shajakhan
479600777b ath9k: Fix memory leak due to failed PAPRD frames
free the skb's when the Tx of PAPRD frames fails and also add a debug
message indicating that.

Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-02-01 11:06:00 -05:00
Michael S. Tsirkin
5e18247b02 vhost: rcu annotation fixup
When built with rcu checks enabled, vhost triggers
bogus warnings as vhost features are read without
dev->mutex sometimes, and private pointer is read
with our kind of rcu where work serves as a
read side critical section.

Fixing it properly is not trivial.
Disable the warnings by stubbing out the checks for now.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-02-01 16:48:46 +02:00
Stefan Weil
fca540ab5f enc28j60: Fix reading of transmit status vector
This error was reported by cppcheck:
drivers/net/enc28j60.c:815: error: Using sizeof for array given as function argument returns the size of pointer.

The original code reads 4 or 8 bytes instead of TSV_SIZE (= 100) bytes.
I just fixed the code, but did not run any tests.

Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31 20:56:54 -08:00
Ken Kawasaki
785e8cc39b axnet_cs: reduce delay time at ei_rx_overrun
axnet_cs:
    mdelay of 10ms is too long at ei_rx_overrun.
    It should be reduced to 2ms.

Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31 20:53:20 -08:00
Linus Torvalds
7921127e29 Merge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: smp_on_up: allow non-ARM SMP processors
  ARM: io: ensure inb/outb() et.al. are properly ordered on ARMv6+
  ARM: initrd: disable initrd if passed address overlaps reserved region
  ARM: footbridge: fix debug macros
  ARM: mmci: round down the bytes transferred on error
  ARM: mmci: complete the transaction on error
  ARM: 6642/1: mmci: calculate remaining bytes at error correctly
2011-02-01 08:30:31 +10:00
Linus Torvalds
cbae48738f Merge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (42 commits)
  usb: gadget: composite: avoid access beyond array max length
  USB: serial: handle Data Carrier Detect changes
  USB: gadget: Fix endpoint representation in ci13xxx_udc
  USB: gadget: Fix error path in ci13xxx_udc gadget probe function
  usb: pch_udc: Fix the worning log issue at gadget driver remove
  USB: serial: Updated support for ICOM devices
  USB: ehci-mxc: add work-around for efika mx/sb bug
  USB: unbreak ehci-mxc on otg port of i.MX27
  drivers: update to pl2303 usb-serial to support Motorola cables
  USB: adding USB support for Cinterion's HC2x, EU3 and PH8 products
  USB serial: add missing .usb_driver field in serial drivers
  USB: ehci-fsl: Fix 'have_sysif_regs' detection
  USB: g_printer: fix bug in module parameter definitions
  USB: g_printer: fix bug in unregistration
  USB: uss720: remove duplicate USB device
  MAINTAINERS: add ueagle-atm entry
  USB: EHCI: fix DMA deallocation bug
  USB: pch_udc: support new device ML7213 IOH
  usb: pch_udc: Fixed issue which does not work with g_serial
  usb: set ep_dev async suspend should be later than device_initialize
  ...
2011-02-01 08:07:40 +10:00
Linus Torvalds
fb1c6348b2 Merge branch 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6
* 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (26 commits)
  staging: r8712u: Add new device IDs
  staging: brcm80211: fix suspend/resume issue in brcmsmac
  staging: brcm80211: remove assert to avoid panic since 2.6.37 kernel
  Staging: iio: Aditional fixpoint formatted output bugfix
  staging: usbip: vhci: use urb->dev->portnum to find port
  staging: usbip: vhci: handle EAGAIN from SO_RCVTIMEO
  staging: usbip: vhci: friendly log messages for connection errors
  staging: usbip: vhci: refuse to enqueue for dead connections
  staging: usbip: vhci: give back URBs from in-flight unlink requests
  staging: usbip: vhci: update reference count for usb_device
  staging: usbip: stub: update refcounts for devices and interfaces
  staging: tidspbridge: replace mbox callback with notifier_call
  staging: comedi: ni_labpc: Use shared IRQ for PCMCIA card
  Staging: speakup: &&/|| confusion in silent_store()
  iio: Fixpoint formatted output bugfix
  staging: rt2860: Fix incorrect netif_stop_queue usage warning
  staging: r8712u: Fix memory leak in firmware loading
  staging: tidspbridge: configure full L1 MMU range
  staging: rt2870sta: Add ID for Linksys WUSB100v2
  Staging: xgfib: put parenthesis in the right place
  ...
2011-02-01 08:06:31 +10:00
Linus Torvalds
abfa44b5fd Merge branch 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6
* 'tty-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  tty/serial: fix apbuart build
  n_hdlc: fix read and write locking
  serial: unbreak billionton CF card
  tty: use for_each_console() and WARN() on sysfs failures
  vt: fix issue when fbcon wants to takeover a second time.

