* remotes/origin/tmp-c50e5cb:
Linux 4.14.39
powerpc/eeh: Fix race with driver un/bind
arm/arm64: KVM: Add PSCI version selection API
tick/sched: Do not mess with an enqueued hrtimer
x86/microcode: Do not exit early from __reload_late()
x86/microcode/intel: Save microcode patch unconditionally
x86/smpboot: Don't use mwait_play_dead() on AMD systems
x86/ipc: Fix x32 version of shmid64_ds and msqid64_ds
tools/lib/subcmd/pager.c: do not alias select() params
objtool, perf: Fix GCC 8 -Wrestrict error
drm/i915: Enable display WA#1183 from its correct spot
drm/amdgpu: set COMPUTE_PGM_RSRC1 for SGPR/VGPR clearing shaders
rtc: opal: Fix OPAL RTC driver OPAL_BUSY loops
cpufreq: powernv: Fix hardlockup due to synchronous smp_call in timer interrupt
earlycon: Use a pointer table to fix __earlycon_table stride
fpga-manager: altera-ps-spi: preserve nCONFIG state
libceph: validate con->state at the top of try_write()
libceph: reschedule a tick in finish_hunting()
libceph: un-backoff on tick when we have a authenticated session
ASoC: fsl_esai: Fix divisor calculation failure at lower ratio
crypto: drbg - set freed buffers to NULL
powerpc/powernv/npu: Do a PID GPU TLB flush when invalidating a large address range
powerpc/mm: Flush cache on memory hot(un)plug
KVM: arm/arm64: Close VMID generation race
ARM: socfpga_defconfig: Remove QSPI Sector 4K size force
ARM: amba: Don't read past the end of sysfs "driver_override" buffer
ARM: amba: Fix race condition with driver_override
ARM: amba: Make driver_override output consistent with other buses
PCI: aardvark: Fix PCIe Max Read Request Size setting
PCI: aardvark: Use ISR1 instead of ISR0 interrupt in legacy irq mode
PCI: aardvark: Set PIO_ADDR_LS correctly in advk_pcie_rd_conf()
PCI: aardvark: Fix logic in advk_pcie_{rd,wr}_conf()
ANDROID: binder: prevent transactions into own process.
vfio: ccw: process ssch with interrupts disabled
bfq-iosched: ensure to clear bic/bfqq pointers when preparing request
scsi: sd: Defer spinning up drive while SANITIZE is in progress
kobject: don't use WARN for registration failures
mtd: rawnand: tango: Fix struct clk memory leak
mtd: cfi: cmdset_0002: Do not allow read/write to suspend erase block.
mtd: cfi: cmdset_0001: Workaround Micron Erase suspend bug.
mtd: cfi: cmdset_0001: Do not allow read/write to suspend erase block.
mtd: spi-nor: cadence-quadspi: Fix page fault kernel panic
ALSA: hda/realtek - change the location for one of two front mics
ALSA: hda/realtek - Update ALC255 depop optimize
ALSA: hda/realtek - Add some fixes for ALC233
ALSA: hda: Hardening for potential Spectre v1
ALSA: seq: oss: Hardening for potential Spectre v1
ALSA: seq: oss: Fix unbalanced use lock for synth MIDI device
ALSA: core: Report audio_tstamp in snd_pcm_sync_ptr
ALSA: pcm: Return negative delays from SNDRV_PCM_IOCTL_DELAY.
ALSA: control: Hardening for potential Spectre v1
ALSA: rme9652: Hardening for potential Spectre v1
ALSA: hdspm: Hardening for potential Spectre v1
ALSA: asihpi: Hardening for potential Spectre v1
ALSA: opl3: Hardening for potential Spectre v1
ALSA: hda - Skip jack and others for non-existing PCM streams
ALSA: dice: fix error path to destroy initialized stream data
ALSA: dice: fix OUI for TC group
tty: Use __GFP_NOFAIL for tty_ldisc_get()
tty: Avoid possible error pointer dereference at tty_ldisc_restore().
tty: n_gsm: Fix DLCI handling for ADM mode if debug & 2 is not set
tty: n_gsm: Fix long delays with control frame timeouts in ADM mode
tty: Don't call panic() at tty_ldisc_init()
drm/virtio: fix vq wait_event condition
virtio_console: reset on out of memory
virtio_console: move removal code
virtio_console: drop custom control queue cleanup
virtio_console: free buffers after reset
virtio_console: don't tie bufs to a vq
virtio: add ability to iterate over vqs
ALSA: usb-audio: Skip broken EU on Dell dock USB-audio
USB: Increment wakeup count on remote wakeup.
usb: core: Add quirk for HP v222w 16GB Mini
usb: typec: ucsi: Increase command completion timeout value
USB: serial: cp210x: add ID for NI USB serial console
USB: serial: ftdi_sio: use jtag quirk for Arrow USB Blaster
USB: serial: simple: add libtransistor console
xhci: Fix USB ports for Dell Inspiron 5775
Revert "xhci: plat: Register shutdown for xhci_plat"
usbip: vhci_hcd: check rhport before using in vhci_hub_control()
usbip: vhci_hcd: Fix usb device and sockfd leaks
usbip: usbip_host: fix to hold parent lock for device_attach() calls
usbip: usbip_event: fix to not print kernel pointer address
random: rate limit unseeded randomness warnings
random: fix possible sleeping allocation from irq context
random: set up the NUMA crng instances after the CRNG is fully initialized
ext4: fix bitmap position validation
ext4: add validity checks for bitmap block numbers
ext4: add MODULE_SOFTDEP to ensure crc32c is included in the initramfs
ext4: set h_journal if there is a failure starting a reserved handle
ext4: prevent right-shifting extents beyond EXT_MAX_BLOCKS
cfi: print target address on failure
Change-Id: I9a3d0c10b1a2d2c28872401cb656d490604352a7
Signed-off-by: Isaac J. Manjarres <isaacm@codeaurora.org>
commit 1f71addd34f4c442bec7d7c749acc1beb58126f2 upstream.
Kaike reported that in tests rdma hrtimers occasionaly stopped working. He
did great debugging, which provided enough context to decode the problem.
