commit 58bfe2ccec5f9f137b41dd38f335290dcc13cd5c upstream.
A user reported some issues with smaller file systems that get very
full. While investigating this issue I noticed that df wasn't showing
100% full, despite having 0 chunk space and having < 1MiB of available
metadata space.
This turns out to be an overflow issue, we're doing:
total_available_metadata_space - SZ_4M < global_block_rsv_size
to determine if there's not enough space to make metadata allocations,
which overflows if total_available_metadata_space is < 4M. Fix this by
checking to see if our available space is greater than the 4M threshold.
This makes df properly report 100% usage on the file system.
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3914784553f68c931fc666dbe7e86fe881aada38 upstream.
We have to unregister tco_pdev also if i2c_add_adapter() fails.
Fixes: 9424693035a5 ("i2c: i801: Create iTCO device on newer Intel PCHs")
Cc: stable@vger.kernel.org
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ef600923521616ebe192c893468ad0424de2afb upstream.
For REPORT SUPPORTED OPERATION CODES command, the service action field is
defined as bits 0-4 in the second byte in the CDB. Bits 5-7 in the second
byte are reserved.
Only look at the service action field in the second byte when determining
if the MAINTENANCE IN opcode is a REPORT SUPPORTED OPERATION CODES command.
This matches how we only look at the service action field in the second
byte when determining if the SERVICE ACTION IN(16) opcode is a READ
CAPACITY(16) command (reserved bits 5-7 in the second byte are ignored).
Fixes: 7b2030942859 ("libata: Add support for SCT Write Same")
Cc: stable@vger.kernel.org
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7ee29facd8a9c5a26079148e36bcf07141b3a6bc upstream.
In nilfs_gccache_submit_read_data(), brelse(bh) is called to drop the
reference count of bh when the call to nilfs_dat_translate() fails. If
the reference count hits 0 and its owner page gets unlocked, bh may be
freed. However, bh->b_page is dereferenced to put the page after that,
which may result in a use-after-free bug. This patch moves the release
operation after unlocking and putting the page.
NOTE: The function in question is only called in GC, and in combination
with current userland tools, address translation using DAT does not occur
in that function, so the code path that causes this issue will not be
executed. However, it is possible to run that code path by intentionally
modifying the userland GC library or by calling the GC ioctl directly.
[konishi.ryusuke@gmail.com: NOTE added to the commit log]
Link: https://lkml.kernel.org/r/1543201709-53191-1-git-send-email-bianpan2016@163.com
Link: https://lkml.kernel.org/r/20230921141731.10073-1-konishi.ryusuke@gmail.com
Fixes: a3d93f709e89 ("nilfs2: block cache for garbage collection")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reported-by: Ferry Meng <mengferry@linux.alibaba.com>
Closes: https://lkml.kernel.org/r/20230818092022.111054-1-mengferry@linux.alibaba.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cce7fc8b29961b64fadb1ce398dc5ff32a79643b upstream.
In case the leaf driver wants to use IRQ polling (irq = 0) and
IIR register shows that an interrupt happened in the 8250 hardware
the IRQ data can be NULL. In such a case we need to skip the wake
event as we came to this path from the timer interrupt and quite
likely system is already awake.
Without this fix we have got an Oops:
serial8250: ttyS0 at I/O 0x3f8 (irq = 0, base_baud = 115200) is a 16550A
...
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:serial8250_handle_irq+0x7c/0x240
Call Trace:
? serial8250_handle_irq+0x7c/0x240
? __pfx_serial8250_timeout+0x10/0x10
Fixes: 0ba9e3a13c6a ("serial: 8250: Add missing wakeup event reporting")
Cc: stable <stable@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230831222555.614426-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef9b7bf52c2f47f0a9bf988543c577b92c92d15e upstream.
Daniel reported that the commit 1ae3e78c0820 ("watchdog: iTCO_wdt: No
need to stop the timer in probe") makes QEMU implementation of the iTCO
watchdog not to trigger reboot anymore when NO_REBOOT flag is initially
cleared using this option (in QEMU command line):
-global ICH9-LPC.noreboot=false
The problem with the commit is that it left the unconditional setting of
NO_REBOOT that is not cleared anymore when the kernel keeps pinging the
watchdog (as opposed to the previous code that called iTCO_wdt_stop()
that cleared it).
Fix this so that we only set NO_REBOOT if the watchdog was not initially
running.
Fixes: 1ae3e78c0820 ("watchdog: iTCO_wdt: No need to stop the timer in probe")
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221028062750.45451-1-mika.westerberg@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1ae3e78c08209ac657c59f6f7ea21bbbd7f6a1d4 upstream.
The watchdog core can handle pinging of the watchdog before userspace
opens the device. For this reason instead of stopping the timer, just
mark it as running and let the watchdog core take care of it.
Cc: Malin Jonsson <malin.jonsson@ericsson.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210921102900.61586-1-mika.westerberg@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 737dd811a3dbfd7edd4ad2ba5152e93d99074f83 ]
When a CRC error occurs, the HBA asserts an interrupt to indicate an
interface fatal error (PxIS.IFS). The ISR clears PxIE and PxIS, then
does error recovery. If the adapter receives another SDB FIS
with an error (PxIS.TFES) from the device before the start of the EH
recovery process, the interrupt signaling the new SDB cannot be
serviced as PxIE was cleared already. This in turn results in the HBA
inability to issue any command during the error recovery process after
setting PxCMD.ST to 1 because PxIS.TFES is still set.
