802727 Commits

Author SHA1 Message Date
Andrew Lunn
3f67219813 net: bridge: Clear offload_fwd_mark when passing frame up bridge interface.
[ Upstream commit fbb3abdf2223cd0dfc07de85fe5a43ba7f435bdf ]

It is possible to stack bridges on top of each other. Consider the
following which makes use of an Ethernet switch:

       br1
     /    \
    /      \
   /        \
 br0.11    wlan0
   |
   br0
 /  |  \
p1  p2  p3

br0 is offloaded to the switch. Above br0 is a vlan interface, for
vlan 11. This vlan interface is then a slave of br1. br1 also has a
wireless interface as a slave. This setup trunks wireless lan traffic
over the copper network inside a VLAN.

A frame received on p1 which is passed up to the bridge has the
skb->offload_fwd_mark flag set to true, indicating that the switch has
dealt with forwarding the frame out ports p2 and p3 as needed. This
flag instructs the software bridge it does not need to pass the frame
back down again. However, the flag is not getting reset when the frame
is passed upwards. As a result br1 sees the flag, wrongly interprets
it, and fails to forward the frame to wlan0.

When passing a frame upwards, clear the flag. This is the Rx
equivalent of br_switchdev_frame_unmark() in br_dev_xmit().

Fixes: f1c2eddf4cb6 ("bridge: switchdev: Use an helper to clear forward mark")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20220518005840.771575-1-andrew@lunn.ch
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25 08:41:20 +02:00
Kevin Mitchell
0236adfb09 igb: skip phy status check where unavailable
[ Upstream commit 942d2ad5d2e0df758a645ddfadffde2795322728 ]

igb_read_phy_reg() will silently return, leaving phy_data untouched, if
hw->ops.read_reg isn't set. Depending on the uninitialized value of
phy_data, this led to the phy status check either succeeding immediately
or looping continuously for 2 seconds before emitting a noisy err-level
timeout. This message went out to the console even though there was no
actual problem.

Instead, first check if there is read_reg function pointer. If not,
proceed without trying to check the phy status register.

Fixes: b72f3f72005d ("igb: When GbE link up, wait for Remote receiver status condition")
Signed-off-by: Kevin Mitchell <kevmitch@arista.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25 08:41:20 +02:00
Ard Biesheuvel
a7e49f1a81 ARM: 9197/1: spectre-bhb: fix loop8 sequence for Thumb2
[ Upstream commit 3cfb3019979666bdf33a1010147363cf05e0f17b ]

In Thumb2, 'b . + 4' produces a branch instruction that uses a narrow
encoding, and so it does not jump to the following instruction as
expected. So use W(b) instead.

Fixes: 6c7cb60bff7a ("ARM: fix Thumb2 regression with Spectre BHB")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25 08:41:20 +02:00
Ard Biesheuvel
772172697f ARM: 9196/1: spectre-bhb: enable for Cortex-A15
[ Upstream commit 0dc14aa94ccd8ba35eb17a0f9b123d1566efd39e ]

The Spectre-BHB mitigations were inadvertently left disabled for
Cortex-A15, due to the fact that cpu_v7_bugs_init() is not called in
that case. So fix that.

Fixes: b9baf5c8c5c3 ("ARM: Spectre-BHB workaround")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25 08:41:20 +02:00
Jiasheng Jiang
afa5fe031c net: af_key: add check for pfkey_broadcast in function pfkey_process
[ Upstream commit 4dc2a5a8f6754492180741facf2a8787f2c415d7 ]

If skb_clone() returns null pointer, pfkey_broadcast() will
return error.
Therefore, it should be better to check the return value of
pfkey_broadcast() and return error if fails.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25 08:41:20 +02:00
Duoming Zhou
732acfaa2c NFC: nci: fix sleep in atomic context bugs caused by nci_skb_alloc
[ Upstream commit 23dd4581350d4ffa23d58976ec46408f8f4c1e16 ]

There are sleep in atomic context bugs when the request to secure
element of st-nci is timeout. The root cause is that nci_skb_alloc
with GFP_KERNEL parameter is called in st_nci_se_wt_timeout which is
a timer handler. The call paths that could trigger bugs are shown below:

    (interrupt context 1)
st_nci_se_wt_timeout
  nci_hci_send_event
    nci_hci_send_data
      nci_skb_alloc(..., GFP_KERNEL) //may sleep

   (interrupt context 2)
st_nci_se_wt_timeout
  nci_hci_send_event
    nci_hci_send_data
      nci_send_data
        nci_queue_tx_data_frags
          nci_skb_alloc(..., GFP_KERNEL) //may sleep

This patch changes allocation mode of nci_skb_alloc from GFP_KERNEL to
GFP_ATOMIC in order to prevent atomic context sleeping. The GFP_ATOMIC
flag makes memory allocation operation could be used in atomic context.

Fixes: ed06aeefdac3 ("nfc: st-nci: Rename st21nfcb to st-nci")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220517012530.75714-1-duoming@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25 08:41:20 +02:00
Christophe JAILLET
e5f273c537 net/qla3xxx: Fix a test in ql_reset_work()
[ Upstream commit 5361448e45fac6fb96738df748229432a62d78b6 ]

test_bit() tests if one bit is set or not.
Here the logic seems to check of bit QL_RESET_PER_SCSI (i.e. 4) OR bit
QL_RESET_START (i.e. 3) is set.