CPU 3 CPU 2
idle
start sched_timer expires = 712171000000
queue->next = sched_timer
start rdmavt timer. expires = 712172915662
lock(baseof(CPU3))
tick_nohz_stop_tick()
tick = 716767000000 timerqueue_add(tmr)
hrtimer_set_expires(sched_timer, tick);
sched_timer->expires = 716767000000 <---- FAIL
if (tmr->expires < queue->next->expires)
hrtimer_start(sched_timer) queue->next = tmr;
lock(baseof(CPU3))
unlock(baseof(CPU3))
timerqueue_remove()
timerqueue_add()
ts->sched_timer is queued and queue->next is pointing to it, but then
ts->sched_timer.expires is modified.
This not only corrupts the ordering of the timerqueue RB tree, it also
makes CPU2 see the new expiry time of timerqueue->next->expires when
checking whether timerqueue->next needs to be updated. So CPU2 sees that
the rdma timer is earlier than timerqueue->next and sets the rdma timer as
new next.
Depending on whether it had also seen the new time at RB tree enqueue, it
might have queued the rdma timer at the wrong place and then after removing
the sched_timer the RB tree is completely hosed.
The problem was introduced with a commit which tried to solve inconsistency
between the hrtimer in the tick_sched data and the underlying hardware
clockevent. It split out hrtimer_set_expires() to store the new tick time
in both the NOHZ and the NOHZ + HIGHRES case, but missed the fact that in
the NOHZ + HIGHRES case the hrtimer might still be queued.
Use hrtimer_start(timer, tick...) for the NOHZ + HIGHRES case which sets
timer->expires after canceling the timer and move the hrtimer_set_expires()
invocation into the NOHZ only code path which is not affected as it merily
uses the hrtimer as next event storage so code pathes can be shared with
the NOHZ + HIGHRES case.
Fixes: d4af6d933ccf ("nohz: Fix spurious warning when hrtimer and clockevent get out of sync")
Reported-by: "Wan Kaike" <kaike.wan@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Cc: "Marciniszyn Mike" <mike.marciniszyn@intel.com>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: linux-rdma@vger.kernel.org
Cc: "Dalessandro Dennis" <dennis.dalessandro@intel.com>
Cc: "Fleck John" <john.fleck@intel.com>
Cc: stable@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Weiny Ira" <ira.weiny@intel.com>
Cc: "linux-rdma@vger.kernel.org"
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1804241637390.1679@nanos.tec.linutronix.de
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1804242119210.1597@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a check for cpu unbound deferrable timer expiry and raise
softirq for handling the expired timers so that the CPU can
process the cpu unbound deferrable times as early as possible
when a cpu tries to enter/exit idle loop.
Change-Id: Ieffa74fa22a4d25493f5590b5ac1e0d784fcbbad
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
* remotes/origin/tmp-9189141:
Linux 4.14.13
KVM: s390: prevent buffer overrun on memory hotplug during migration
KVM: s390: fix cmma migration for multiple memory slots
mtd: nand: pxa3xx: Fix READOOB implementation
parisc: qemu idle sleep support
parisc: Fix alignment of pa_tlb_lock in assembly on 32-bit SMP kernel
apparmor: fix regression in mount mediation when feature set is pinned
x86/microcode/AMD: Add support for fam17h microcode loading
Input: elantech - add new icbody type 15
powerpc/mm: Fix SEGV on mapped region to return SEGV_ACCERR
ARC: uaccess: dont use "l" gcc inline asm constraint modifier
iommu/arm-smmu-v3: Cope with duplicated Stream IDs
iommu/arm-smmu-v3: Don't free page table ops twice
kernel/signal.c: remove the no longer needed SIGNAL_UNKILLABLE check in complete_signal()
kernel/signal.c: protect the SIGNAL_UNKILLABLE tasks from !sig_kernel_only() signals
kernel/signal.c: protect the traced SIGNAL_UNKILLABLE tasks from SIGKILL
x86 / CPU: Always show current CPU frequency in /proc/cpuinfo
x86 / CPU: Avoid unnecessary IPIs in arch_freq_get_on_cpu()
fscache: Fix the default for fscache_maybe_release_page()
sunxi-rsb: Include OF based modalias in device uevent
drm/i915: Apply Display WA #1183 on skl, kbl, and cfl
drm/i915: Disable DC states around GMBUS on GLK
crypto: chelsio - select CRYPTO_GF128MUL
crypto: pcrypt - fix freeing pcrypt instances
crypto: chacha20poly1305 - validate the digest size
crypto: n2 - cure use after free
efi/capsule-loader: Reinstate virtual capsule mapping
btrfs: fix refcount_t usage when deleting btrfs_delayed_nodes
userfaultfd: clear the vma->vm_userfaultfd_ctx if UFFD_EVENT_FORK fails
mm/sparse.c: wrong allocation for mem_section
mm/mprotect: add a cond_resched() inside change_pmd_range()
kernel/acct.c: fix the acct->needcheck check in check_free_space()
x86/pti: Rename BUG_CPU_INSECURE to BUG_CPU_MELTDOWN
x86/alternatives: Add missing '\n' at end of ALTERNATIVE inline asm
x86/tlb: Drop the _GPL from the cpu_tlbstate export
x86/events/intel/ds: Use the proper cache flush method for mapping ds buffers
x86/kaslr: Fix the vaddr_end mess
x86/mm: Map cpu_entry_area at the same place on 4/5 level
x86/mm: Set MODULES_END to 0xffffffffff000000
ANDROID: netfilter: xt_qtaguid: Fix 4.14 compilation
ANDROID: Squashfs: optimize reading uncompressed data
ANDROID: Squashfs: implement .readpages()
ANDROID: Squashfs: replace buffer_head with BIO
ANDROID: Squashfs: refactor page_actor
ANDROID: usb: f_fs: Prevent gadget unbind if it is already unbound
Linux 4.14.12
rtc: m41t80: remove unneeded checks from m41t80_sqw_set_rate
rtc: m41t80: avoid i2c read in m41t80_sqw_is_prepared
rtc: m41t80: avoid i2c read in m41t80_sqw_recalc_rate
rtc: m41t80: fix m41t80_sqw_round_rate return value
rtc: m41t80: m41t80_sqw_set_rate should return 0 on success
Revert "xfrm: Fix stack-out-of-bounds read in xfrm_state_find."