According to AHCI 1.3.1 specifications section 6.2.2, fatal errors
notified by setting PxIS.HBFS, PxIS.HBDS, PxIS.IFS or PxIS.TFES will
cause the HBA to enter the ERR:Fatal state. In this state, the HBA
shall not issue any new commands.
To avoid this situation, introduce the function
ahci_port_clear_pending_irq() to clear pending interrupts before
executing a COMRESET. This follows the AHCI 1.3.1 - section 6.2.2.2
specification.
Signed-off-by: Szuying Chen <Chloe_Chen@asmedia.com.tw>
Fixes: e0bfd149973d ("[PATCH] ahci: stop engine during hard reset")
Cc: stable@vger.kernel.org
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 93c7711494f47f9c829321e2a8711671b02f6e4c ]
Drop pointless VPRINTK() calls for entering and existing interrupt
routines and convert the remaining calls to dev_dbg().
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Stable-dep-of: 737dd811a3db ("ata: libahci: clear pending interrupt status")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f75f71b2c418a27a7c05139bb27a0c83adf88d19 ]
Fix linker error if FB=m about missing fb_io_read and fb_io_write. The
linker's error message suggests that this config setting has already
been broken for other symbols.
All errors (new ones prefixed by >>):
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o: in function `sh7760fb_probe':
sh7760fb.c:(.text+0x374): undefined reference to `framebuffer_alloc'
sh4-linux-ld: sh7760fb.c:(.text+0x394): undefined reference to `fb_videomode_to_var'
sh4-linux-ld: sh7760fb.c:(.text+0x39c): undefined reference to `fb_alloc_cmap'
sh4-linux-ld: sh7760fb.c:(.text+0x3a4): undefined reference to `register_framebuffer'
sh4-linux-ld: sh7760fb.c:(.text+0x3ac): undefined reference to `fb_dealloc_cmap'
sh4-linux-ld: sh7760fb.c:(.text+0x434): undefined reference to `framebuffer_release'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o: in function `sh7760fb_remove':
sh7760fb.c:(.text+0x800): undefined reference to `unregister_framebuffer'
sh4-linux-ld: sh7760fb.c:(.text+0x804): undefined reference to `fb_dealloc_cmap'
sh4-linux-ld: sh7760fb.c:(.text+0x814): undefined reference to `framebuffer_release'
>> sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0xc): undefined reference to `fb_io_read'
>> sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x10): undefined reference to `fb_io_write'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x2c): undefined reference to `cfb_fillrect'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x30): undefined reference to `cfb_copyarea'
sh4-linux-ld: drivers/video/fbdev/sh7760fb.o:(.rodata+0x34): undefined reference to `cfb_imageblit'
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309130632.LS04CPWu-lkp@intel.com/
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230918090400.13264-1-tzimmermann@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80cc944eca4f0baa9c381d0706f3160e491437f2 ]
ata_scsi_port_error_handler() starts off by clearing ATA_PFLAG_EH_PENDING,
before calling ap->ops->error_handler() (without holding the ap->lock).
If an error IRQ is received while ap->ops->error_handler() is running,
the irq handler will set ATA_PFLAG_EH_PENDING.
Once ap->ops->error_handler() returns, ata_scsi_port_error_handler()
checks if ATA_PFLAG_EH_PENDING is set, and if it is, another iteration
of ATA EH is performed.
The problem is that ATA_PFLAG_EH_PENDING is not only cleared by
ata_scsi_port_error_handler(), it is also cleared by ata_eh_reset().
ata_eh_reset() is called by ap->ops->error_handler(). This additional
clearing done by ata_eh_reset() breaks the whole retry logic in
ata_scsi_port_error_handler(). Thus, if an error IRQ is received while
ap->ops->error_handler() is running, the port will currently remain
frozen and will never get re-enabled.
The additional clearing in ata_eh_reset() was introduced in commit
1e641060c4b5 ("libata: clear eh_info on reset completion").
Looking at the original error report:
https://marc.info/?l=linux-ide&m=124765325828495&w=2
We can see the following happening:
[ 1.074659] ata3: XXX port freeze
[ 1.074700] ata3: XXX hardresetting link, stopping engine
[ 1.074746] ata3: XXX flipping SControl
[ 1.411471] ata3: XXX irq_stat=400040 CONN|PHY
[ 1.411475] ata3: XXX port freeze
[ 1.420049] ata3: XXX starting engine
[ 1.420096] ata3: XXX rc=0, class=1
[ 1.420142] ata3: XXX clearing IRQs for thawing
[ 1.420188] ata3: XXX port thawed
[ 1.420234] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
We are not supposed to be able to receive an error IRQ while the port is
frozen (PxIE is set to 0, i.e. all IRQs for the port are disabled).
AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) states:
"Each bit location can be thought of as reporting a '1' if the virtual
"interrupt line" for that port is indicating it wishes to generate an
interrupt. That is, if a port has one or more interrupt status bit set,
and the enables for those status bits are set, then this bit shall be set."
Additionally, AHCI state P:ComInit clearly shows that the state machine
will only jump to P:ComInitSetIS (which sets IS.IPS(x) to '1'), if PxIE.PCE
is set to '1'. In our case, PxIE is set to 0, so IS.IPS(x) won't get set.
So IS.IPS(x) only gets set if PxIS and PxIE is set.
AHCI 1.3.1 section 10.7.1.1 First Tier (IS Register) also states:
"The bits in this register are read/write clear. It is set by the level of
the virtual interrupt line being a set, and cleared by a write of '1' from
the software."
So if IS.IPS(x) is set, you need to explicitly clear it by writing a 1 to
IS.IPS(x) for that port.