In fact, it checks if bit 7 (4 | 3 = 7) is set, that is to say
QL_ADAPTER_UP.

This looks harmless, because this bit is likely be set, and when the
ql_reset_work() delayed work is scheduled in ql3xxx_isr() (the only place
that schedule this work), QL_RESET_START or QL_RESET_PER_SCSI is set.

This has been spotted by smatch.

Fixes: 5a4faa873782 ("[PATCH] qla3xxx NIC driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/80e73e33f390001d9c0140ffa9baddf6466a41a2.1652637337.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25 08:41:20 +02:00
Codrin Ciubotariu
b79bc9f277 clk: at91: generated: consider range when calculating best rate
[ Upstream commit d0031e6fbed955ff8d5f5bbc8fe7382482559cec ]

clk_generated_best_diff() helps in finding the parent and the divisor to
compute a rate closest to the required one. However, it doesn't take into
account the request's range for the new rate. Make sure the new rate
is within the required range.

Fixes: 8a8f4bf0c480 ("clk: at91: clk-generated: create function to find best_diff")
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220413071318.244912-1-codrin.ciubotariu@microchip.com
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25 08:41:20 +02:00
Zixuan Fu
5fd9a74bf0 net: vmxnet3: fix possible NULL pointer dereference in vmxnet3_rq_cleanup()
[ Upstream commit edf410cb74dc612fd47ef5be319c5a0bcd6e6ccd ]

In vmxnet3_rq_create(), when dma_alloc_coherent() fails,
vmxnet3_rq_destroy() is called. It sets rq->rx_ring[i].base to NULL. Then
vmxnet3_rq_create() returns an error to its callers mxnet3_rq_create_all()
-> vmxnet3_change_mtu(). Then vmxnet3_change_mtu() calls
vmxnet3_force_close() -> dev_close() in error handling code. And the driver
calls vmxnet3_close() -> vmxnet3_quiesce_dev() -> vmxnet3_rq_cleanup_all()
-> vmxnet3_rq_cleanup(). In vmxnet3_rq_cleanup(),
rq->rx_ring[ring_idx].base is accessed, but this variable is NULL, causing
a NULL pointer dereference.

To fix this possible bug, an if statement is added to check whether
rq->rx_ring[0].base is NULL in vmxnet3_rq_cleanup() and exit early if so.

The error log in our fault-injection testing is shown as follows:

[   65.220135] BUG: kernel NULL pointer dereference, address: 0000000000000008
...
[   65.222633] RIP: 0010:vmxnet3_rq_cleanup_all+0x396/0x4e0 [vmxnet3]
...
[   65.227977] Call Trace:
...
[   65.228262]  vmxnet3_quiesce_dev+0x80f/0x8a0 [vmxnet3]
[   65.228580]  vmxnet3_close+0x2c4/0x3f0 [vmxnet3]
[   65.228866]  __dev_close_many+0x288/0x350
[   65.229607]  dev_close_many+0xa4/0x480
[   65.231124]  dev_close+0x138/0x230
[   65.231933]  vmxnet3_force_close+0x1f0/0x240 [vmxnet3]
[   65.232248]  vmxnet3_change_mtu+0x75d/0x920 [vmxnet3]
...

Fixes: d1a890fa37f27 ("net: VMware virtual Ethernet NIC driver: vmxnet3")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Zixuan Fu <r33s3n6@gmail.com>
Link: https://lore.kernel.org/r/20220514050711.2636709-1-r33s3n6@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25 08:41:19 +02:00
Zixuan Fu
2bee202d06 net: vmxnet3: fix possible use-after-free bugs in vmxnet3_rq_alloc_rx_buf()
[ Upstream commit 9e7fef9521e73ca8afd7da9e58c14654b02dfad8 ]

In vmxnet3_rq_alloc_rx_buf(), when dma_map_single() fails, rbi->skb is
freed immediately. Similarly, in another branch, when dma_map_page() fails,
rbi->page is also freed. In the two cases, vmxnet3_rq_alloc_rx_buf()
returns an error to its callers vmxnet3_rq_init() -> vmxnet3_rq_init_all()
-> vmxnet3_activate_dev(). Then vmxnet3_activate_dev() calls
vmxnet3_rq_cleanup_all() in error handling code, and rbi->skb or rbi->page
are freed again in vmxnet3_rq_cleanup_all(), causing use-after-free bugs.

To fix these possible bugs, rbi->skb and rbi->page should be cleared after
they are freed.

