Add the PERF_CPUM_SF_FULL_BLOCKS flag to process only sample-data-blocks that
have the block-full-indicator bit set. Sample-data-blocks that are partially
filled are discarded. Use this flag if the sampling buffer is likely to be
shared among perf events that use different sampling modes. In such
environments, flushing sample-data-blocks that are not completely filled, might
cause invalid-data-formats.
Setting PERF_CPUM_SF_FULL_BLOCKS prevents potentially invalid sampling data to
be processed but, in contrast, also discards valid samples in partially filled
sample-data-blocks. Note that sample-data-blocks might not become full for
small sampling frequencies or for workload that is scheduled for tiny intervals.
To sample with the PERF_CPUM_SF_FULL_BLOCKS flag, set the perf->attr.config1
to 0x0004. For example:
perf record -e cpum_sf/config=0xB000,config1=0x0004/
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Also support the diagnostic-sampling function in addition to the basic-sampling
function. Diagnostic-sampling data entries contain hardware model specific
sampling data and additional programs are required to analyze the data.
To deliver diagnostic-sampling, as well, as basis-sampling data entries to user
space, introduce support for sampling "raw data". If this particular perf
sampling type (PERF_SAMPLE_RAW) is used, sampling data entries are copied
to user space. External programs can then analyze these data.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Introduce the perf_exclude_event() function to filter perf samples
according to event->attr.exclude_* settings. During event initialization,
reset event exclude settings that are not supported.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The host-program-parameter (hpp) value of basic sample-data-entries designates
a SIE control block that is set by the LPP instruction in sie64a().
Non-zero values indicate guest samples, a value of zero indicates a host sample.
For perf samples, host and guest samples are distinguished using particular
PERF_MISC_* flags. The perf layer calls perf_misc_flags() to set the flags
based on the pt_regs content. For each sample-data-entry, the cpum_sf PMU
creates a pt_regs structure with the sample-data information. An additional
flag structure is added to easily distinguish between host and guest samples.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The trailer entry contains a timestamp of the time when the sample-data-block
became full. The timestamp specifies a TOD (time-of-day) value in either the
STCK or STCKE format.
Provide a helper function to return the TOD value depending on the setting of
time format indicator.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Ensure to reset the sample-data-block full indicator and the overflow counter
at the same time. This must be done atomically because the sampling hardware
is still active while full sample-data-block is processed.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Improve the sampling buffer allocation and add a function to reallocate and
increase the sampling buffer structure. The number of allocated buffer elements
(sample-data-blocks) are accounted. You can control the minimum and maximum
number these sample-data-blocks through the cpum_sfb_size kernel parameter.
The number hardware sample overflows (if any) are also accounted and stored
per perf event. During the PMU disable/enable calls, the accumulated overflow
counter is analyzed and, if necessary, the sampling buffer is dynamically
increased.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
HW, FW and Linux support is in a better shape now - let's reenable
pci bus probing per default.
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
allocated_pages sometimes are increased even if s390_dma_alloc fails
also this value is never decreased even if s390_dma_free is called.
This patch fixes these bugs.
Also remove the atomic64_t casts (the members are already of this type).
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
If we receive a notification that a pci function became unavailable we clean
up by removing the pci device. This can confuse the driver since the function
is already unaccessible. Improve this situation by setting an appropriate
error_state.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
If we remove a pci bus after receiving a hotplug notification we need
to check if the bus is actually present (creation of the pci bus
during an earlier notification may have been failed).
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Initialization and scanning of the pci bus is omitted on older
machines without pci support or if pci=off was specified. Remember
the fact that we ran without pci support and prevent further bus
scans during resume from hibernate or after receiving hotplug
notifications.
Reported-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Register a service level handler to report information about available
CPU-Measurement facilities.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Introduce reserve/release functions to share the sampling facility
between perf and oprofile.
Also improve error handling for the sampling facility support in perf.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The cpum_cf (counter facility) PMU does not support sampling events.