Since PxIE is cleared, the only way to get an interrupt while the port is
frozen, is if IS.IPS(x) is set, and the only way IS.IPS(x) can be set when
the port is frozen, is if it was set before the port was frozen.
However, since commit 737dd811a3db ("ata: libahci: clear pending interrupt
status"), we clear both PxIS and IS.IPS(x) after freezing the port, but
before the COMRESET, so the problem that commit 1e641060c4b5 ("libata:
clear eh_info on reset completion") fixed can no longer happen.
Thus, revert commit 1e641060c4b5 ("libata: clear eh_info on reset
completion"), so that the retry logic in ata_scsi_port_error_handler()
works once again. (The retry logic is still needed, since we can still
get an error IRQ _after_ the port has been thawed, but before
ata_scsi_port_error_handler() takes the ap->lock in order to check
if ATA_PFLAG_EH_PENDING is set.)
Signed-off-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6bd2c92488c30ef53b5bd80c52f0a7eee9d545a ]
When user resize all trace ring buffer through file 'buffer_size_kb',
then in ring_buffer_resize(), kernel allocates buffer pages for each
cpu in a loop.
If the kernel preemption model is PREEMPT_NONE and there are many cpus
and there are many buffer pages to be allocated, it may not give up cpu
for a long time and finally cause a softlockup.
To avoid it, call cond_resched() after each cpu buffer allocation.
Link: https://lore.kernel.org/linux-trace-kernel/20230906081930.3939106-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4e4ada586995b17f828c6d147d1800eb1471450 ]
Function instance_set() expects to enable event 'sched_switch', so we
should set 1 to its 'enable' file.
Testcase passed after this patch:
# ./ftracetest test.d/instances/instance-event.tc
=== Ftrace unit tests ===
[1] Test creation and deletion of trace instances while setting an event
[PASS]
# of passed: 1
# of failed: 0
# of unresolved: 0
# of untested: 0
# of unsupported: 0
# of xfailed: 0
# of undefined(test bug): 0
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb3255ee8f6f4691471a28fbf22db5e8901116cd ]
Fix this makecheck warning:
drivers/parisc/sba_iommu.c:98:19: warning: symbol 'sba_list'
was not declared. Should it be static?
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f54d02c8f2cc4b46ba2a3bd8252a6750453b6f2b ]
Add function prototype for gunzip() to the boot library code and make
exit() and zalloc() static.
arch/xtensa/boot/lib/zmem.c:8:6: warning: no previous prototype for 'exit' [-Wmissing-prototypes]
8 | void exit (void)
arch/xtensa/boot/lib/zmem.c:13:7: warning: no previous prototype for 'zalloc' [-Wmissing-prototypes]
13 | void *zalloc(unsigned size)
arch/xtensa/boot/lib/zmem.c:35:6: warning: no previous prototype for 'gunzip' [-Wmissing-prototypes]
35 | void gunzip (void *dst, int dstlen, unsigned char *src, int *lenp)
Fixes: 4bedea945451 ("xtensa: Architecture support for Tensilica Xtensa Part 2")
Fixes: e7d163f76665 ("xtensa: Removed local copy of zlib and fixed O= support")
Suggested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54d3d7d363823782c3444ddc41bb8cf1edc80514 ]
Drop the -I<include-dir> options to prevent build warnings since there
is not boot/include directory:
cc1: warning: arch/xtensa/boot/include: No such file or directory [-Wmissing-include-dirs]
Fixes: 437374e9a950 ("restore arch/{ppc/xtensa}/boot cflags")
Fixes: 4bedea945451 ("xtensa: Architecture support for Tensilica Xtensa Part 2")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Message-Id: <20230920052139.10570-15-rdunlap@infradead.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a47b44fbb13f5e7a981b4515dcddc93a321ae89c ]
tegra-bpmp clocks driver makes implicit conversion of signed error
code to unsigned value in recalc_rate operation. The behavior for
recalc_rate, according to it's specification, should be that "If the
driver cannot figure out a rate for this clock, it must return 0."
Fixes: ca6f2796eef7 ("clk: tegra: Add BPMP clock driver")
Signed-off-by: Timo Alho <talho@nvidia.com>
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Link: https://lore.kernel.org/r/20230912112951.2330497-1-cyndis@kapsi.fi
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c0195fa9a9e263df204963f88a22b21688ffb66 ]
devm_kstrdup() returns pointer to allocated string on success,
NULL on failure. So it is better to check the return value of it.
Fixes: e35478eac030 ("i2c: mux: demux-pinctrl: run properly with multiple instances")
Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b547b5e52a0587e6b25ea520bf2f9e03d00cbcb6 ]
If an error occurs after a successful irq_domain_add_linear() call, it
should be undone by a corresponding irq_domain_remove(), as already done
in the remove function.
Fixes: c6ce2b6bffe5 ("gpio: add TB10x GPIO driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 492032760127251e5540a5716a70996bacf2a3fd ]
Get a null-ptr-deref bug as follows with reproducer [1].
BUG: kernel NULL pointer dereference, address: 0000000000000228
...
RIP: 0010:vlan_dev_hard_header+0x35/0x140 [8021q]
...