The error log in our fault-injection testing is shown as follows:

[   14.319016] BUG: KASAN: use-after-free in consume_skb+0x2f/0x150
...
[   14.321586] Call Trace:
...
[   14.325357]  consume_skb+0x2f/0x150
[   14.325671]  vmxnet3_rq_cleanup_all+0x33a/0x4e0 [vmxnet3]
[   14.326150]  vmxnet3_activate_dev+0xb9d/0x2ca0 [vmxnet3]
[   14.326616]  vmxnet3_open+0x387/0x470 [vmxnet3]
...
[   14.361675] Allocated by task 351:
...
[   14.362688]  __netdev_alloc_skb+0x1b3/0x6f0
[   14.362960]  vmxnet3_rq_alloc_rx_buf+0x1b0/0x8d0 [vmxnet3]
[   14.363317]  vmxnet3_activate_dev+0x3e3/0x2ca0 [vmxnet3]
[   14.363661]  vmxnet3_open+0x387/0x470 [vmxnet3]
...
[   14.367309]
[   14.367412] Freed by task 351:
...
[   14.368932]  __dev_kfree_skb_any+0xd2/0xe0
[   14.369193]  vmxnet3_rq_alloc_rx_buf+0x71e/0x8d0 [vmxnet3]
[   14.369544]  vmxnet3_activate_dev+0x3e3/0x2ca0 [vmxnet3]
[   14.369883]  vmxnet3_open+0x387/0x470 [vmxnet3]
[   14.370174]  __dev_open+0x28a/0x420
[   14.370399]  __dev_change_flags+0x192/0x590
[   14.370667]  dev_change_flags+0x7a/0x180
[   14.370919]  do_setlink+0xb28/0x3570
[   14.371150]  rtnl_newlink+0x1160/0x1740
[   14.371399]  rtnetlink_rcv_msg+0x5bf/0xa50
[   14.371661]  netlink_rcv_skb+0x1cd/0x3e0
[   14.371913]  netlink_unicast+0x5dc/0x840
[   14.372169]  netlink_sendmsg+0x856/0xc40
[   14.372420]  ____sys_sendmsg+0x8a7/0x8d0
[   14.372673]  __sys_sendmsg+0x1c2/0x270
[   14.372914]  do_syscall_64+0x41/0x90
[   14.373145]  entry_SYSCALL_64_after_hwframe+0x44/0xae
...

Fixes: 5738a09d58d5a ("vmxnet3: fix checks for dma mapping errors")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Zixuan Fu <r33s3n6@gmail.com>
Link: https://lore.kernel.org/r/20220514050656.2636588-1-r33s3n6@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25 08:41:19 +02:00
Ulf Hansson
327b668989 mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch()
commit 533a6cfe08f96a7b5c65e06d20916d552c11b256 upstream

All callers of __mmc_switch() should now be specifying a valid timeout for
the CMD6 command. However, just to be sure, let's print a warning and
default to use the generic_cmd6_time in case the provided timeout_ms
argument is zero.

In this context, let's also simplify some of the corresponding code and
clarify some related comments.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20200122142747.5690-4-ulf.hansson@linaro.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-25 08:41:19 +02:00
Ulf Hansson
d471e9e673 mmc: block: Use generic_cmd6_time when modifying INAND_CMD38_ARG_EXT_CSD
commit ad91619aa9d78ab1c6d4a969c3db68bc331ae76c upstream

The INAND_CMD38_ARG_EXT_CSD is a vendor specific EXT_CSD register, which is
used to prepare an erase/trim operation. However, it doesn't make sense to
use a timeout of 10 minutes while updating the register, which becomes the
case when the timeout_ms argument for mmc_switch() is set to zero.

Instead, let's use the generic_cmd6_time, as that seems like a reasonable
timeout to use for these cases.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20200122142747.5690-3-ulf.hansson@linaro.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-25 08:41:19 +02:00
Ulf Hansson
0aa3b6395f mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC
commit 24ed3bd01d6a844fd5e8a75f48d0a3d10ed71bf9 upstream

The timeout values used while waiting for a CMD6 for BKOPS or a CACHE_FLUSH
to complete, are not defined by the eMMC spec. However, a timeout of 10
minutes as is currently being used, is just silly for both of these cases.
Instead, let's specify more reasonable timeouts, 120s for BKOPS and 30s for
CACHE_FLUSH.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20200122142747.5690-2-ulf.hansson@linaro.org
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-25 08:41:19 +02:00
Hangyu Hua
e2eed8c338 drm/dp/mst: fix a possible memory leak in fetch_monitor_name()
commit 6e03b13cc7d9427c2c77feed1549191015615202 upstream.

drm_dp_mst_get_edid call kmemdup to create mst_edid. So mst_edid need to be
freed after use.

Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220516032042.13166-1-hbh25y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-25 08:41:19 +02:00
Peter Zijlstra
dee63319e2 perf: Fix sys_perf_event_open() race against self
commit 3ac6487e584a1eb54071dbe1212e05b884136704 upstream.

Norbert reported that it's possible to race sys_perf_event_open() such
that the looser ends up in another context from the group leader,
triggering many WARNs.

The move_group case checks for races against itself, but the
!move_group case doesn't, seemingly relying on the previous
group_leader->ctx == ctx check. However, that check is racy due to not
holding any locks at that time.

Therefore, re-check the result after acquiring locks and bailing
if they no longer match.

Additionally, clarify the not_move_group case from the
move_group-vs-move_group race.

Fixes: f63a8daa5812 ("perf: Fix event->ctx locking")
Reported-by: Norbert Slusarek <nslusarek@gmx.net>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-25 08:41:19 +02:00
Takashi Iwai
02fe93d1c6 ALSA: wavefront: Proper check of get_user() error
commit a34ae6c0660d3b96b0055f68ef74dc9478852245 upstream.

The antient ISA wavefront driver reads its sample patch data (uploaded
over an ioctl) via __get_user() with no good reason; likely just for
some performance optimizations in the past.  Let's change this to the
standard get_user() and the error check for handling the fault case
properly.

Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220510103626.16635-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-25 08:41:19 +02:00
linyujun
2db68a7c09 ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame()
[ Upstream commit 9be4c88bb7924f68f88cfd47d925c2d046f51a73 ]

The following KASAN warning is detected by QEMU.

==================================================================
BUG: KASAN: stack-out-of-bounds in unwind_frame+0x508/0x870
Read of size 4 at addr c36bba90 by task cat/163

CPU: 1 PID: 163 Comm: cat Not tainted 5.10.0-rc1 #40
Hardware name: ARM-Versatile Express
[<c0113fac>] (unwind_backtrace) from [<c010e71c>] (show_stack+0x10/0x14)
[<c010e71c>] (show_stack) from [<c0b805b4>] (dump_stack+0x98/0xb0)
[<c0b805b4>] (dump_stack) from [<c0b7d658>] (print_address_description.constprop.0+0x58/0x4bc)
[<c0b7d658>] (print_address_description.constprop.0) from [<c031435c>] (kasan_report+0x154/0x170)
[<c031435c>] (kasan_report) from [<c0113c44>] (unwind_frame+0x508/0x870)
[<c0113c44>] (unwind_frame) from [<c010e298>] (__save_stack_trace+0x110/0x134)
[<c010e298>] (__save_stack_trace) from [<c01ce0d8>] (stack_trace_save+0x8c/0xb4)
[<c01ce0d8>] (stack_trace_save) from [<c0313520>] (kasan_set_track+0x38/0x60)
[<c0313520>] (kasan_set_track) from [<c0314cb8>] (kasan_set_free_info+0x20/0x2c)
[<c0314cb8>] (kasan_set_free_info) from [<c0313474>] (__kasan_slab_free+0xec/0x120)
[<c0313474>] (__kasan_slab_free) from [<c0311e20>] (kmem_cache_free+0x7c/0x334)
[<c0311e20>] (kmem_cache_free) from [<c01c35dc>] (rcu_core+0x390/0xccc)
[<c01c35dc>] (rcu_core) from [<c01013a8>] (__do_softirq+0x180/0x518)
[<c01013a8>] (__do_softirq) from [<c0135214>] (irq_exit+0x9c/0xe0)
[<c0135214>] (irq_exit) from [<c01a40e4>] (__handle_domain_irq+0xb0/0x110)
[<c01a40e4>] (__handle_domain_irq) from [<c0691248>] (gic_handle_irq+0xa0/0xb8)
[<c0691248>] (gic_handle_irq) from [<c0100b0c>] (__irq_svc+0x6c/0x94)
Exception stack(0xc36bb928 to 0xc36bb970)
b920:                   c36bb9c0 00000000 c0126919 c0101228 c36bb9c0 b76d7730
b940: c36b8000 c36bb9a0 c3335b00 c01ce0d8 00000003 c36bba3c c36bb940 c36bb978
b960: c010e298 c011373c 60000013 ffffffff
[<c0100b0c>] (__irq_svc) from [<c011373c>] (unwind_frame+0x0/0x870)
[<c011373c>] (unwind_frame) from [<00000000>] (0x0)

The buggy address belongs to the page:
page:(ptrval) refcount:0 mapcount:0 mapping:00000000 index:0x0 pfn:0x636bb
flags: 0x0()
raw: 00000000 00000000 ef867764 00000000 00000000 00000000 ffffffff 00000000
page dumped because: kasan: bad access detected

addr c36bba90 is located in stack of task cat/163 at offset 48 in frame:
 stack_trace_save+0x0/0xb4

this frame has 1 object:
 [32, 48) 'trace'

Memory state around the buggy address:
 c36bb980: f1 f1 f1 f1 00 04 f2 f2 00 00 f3 f3 00 00 00 00
 c36bba00: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
>c36bba80: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
                 ^
 c36bbb00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 c36bbb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================

There is a same issue on x86 and has been resolved by the commit f7d27c35ddff
("x86/mm, kasan: Silence KASAN warnings in get_wchan()").
The solution could be applied to arm architecture too.

Signed-off-by: Lin Yujun <linyujun809@huawei.com>
Reported-by: He Ying <heying24@huawei.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25 08:41:18 +02:00
Jakob Koschel
39bdc65bb7 drbd: remove usage of list iterator variable after loop
[ Upstream commit 901aeda62efa21f2eae937bccb71b49ae531be06 ]

In preparation to limit the scope of a list iterator to the list
traversal loop, use a dedicated pointer to iterate through the list [1].

Since that variable should not be used past the loop iteration, a
separate variable is used to 'remember the current location within the
loop'.

To either continue iterating from that position or skip the iteration
(if the previous iteration was complete) list_prepare_entry() is used.

Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Link: https://lore.kernel.org/r/20220331220349.885126-1-jakobkoschel@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25 08:41:18 +02:00
Xiaoke Wang
2ca4712ed0 MIPS: lantiq: check the return value of kzalloc()
[ Upstream commit 34123208bbcc8c884a0489f543a23fe9eebb5514 ]

kzalloc() is a memory allocation function which can return NULL when
some internal memory errors happen. So it is better to check the
return value of it to prevent potential wrong memory access or
memory leak.