x86/process: Define cpu_tss_rw in same section as declaration
x86/pti: Switch to kernel CR3 at early in entry_SYSCALL_compat()
x86/dumpstack: Print registers for first stack frame
x86/dumpstack: Fix partial register dumps
x86/pti: Make sure the user/kernel PTEs match
x86/cpu, x86/pti: Do not enable PTI on AMD processors
capabilities: fix buffer overread on very short xattr
exec: Weaken dumpability for secureexec
Linux 4.14.11
tty: fix tty_ldisc_receive_buf() documentation
n_tty: fix EXTPROC vs ICANON interaction with TIOCINQ (aka FIONREAD)
x86/ldt: Make LDT pgtable free conditional
x86/ldt: Plug memory leak in error path
x86/espfix/64: Fix espfix double-fault handling on 5-level systems
x86-32: Fix kexec with stack canary (CONFIG_CC_STACKPROTECTOR)
x86/mm: Remove preempt_disable/enable() from __native_flush_tlb()
x86/smpboot: Remove stale TLB flush invocations
nohz: Prevent a timer interrupt storm in tick_nohz_stop_sched_tick()
staging: android: ion: Fix dma direction for dma_sync_sg_for_cpu/device
drivers: base: cacheinfo: fix cache type for non-architected system cache
phy: tegra: fix device-tree node lookups
binder: fix proc->files use-after-free
timers: Reinitialize per cpu bases on hotplug
timers: Invoke timer_start_debug() where it makes sense
timers: Use deferrable base independent of base::nohz_active
usb: xhci: Add XHCI_TRUST_TX_LENGTH for Renesas uPD720201
USB: Fix off by one in type-specific length check of BOS SSP capability
usb: add RESET_RESUME for ELSA MicroLink 56K
usb: Add device quirk for Logitech HD Pro Webcam C925e
USB: serial: option: adding support for YUGA CLM920-NC5
USB: serial: option: add support for Telit ME910 PID 0x1101
USB: serial: qcserial: add Sierra Wireless EM7565
USB: serial: ftdi_sio: add id for Airbus DS P8GR
USB: chipidea: msm: fix ulpi-node lookup
usbip: vhci: stop printing kernel pointer addresses in messages
usbip: stub: stop printing kernel pointer addresses in messages
usbip: prevent leaking socket pointer address in messages
usbip: fix usbip bind writing random string after command in match_busid
sparc64: repair calling incorrect hweight function from stubs
skbuff: in skb_copy_ubufs unclone before releasing zerocopy
skbuff: skb_copy_ubufs must release uarg even without user frags
skbuff: orphan frags before zerocopy clone
Revert "mlx5: move affinity hints assignments to generic code"
ipv6: set all.accept_dad to 0 by default
ipv4: fib: Fix metrics match when deleting a route
phylink: ensure AN is enabled
phylink: ensure the PHY interface mode is appropriately set
bnxt_en: Fix sources of spurious netpoll warnings
net: sched: fix static key imbalance in case of ingress/clsact_init error
vxlan: restore dev->mtu setting based on lower device
net/mlx5: FPGA, return -EINVAL if size is zero
tcp: refresh tcp_mstamp from timers callbacks
ipv6: Honor specified parameters in fibmatch lookup
net: phy: marvell: Limit 88m1101 autoneg errata to 88E1145 as well.
tcp: fix potential underestimation on rcv_rtt
mlxsw: spectrum: Disable MAC learning for ovs port
tipc: fix hanging poll() for stream sockets
sctp: make sure stream nums can match optlen in sctp_setsockopt_reset_streams
s390/qeth: fix error handling in checksum cmd callback
net: dsa: bcm_sf2: Clear IDDQ_GLOBAL_PWR bit for PHY
sfc: pass valid pointers from efx_enqueue_unwind
openvswitch: Fix pop_vlan action for double tagged frames
net/mlx5: Fix error flow in CREATE_QP command
net/mlx5e: Prevent possible races in VXLAN control flow
net/mlx5e: Add refcount to VXLAN structure
net/mlx5e: Fix features check of IPv6 traffic
net/mlx5e: Fix possible deadlock of VXLAN lock
net/mlx5: Fix rate limit packet pacing naming and struct
tcp: invalidate rate samples during SACK reneging
sock: free skb in skb_complete_tx_timestamp on error
net: phy: micrel: ksz9031: reconfigure autoneg after phy autoneg workaround
net: Fix double free and memory corruption in get_net_ns_by_id()
net: bridge: fix early call to br_stp_change_bridge_id and plug newlink leaks
ipv4: Fix use-after-free when flushing FIB tables
ip6_gre: fix device features for ioctl setup
adding missing rcu_read_unlock in ipxip6_rcv
sctp: Replace use of sockets_allocated with specified macro.