Call Trace:
<TASK>
? __die+0x24/0x70
? page_fault_oops+0x82/0x150
? exc_page_fault+0x69/0x150
? asm_exc_page_fault+0x26/0x30
? vlan_dev_hard_header+0x35/0x140 [8021q]
? vlan_dev_hard_header+0x8e/0x140 [8021q]
neigh_connected_output+0xb2/0x100
ip6_finish_output2+0x1cb/0x520
? nf_hook_slow+0x43/0xc0
? ip6_mtu+0x46/0x80
ip6_finish_output+0x2a/0xb0
mld_sendpack+0x18f/0x250
mld_ifc_work+0x39/0x160
process_one_work+0x1e6/0x3f0
worker_thread+0x4d/0x2f0
? __pfx_worker_thread+0x10/0x10
kthread+0xe5/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
[1]
$ teamd -t team0 -d -c '{"runner": {"name": "loadbalance"}}'
$ ip link add name t-dummy type dummy
$ ip link add link t-dummy name t-dummy.100 type vlan id 100
$ ip link add name t-nlmon type nlmon
$ ip link set t-nlmon master team0
$ ip link set t-nlmon nomaster
$ ip link set t-dummy up
$ ip link set team0 up
$ ip link set t-dummy.100 down
$ ip link set t-dummy.100 master team0
When enslave a vlan device to team device and team device type is changed
from non-ether to ether, header_ops of team device is changed to
vlan_header_ops. That is incorrect and will trigger null-ptr-deref
for vlan->real_dev in vlan_dev_hard_header() because team device is not
a vlan device.
Cache eth_header_ops in team_setup(), then assign cached header_ops to
header_ops of team net device when its type is changed from non-ether
to ether to fix the bug.
Fixes: 1d76efe1577b ("team: add support for non-ethernet devices")
Suggested-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230918123011.1884401-1-william.xuanziyang@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ff3ba4db5943cac1045e3e4a3c0463ea10f6930 ]
Valid domain value is in range 1 to HV_PERF_DOMAIN_MAX. Current code has
check for domain value greater than or equal to HV_PERF_DOMAIN_MAX. But
the check for domain value 0 is missing.
Fix this issue by adding check for domain value 0.
Before:
# ./perf stat -v -e hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ sleep 1
Using CPUID 00800200
Control descriptor is not initialized
Error:
The sys_perf_event_open() syscall returned with 5 (Input/output error) for
event (hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/).
/bin/dmesg | grep -i perf may provide additional information.
Result from dmesg:
[ 37.819387] hv-24x7: hcall failed: [0 0x60040000 0x100 0] => ret
0xfffffffffffffffc (-4) detail=0x2000000 failing ix=0
After:
# ./perf stat -v -e hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ sleep 1
Using CPUID 00800200
Control descriptor is not initialized
Warning:
hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/ event is not supported by the kernel.
failed to read counter hv_24x7/CPM_ADJUNCT_INST,domain=0,core=1/
Fixes: ebd4a5a3ebd9 ("powerpc/perf/hv-24x7: Minor improvements")
Reported-by: Krishan Gopal Sarawast <krishang@linux.vnet.ibm.com>
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230825055601.360083-1-kjain@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0113d9c9d1ccc07f5a3710dac4aa24b6d711278c ]
Currently, we assume the skb is associated with a device before calling
__ip_options_compile, which is not always the case if it is re-routed by
ipvs.
When skb->dev is NULL, dev_net(skb->dev) will become null-dereference.
This patch adds a check for the edge case and switch to use the net_device
from the rtable when skb->dev is NULL.
Fixes: ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure")
Suggested-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Kyle Zeng <zengyhkyle@gmail.com>
Cc: Stephen Suryaputra <ssuryaextr@gmail.com>
Cc: Vadim Fedorenko <vfedorenko@novek.ru>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd7d7ee3ba2a70d12d02defb478790cf57d5b87b ]
With IPv6, connect() can occasionally return EINVAL if a route is
unavailable. If this happens during I/O to a data server, we want to
report it using LAYOUTERROR as an inability to connect.
Fixes: dd52128afdde ("NFSv4.1/pnfs Ensure flexfiles reports all connection related errors")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
-----BEGIN PGP SIGNATURE-----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=RCAu
-----END PGP SIGNATURE-----
Merge 4.14.326 into android-4.14-stable
Changes in 4.14.326
ARM: pxa: remove use of symbol_get()
mmc: au1xmmc: force non-modular build and remove symbol_get usage
rtc: ds1685: use EXPORT_SYMBOL_GPL for ds1685_rtc_poweroff
modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules
USB: serial: option: add Quectel EM05G variant (0x030e)
USB: serial: option: add FOXCONN T99W368/T99W373 product
HID: wacom: remove the battery when the EKR is off
Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition
serial: sc16is7xx: fix bug when first setting GPIO direction
nilfs2: fix general protection fault in nilfs_lookup_dirty_data_buffers()
nilfs2: fix WARNING in mark_buffer_dirty due to discarded buffer reuse
pinctrl: amd: Don't show `Invalid config param` errors
lib/ubsan: remove returns-nonnull-attribute checks
9p: virtio: make sure 'offs' is initialized in zc_request
ASoC: da7219: Flush pending AAD IRQ when suspending
ethernet: atheros: fix return value check in atl1c_tso_csum()
m68k: Fix invalid .section syntax
s390/dasd: use correct number of retries for ERP requests
fs/nls: make load_nls() take a const parameter
ASoc: codecs: ES8316: Fix DMIC config
security: keys: perform capable check only on privileged operations
net: usb: qmi_wwan: add Quectel EM05GV2
idmaengine: make FSL_EDMA and INTEL_IDMA64 depends on HAS_IOMEM
scsi: qedi: Fix potential deadlock on &qedi_percpu->p_work_lock
netlabel: fix shift wrapping bug in netlbl_catmap_setlong()
bnx2x: fix page fault following EEH recovery
sctp: handle invalid error codes without calling BUG()
cifs: add a warning when the in-flight count goes negative
