29867 Commits

Author SHA1 Message Date
Anton Vorontsov
8cb1f567f4 ide: Platform IDE driver
This is now very similar to pata_platform.c, they both use
same platform data structure and same resources.

To achieve that, byte_lanes_swapping platform data variable
and platform specified iops removed from that driver. It's fine,
since those were never used anyway.

pata_platform and ide_platform are carrying same driver names,
to easily switch between these drivers, without need to touch
platform code.

Bart:
- build fix from Andrew Morton <akpm@linux-foundation.org>

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Vitaly Bordug <vitb@kernel.crashing.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11 23:53:58 +02:00
Sergei Shtylyov
b4e44369a3 hpt366: MWDMA filter for SATA cards (take 2)
The Marvell bridge chips used on HighPoint SATA cards do not seem to support
the MWDMA modes (at least that could be seen in their so-called drivers :-),
so the driver needs to account for this -- to achieve this:

- add mdma_filter() method from the original patch by Bartlomiej Zolnierkiewicz
  with his consent;

- install the method for all chips to only return empty mask if a SATA drive
  is detected on HPT372{AN]/374 chips...

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11 23:53:58 +02:00
Shane Huang
7cfa7168f7 atiixp: SB700 contains more than one IDE channel
SB700 supports one physical IDE channel, but SB700 SATA controller
supports combined mode.  When the SATA combined mode is enabled,
two SATA ports (port4 and port5) share one IDE channel from IDE
controller, and PATA will share the other IDE channel.

Our previous patch adding SB700 IDE device ID only supports one
IDE channel, which contains bug.  The attached patch fixes the bug.

Signed-off-by: "Shane Huang" <Shane.Huang@amd.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2007-10-11 23:53:58 +02:00
Richard Purdie
c3f8f65046 backlight: Convert corgi backlight driver into a more generic driver
Convert the corgi backlight driver to a more generic version
so it can be reused by other code rather than being Zaurus/PXA
specific.

Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-10-11 22:24:13 +01:00
Haavard Skinnemoen
18f65c793a backlight: Add Samsung LTV350QV LCD driver
This patch adds support for powering on and off the Samsung LTV350QV LCD
panel via SPI.  The driver responds to framebuffer power management, it
powers off the panel on reboot/halt/poweroff.  It can also be controlled
through sysfs.  The panel is powered up when the module is loaded, and off
when the module is unloaded.  Verified on AVR32 STK1000.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-10-11 22:24:12 +01:00
Jesper Juhl
0b75f2dfa2 backlight: Fix cr_bllcd allocations and error paths
After fixing the too small memory allocation in cr_backlight_probe()
from drivers/video/backlight/cr_bllcd.c
(commit e3bbb3f05339de438faf54124f25c92e6fe4ac2e) I noticed that the
Coverity checker also thought there were a few memory leaks in there.
I took a closer look and confirmed that there were indeed several
leaks.

At the start of the function we allocate storage for a
'struct cr_panel' and store the pointer in a variable named 'crp'.

Then we call pci_get_device() and pci_read_config_byte() and if
either of them fail we return without freeing the memory allocated
for the 'struct cr_panel'. These two leaks are easy to fix since we
don't even use 'crp' for anything up to this point, so I simply
moved the allocation further down in the function so it only happens
just before we actually need it.

A bit further down we call backlight_device_register() and store the
result in 'crp->cr_backlight_device'. In case of error we return
'crp->cr_backlight_device' from the function, thus leaking 'crp'
itself. The same thing happens with the call to lcd_device_register().
To fix these two leaks I declare two new pointers to hold the return
values, so that in case of error we can return the pointer (as before)
but without leaking 'crp'.

This version of the patch also adds missing
backlight_device_unregister() / lcd_device_unregister() / pci_dev_put()
calls to error paths.
  Thanks to Richard Purdie <rpurdie@rpsys.net> for noticing.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-10-11 22:24:12 +01:00
Adrian Bunk
0ad90efde2 backlight/leds: Make two structs static
This patch makes two needlessly global structs static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-10-11 22:24:12 +01:00
Yoichi Yuasa
4276fd7349 leds: Update Cobalt Qube series front LED support
Update Cobalt Qube series front LED support.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-10-11 22:24:00 +01:00
Yoichi Yuasa
97da7aaf46 leds: Add Cobalt Raq series LEDs support
Add Cobalt Raq series LEDs support.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-10-11 22:24:00 +01:00
Yoichi Yuasa
f3b6b6cd00 leds: Rename leds-cobalt driver
The leds-cobalt driver only supports the Coable Qube series
(not included in Cobalt Raq series).
Rename the driver and update Kconfig/Makefile.

Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Acked-by: Florian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: Richard Purdie <rpurdie@rpsys.net>
2007-10-11 22:24:00 +01:00
Nicolas Pitre
019a5f56ec mmc: don't use weight32()
Using weight32() to determine if a value is a power of 2 is a rather
heavi weight solution.  The classic idiom is (x & (x - 1)) == 0, but
the kernel already provide a is_power_of_2 function for it.

Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-10-11 19:09:08 +02:00
Josh Boyer
0a2cdd88f0 Merge branch 'virtex-for-2.6.24' of git://git.secretlab.ca/git/linux-2.6-virtex into for-2.6.24-4xx 2007-10-11 07:45:20 -05:00
Stephen Rothwell
8251b4c481 [POWERPC] iSeries: Move viodasd probing
This way we only have entries in the device tree for disks that actually
exist.  A slight complication is that disks may be attached to LPARs
at runtime.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-11 20:40:48 +10:00
Stephen Rothwell
7465ce0db3 [POWERPC] iSeries: Move detection of virtual tapes
Now we will only have entries in the device tree for the actual existing
devices (including their OS/400 properties).  This way viotape.c gets
all the information about the devices from the device tree.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-11 20:40:47 +10:00
Stephen Rothwell
b833b481c1 [POWERPC] iSeries: Move detection of virtual cdroms
Now we will only have entries in the device tree for the actual existing
devices (including their OS/400 properties).  This way viocd.c gets all
the information about the devices from the device tree.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-11 20:40:47 +10:00
Stephen Rothwell
1670b2b271 [POWERPC] Remove iSeries_vio_dev
It was only being used to carry around dma_iommu_ops and vio_iommu_table
which we can use directly instead.  This also means that vio_bus_device
doesn't need to refer to them either.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-11 20:40:45 +10:00
Stephen Rothwell
73be7d5267 [POWERPC] iSeries: Simplify viocd initialisation
We don't need to keep a lump of dma coherent memory around for the life
of the module.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-11 20:40:45 +10:00
Andrew Morton
d71fce6b93 [QETH]: fix qeth_main.c
drivers/s390/net/qeth_main.c: In function 'qeth_hard_header_parse':
drivers/s390/net/qeth_main.c:6584: error: 'dev' undeclared (first use in this function)
drivers/s390/net/qeth_main.c:6584: error: (Each undeclared identifier is reported only once
drivers/s390/net/qeth_main.c:6584: error: for each function it appears in.)

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-11 02:44:23 -07:00
Thomas Gleixner
fb9aa6f1d4 i386: move pci
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 11:16:36 +02:00
Denis V. Lunev
cd40b7d398 [NET]: make netlink user -> kernel interface synchronious
This patch make processing netlink user -> kernel messages synchronious.
This change was inspired by the talk with Alexey Kuznetsov about current
netlink messages processing. He says that he was badly wrong when introduced 
asynchronious user -> kernel communication.

The call netlink_unicast is the only path to send message to the kernel
netlink socket. But, unfortunately, it is also used to send data to the
user.

Before this change the user message has been attached to the socket queue
and sk->sk_data_ready was called. The process has been blocked until all
pending messages were processed. The bad thing is that this processing
may occur in the arbitrary process context.

This patch changes nlk->data_ready callback to get 1 skb and force packet
processing right in the netlink_unicast.

Kernel -> user path in netlink_unicast remains untouched.