Signed-off-by: Xiaoke Wang <xkernel.wang@foxmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25 08:41:18 +02:00
Zheng Yongjun
79e309c18e Input: stmfts - fix reference leak in stmfts_input_open
[ Upstream commit 26623eea0da3476446909af96c980768df07bbd9 ]

pm_runtime_get_sync() will increment pm usage counter even it
failed. Forgetting to call pm_runtime_put_noidle will result
in reference leak in stmfts_input_open, so we should fix it.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Link: https://lore.kernel.org/r/20220317131604.53538-1-zhengyongjun3@huawei.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25 08:41:18 +02:00
Jeff LaBundy
9cc62ef5ba Input: add bounds checking to input_set_capability()
[ Upstream commit 409353cbe9fe48f6bc196114c442b1cff05a39bc ]

Update input_set_capability() to prevent kernel panic in case the
event code exceeds the bitmap for the given event type.

Suggested-by: Tomasz Moń <tomasz.mon@camlingroup.com>
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Tomasz Moń <tomasz.mon@camlingroup.com>
Link: https://lore.kernel.org/r/20220320032537.545250-1-jeff@labundy.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25 08:41:18 +02:00
David Gow
9c4a3cecfa um: Cleanup syscall_handler_t definition/cast, fix warning
[ Upstream commit f4f03f299a56ce4d73c5431e0327b3b6cb55ebb9 ]

The syscall_handler_t type for x86_64 was defined as 'long (*)(void)',
but always cast to 'long (*)(long, long, long, long, long, long)' before
use. This now triggers a warning (see below).

Define syscall_handler_t as the latter instead, and remove the cast.
This simplifies the code, and fixes the warning.

Warning:
In file included from ../arch/um/include/asm/processor-generic.h:13
                 from ../arch/x86/um/asm/processor.h:41
                 from ../include/linux/rcupdate.h:30
                 from ../include/linux/rculist.h:11
                 from ../include/linux/pid.h:5
                 from ../include/linux/sched.h:14
                 from ../include/linux/ptrace.h:6
                 from ../arch/um/kernel/skas/syscall.c:7:
../arch/um/kernel/skas/syscall.c: In function ‘handle_syscall’:
../arch/x86/um/shared/sysdep/syscalls_64.h:18:11: warning: cast between incompatible function types from ‘long int (*)(void)’ to ‘long int (*)(long int,  long int,  long int,  long int,  long int,  long int)’ [
-Wcast-function-type]
   18 |         (((long (*)(long, long, long, long, long, long)) \
      |           ^
../arch/x86/um/asm/ptrace.h:36:62: note: in definition of macro ‘PT_REGS_SET_SYSCALL_RETURN’
   36 | #define PT_REGS_SET_SYSCALL_RETURN(r, res) (PT_REGS_AX(r) = (res))
      |                                                              ^~~
../arch/um/kernel/skas/syscall.c:46:33: note: in expansion of macro ‘EXECUTE_SYSCALL’
   46 |                                 EXECUTE_SYSCALL(syscall, regs));
      |                                 ^~~~~~~~~~~~~~~

Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-25 08:41:18 +02:00
Willy Tarreau
dc650d53ba floppy: use a statically allocated error counter
commit f71f01394f742fc4558b3f9f4c7ef4c4cf3b07c8 upstream.

Interrupt handler bad_flp_intr() may cause a UAF on the recently freed
request just to increment the error count.  There's no point keeping
that one in the request anyway, and since the interrupt handler uses a
static pointer to the error which cannot be kept in sync with the
pending request, better make it use a static error counter that's reset
for each new request.  This reset now happens when entering
redo_fd_request() for a new request via set_next_request().

One initial concern about a single error counter was that errors on one
floppy drive could be reported on another one, but this problem is not
real given that the driver uses a single drive at a time, as that
PC-compatible controllers also have this limitation by using shared
signals.  As such the error count is always for the "current" drive.

Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Tested-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-25 08:41:18 +02:00
azrim
2af6028650
configs: surya: enable CONFIG_F2FS_FS_COMPRESSION
Signed-off-by: azrim <mirzaspc@gmail.com>
2022-05-20 16:20:00 +09:00
Cyber Knight
22d0937601
defconfig: Disable CONFIG_F2FS_IOSTAT
- These stats are unnecessary on a production device.

Signed-off-by: Cyber Knight <cyberknight755@gmail.com>
Signed-off-by: azrim <mirzaspc@gmail.com>
2022-05-20 16:20:00 +09:00
azrim
34eebc752c
configs: surya: Regenerate full defconfig 2022-05-20 16:19:45 +09:00
azrim
8ec9d8bf01
fs/f2fs: fixup e9e83ae0802826c56aff6c16ee8e6e473e66266e 2022-05-20 16:19:42 +09:00
Andrzej Perczak
38863c904e
f2fs: Enable ATGC and GC_MERGE by default
- ATGC is a new feature that provides enhances efficiency and
effectiveness of bg GC.

- Theoretically, on mobile devices with limited I/O and CPU resources,
the background GC when triggered might make the system sluggish.
Forcibly turning on gc_merge will eliminate this unintended sluggish
nature of the device upon background GC trigger.