ALSA: seq: oss: Fix racy open/close of MIDI devices
powerpc/32: Include .branch_lt in data section
powerpc/32s: Fix assembler warning about r0
udf: Check consistency of Space Bitmap Descriptor
udf: Handle error when adding extent to a file
Revert "net: macsec: preserve ingress frame ordering"
reiserfs: Check the return value from __getblk()
fs: Fix error checking for d_hash_and_lookup()
cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit()
regmap: rbtree: Use alloc_flags for memory allocations
spi: tegra20-sflash: fix to check return value of platform_get_irq() in tegra_sflash_probe()
can: gs_usb: gs_usb_receive_bulk_callback(): count RX overflow errors also in case of OOM
wifi: mwifiex: Fix OOB and integer underflow when rx packets
Bluetooth: nokia: fix value check in nokia_bluetooth_serdev_probe()
net: tcp: fix unexcepted socket die when snd_wnd is 0
crypto: caam - fix unchecked return value error
lwt: Check LWTUNNEL_XMIT_CONTINUE strictly
fs: ocfs2: namei: check return value of ocfs2_add_entry()
wifi: mwifiex: fix memory leak in mwifiex_histogram_read()
wifi: mwifiex: Fix missed return in oob checks failed path
wifi: ath9k: protect WMI command response buffer replacement with a lock
wifi: mwifiex: avoid possible NULL skb pointer dereference
wifi: ath9k: use IS_ERR() with debugfs_create_dir()
net: arcnet: Do not call kfree_skb() under local_irq_disable()
netrom: Deny concurrent connect().
ARM: dts: BCM53573: Add cells sizes to PCIe node
ARM: dts: samsung: s3c6410-mini6410: correct ethernet reg addresses (split)
ARM: dts: samsung: s5pv210-smdkv210: correct ethernet reg addresses (split)
drm: adv7511: Fix low refresh rate register for ADV7533/5
of: unittest: fix null pointer dereferencing in of_unittest_find_node_by_name()
smackfs: Prevent underflow in smk_set_cipso()
audit: fix possible soft lockup in __audit_inode_child()
ALSA: ac97: Fix possible error value of *rac97
drivers: clk: keystone: Fix parameter judgment in _of_pll_clk_init()
clk: sunxi-ng: Modify mismatched function name
PCI: Mark NVIDIA T4 GPUs to avoid bus reset
PCI: pciehp: Use RMW accessors for changing LNKCTL
wifi: ath10k: Use RMW accessors for changing LNKCTL
nfs/blocklayout: Use the passed in gfp flags
powerpc/iommu: Fix notifiers being shared by PCI and VIO buses
jfs: validate max amount of blocks before allocation.
fs: lockd: avoid possible wrong NULL parameter
NFSD: da_addr_body field missing in some GETDEVICEINFO replies
drivers: usb: smsusb: fix error handling code in smsusb_init_device
media: dib7000p: Fix potential division by zero
media: dvb-usb: m920x: Fix a potential memory leak in m920x_i2c_xfer()
media: cx24120: Add retval check for cx24120_message_send()
media: mediatek: vcodec: Return NULL if no vdec_fb is found
usb: phy: mxs: fix getting wrong state with mxs_phy_is_otg_host()
scsi: iscsi: Add strlen() check in iscsi_if_set{_host}_param()
scsi: be2iscsi: Add length check when parsing nlattrs
scsi: qla4xxx: Add length check when parsing nlattrs
x86/APM: drop the duplicate APM_MINOR_DEV macro
scsi: qedf: Do not touch __user pointer in qedf_dbg_stop_io_on_error_cmd_read() directly
scsi: qedf: Do not touch __user pointer in qedf_dbg_fp_int_cmd_read() directly
dma-buf/sync_file: Fix docs syntax
media: go7007: Remove redundant if statement
USB: gadget: f_mass_storage: Fix unused variable warning
cgroup:namespace: Remove unused cgroup_namespaces_init()
scsi: core: Use 32-bit hostnum in scsi_host_lookup()
scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock
serial: tegra: handle clk prepare error in tegra_uart_hw_init()
amba: bus: fix refcount leak
Revert "IB/isert: Fix incorrect release of isert connection"
HID: multitouch: Correct devm device reference for hidinput input_dev name
rpmsg: glink: Add check for kstrdup
dmaengine: ste_dma40: Add missing IRQ check in d40_probe
igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
netfilter: xt_u32: validate user space input
netfilter: xt_sctp: validate the flag_info count
igb: set max size RX buffer when store bad packet is enabled
PM / devfreq: Fix leak in devfreq_dev_release()
ALSA: pcm: Fix missing fixup call in compat hw_refine ioctl
ARM: OMAP2+: Fix -Warray-bounds warning in _pwrdm_state_switch()
backlight/gpio_backlight: Compare against struct fb_info.device
backlight/bd6107: Compare against struct fb_info.device
backlight/lv5207lp: Compare against struct fb_info.device
media: dvb: symbol fixup for dvb_attach()
ntb: Drop packets when qp link is down
ntb: Clean up tx tail index on link down
ntb: Fix calculation ntb_transport_tx_free_entry()
Revert "PCI: Mark NVIDIA T4 GPUs to avoid bus reset"
procfs: block chmod on /proc/thread-self/comm
parisc: Fix /proc/cpuinfo output for lscpu
dccp: Fix out of bounds access in DCCP error handler
X.509: if signature is unsupported skip validation
net: handle ARPHRD_PPP in dev_is_mac_header_xmit()
pstore/ram: Check start of empty przs during init
crypto: stm32 - fix loop iterating through scatterlist for DMA
scsi: qla2xxx: fix inconsistent TMF timeout
scsi: qla2xxx: Turn off noisy message log
fbdev/ep93xx-fb: Do not assign to struct fb_info.dev
drm/ast: Fix DRAM init on AST2200
parisc: led: Fix LAN receive and transmit LEDs
parisc: led: Reduce CPU overhead for disk & lan LED computation
clk: qcom: gcc-mdm9615: use proper parent for pll0_vote clock
NFSv4/pnfs: minor fix for cleanup path in nfs4_get_device_info
x86/virt: Drop unnecessary check on extended CPUID level in cpu_has_svm()
watchdog: intel-mid_wdt: add MODULE_ALIAS() to allow auto-load
pwm: lpc32xx: Remove handling of PWM channels
net: read sk->sk_family once in sk_mc_loop()
igb: disable virtualization features on 82580
net: ipv6/addrconf: avoid integer underflow in ipv6_create_tempaddr
af_unix: Fix data-races around user->unix_inflight.