With cpum_sf (sampling facility), a PMU for sampling CPU cycles is
available.
Make cpum_sf the "default" PMU for PERF_COUNT_HW_CPU_CYCLES sampling
events but use the more precise cpum_cf PMU for non-sampling events.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Introduce a perf PMU, "cpum_sf", to support the CPU-Measurement
Sampling Facility. You can control the sampling facility through
this perf PMU interfaces. Perf sampling events are created for
hardware samples.
For details about the CPU-Measurement Sampling Facility, see
"The Load-Program-Parameter and the CPU-Measurement Facilities" (SA23-2260).
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Provide PMU event attributes for supported counters and export their symbolic
names to the sysfs "events" directory.
See the /sys/devices/cpum_cf/events/ directory for a list of available counters.
Note that you might require counter set authorizations for the LPAR to use them.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Extract and move the oprofile hwsampler data structures and interfaces to
the cpu_mf.h header file which contains common interface definitions
for the various CPU-measurement facilities. This change is necessary for
a new perf PMU.
Few interface names have been revised to fit to the latest CPU-measurement
facilities documentation. Also declare the data structures as __packed and
correct checkpatch findings.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add SCLP console detect functions to encapsulate detection of SCLP console
capabilities, for example, VT220 support. Reuse the sclp_send/receive masks
that were stored by the most recent sclp_set_event_mask() call to prevent
unnecessary SCLP calls.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Reviewed-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The return code of the __put_user call to store the rt_sigreturn
system call to the user stack if not properly checked, the err
variable is only checked before to the __put_user. Use an if
statement instead.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Remove the embedded struct cpu from struct pcpu and replace it with a
pointer instead. The struct cpu now gets allocated when a new cpu gets
detected.
The size of the pcpu_devices array (NR_CPUS * sizeof(struct pcpu)) gets
reduced by nearly 120KB.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
It is less expensive to update control registers 0 and 2 with two
individual stctg/lctlg instructions as with a single one that spans
control register 0, 1 and 2.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The user_enable_single_step() and user_disable_sindle_step() functions
are always called on the inferior, never for the currently active
process. Remove the unnecessary check for the current process and
the update_cr_regs() call from the enable/disable functions.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
If the per cpu ec_mask bit of the receiving cpu is already set there is
no need to send an ipi, since a different cpu has already sent an ipi
and the receiving cpu has not yet executed the external call ipi handler.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Various improvements and bugfixes in the signal processor handling.
Document kvm support for diagnose (s390 hypercalls). And last but
not least, fix a bug in the s390 ioeventfd backend that was causing
us grief in scenarios with 4G+ memory.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQIcBAABAgAGBQJSqLJhAAoJEN7Pa5PG8C+vfdgP/3TzhJDOlQQBUSrmgE7TzaXR
qHXMVDsWRzrpkrXXjLnHrmwTl5+d5y6yz4TQGhpDEQsMSzTHtv0xq+2qdED92P5P
L2RNTBFeilRMke1j71uWYszJBiiEoyePg1Cj0rJ84fGJobc6NgXIjX+pftvtsMpC
Xid54/m3DmBKJBHIIQKz2EwUHc3/TQj3wnIPjK5f6Lb7d231131fn5heEQj9TVCh
Vc2Ei/c/KGf8afgzPtA29zIQX8y2KuPcbh5ouGI9bHIgBuLN9FbYV3V9CsDNc2lM
rKSCeXwExdaZbtQ/kStbIKRFLR6D7JFSjUZORGgOq03wMvGUztckJ1WhbAw+ufef
vPDtKY4h9Jl1tEuErmnuecspJafjrsY3q1d1quxOOl+anU6CfX8DZ/4xbXtU8XYd
CRHEsxvJNXKPge4jpCmukJP8iJ4HaGdZYeiy9mdNEAhQZhmeuPdIzt+DtJjNZpup
C1ofz3a7mz5c+lTMWC2xOwLmqpPCioIqYUSKYmzWimWBXmpRqoJtOmZAvT+BqDY2
+GTTk4JJoj4vhxQNRFROuvZ710H/NNF/Nm8Mex776IDXg3vNuPuxu9yFtf8k8fiY
UcIZ8Y8PEYhpm4VN/fdFM6pwTvHqFHtAhqaofp3Tb6wE0JCiVZ7b2E5jJuIYE6wS
EP+r1TCuGi5OH02doEKH
=/dj0
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-20131211' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-next
Some further s390 patches for kvm-next.