net: mvmdio: disable/unprepare clocks in EPROBE_DEFER case
net: ipv4: fix for a race condition in raw_sendmsg
s390/qeth: update takeover IPs after configuration change
s390/qeth: lock IP table while applying takeover changes
s390/qeth: don't apply takeover changes to RXIP
s390/qeth: apply takeover changes when mode is toggled
tcp_bbr: reset long-term bandwidth sampling on loss recovery undo
tcp_bbr: reset full pipe detection on loss recovery undo
tg3: Fix rx hang on MTU change with 5717/5719
tcp md5sig: Use skb's saddr when replying to an incoming segment
tcp_bbr: record "full bw reached" decision in new full_bw_reached bit
RDS: Check cmsg_len before dereferencing CMSG_DATA
ptr_ring: add barriers
net: reevalulate autoflowlabel setting after sysctl setting
net: qmi_wwan: add Sierra EM7565 1199:9091
netlink: Add netns check on taps
net: igmp: Use correct source address on IGMPv3 reports
net: fec: unmap the xmit buffer that are not transferred by DMA
ipv6: mcast: better catch silly mtu values
ipv4: igmp: guard against silly MTU values
kbuild: add '-fno-stack-check' to kernel build options
block: don't let passthrough IO go into .make_request_fn()
block: fix blk_rq_append_bio
cpufreq: schedutil: Use idle_calls counter of the remote CPU
ALSA: hda - Fix missing COEF init for ALC225/295/299
ALSA: hda - fix headset mic detection issue on a Dell machine
ALSA: hda - change the location for one mic on a Lenovo machine
ALSA: hda - Add MIC_NO_PRESENCE fixup for 2 HP machines
ALSA: hda: Drop useless WARN_ON()
IB/core: Verify that QP is security enabled in create and destroy
IB/uverbs: Fix command checking as part of ib_uverbs_ex_modify_qp()
IB/mlx5: Serialize access to the VMA list
IB/hfi: Only read capability registers if the capability exists
gpio: fix "gpio-line-names" property retrieval
ASoC: tlv320aic31xx: Fix GPIO1 register definition
ASoC: twl4030: fix child-node lookup
ASoC: fsl_ssi: AC'97 ops need regmap, clock and cleaning up on failure
ASoC: da7218: fix fix child-node lookup
ASoC: wm_adsp: Fix validation of firmware and coeff lengths
ASoC: codecs: msm8916-wcd: Fix supported formats
iw_cxgb4: Only validate the MSN for successful completions
ring-buffer: Do no reuse reader page if still in use
ring-buffer: Mask out the info bits when returning buffer page length
x86/ldt: Make the LDT mapping RO
x86/mm/dump_pagetables: Allow dumping current pagetables
x86/mm/dump_pagetables: Check user space page table for WX pages
x86/mm/dump_pagetables: Add page table directory to the debugfs VFS hierarchy
x86/mm/pti: Add Kconfig
x86/dumpstack: Indicate in Oops whether PTI is configured and enabled
x86/mm: Clarify the whole ASID/kernel PCID/user PCID naming
x86/mm: Use INVPCID for __native_flush_tlb_single()
x86/mm: Optimize RESTORE_CR3
x86/mm: Use/Fix PCID to optimize user/kernel switches
x86/mm: Abstract switching CR3
x86/mm: Allow flushing for future ASID switches
x86/pti: Map the vsyscall page if needed
x86/pti: Put the LDT in its own PGD if PTI is on
x86/mm/64: Make a full PGD-entry size hole in the memory map
x86/events/intel/ds: Map debug buffers in cpu_entry_area
x86/cpu_entry_area: Add debugstore entries to cpu_entry_area
x86/mm/pti: Map ESPFIX into user space
x86/mm/pti: Share entry text PMD
x86/entry: Align entry text section to PMD boundary
x86/mm/pti: Share cpu_entry_area with user space page tables
x86/mm/pti: Force entry through trampoline when PTI active
x86/mm/pti: Add functions to clone kernel PMDs
x86/mm/pti: Populate user PGD
x86/mm/pti: Allocate a separate user PGD
x86/mm/pti: Allow NX poison to be set in p4d/pgd
x86/mm/pti: Add mapping helper functions
x86/pti: Add the pti= cmdline option and documentation
x86/mm/pti: Add infrastructure for page table isolation
x86/mm/pti: Prepare the x86/entry assembly code for entry/exit CR3 switching
x86/mm/pti: Disable global pages if PAGE_TABLE_ISOLATION=y
x86/cpufeatures: Add X86_BUG_CPU_INSECURE
tracing: Fix crash when it fails to alloc ring buffer
tracing: Fix possible double free on failure of allocating trace buffer
tracing: Remove extra zeroing out of the ring buffer page
Conflicts:
drivers/staging/android/ion/ion.c
kernel/time/timer.c
Change-Id: Ia5b16c96ab44e640e2f10ab535c4c672b670cbdc
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
commit 5d62c183f9e9df1deeea0906d099a94e8a43047a upstream.
The conditions in irq_exit() to invoke tick_nohz_irq_exit() which
subsequently invokes tick_nohz_stop_sched_tick() are:
if ((idle_cpu(cpu) && !need_resched()) || tick_nohz_full_cpu(cpu))
If need_resched() is not set, but a timer softirq is pending then this is
an indication that the softirq code punted and delegated the execution to
softirqd. need_resched() is not true because the current interrupted task
takes precedence over softirqd.
Invoking tick_nohz_irq_exit() in this case can cause an endless loop of
timer interrupts because the timer wheel contains an expired timer, but
softirqs are not yet executed. So it returns an immediate expiry request,
which causes the timer to fire immediately again. Lather, rinse and
repeat....
Prevent that by adding a check for a pending timer soft interrupt to the
conditions in tick_nohz_stop_sched_tick() which avoid calling
get_next_timer_interrupt(). That keeps the tick sched timer on the tick and
prevents a repetitive programming of an already expired timer.
Reported-by: Sebastian Siewior <bigeasy@linutronix.d>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Link: https://lkml.kernel.org/r/alpine.DEB.2.20.1712272156050.2431@nanos
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 466a2b42d67644447a1765276259a3ea5531ddff upstream.
Since the recent remote cpufreq callback work, its possible that a cpufreq
update is triggered from a remote CPU. For single policies however, the current
code uses the local CPU when trying to determine if the remote sg_cpu entered
idle or is busy. This is incorrect. To remedy this, compare with the nohz tick
idle_calls counter of the remote CPU.
Fixes: 674e75411fc2 (sched: cpufreq: Allow remote cpufreq callbacks)
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add get_next_event_cpu to get the next wakeup time for the CPU. This
is used by the sleep driver if it has to query the next wakeup for a
CPU other than the thread that its running on.
Change-Id: I889de90928b9b1e51a51b2f9205d7865facfcc20
Signed-off-by: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Remove unncessary function and data structure for rq_stats
since no driver relies on this information. Keep the defer_timer
kobj since irq balancer still needs this.
Change-Id: I20516fd7ed8496426ef75246c7b77c1937c696dc
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
Add a snapshot of msm_rq_stats driver as of msm-4.4 commit
c605e110ab186049 (Merge "usb: gadget: composite: Return bcdUSB
0x0310 for Superspeed and higher").
This driver is used to expose statistics to the irq balancer.