af_unix: Fix data-race around unix_tot_inflight.
af_unix: Fix data-races around sk->sk_shutdown.
af_unix: Fix data race around sk->sk_err.
net: sched: sch_qfq: Fix UAF in qfq_dequeue()
kcm: Destroy mutex in kcm_exit_net()
igbvf: Change IGBVF_MIN to allow set rx/tx value between 64 and 80
igb: Change IGB_MIN to allow set rx/tx value between 64 and 80
ata: sata_gemini: Add missing MODULE_DESCRIPTION
ata: pata_ftide010: Add missing MODULE_DESCRIPTION
net: ethernet: mtk_eth_soc: fix possible NULL pointer dereference in mtk_hwlro_get_fdir_all()
kcm: Fix memory leak in error path of kcm_sendmsg()
ixgbe: fix timestamp configuration code
kcm: Fix error handling for SOCK_DGRAM in kcm_sendmsg().
parisc: Drop loops_per_jiffy from per_cpu struct
autofs: fix memory leak of waitqueues in autofs_catatonic_mode
btrfs: output extra debug info if we failed to find an inline backref
ACPICA: Add AML_NO_OPERAND_RESOLVE flag to Timer
ACPI: video: Add backlight=native DMI quirk for Lenovo Ideapad Z470
hw_breakpoint: fix single-stepping when using bpf_overflow_handler
wifi: ath9k: fix printk specifier
wifi: mwifiex: fix fortify warning
crypto: lib/mpi - avoid null pointer deref in mpi_cmp_ui()
tpm_tis: Resend command to recover from data transfer errors
alx: fix OOB-read compiler warning
drm/exynos: fix a possible null-pointer dereference due to data race in exynos_drm_crtc_atomic_disable()
md: raid1: fix potential OOB in raid1_remove_disk()
ext2: fix datatype of block number in ext2_xattr_set2()
fs/jfs: prevent double-free in dbUnmount() after failed jfs_remount()
jfs: fix invalid free of JFS_IP(ipimap)->i_imap in diUnmount
powerpc/pseries: fix possible memory leak in ibmebus_bus_init()
media: dvb-usb-v2: af9035: Fix null-ptr-deref in af9035_i2c_master_xfer
media: dw2102: Fix null-ptr-deref in dw2102_i2c_transfer()
media: af9005: Fix null-ptr-deref in af9005_i2c_xfer
media: anysee: fix null-ptr-deref in anysee_master_xfer
media: az6007: Fix null-ptr-deref in az6007_i2c_xfer()
iio: core: Use min() instead of min_t() to make code more robust
media: tuners: qt1010: replace BUG_ON with a regular error
media: pci: cx23885: replace BUG with error return
usb: gadget: fsl_qe_udc: validate endpoint index for ch9 udc
scsi: target: iscsi: Fix buffer overflow in lio_target_nacl_info_show()
serial: cpm_uart: Avoid suspicious locking
kobject: Add sanity check for kset->kobj.ktype in kset_register()
md/raid1: fix error: ISO C90 forbids mixed declarations
attr: block mode changes of symlinks
btrfs: fix lockdep splat and potential deadlock after failure running delayed items
nfsd: fix change_info in NFSv4 RENAME replies
mtd: rawnand: brcmnand: Fix crash during the panic_write
mtd: rawnand: brcmnand: Fix potential false time out warning
mtd: rawnand: brcmnand: Fix ECC level field setting for v7.2 controller
mtd: rawnand: brcmnand: Fix potential out-of-bounds access in oob write
net/sched: cls_fw: No longer copy tcf_result on update to avoid use-after-free
net/sched: Retire rsvp classifier
Linux 4.14.326
Change-Id: I22815ecf1b4b346f889ccaa561b7cb9a20f204ce
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
commit 265b4da82dbf5df04bee5a5d46b7474b1aaf326a upstream.
The rsvp classifier has served us well for about a quarter of a century but has
has not been getting much maintenance attention due to lack of known users.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Kyle Zeng <zengyhkyle@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 76e42ae831991c828cffa8c37736ebfb831ad5ec upstream.
When fw_change() is called on an existing filter, the whole
tcf_result struct is always copied into the new instance of the filter.
This causes a problem when updating a filter bound to a class,
as tcf_unbind_filter() is always called on the old instance in the
success path, decreasing filter_cnt of the still referenced class
and allowing it to be deleted, leading to a use-after-free.