Suggested-by: Panchajanya1999 <panchajanya@azure-dev.live>
Signed-off-by: Andrzej Perczak <linux@andrzejperczak.com>
Change-Id: I81977f01b8bfd03f587f1b6ccfab0eb4b69d703f
Signed-off-by: Panchajanya1999 <panchajanya@azure-dev.live>
Signed-off-by: Cyber Knight <cyberknight755@gmail.com>
Signed-off-by: azrim <mirzaspc@gmail.com>
2022-05-20 14:51:43 +09:00
Forenche
acce24ee2a
f2fs: Fix kernel panic after f2fs-stable merge
- [1] added inline encryption support in F2FS yet one important snippet was dropped in [2].
- This caused a kernel panic regarding fscrypt at init.
- Reverting changes done to the snippet fixed boot.

[1]: e64327f5719b4 {"BACKPORT: FROMLIST: f2fs: add inline encryption support"}
[2]: f23c8d887eab {"F2FS: Merge branch `upstream-f2fs-stable-linux-4.14.y` of `msm-4.14`"}

[cyberknight777: reword commit message and description]
Signed-off-by: Forenche <prahul2003@gmail.com>
Signed-off-by: Cyber Knight <cyberknight755@gmail.com>
Signed-off-by: azrim <mirzaspc@gmail.com>
2022-05-20 14:51:43 +09:00
Shachar Raindel
ee6c2db797
f2fs: Fix deadlock between f2fs_quota_sync and block_operation
This deadlock is hitting Android users (Pixel 3/3a/4) with Magisk, due
to frequent umount/mount operations that trigger quota_sync, hitting
the race. See https://github.com/topjohnwu/Magisk/issues/3171 for
additional impact discussion.

In commit db6ec53b7e03, we added a semaphore to protect quota flags.
As part of this commit, we changed f2fs_quota_sync to call
f2fs_lock_op, in an attempt to prevent an AB/BA type deadlock with
quota_sem locking in block_operation.  However, rwsem in Linux is not
recursive. Therefore, the following deadlock can occur:

f2fs_quota_sync
down_read(cp_rwsem) // f2fs_lock_op
filemap_fdatawrite
f2fs_write_data_pages
...
                                   block_opertaion
				   down_write(cp_rwsem) - marks rwsem as
				                          "writer pending"
down_read_trylock(cp_rwsem) - fails as there is
                              a writer pending.
			      Code keeps on trying,
			      live-locking the filesystem.

We solve this by creating a new rwsem, used specifically to
synchronize this case, instead of attempting to reuse an existing
lock.

Signed-off-by: Shachar Raindel <shacharr@gmail.com>

Fixes: db6ec53b7e03 f2fs: add a rw_sem to cover quota flag changes
Signed-off-by: Fiqri Ardyansyah <fiqri15072019@gmail.com>
Signed-off-by: Forenche <prahul2003@gmail.com>
Signed-off-by: Cyber Knight <cyberknight755@gmail.com>
Signed-off-by: azrim <mirzaspc@gmail.com>
2022-05-20 14:51:43 +09:00
Cyber Knight
d0c0cafadc
f2fs: Use reader-unfair rwsems for f2fs_umount_end()
- f2fs_umount_end() is an Android-specific function added at [1], hence let's use reader-unfair rwsems for it aswell.

[1]: 6a46bcc22317f3

Fixes: 07efb75333f96 {"f2fs: move f2fs to use reader-unfair rwsems"}
Signed-off-by: Cyber Knight <cyberknight755@gmail.com>
Signed-off-by: azrim <mirzaspc@gmail.com>
2022-05-20 14:51:43 +09:00
Daniel Rosenberg
a1ccea0dea
[FIXUP]: 4200d6e ("FROMLIST: Add standard casefolding support")
This adds general supporting functions for filesystems that use
utf8 casefolding. It provides standard dentry_operations and adds the
necessary structures in struct super_block to allow this standardization.

Ext4 and F2fs are switch to these implementations.