Various improvements and bugfixes in the signal processor handling.
Document kvm support for diagnose (s390 hypercalls). And last but
not least, fix a bug in the s390 ioeventfd backend that was causing
us grief in scenarios with 4G+ memory.
The diagnose 500 subcode 3 contains the 32 bit subchannel id in bits 32-63
(counting from the left). As for other I/O instructions, bits 0-31 should be
ignored and thus not be passed to kvm_io_bus_write_cookie().
This fixes a bug where the guest passed non-zero bits 0-31 which the
host tried to interpret, leading to ioeventfd notification failures.
Cc: stable@vger.kernel.org
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Just like the RESTART order, the START order also has to report BUSY
while a STOP request is pending, to avoid that the START might be
ignored due to a race condition between the STOP and the START order.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
When SIGP RESTART detected an illegal CPU address, there is no need to
drop to userspace, we can return CC3 to the guest directly instead.
Also renamed __sigp_restart() to sigp_check_callable() (since this
is a better description of what the function is really doing) and
moved a string specific to RESTART to the calling place instead, so
that this function gets usable by other SIGP orders, too.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
This patch adds the missing SIGP order "conditional emergency
signal" by calling the "emergency signal" SIGP handler if the
required conditions are met.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
We've got a helper function for setting the condition code now,
so let's use it in the SIGP handler, too.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Pull s390 fixes from Martin Schwidefsky:
"One patch to increase the number of possible CPUs to 256, with the
latest machine a single LPAR can have up to 101 CPUs. Plus a number
of bug fixes, the clock_gettime patch fixes a regression added in the
3.13 merge window"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/time,vdso: fix clock_gettime for CLOCK_MONOTONIC
s390/vdso: ectg gettime support for CLOCK_THREAD_CPUTIME_ID
s390/vdso: fix access-list entry initialization
s390: increase CONFIG_NR_CPUS limit
s390/smp,sclp: fix size of sclp_cpu_info structure
s390/sclp: replace uninitialized early_event_mask_sccb variable with sccb_early
s390/dasd: fix memory leak caused by dangling references to request_queue
Pull crypto fixes from Herbert Xu:
"This push fixes a number of crashes triggered by a previous crypto
self-test update. It also fixes a build problem in the caam driver,
as well as a concurrency issue in s390.
Finally there is a pair of fixes to bugs in the crypto scatterwalk
code and authenc that may lead to crashes"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: testmgr - fix sglen in test_aead for case 'dst != src'
crypto: talitos - fix aead sglen for case 'dst != src'
crypto: caam - fix aead sglen for case 'dst != src'
crypto: ccm - Fix handling of zero plaintext when computing mac
crypto: s390 - Fix aes-xts parameter corruption
crypto: talitos - corrrectly handle zero-length assoc data
crypto: scatterwalk - Set the chain pointer indication bit
crypto: authenc - Find proper IV address in ablkcipher callback
crypto: caam - Add missing Job Ring include
With git commit 79c74ecbebf76732f91b82a62ce7fc8a88326962
"s390/time,vdso: convert to the new update_vsyscall interface"
the new update_vsyscall function already does the sum of xtime
and wall_to_monotonic. The old update_vsyscall function only
copied the wall_to_monotonic offset. The vdso code needs to be
modified to take this into consideration.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The code to use the ECTG instruction to calculate the cputime for the
current thread is currently used only for the per-thread CPU-clock
with the clockid -2 (PID=0, VIRT=1). Use the same code for the clockid
CLOCK_THREAD_CPUTIME_ID to speed up the more common clockid as well.