Fix this by no longer copying the tcf_result struct from the old filter.
Fixes: e35a8ee5993b ("net: sched: fw use RCU")
Reported-by: valis <sec@valis.email>
Reported-by: Bing-Jhong Billy Jheng <billy@starlabs.sg>
Signed-off-by: valis <sec@valis.email>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Pedro Tammela <pctammela@mojatatu.com>
Reviewed-by: M A Ramdhan <ramdhan@starlabs.sg>
Link: https://lore.kernel.org/r/20230729123202.72406-3-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ Fixed small conflict as 'fnew->ifindex' assignment is not protected by
CONFIG_NET_CLS_IND on upstream since a51486266c3 ]
Signed-off-by: Luiz Capitulino <luizcap@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d53244186c9ac58cb88d76a0958ca55b83a15cd upstream.
When the oob buffer length is not in multiple of words, the oob write
function does out-of-bounds read on the oob source buffer at the last
iteration. Fix that by always checking length limit on the oob buffer
read and fill with 0xff when reaching the end of the buffer to the oob
registers.
Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-5-william.zhang@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ec2839a9062db8a592525a3fdabd42dcd9a3a9b upstream.
v7.2 controller has different ECC level field size and shift in the acc
control register than its predecessor and successor controller. It needs
to be set specifically.
Fixes: decba6d47869 ("mtd: brcmnand: Add v7.2 controller support")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-2-william.zhang@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9cc0a598b944816f2968baf2631757f22721b996 upstream.
If system is busy during the command status polling function, the driver
may not get the chance to poll the status register till the end of time
out and return the premature status. Do a final check after time out
happens to ensure reading the correct status.
Fixes: 9d2ee0a60b8b ("mtd: nand: brcmnand: Check flash #WP pin status before nand erase/program")
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20230706182909.79151-3-william.zhang@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fdd2630a7398191e84822612e589062063bd4f3d upstream.
nfsd sends the transposed directory change info in the RENAME reply. The
source directory is in save_fh and the target is in current_fh.
Reported-by: Zhi Li <yieli@redhat.com>
Reported-by: Benjamin Coddington <bcodding@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2218844
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5d1f903f75a80daa4dfb3d84e114ec8ecbf29956 upstream.
Changing the mode of symlinks is meaningless as the vfs doesn't take the
mode of a symlink into account during path lookup permission checking.
However, the vfs doesn't block mode changes on symlinks. This however,
has lead to an untenable mess roughly classifiable into the following
two categories:
(1) Filesystems that don't implement a i_op->setattr() for symlinks.
Such filesystems may or may not know that without i_op->setattr()
defined, notify_change() falls back to simple_setattr() causing the
inode's mode in the inode cache to be changed.
That's a generic issue as this will affect all non-size changing
inode attributes including ownership changes.
Example: afs
(2) Filesystems that fail with EOPNOTSUPP but change the mode of the
symlink nonetheless.
Some filesystems will happily update the mode of a symlink but still
return EOPNOTSUPP. This is the biggest source of confusion for
userspace.
The EOPNOTSUPP in this case comes from POSIX ACLs. Specifically it
comes from filesystems that call posix_acl_chmod(), e.g., btrfs via
if (!err && attr->ia_valid & ATTR_MODE)
err = posix_acl_chmod(idmap, dentry, inode->i_mode);
Filesystems including btrfs don't implement i_op->set_acl() so
posix_acl_chmod() will report EOPNOTSUPP.
When posix_acl_chmod() is called, most filesystems will have
finished updating the inode.
Perversely, this has the consequences that this behavior may depend
on two kconfig options and mount options:
* CONFIG_POSIX_ACL={y,n}
* CONFIG_${FSTYPE}_POSIX_ACL={y,n}
* Opt_acl, Opt_noacl
Example: btrfs, ext4, xfs
The only way to change the mode on a symlink currently involves abusing
an O_PATH file descriptor in the following manner:
fd = openat(-1, "/path/to/link", O_CLOEXEC | O_PATH | O_NOFOLLOW);
char path[PATH_MAX];
snprintf(path, sizeof(path), "/proc/self/fd/%d", fd);
chmod(path, 0000);
But for most major filesystems with POSIX ACL support such as btrfs,
ext4, ceph, tmpfs, xfs and others this will fail with EOPNOTSUPP with
the mode still updated due to the aforementioned posix_acl_chmod()
nonsense.
So, given that for all major filesystems this would fail with EOPNOTSUPP
and that both glibc (cf. [1]) and musl (cf. [2]) outright block mode
changes on symlinks we should just try and block mode changes on
symlinks directly in the vfs and have a clean break with this nonsense.
If this causes any regressions, we do the next best thing and fix up all
filesystems that do return EOPNOTSUPP with the mode updated to not call
posix_acl_chmod() on symlinks.
But as usual, let's try the clean cut solution first. It's a simple
patch that can be easily reverted. Not marking this for backport as I'll
do that manually if we're reasonably sure that this works and there are
no strong objections.
We could block this in chmod_common() but it's more appropriate to do it
notify_change() as it will also mean that we catch filesystems that
change symlink permissions explicitly or accidently.
Similar proposals were floated in the past as in [3] and [4] and again
recently in [5]. There's also a couple of bugs about this inconsistency
as in [6] and [7].