Signed-off-by: Daniel Rosenberg <drosen@google.com>
Note: Fixed issue with non-strictly enforced fallback hash
Test: Boots, /data/media is case insensitive
Bug: 138322712
Link: https://lore.kernel.org/linux-f2fs-devel/20200208013552.241832-1-drosen@google.com/T/#t
Change-Id: I81b5fb5d3ce0259a60712ae2505c1e4b03dbafde
[atndko & cyberknight777: This was broken in latest f2fs-stable merge 57e3a83d29e4 ("F2FS: Merge branch `linux-4.14.y` of `jaegeuk/f2fs-stable`").]
Signed-off-by: atndko <z1281552865@gmail.com>
Signed-off-by: Zlatan Radovanovic <zlatan.radovanovic@fet.ba>
Signed-off-by: Cyber Knight <cyberknight755@gmail.com>
Signed-off-by: azrim <mirzaspc@gmail.com>
2022-05-20 14:51:42 +09:00
azrim
e9e83ae080
Merge remote-tracking branch 'google/upstream-f2fs-stable-linux-4.14.y' into sheesh
* google/upstream-f2fs-stable-linux-4.14.y:
  f2fs: fix to do sanity check on .cp_pack_total_block_count
  f2fs: make gc_urgent and gc_segment_mode sysfs node readable
  f2fs: use aggressive GC policy during f2fs_disable_checkpoint()
  f2fs: fix compressed file start atomic write may cause data corruption
  f2fs: initialize sbi->gc_mode explicitly
  f2fs: introduce gc_urgent_mid mode
  f2fs: compress: fix to print raw data size in error path of lz4 decompression
  f2fs: remove redundant parameter judgment
  f2fs: use spin_lock to avoid hang
  f2fs: don't get FREEZE lock in f2fs_evict_inode in frozen fs
  f2fs: remove unnecessary read for F2FS_FITS_IN_INODE
  f2fs: fix to do sanity check on curseg->alloc_type
  f2fs: fix to avoid potential deadlock
  f2fs: quota: fix loop condition at f2fs_quota_sync()
  f2fs: Restore rwsem lockdep support
  f2fs: fix missing free nid in f2fs_handle_failed_inode
  f2fs: add a way to limit roll forward recovery time
  f2fs: introduce F2FS_IPU_HONOR_OPU_WRITE ipu policy
  f2fs: adjust readahead block number during recovery
  f2fs: fix to unlock page correctly in error path of is_alive()
  f2fs: expose discard related parameters in sysfs
  f2fs: move discard parameters into discard_cmd_control
  f2fs: fix to enable ATGC correctly via gc_idle sysfs interface
  f2fs: move f2fs to use reader-unfair rwsems
  f2fs: do not allow partial truncation on pinned file
  f2fs: remove redunant invalidate compress pages
  f2fs: Simplify bool conversion
  f2fs: don't drop compressed page cache in .{invalidate,release}page
  f2fs: fix to reserve space for IO align feature
  f2fs: fix to check available space of CP area correctly in update_ckpt_flags()
  f2fs: support fault injection to f2fs_trylock_op()
  f2fs: clean up __find_inline_xattr() with __find_xattr()
  f2fs: fix to do sanity check on last xattr entry in __f2fs_setxattr()
  f2fs: do not bother checkpoint by f2fs_get_node_info
  f2fs: avoid down_write on nat_tree_lock during checkpoint
  f2fs: compress: fix potential deadlock of compress file
  f2fs: avoid EINVAL by SBI_NEED_FSCK when pinning a file
  f2fs: add gc_urgent_high_remaining sysfs node
  f2fs: fix to do sanity check in is_alive()
  f2fs: fix to avoid panic in is_alive() if metadata is inconsistent
  f2fs: fix to do sanity check on inode type during garbage collection
  f2fs: avoid duplicate call of mark_inode_dirty
  f2fs: fix remove page failed in invalidate compress pages
  f2fs: fix the f2fs_file_write_iter tracepoint
  f2fs: do not expose unwritten blocks to user by DIO
  f2fs: reduce indentation in f2fs_file_write_iter()
  f2fs: rework write preallocations
  f2fs: compress: reduce one page array alloc and free when write compressed page
  f2fs: show number of pending discard commands
  f2fs: check nr_pages for readahead
  f2fs: fix UAF in f2fs_available_free_memory
  f2fs: invalidate META_MAPPING before IPU/DIO write
  f2fs: support fault injection for dquot_initialize()
  f2fs: fix incorrect return value in f2fs_sanity_check_ckpt()
  f2fs: compress: disallow disabling compress on non-empty compressed file
  f2fs: compress: fix overwrite may reduce compress ratio unproperly
  f2fs: multidevice: support direct IO
  f2fs: introduce fragment allocation mode mount option
  f2fs: include non-compressed blocks in compr_written_block
  f2fs: fix wrong condition to trigger background checkpoint correctly
  f2fs: fix to use WHINT_MODE
  f2fs: fix up f2fs_lookup tracepoints
  f2fs: set SBI_NEED_FSCK flag when inconsistent node block found
  f2fs: introduce excess_dirty_threshold()
  f2fs: avoid attaching SB_ACTIVE flag during mount
  f2fs: quota: fix potential deadlock
  f2fs: should use GFP_NOFS for directory inodes
  f2fs: should put a page beyond EOF when preparing a write
  f2fs: deallocate compressed pages when error happens
  f2fs: enable realtime discard iff device supports discard
  f2fs: guarantee to write dirty data when enabling checkpoint back
  f2fs: fix to unmap pages from userspace process in punch_hole()
  f2fs: fix unexpected ENOENT comes from f2fs_map_blocks()
  f2fs: fix to account missing .skipped_gc_rwsem
  f2fs: adjust unlock order for cleanup
  f2fs: Don't create discard thread when device doesn't support realtime discard
  f2fs: rebuild nat_bits during umount
  f2fs: introduce periodic iostat io latency traces
  f2fs: separate out iostat feature
  f2fs: compress: do sanity check on cluster
  f2fs: fix description about main_blkaddr node
  f2fs: convert S_IRUGO to 0444
  f2fs: fix to keep compatibility of fault injection interface
  f2fs: support fault injection for f2fs_kmem_cache_alloc()