Change-Id: I723310d12616f61598b2815e5ed3024418966ecc
Signed-off-by: Kyle Yan <kyan@codeaurora.org>
Signed-off-by: Runmin Wang <runminw@codeaurora.org>
Pull nohz updates from Ingo Molnar:
"The main changes in this cycle relate to fixing another bad (but
sporadic and hard to detect) interaction between the dynticks
scheduler tick and hrtimers, plus related improvements to better
detection and handling of similar problems - by Frédéric Weisbecker"
* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
nohz: Fix spurious warning when hrtimer and clockevent get out of sync
nohz: Fix buggy tick delay on IRQ storms
nohz: Reset next_tick cache even when the timer has no regs
nohz: Fix collision between tick and other hrtimers, again
nohz: Add hrtimer sanity check
The idle load balancing registration path assumes that we only stop the
tick when the CPU is idle, ignoring the nohz full case. As a result, a
nohz full CPU that is running a task may be chosen to perform idle load
balancing.
Lets make sure that only CPUs in dynticks idle mode can be picked as
idle load balancers.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1497838322-10913-3-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The loadavg naming code still assumes that nohz == idle whereas its code
is actually handling well both nohz idle and nohz full.
So lets fix the naming according to what the code actually does, to
unconfuse the reader.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1497838322-10913-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The sanity check ensuring that the tick expiry cache (ts->next_tick)
is actually in sync with the hardware clock (dev->next_event) makes the
wrong assumption that the clock can't be programmed later than the
hrtimer deadline.
In fact the clock hardware can be programmed later on some conditions
such as:
* The hrtimer deadline is already in the past.
* The hrtimer deadline is earlier than the minimum delay supported
by the hardware.
Such conditions can be met when we program the tick, for example if the
last jiffies update hasn't been seen by the current CPU yet, we may
program the hrtimer to a deadline that is earlier than ktime_get()
because last_jiffies_update is our timestamp base to compute the next
tick.
As a result, we can randomly observe such warning:
WARNING: CPU: 5 PID: 0 at kernel/time/tick-sched.c:794 tick_nohz_stop_sched_tick kernel/time/tick-sched.c:791 [inline]
Call Trace:
tick_nohz_irq_exit
tick_irq_exit
irq_exit
exiting_irq
smp_call_function_interrupt
smp_call_function_single_interrupt
call_function_single_interrupt
Therefore, let's rather make sure that the tick expiry cache is sync'ed
with the tick hrtimer deadline, against which it is not supposed to
drift away. The clock hardware instead has its own will and can't be
used as a reliable comparison point.
Reported-and-tested-by: Sasha Levin <alexander.levin@verizon.com>
Reported-and-tested-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: James Hartsock <hartsjc@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Wright <tim@binbash.co.uk>
Link: http://lkml.kernel.org/r/1497326654-14122-1-git-send-email-fweisbec@gmail.com
[ Minor readability edit. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When the tick is stopped and we reach the dynticks evaluation code on
IRQ exit, we perform a soft tick restart if we observe an expired timer
from there. It means we program the nearest possible tick but we stay in
dynticks mode (ts->tick_stopped = 1) because we may need to stop the tick
again after that expired timer is handled.
Now this solution works most of the time but if we suffer an IRQ storm
and those interrupts trigger faster than the hardware clockevents min
delay, our tick won't fire until that IRQ storm is finished.
Here is the problem: on IRQ exit we reprog the timer to at least
NOW() + min_clockevents_delay. Another IRQ fires before the tick so we
reschedule again to NOW() + min_clockevents_delay, etc... The tick
is eternally rescheduled min_clockevents_delay ahead.
A solution is to simply remove this soft tick restart. After all
the normal dynticks evaluation path can handle 0 delay just fine. And
by doing that we benefit from the optimization branch which avoids
clock reprogramming if the clockevents deadline hasn't changed since
the last reprog. This fixes our issue because we don't do repetitive
clock reprog that always add hardware min delay.
As a side effect it should even optimize the 0 delay path in general.
Reported-and-tested-by: Octavian Purdila <octavian.purdila@nxp.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1496328429-13317-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Handle tick interrupts whose regs are NULL, out of general paranoia. It happens
when hrtimer_interrupt() is called from non-interrupt contexts, such as hotplug
CPU down events.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This restores commit:
24b91e360ef5: ("nohz: Fix collision between tick and other hrtimers")
... which got reverted by commit:
558e8e27e73f: ('Revert "nohz: Fix collision between tick and other hrtimers"')
... due to a regression where CPUs spuriously stopped ticking.
The bug happened when a tick fired too early past its expected expiration:
on IRQ exit the tick was scheduled again to the same deadline but skipped
reprogramming because ts->next_tick still kept in cache the deadline.
This has been fixed now with resetting ts->next_tick from the tick
itself. Extra care has also been taken to prevent from obsolete values
throughout CPU hotplug operations.
When the tick is stopped and an interrupt occurs afterward, we check on
that interrupt exit if the next tick needs to be rescheduled. If it
doesn't need any update, we don't want to do anything.
In order to check if the tick needs an update, we compare it against the
clockevent device deadline. Now that's a problem because the clockevent
device is at a lower level than the tick itself if it is implemented
on top of hrtimer.
Every hrtimer share this clockevent device. So comparing the next tick
deadline against the clockevent device deadline is wrong because the
device may be programmed for another hrtimer whose deadline collides
with the tick. As a result we may end up not reprogramming the tick
accidentally.
In a worst case scenario under full dynticks mode, the tick stops firing
as it is supposed to every 1hz, leaving /proc/stat stalled:
Task in a full dynticks CPU
----------------------------
* hrtimer A is queued 2 seconds ahead
* the tick is stopped, scheduled 1 second ahead
* tick fires 1 second later
* on tick exit, nohz schedules the tick 1 second ahead but sees
the clockevent device is already programmed to that deadline,
fooled by hrtimer A, the tick isn't rescheduled.
* hrtimer A is cancelled before its deadline
* tick never fires again until an interrupt happens...
In order to fix this, store the next tick deadline to the tick_sched
local structure and reuse that value later to check whether we need to
reprogram the clock after an interrupt.
On the other hand, ts->sleep_length still wants to know about the next
clock event and not just the tick, so we want to improve the related
comment to avoid confusion.