Link: https://sourceware.org/git/?p=glibc.git;a=blob;f=sysdeps/unix/sysv/linux/fchmodat.c;h=99527a3727e44cb8661ee1f743068f108ec93979;hb=HEAD [1]
Link: https://git.musl-libc.org/cgit/musl/tree/src/stat/fchmodat.c [2]
Link: https://lore.kernel.org/all/20200911065733.GA31579@infradead.org [3]
Link: https://sourceware.org/legacy-ml/libc-alpha/2020-02/msg00518.html [4]
Link: https://lore.kernel.org/lkml/87lefmbppo.fsf@oldenburg.str.redhat.com [5]
Link: https://sourceware.org/legacy-ml/libc-alpha/2020-02/msg00467.html [6]
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=14578#c17 [7]
Reviewed-by: Aleksa Sarai <cyphar@cyphar.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org # please backport to all LTSes but not before v6.6-rc2 is tagged
Suggested-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Florian Weimer <fweimer@redhat.com>
Message-Id: <20230712-vfs-chmod-symlinks-v2-1-08cfb92b61dd@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit df203da47f4428bc286fc99318936416253a321c ]
There is a compile error when this commit is added:
md: raid1: fix potential OOB in raid1_remove_disk()
drivers/md/raid1.c: In function 'raid1_remove_disk':
drivers/md/raid1.c:1844:9: error: ISO C90 forbids mixed declarations
and code [-Werror=declaration-after-statement]
1844 | struct raid1_info *p = conf->mirrors + number;
| ^~~~~~
That's because the new code was inserted before the struct.
The change is move the struct command above this commit.
Fixes: 8b0472b50bcf ("md: raid1: fix potential OOB in raid1_remove_disk()")
Signed-off-by: Nigel Croxon <ncroxon@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/46d929d0-2aab-4cf2-b2bf-338963e8ba5a@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d0fe8c52bb3029d83e323c961221156ab98680b ]
When I register a kset in the following way:
static struct kset my_kset;
kobject_set_name(&my_kset.kobj, "my_kset");
ret = kset_register(&my_kset);
A null pointer dereference exception is occurred:
[ 4453.568337] Unable to handle kernel NULL pointer dereference at \
virtual address 0000000000000028
... ...
[ 4453.810361] Call trace:
[ 4453.813062] kobject_get_ownership+0xc/0x34
[ 4453.817493] kobject_add_internal+0x98/0x274
[ 4453.822005] kset_register+0x5c/0xb4
[ 4453.825820] my_kobj_init+0x44/0x1000 [my_kset]
... ...
Because I didn't initialize my_kset.kobj.ktype.
According to the description in Documentation/core-api/kobject.rst:
- A ktype is the type of object that embeds a kobject. Every structure
that embeds a kobject needs a corresponding ktype.
So add sanity check to make sure kset->kobj.ktype is not NULL.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20230805084114.1298-2-thunder.leizhen@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 801f287c93ff95582b0a2d2163f12870a2f076d4 ]
The function lio_target_nacl_info_show() uses sprintf() in a loop to print
details for every iSCSI connection in a session without checking for the
buffer length. With enough iSCSI connections it's possible to overflow the
buffer provided by configfs and corrupt the memory.
This patch replaces sprintf() with sysfs_emit_at() that checks for buffer
boundries.
Signed-off-by: Konstantin Shelekhin <k.shelekhin@yadro.com>
Link: https://lore.kernel.org/r/20230722152657.168859-2-k.shelekhin@yadro.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce9daa2efc0872a9a68ea51dc8000df05893ef2e ]
We should verify the bound of the array to assure that host
may not manipulate the index to point past endpoint array.
Signed-off-by: Ma Ke <make_ruc2021@163.com>
Acked-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20230628081511.186850-1-make_ruc2021@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e1796fd4904fdd6062a8e4589778ea899ea0c8d ]
It was completely unnecessary to use BUG in buffer_prepare().
Just replace it with an error return. This also fixes a smatch warning:
drivers/media/pci/cx23885/cx23885-video.c:422 buffer_prepare() error: uninitialized symbol 'ret'.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee630b29ea44d1851bb6c903f400956604834463 ]
BUG_ON is unnecessary here, and in addition it confuses smatch.
Replacing this with an error return help resolve this smatch
warning:
drivers/media/tuners/qt1010.c:350 qt1010_init() error: buffer overflow 'i2c_data' 34 <= 34
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cb1d17535061ca295903f97f5cb0af9db719c02c ]
min() has strict type checking and preferred over min_t() for
unsigned types to avoid overflow. Here it's unclear why min_t()
was chosen since both variables are of the same type. In any
case update to use min().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230721170022.3461-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1047f9343011f2cedc73c64829686206a7e9fc3f ]
In az6007_i2c_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach az6007_i2c_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c30411266fd67ea3c02a05c157231654d5a3bdc9 ]
In anysee_master_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach anysee_master_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: add spaces around +]
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4ee84f27625ce1fdf41e8483fa0561a1b837d10 ]
In af9005_i2c_xfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach af9005_i2c_xfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 0ed554fd769a
("media: dvb-usb: az6027: fix null-ptr-deref in az6027_i2c_xfer()")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ae544d94abc8ff77b1b9bf8774def3fa5689b5b ]
In dw2102_i2c_transfer, msg is controlled by user. When msg[i].buf
is null and msg[i].len is zero, former checks on msg[i].buf would be
passed. Malicious data finally reach dw2102_i2c_transfer. If accessing
msg[i].buf[0] without sanity check, null ptr deref would happen.
We add check on msg[i].len to prevent crash.
Similar commit:
commit 950e252cb469
("[media] dw2102: limit messages to buffer size")
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