Fix up trivial conflict in drivers/tty/tty_io.c
2011-02-01 08:05:19 +10:00
Chuck Ebbert
cc09b5f646 CAN: softing driver depends on IOMEM
Without this dependency the softing driver will be buildable on s390,
where it fails.

Signed-Off-By: Chuck Ebbert <cebbert@redhat.com>
Acked-by: Kurt Van Dijck <kurt.van.dijck@eia.be>

Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-31 13:20:21 -08:00
Mathias Krause
9b00b4157f wl12xx: fix use after free
When DEBUG_SPI is included in the debug log level wl1271_spi_reset()
will dump the already freed memory instead of the SPI buffer.

This bug was spotted by the semantic patch tool coccinelle using the
script found at scripts/coccinelle/free/kfree.cocci.

More information about semantic patching is available at
http://coccinelle.lip6.fr/

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-31 14:48:15 -05:00
Russell King
bed3c1de66 [media] fix saa7111 non-detection
One saa7111 device is reporting a different ID:

saa7115 0-0024: chip found @ 0x48 (ID 0f7111d0e111111) does not match a known saa711x chip.

As this is for sure a saa7111, change the detection code to also
cover this device.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 14:19:50 -02:00
Jarod Wilson
56b0ec30c4 [media] rc/streamzap: fix reporting response times
The streamzap driver has relatively low sampling resolution, and any
delays in reporting events seem to cause some minor problems for the
likes of irw when using the lirc bridge driver, resulting in a single
keypress registering as multiple independent ones, rather than as a
single press with repeats. If we call ir_raw_event_handle() more
frequently and reset the rawir kfifo at end-of-signal, the behavior
improves quite a bit.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:22:13 -02:00
Jarod Wilson
5bd9d73c84 [media] mceusb: really fix remaining keybounce issues
Make sure rawir struct is zeroed out before populating it for each
ir_raw_event_store_with_filter() call, and when we see a trailing 0x80
packet (end-of-data), issue an ir_raw_event_reset() call.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:20:35 -02:00
Jarod Wilson
b4608faee0 [media] rc: use time unit conversion macros correctly
Due to my own stupidity, some of the wrong time unit conversion macros
were being used inside some of the IR drivers I've been working on. Fix
that, and convert over some additional places to also use the macros.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:20:11 -02:00
Jarod Wilson
457e2ffcef [media] rc/ir-lirc-codec: add back debug spew
Some occasionally useful debug spew disappeared as part of a feature
update a while back, and I'm finding myself in need of it again to help
diagnose some issues.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:19:42 -02:00
Jarod Wilson
8df59918b5 [media] ir-kbd-i2c: improve remote behavior with z8 behind usb
Add the same "are you ready?" i2c_master_send() poll command to
get_key_haup_xvr found in lirc_zilog, which is apparently seen in
the Windows driver for the PVR-150 w/a z8. This stabilizes what is
received from both the HD-PVR and HVR-1950, even with their polling
intervals at the default of 100, thus the removal of the custom
260ms polling_interval in pvrusb2-i2c-core.c.