Reported-and-tested-by: Tim Wright <tim@binbash.co.uk>
Reported-and-tested-by: Pavel Machek <pavel@ucw.cz>
Reported-by: James Hartsock <hartsjc@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1492783255-5051-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The argument to sched_clock_idle_wakeup_event() has not been used in a
long time. Remove it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The way the schedutil governor uses the PELT metric causes it to
underestimate the CPU utilization in some cases.
That can be easily demonstrated by running kernel compilation on
a Sandy Bridge Intel processor, running turbostat in parallel with
it and looking at the values written to the MSR_IA32_PERF_CTL
register. Namely, the expected result would be that when all CPUs
were 100% busy, all of them would be requested to run in the maximum
P-state, but observation shows that this clearly isn't the case.
The CPUs run in the maximum P-state for a while and then are
requested to run slower and go back to the maximum P-state after
a while again. That causes the actual frequency of the processor to
visibly oscillate below the sustainable maximum in a jittery fashion
which clearly is not desirable.
That has been attributed to CPU utilization metric updates on task
migration that cause the total utilization value for the CPU to be
reduced by the utilization of the migrated task. If that happens,
the schedutil governor may see a CPU utilization reduction and will
attempt to reduce the CPU frequency accordingly right away. That
may be premature, though, for example if the system is generally
busy and there are other runnable tasks waiting to be run on that
CPU already.
This is unlikely to be an issue on systems where cpufreq policies are
shared between multiple CPUs, because in those cases the policy
utilization is computed as the maximum of the CPU utilization values
over the whole policy and if that turns out to be low, reducing the
frequency for the policy most likely is a good idea anyway. On
systems with one CPU per policy, however, it may affect performance
adversely and even lead to increased energy consumption in some cases.
On those systems it may be addressed by taking another utilization
metric into consideration, like whether or not the CPU whose
frequency is about to be reduced has been idle recently, because if
that's not the case, the CPU is likely to be busy in the near future
and its frequency should not be reduced.
To that end, use the counter of idle calls in the timekeeping code.
Namely, make the schedutil governor look at that counter for the
current CPU every time before its frequency is about to be reduced.
If the counter has not changed since the previous iteration of the
governor computations for that CPU, the CPU has been busy for all
that time and its frequency should not be decreased, so if the new
frequency would be lower than the one set previously, the governor
will skip the frequency update.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Joel Fernandes <joelaf@google.com>
We are going to split <linux/sched/nohz.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/nohz.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/stat.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/stat.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to move softlockup APIs out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
<linux/nmi.h> already includes <linux/sched.h>.
Include the <linux/nmi.h> header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/signal.h> out of <linux/sched.h>, which
will have to be picked up from other headers and a couple of .c files.
Create a trivial placeholder <linux/sched/signal.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We are going to split <linux/sched/clock.h> out of <linux/sched.h>, which
will have to be picked up from other headers and .c files.
Create a trivial placeholder <linux/sched/clock.h> file that just
maps to <linux/sched.h> to make this patch obviously correct and
bisectable.
Include the new header in the files that are going to need it.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This reverts commit 24b91e360ef521a2808771633d76ebc68bd5604b and commit
7bdb59f1ad47 ("tick/nohz: Fix possible missing clock reprog after tick
soft restart") that depends on it,
Pavel reports that it causes occasional boot hangs for him that seem to
depend on just how the machine was booted. In particular, his machine
hangs at around the PCI fixups of the EHCI USB host controller, but only
hangs from cold boot, not from a warm boot.
Thomas Gleixner suspecs it's a CPU hotplug interaction, particularly
since Pavel also saw suspend/resume issues that seem to be related.
We're reverting for now while trying to figure out the root cause.
Reported-bisected-and-tested-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org # reverted commits were marked for stable
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ts->next_tick keeps track of the next tick deadline in order to optimize
clock programmation on irq exit and avoid redundant clock device writes.
Now if ts->next_tick missed an update, we may spuriously miss a clock
reprog later as the nohz code is fooled by an obsolete next_tick value.
This is what happens here on a specific path: when we observe an
expired timer from the nohz update code on irq exit, we perform a soft
tick restart which simply fires the closest possible tick without
actually exiting the nohz mode and restoring a periodic state. But we
forget to update ts->next_tick accordingly.
As a result, after the next tick resulting from such soft tick restart,
the nohz code sees a stale value on ts->next_tick which doesn't match
the clock deadline that just expired. If that obsolete ts->next_tick
value happens to collide with the actual next tick deadline to be
scheduled, we may spuriously bypass the clock reprogramming. In the
worst case, the tick may never fire again.
Fix this with a ts->next_tick reset on soft tick restart.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed: Wanpeng Li <wanpeng.li@hotmail.com>
Acked-by: Rik van Riel <riel@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/1486485894-29173-1-git-send-email-fweisbec@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When the tick is stopped and an interrupt occurs afterward, we check on
that interrupt exit if the next tick needs to be rescheduled. If it
doesn't need any update, we don't want to do anything.
In order to check if the tick needs an update, we compare it against the
clockevent device deadline. Now that's a problem because the clockevent
device is at a lower level than the tick itself if it is implemented
on top of hrtimer.
Every hrtimer share this clockevent device. So comparing the next tick
deadline against the clockevent device deadline is wrong because the
device may be programmed for another hrtimer whose deadline collides
with the tick. As a result we may end up not reprogramming the tick
accidentally.
In a worst case scenario under full dynticks mode, the tick stops firing
as it is supposed to every 1hz, leaving /proc/stat stalled:
Task in a full dynticks CPU
----------------------------
* hrtimer A is queued 2 seconds ahead
* the tick is stopped, scheduled 1 second ahead
* tick fires 1 second later
* on tick exit, nohz schedules the tick 1 second ahead but sees
the clockevent device is already programmed to that deadline,
fooled by hrtimer A, the tick isn't rescheduled.
* hrtimer A is cancelled before its deadline
* tick never fires again until an interrupt happens...
In order to fix this, store the next tick deadline to the tick_sched
local structure and reuse that value later to check whether we need to
reprogram the clock after an interrupt.
On the other hand, ts->sleep_length still wants to know about the next
clock event and not just the tick, so we want to improve the related
comment to avoid confusion.