EINTR processing for in netlink_run_queue was changed. It forces rtnl_lock
drop, but the process remains in the cycle until the message will be fully
processed. So, there is no need to use this kludges now.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 21:15:29 -07:00
Matt Carlson
414c66e00e [TG3]: Update version to 3.83
Update to version 3.83.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 18:03:56 -07:00
Matt Carlson
0527ba358a [TG3]: WOL defaults
This patch enables WOL by default if out-of-box WOL is enabled in the
NVRAM.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 18:03:30 -07:00
Matt Carlson
9936bcf68a [TG3]: Add 5761 support
This patch adds rest of the miscellaneous code required to support the
5761.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 18:03:07 -07:00
Matt Carlson
0d3031d9e6 [TG3]: Add 5761 APE support
This patch adds support for the new APE block, present in 5761 chips.
APE stands for Application Processing Engine.  The primary function of
the APE is to process manageability traffic, such as ASF.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 18:02:43 -07:00
Matt Carlson
6b91fa0279 [TG3]: Add new 5761 NVRAM decode routines
This patch adds a new 5761-specific NVRAM strapping decode routine.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 18:01:09 -07:00
Stephen Hemminger
227b60f510 [INET]: local port range robustness
Expansion of original idea from Denis V. Lunev <den@openvz.org>

Add robustness and locking to the local_port_range sysctl.
1. Enforce that low < high when setting.
2. Use seqlock to ensure atomic update.

The locking might seem like overkill, but there are
cases where sysadmin might want to change value in the
middle of a DoS attack.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 17:30:46 -07:00
Michael Chan
32d1316b91 [BNX2]: Update version to 1.6.7.
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:58 -07:00
Michael Chan
846f5c622f [BNX2]: Fix default WoL setting.
Change the default WoL setting to match the NVRAM's setting.  It
always defaulted to WoL disabled before and caused a lot of confusion
for users.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:57 -07:00
Michael Chan
489310a440 [BNX2]: Fix remote PHY media detection problems.
The remote PHY media type and link status can change between
->probe() and ->open().  For correct operation, we need to get the
new status again during ->open().

The ethtool link test and loopback test are also fixed to work with
remote PHY.  PHY loopback is simply skipped when remote PHY is
present.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-10-10 16:55:57 -07:00
Jan Glauber
5265eeb2b0 [CRYPTO] sha: Add header file for SHA definitions
There are currently several SHA implementations that all define their own
initialization vectors and size values. Since this values are idential
move them to a header file under include/crypto.

Signed-off-by: Jan Glauber <jang@de.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-10 16:55:50 -07:00
Sebastian Siewior
ad5d27899f [CRYPTO] sha: Load the SHA[1|256] module by an alias
Loading the crypto algorithm by the alias instead of by module directly
has the advantage that all possible implementations of this algorithm
are loaded automatically and the crypto API can choose the best one
depending on its priority.

Additionally it ensures that the generic implementation as well as the
HW driver (if available) is loaded in case the HW driver needs the
generic version as fallback in corner cases.

Also remove the probe for sha1 in padlock's init code.

Quote from Herbert:
  The probe is actually pointless since we can always probe when
  the algorithm is actually used which does not lead to dead-locks
  like this.

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-10 16:55:50 -07:00
Sebastian Siewior
f8246af005 [CRYPTO] aes: Rename aes to aes-generic
Loading the crypto algorithm by the alias instead of by module directly
has the advantage that all possible implementations of this algorithm
are loaded automatically and the crypto API can choose the best one
depending on its priority.

Additionally it ensures that the generic implementation as well as the
HW driver (if available) is loaded in case the HW driver needs the
generic version as fallback in corner cases.

Signed-off-by: Sebastian Siewior <sebastian@breakpoint.cc>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-10 16:55:49 -07:00
Adrian Bunk
44db25ca12 [CRYPTO] drivers/Kconfig: Remove "default m"s
Hardware drivers shouldn't default to m.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2007-10-10 16:55:37 -07:00
Roland Dreier
59e90b2d22 ibm_emac: Convert to use napi_struct independent of struct net_device
Commit da3dedd9 ("[NET]: Make NAPI polling independent of struct
net_device objects.") changed the interface to NAPI polling.  Fix up
the ibm_newemac driver so that it works with this new interface.  This
is actually a nice cleanup because ibm_newemac is one of the drivers
that wants to have multiple NAPI structures for a single net_device.