Acked-by: Andy Walls <awalls@md.metrocast.net>
Acked-by: Mike Isely <isely@isely.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:19:15 -02:00
Jarod Wilson
5766d204ae [media] lirc_zilog: z8 on usb doesn't like back-to-back i2c_master_send
Both the HD-PVR and HVR-1950, driven by the hdpvr and pvrusb2 drivers
respectively, have a zilog z8 chip exposed via i2c. These are both
usb-connected devices, and on both of them, back-to-back i2c_master_send
calls that work fine with a z8 on a pci card fail with a -EIO, as the
chip isn't yet ready from the prior command. To cope with that, add a
delay and retry loop where necessary.

Acked-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:18:42 -02:00
Jarod Wilson
7f2a06deaa [media] hdpvr: fix up i2c device registration
We have to actually call i2c_new_device() once for each of the rx and tx
addresses. Also improve error-handling and device remove i2c cleanup.

Reviewed-by: Andy Walls <awalls@md.metrocast.net>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:18:04 -02:00
Jarod Wilson
86ee659488 [media] rc/mce: add mappings for missing keys
Per http://mediacenterguides.com/book/export/html/31 and investigation
by Erin, we were missing these last three mappings to complete the mce
key table. Lets remedy that.

Reported-by: Erin Simonds <fisslefink@gmail.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:16:52 -02:00
Jean-François Moine
a5ecdfb3da [media] gspca - zc3xx: Discard the partial frames
In some cases, some frames may not end with the JPEG end of frame.
Being not complete, they are now discarded.

Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:05:48 -02:00
Jean-François Moine
3d244065cb [media] gspca - zc3xx: Fix bad images with the sensor hv7131r
The problem was introduced by the commit 2af0b4c60cc0daf0.
Some registers were no more initialized.

Tested-by: <Giovanni Scafora giovanni@archlinux.org>
Tested-by: <Sergey Manucharian sm@ingeniware.com>
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:05:26 -02:00
Jean-François Moine
7c45f2c7fe [media] gspca - zc3xx: Bad delay when given by a table
Signed-off-by: Jean-François Moine <moinejf@free.fr>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31 12:04:25 -02:00
Chris Wilson
78c6e170ba drm/i915: Suppress spurious vblank interrupts
Hugh Dickins found that characters in xterm were going missing and oft
delayed. Being the curious type, he managed to associate this with the
new high-precision vblank patches; disabling these he found, restored
the orderliness of his characters.

The oddness begins when one realised that Hugh was not using vblanks at
all on his system (fvwm and some xterms). Instead, all he had to go on
were warning of a pipe underrun, curiously enough at around 60Hz. He
poked and found that in addition to the underrun warning, the hardware
was flagging the start of a new frame, a vblank, which in turn was
kicking off the pending vblank processing code.

There is little we can do for the underruns on Hugh's machine, a
Crestline [965GM], which must have its FIFO watermarks set to 8.
However, we do not need to process the vblank if we know that they are
disabled...

Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-31 12:38:47 +00:00
Chris Wilson
021a8455be drm: Avoid leak of adjusted mode along quick set_mode paths
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-31 12:37:41 +00:00
Chris Wilson
ede3ff5204 drm: Simplify and defend later checks when disabling a crtc
By setting the FB of a CRTC to NULL, we are turning off the CRTC (and so
disable the unused encoders and connectors). As such we can simplify the
later tests by making sure the set->mode is NULL. Setting the
num_connectors to zero means that we do not need to loop over the unused
connectors.

All current usage appears correct, this only builds additional defense
into the routine.

References: https://bugzilla.kernel.org/show_bug.cgi?id=27722
Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-31 12:36:33 +00:00
Chris Wilson
9334ef755f drm: Don't switch fb when disabling an output
In drm_crtc_helper_set_config, we call drm_crtc_helper_set_mode which
may return early and do no operation if the crtc is to be disabled. In
this case we merrily swap to the new fb, discarding the old_fb believing
that it has been cleaned up. However, due to the early return, the
old_fb was not presented to the backend for correct reaping, and nor was
the new one - which is about to be reaped via the
drm_helper_disable_unused_functions(), leading to incorrect refcounting
of the pinned objects.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=27722
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29857
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29230
Tested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2011-01-31 12:35:51 +00:00
Russell King
613b152c63 ARM: mmci: round down the bytes transferred on error
We should not report incomplete blocks on error.  Return the number of
bytes successfully transferred, rounded down to the nearest block.