Reported-by: James Hartsock <hartsjc@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Reviewed-by: Wanpeng Li <wanpeng.li@hotmail.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Rik van Riel <riel@redhat.com>
Link: http://lkml.kernel.org/r/1483539124-5693-1-git-send-email-fweisbec@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
ktime is a union because the initial implementation stored the time in
scalar nanoseconds on 64 bit machine and in a endianess optimized timespec
variant for 32bit machines. The Y2038 cleanup removed the timespec variant
and switched everything to scalar nanoseconds. The union remained, but
become completely pointless.
Get rid of the union and just keep ktime_t as simple typedef of type s64.
The conversion was done with coccinelle and some manual mopping up.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
can_stop_full_tick() has no check for offline cpus. So it allows to stop
the tick on an offline cpu from the interrupt return path, which is wrong
and subsequently makes irq_work_needs_cpu() warn about being called for an
offline cpu.
Commit f7ea0fd639c2c4 ("tick: Don't invoke tick_nohz_stop_sched_tick() if
the cpu is offline") added prevention for can_stop_idle_tick(), but forgot
to do the same in can_stop_full_tick(). Add it.
[ tglx: Massaged changelog ]
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/1473245473-4463-1-git-send-email-wanpeng.li@hotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
tick_nohz_start_idle() is prevented to be called if the idle tick can't
be stopped since commit 1f3b0f8243cb934 ("tick/nohz: Optimize nohz idle
enter"). As a result, after suspend/resume the host machine, full dynticks
kvm guest will softlockup:
NMI watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:0]
Call Trace:
default_idle+0x31/0x1a0
arch_cpu_idle+0xf/0x20
default_idle_call+0x2a/0x50
cpu_startup_entry+0x39b/0x4d0
rest_init+0x138/0x140
? rest_init+0x5/0x140
start_kernel+0x4c1/0x4ce
? set_init_arg+0x55/0x55
? early_idt_handler_array+0x120/0x120
x86_64_start_reservations+0x24/0x26
x86_64_start_kernel+0x142/0x14f
In addition, cat /proc/stat | grep cpu in guest or host:
cpu 398 16 5049 15754 5490 0 1 46 0 0
cpu0 206 5 450 0 0 0 1 14 0 0
cpu1 81 0 3937 3149 1514 0 0 9 0 0
cpu2 45 6 332 6052 2243 0 0 11 0 0
cpu3 65 2 328 6552 1732 0 0 11 0 0
The idle and iowait states are weird 0 for cpu0(housekeeping).
The bug is present in both guest and host kernels, and they both have
cpu0's idle and iowait states issue, however, host kernel's suspend/resume
path etc will touch watchdog to avoid the softlockup.
- The watchdog will not be touched in tick_nohz_stop_idle path (need be
touched since the scheduler stall is expected) if idle_active flags are
not detected.
- The idle and iowait states will not be accounted when exit idle loop
(resched or interrupt) if idle start time and idle_active flags are
not set.
This patch fixes it by reverting commit 1f3b0f8243cb934 since can't stop
idle tick doesn't mean can't be idle.
Fixes: 1f3b0f8243cb934 ("tick/nohz: Optimize nohz idle enter")
Signed-off-by: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: Sanjeev Yadav<sanjeev.yadav@spreadtrum.com>
Cc: Gaurav Jindal<gaurav.jindal@spreadtrum.com>
Cc: stable@vger.kernel.org
Cc: kvm@vger.kernel.org
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lkml.kernel.org/r/1472798303-4154-1-git-send-email-wanpeng.li@hotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
tick_nohz_start_idle is called before checking whether the idle tick can be
stopped. If the tick cannot be stopped, calling tick_nohz_start_idle() is
pointless and just wasting CPU cycles.
Only invoke tick_nohz_start_idle() when can_stop_idle_tick() returns true. A
short one minute observation of the effect on ARM64 shows a reduction of calls
by 1.5% thus optimizing the idle entry sequence.
[tglx: Massaged changelog ]
Co-developed-by: Sanjeev Yadav<sanjeev.yadav@spreadtrum.com>
Signed-off-by: Gaurav Jindal<gaurav.jindal@spreadtrum.com>
Link: http://lkml.kernel.org/r/20160714120416.GB21099@gaurav.jindal@spreadtrum.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The wheel clock is stale when a CPU goes into a long idle sleep. This has the
side effect that timers which are queued end up in the outer wheel levels.
That results in coarser granularity.
To solve this, we keep track of the idle state and forward the wheel clock
whenever possible.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094342.512039360@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This was a failed attempt to optimize the timer expiry in idle, which was
disabled and never revisited. Remove the cruft.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Chris Mason <clm@fb.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: George Spelvin <linux@sciencehorizons.net>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20160704094342.431073782@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While reviewing another patch I noticed that kernel/time/tick-sched.c
had a charmingly (confusingly, annoyingly) rich set of variants for
spelling 'CPU':
cpu
cpus
CPU
CPUs
per CPU
per-CPU
per cpu
... sometimes these were mixed even within the same comment block!
Compress these variants down to a single consistent set of:
CPU
CPUs
per-CPU
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull scheduler updates from Ingo Molnar:
- massive CPU hotplug rework (Thomas Gleixner)
- improve migration fairness (Peter Zijlstra)
- CPU load calculation updates/cleanups (Yuyang Du)
- cpufreq updates (Steve Muckle)
- nohz optimizations (Frederic Weisbecker)
- switch_mm() micro-optimization on x86 (Andy Lutomirski)
- ... lots of other enhancements, fixes and cleanups.
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (66 commits)
ARM: Hide finish_arch_post_lock_switch() from modules
sched/core: Provide a tsk_nr_cpus_allowed() helper
sched/core: Use tsk_cpus_allowed() instead of accessing ->cpus_allowed
sched/loadavg: Fix loadavg artifacts on fully idle and on fully loaded systems
sched/fair: Correct unit of load_above_capacity
sched/fair: Clean up scale confusion
sched/nohz: Fix affine unpinned timers mess
sched/fair: Fix fairness issue on migration
sched/core: Kill sched_class::task_waking to clean up the migration logic
sched/fair: Prepare to fix fairness problems on migration
sched/fair: Move record_wakee()
sched/core: Fix comment typo in wake_q_add()
sched/core: Remove unused variable
sched: Make hrtick_notifier an explicit call
sched/fair: Make ilb_notifier an explicit call
sched/hotplug: Make activate() the last hotplug step
sched/hotplug: Move migration CPU_DYING to sched_cpu_dying()
sched/migration: Move CPU_ONLINE into scheduler state
sched/migration: Move calc_load_migrate() into CPU_DYING
sched/migration: Move prepare transition to SCHED_STARTING state
...