Compile-tested only as I don't have a system that uses the ibm_newemac
driver.  This conversion the conversion for the ibm_emac driver that
was tested on real PowerPC 440SPe hardware.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:55:32 -07:00
Roland Dreier
61ba5b3c14 ibm_new_emac: Nuke SET_MODULE_OWNER() use
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:55:31 -07:00
Roland Dreier
bfe13f54f5 ibm_emac: Convert to use napi_struct independent of struct net_device
Commit da3dedd9 ("[NET]: Make NAPI polling independent of struct
net_device objects.") changed the interface to NAPI polling.  Fix up
the ibm_emac driver so that it works with this new interface.  This is
actually a nice cleanup because ibm_emac is one of the drivers that
wants to have multiple NAPI structures for a single net_device.

Tested with the internal MAC of a PowerPC 440SPe SoC with an AMCC
'Yucca' evaluation board.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:55:31 -07:00
Roland Dreier
9153f66a5b IPoIB: Fix unused variable warning
The conversion to use netdevice internal stats left an unused variable
in ipoib_neigh_free(), since there's no longer any reason to get
netdev_priv() in order to increment dropped packets.  Delete the
unused priv variable.

Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:55:30 -07:00
Mark Brown
f2cade1337 natsemi: Use NATSEMI_TIMER_FREQ consistently
The natsemi driver has a define NATSEMI_TIMER_FREQ which looks like it
controls the normal frequency of the chip poll timer but in fact only
takes effect for the first run of the timer.  Adjust the value of the
define to match that used by the timer and use the define consistently.

Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:55:29 -07:00
Stephen Hemminger
9265fabf0d cxgb3 sparse warning fixes
Fix warnings from sparse related to shadowed variables and routines
that should be declared static.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:55:29 -07:00
Stephen Hemminger
33a85aa1c9 chelsio: sparse warning fixes (old cxgb2)
Fix problems detected by sparse:
1. whole chunk of MAC code was for defined and never used
2. hook for running ext intr in workqueue wasn't being used

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:55:28 -07:00
Jan-Bernd Themann
3bf76b8160 ehea: use kernel event queue
eHEA recovery and DLPAR functions are called seldomly. The eHEA workqueues
are replaced by the kernel event queue.

Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:55:27 -07:00
Stephen Hemminger
ddfce6bb43 network drivers: sparse warning fixes
Fix some of the easy warnings in network device drivers.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:55:27 -07:00
Stephen Hemminger
43b7c451a0 s2io: sparse warnings fix (rev2)
Fix warnings from sparse checker about shadowed definition and improperly
formatted ethtool_strings.

Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:55:26 -07:00
Auke Kok
309af40b5f e1000e: restore flow control settings properly
After a cable unplug the forced flow control settings were lost
accidentally and the flow control settings fell back to the default
EEPROM determined values. This breaks for people who want to
run without fc enabled - after a cable reset the driver would
refuse to run with fc disabled.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:55:25 -07:00
Auke Kok
4e6c709c5a e1000e: Simple optimizations in e1000_xmit_frame
After an e1000 patch from Krishna Kumar <krkumar2@in.ibm.com>.

Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:55:25 -07:00
Krishna Kumar
6d1e3aa7bd e1000: Simple optimizations in e1000_xmit_frame
Some simple optimizations in e1000_xmit_frame.

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-10 16:55:24 -07:00
Holger Schurig
04799fae8e [PATCH] libertas: let get nick return what set nick has set
Make the get-nickname wireless extension actually work. Before
this patch, I could do "iwconfig eth1 nick BLAH" but "iwconfig
eth1" would have still showed "MRVL-USB8388" to me. Hey, and that
was wrong anyway, I'm on a CF card, not on USB :-)

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-By: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:22 -07:00
Holger Schurig
cc32613792 [PATCH] libertas: remove one superfluous include
This makes scripts/checkincludes.pl happy.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:22 -07:00
Holger Schurig
e56188ac41 [PATCH] libertas: clean up scan debug messages
* make scan debug output cleaner
* change some LBS_DEB_ASSOC messages to LBS_DEB_SCAN, which is more correct
* move helper functions together
* print function return value in the tracing code at one central location

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Acked-By: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:21 -07:00
Holger Schurig
314a886f08 [PATCH] libertas: fix "warning: Using plain integer as NULL pointer" sparse warnings
This fixes three "warning: Using plain integer as NULL pointer"
sparse warnings.

Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-10-10 16:55:20 -07:00