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-31 10:53:37 +00:00
Russell King
ccff9b5182 ARM: mmci: complete the transaction on error
When we encounter an error, make sure we complete the transaction
otherwise we'll leave the request dangling.

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-31 10:53:23 +00:00
Jan Glauber
6fa1098ac1 [S390] qdio: prevent compile warning under CONFIG_32BIT
Prevent the following compiler warning if compiling a 31 bit kernel:

drivers/s390/cio/qdio_main.c: In function ‘get_outbound_buffer_frontier’:
drivers/s390/cio/qdio_main.c:646:16: warning: ‘state’ may be used uninitialized in this function
  CC      lib/radix-tree.o
  CC      drivers/s390/scsi/zfcp_cfdc.o
drivers/s390/cio/qdio_main.c: In function ‘qdio_inbound_q_moved’:
drivers/s390/cio/qdio_main.c:479:16: warning: ‘state’ may be used uninitialized in this function
drivers/s390/cio/qdio_main.c:479:16: note: ‘state’ was declared here

Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-31 11:30:21 +01:00
Stefan Haberland
f602f6d694 [S390] dasd: prevent panic with unresumed devices
If a device is not resumed correctly the system crashes when this
device is set offline. This may happen if it gets disconnected
during suspend.
Check if the device is already removed from alias handling and skip
these steps to prevent the kernel panic.

Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-01-31 11:30:20 +01:00
Yaniv Rosner
c4c9310674 bnx2x: Update bnx2x version to 1.62.00-5
Update bnx2x version to 1.62.00-5

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30 22:26:17 -08:00
Yaniv Rosner
5866df6d07 bnx2x: Fix potential link loss in multi-function mode
All functions on a port should be set to take the MDC/MDIO lock to avoid contention on the bus

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30 22:26:16 -08:00
Yaniv Rosner
c8e64df48a bnx2x: Fix port swap for BCM8073
Fix link on BCM57712 + BCM8073 when port swap is enabled. Common PHY reset was done on the wrong port.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30 22:26:16 -08:00
Yaniv Rosner
53eda06def bnx2x: Fix LED blink rate on BCM84823
Fix blink rate of activity LED of the BCM84823 on 10G link

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30 22:26:15 -08:00
Yaniv Rosner
81a3516c4c bnx2x: Remove setting XAUI low-power for BCM8073
A rare link issue with the BCM8073 PHY may occur due to setting XAUI low power mode, while the PHY microcode already does that.
The fix is not to set set XAUI low power mode for this PHY.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-01-30 22:26:15 -08:00
Linus Torvalds
70d1f36556 Merge branch 'for-linus' of git://git.infradead.org/ubi-2.6
* 'for-linus' of git://git.infradead.org/ubi-2.6:
  Revert "UBI: use mtd->writebufsize to set minimal I/O unit size"
2011-01-31 13:04:51 +10:00
Dmitry Torokhov
54e74b87e2 Input: rc-keymap - return KEY_RESERVED for unknown mappings
Do not respond with -EINVAL to EVIOCGKEYCODE for not-yet-mapped
scancodes, but rather return KEY_RESERVED.

This fixes breakage with Ubuntu's input-kbd utility that stopped
returning full keymaps for remote controls.

Tested-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Tested-by: Mark Lord <kernel@teksavvy.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-31 13:04:11 +10:00
Linus Torvalds
1ca05b7fc2 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics - retry failed resets when reconnecting
  Input: synaptics - fix reconnect logic on MT devices
  Input: tegra-kbc - fix keymap entry for LeftMeta key
  Input: tegra-kbc - fix build error
2011-01-31 13:02:34 +10:00
Huang Weiyi
2f215a7d6d intel_scu_ipc: remove duplicated #include
Remove duplicated #include('s) in
  drivers/platform/x86/intel_scu_ipc.c

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-31 12:59:34 +10:00