All the atomic operations have their arguments the wrong way around;
make atomic_fetch_or() consistent and flip them.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ticks can happen while the CPU is in dynticks-idle or dynticks-singletask
mode. In fact "nohz" or "dynticks" only mean that we exit the periodic
mode and we try to minimize the ticks as much as possible. The nohz
subsystem uses a confusing terminology with the internal state
"ts->tick_stopped" which is also available through its public interface
with tick_nohz_tick_stopped(). This is a misnomer as the tick is instead
reduced with the best effort rather than stopped. In the best case the
tick can indeed be actually stopped but there is no guarantee about that.
If a timer needs to fire one second later, a tick will fire while the
CPU is in nohz mode and this is a very common scenario.
Now this confusion happens to be a problem with CPU load updates:
cpu_load_update_active() doesn't handle nohz ticks correctly because it
assumes that ticks are completely stopped in nohz mode and that
cpu_load_update_active() can't be called in dynticks mode. When that
happens, the whole previous tickless load is ignored and the function
just records the load for the current tick, ignoring potentially long
idle periods behind.
In order to solve this, we could account the current load for the
previous nohz time but there is a risk that we account the load of a
task that got freshly enqueued for the whole nohz period.
So instead, lets record the dynticks load on nohz frame entry so we know
what to record in case of nohz ticks, then use this record to account
the tickless load on nohz ticks and nohz frame end.
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1460555812-25375-3-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The CPU load update related functions have a weak naming convention
currently, starting with update_cpu_load_*() which isn't ideal as
"update" is a very generic concept.
Since two of these functions are public already (and a third is to come)
that's enough to introduce a more conventional naming scheme. So let's
do the following rename instead:
update_cpu_load_*() -> cpu_load_update_*()
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1460555812-25375-2-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The tick dependency mask was intially unsigned long because this is the
type on which clear_bit() operates on and fetch_or() accepts it.
But now that we have atomic_fetch_or(), we can instead use
atomic_andnot() to clear the bit. This consolidates the type of our
tick dependency mask, reduce its size on structures and benefit from
possible architecture optimizations on atomic_t operations.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1458830281-4255-3-git-send-email-fweisbec@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Use the more common logging method with the eventual goal of removing
pr_warning altogether.
Miscellanea:
- Realign arguments
- Coalesce formats
- Add missing space between a few coalesced formats
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [kernel/power/suspend.c]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This changes several users of manual "on"/"off" parsing to use
strtobool.
Some side-effects:
- these uses will now parse y/n/1/0 meaningfully too
- the early_param uses will now bubble up parse errors
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Amitkumar Karwar <akarwar@marvell.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Joe Perches <joe@perches.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Nishant Sarmukadam <nishants@marvell.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Steve French <sfrench@samba.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of checking sched_clock_stable from the nohz subsystem to verify
its tick dependency, migrate it to the new mask in order to include it
to the all-in-one check.
Reviewed-by: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Instead of providing asynchronous checks for the nohz subsystem to verify
posix cpu timers tick dependency, migrate the latter to the new mask.
In order to keep track of the running timers and expose the tick
dependency accordingly, we must probe the timers queuing and dequeuing
on threads and process lists.
Unfortunately it implies both task and signal level dependencies. We
should be able to further optimize this and merge all that on the task
level dependency, at the cost of a bit of complexity and may be overhead.
Reviewed-by: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Instead of providing asynchronous checks for the nohz subsystem to verify
sched tick dependency, migrate sched to the new mask.
Everytime a task is enqueued or dequeued, we evaluate the state of the
tick dependency on top of the policy of the tasks in the runqueue, by
order of priority:
SCHED_DEADLINE: Need the tick in order to periodically check for runtime
SCHED_FIFO : Don't need the tick (no round-robin)
SCHED_RR : Need the tick if more than 1 task of the same priority
for round robin (simplified with checking if more than
one SCHED_RR task no matter what priority).
SCHED_NORMAL : Need the tick if more than 1 task for round-robin.
We could optimize that further with one flag per sched policy on the tick
dependency mask and perform only the checks relevant to the policy
concerned by an enqueue/dequeue operation.
Since the checks aren't based on the current task anymore, we could get
rid of the task switch hook but it's still needed for posix cpu
timers.
Reviewed-by: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Instead of providing asynchronous checks for the nohz subsystem to verify
perf event tick dependency, migrate perf to the new mask.
Perf needs the tick for two situations:
1) Freq events. We could set the tick dependency when those are
installed on a CPU context. But setting a global dependency on top of
the global freq events accounting is much easier. If people want that
to be optimized, we can still refine that on the per-CPU tick dependency
level. This patch dooesn't change the current behaviour anyway.
2) Throttled events: this is a per-cpu dependency.
Reviewed-by: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
The tick dependency is evaluated on every IRQ and context switch. This
consists is a batch of checks which determine whether it is safe to
stop the tick or not. These checks are often split in many details:
posix cpu timers, scheduler, sched clock, perf events.... each of which
are made of smaller details: posix cpu timer involves checking process
wide timers then thread wide timers. Perf involves checking freq events
then more per cpu details.
Checking these informations asynchronously every time we update the full
dynticks state bring avoidable overhead and a messy layout.
Let's introduce instead tick dependency masks: one for system wide
dependency (unstable sched clock, freq based perf events), one for CPU
wide dependency (sched, throttling perf events), and task/signal level
dependencies (posix cpu timers). The subsystems are responsible
for setting and clearing their dependency through a set of APIs that will
take care of concurrent dependency mask modifications and kick targets
to restart the relevant CPU tick whenever needed.
This new dependency engine stays beside the old one until all subsystems
having a tick dependency are converted to it.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