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The access-list entry is supposed to have the fetch-only bit set, however
a reserved bit got set instead.
Userspace isn't able to write to the page anyway since the accessed page
has the read-only bit set. So this saves us only for bad surprises in the
future if the reserved bit gets used.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
In current models, maximum number of active cores is 101.
[heiko.carstens@de.ibm.com]: Xose's patch increased the maximum possible
value of CONFIG_NR_CPUS to 101. I changed this to 256 instead.
Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
struct sclp_cpu_info contains entries only for 255 cpus, while the new
smp fallback sigp detection code will fill up to 256 entries.
Even though there is no machine available which has 256 cpus and where
in addition the fallback sigp cpu detection code will be used we better
fix this, to prevent out of bound accesses.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Pull s390 updates from Martin Schwidefsky:
"One performance improvement and a few bug fixes. Two of the fixes
deal with the clock related problems we have seen on recent kernels"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/mm: handle asce-type exceptions as normal page fault
s390,time: revert direct ktime path for s390 clockevent device
s390/time,vdso: convert to the new update_vsyscall interface
s390/uaccess: add missing page table walk range check
s390/mm: optimize copy_page
s390/dasd: validate request size before building CCW/TCW request
s390/signal: always restore saved runtime instrumentation psw bit
Some s390 crypto algorithms incorrectly use the crypto_tfm structure to
store private data. As the tfm can be shared among multiple threads, this
can result in data corruption.
This patch fixes aes-xts by moving the xts and pcc parameter blocks from
the tfm onto the stack (48 + 96 bytes).
Cc: stable@vger.kernel.org
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The function kvm_s390_inject_sigp_stop() as been unused since the
removal of the old mmu reload code and thus can be removed safely.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The STORE STATUS AT ADDRESS order of SIGP was still missing.
Now it is supported, using the common kvm_s390_store_status()
function.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The diagnose code to be used is the contents of the base register (if not
zero), plus the displacement. The current code ignores the base register
contents. So let's fix that...
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Only the most 7 significant bytes of the clock comparator must be
saved to the status area, and the byte at offset 304 has to be zero.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The SIGP order STOP_AND_STORE_STATUS is defined to stop a CPU and store
its status. However, we only stored the status if the CPU was still
running, so make sure that the status is now also stored if the CPU was
already stopped. This fixes the problem that the CPU information was
not stored correctly in kdump files, rendering them unreadable.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The EQBS and SQBS instructions do not set CC3 for invalid channels, but
should throw an operation exception instead when not available. Thus they
should not be handled by the handle_io_inst() wrapper but drop to userspace
instead (which will then inject the operation exception).
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The TPI handler currently uses vcpu->run->s.regs.crs[6] to get the current
value of CR6. I think this is wrong, because vcpu->run->s.regs.crs is
only updated when kvm_arch_vcpu_ioctl_run() drops back to userspace.
So let's change the TPI handler to use vcpu->arch.sie_block->gcr[6] instead.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
VIRTIODESCSPACE is completely unused nowadays and thus can be removed
without any problems.
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
The SIE_INTERCEPT_UCONTROL can be removed by moving the related code
from kvm_arch_vcpu_ioctl_run() to vcpu_post_run().
Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Git commit 9e34f2686bb088b211b6cac8772e1f644c6180f8
"s390/mm,tlb: tlb flush on page table upgrade fixup" removed the
exception handler for the asce-type exception. This is incorrect
as the user-copy with MVCOS can cause asce-type exceptions in
the kernel if a user pointer is too large. Those need to be
handled with do_no_context to branch to the fixup in the
user-copy code.
The simplest fix for this problem is to call do_dat_exception for
asce-type excpetions, as there is no vma for the address the code
will handle the exception correctly.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