  f2fs: compress: allow write compress released file after truncate to zero
  f2fs: correct comment in segment.h
  f2fs: improve sbi status info in debugfs/f2fs/status
  f2fs: compress: avoid duplicate counting of valid blocks when read compressed file
  f2fs: fix to do sanity check for sb/cp fields correctly
  f2fs: avoid unneeded memory allocation in __add_ino_entry()
  f2fs: extent cache: support unaligned extent
  f2fs: Kconfig: clean up config options about compression
  f2fs: reduce the scope of setting fsck tag when de->name_len is zero
  f2fs: fix to stop filesystem update once CP failed
  f2fs: introduce discard_unit mount option
  f2fs: fix min_seq_blocks can not make sense in some scenes.
  f2fs: fix to force keeping write barrier for strict fsync mode
  f2fs: fix wrong checkpoint_changed value in f2fs_remount()
  f2fs: show sbi status in debugfs/f2fs/status
  f2fs: turn back remapped address in compressed page endio
  f2fs: change fiemap way in printing compression chunk
  f2fs: do not submit NEW_ADDR to read node block
  f2fs: compress: remove unneeded read when rewrite whole cluster
  f2fs: don't sleep while grabing nat_tree_lock
  f2fs: remove allow_outplace_dio()
  f2fs: make f2fs_write_failed() take struct inode
  f2fs: quota: fix potential deadlock
  f2fs: let's keep writing IOs on SBI_NEED_FSCK
  f2fs: Revert "f2fs: Fix indefinite loop in f2fs_gc() v1"
  f2fs: avoid to create an empty string as the extension_list
  f2fs: compress: fix to set zstd compress level correctly
  f2fs: add sysfs nodes to get GC info for each GC mode
  f2fs: drop dirty node pages when cp is in error status
  f2fs: initialize page->private when using for our internal use
  f2fs: compress: add nocompress extensions support
  Revert "f2fs: avoid attaching SB_ACTIVE flag during mount/remount"
  f2fs: remove false alarm on iget failure during GC
  f2fs: enable extent cache for compression files in read-only
  f2fs: fix to avoid adding tab before doc section
  f2fs: introduce f2fs_casefolded_name slab cache
  f2fs: swap: support migrating swapfile in aligned write mode
  f2fs: swap: remove dead codes
  f2fs: compress: add compress_inode to cache compressed blocks
  f2fs: clean up /sys/fs/f2fs/<disk>/features
  f2fs: add pin_file in feature list
  f2fs: Advertise encrypted casefolding in sysfs
  f2fs: Show casefolding support only when supported
  f2fs: support RO feature
  f2fs: logging neatening
  f2fs: restructure f2fs page.private layout
  f2fs: introduce FI_COMPRESS_RELEASED instead of using IMMUTABLE bit
  f2fs: compress: remove unneeded preallocation
  f2fs: avoid attaching SB_ACTIVE flag during mount/remount
  f2fs: atgc: export entries for better tunability via sysfs
  f2fs: compress: fix to disallow temp extension
  f2fs: let's allow compression for mmap files
  f2fs: add MODULE_SOFTDEP to ensure crc32 is included in the initramfs
  f2fs: return success if there is no work to do
  f2fs: compress: clean up parameter of __f2fs_cluster_blocks()
  f2fs: compress: remove unneeded f2fs_put_dnode()
  f2fs: atgc: fix to set default age threshold
  f2fs: Prevent swap file in LFS mode
  f2fs: fix to avoid racing on fsync_entry_slab by multi filesystem instances
  f2fs: add cp_error check in f2fs_write_compressed_pages
  f2fs: compress: rename __cluster_may_compress
  f2fs: return EINVAL for hole cases in swap file
  f2fs: avoid swapon failure by giving a warning first
  f2fs: compress: fix to assign cc.cluster_idx correctly
  f2fs: compress: fix race condition of overwrite vs truncate
  f2fs: compress: fix to free compress page correctly
  f2fs: support iflag change given the mask
  f2fs: avoid null pointer access when handling IPU error
  f2fs: drop inplace IO if fs status is abnormal
  f2fs: compress: remove unneed check condition
  f2fs: clean up left deprecated IO trace codes
  f2fs: avoid using native allocate_segment_by_default()
  f2fs: remove unnecessary struct declaration
  f2fs: fix to avoid NULL pointer dereference
  f2fs: avoid duplicated codes for cleanup
  f2fs: document: add description about compressed space handling
  f2fs: clean up build warnings
  f2fs: fix the periodic wakeups of discard thread
  f2fs: fix to avoid accessing invalid fio in f2fs_allocate_data_block()
  f2fs: fix to avoid GC/mmap race with f2fs_truncate()
  f2fs: set checkpoint_merge by default
  f2fs: Fix a hungtask problem in atomic write
  f2fs: fix to restrict mount condition on readonly block device
  f2fs: introduce gc_merge mount option
  f2fs: fix to cover __allocate_new_section() with curseg_lock
  f2fs: fix wrong alloc_type in f2fs_do_replace_block
  f2fs: delete empty compress.h
  f2fs: fix a typo in inode.c
  f2fs: allow to change discard policy based on cached discard cmds
  f2fs: fix to avoid touching checkpointed data in get_victim()
  f2fs: fix to update last i_size if fallocate partially succeeds
  f2fs: fix error path of f2fs_remount()
  f2fs: fix wrong comment of nat_tree_lock
  f2fs: fix to avoid out-of-bounds memory access
  f2fs: don't start checkpoint thread in readonly mountpoint
  f2fs: do not use AT_SSR mode in FG_GC & high urgent BG_GC
  f2fs: add sysfs nodes to get runtime compression stat
  f2fs: fix to use per-inode maxbytes in f2fs_fiemap
  f2fs: fix to align to section for fallocate() on pinned file
  f2fs: expose # of overprivision segments
  f2fs: fix error handling in f2fs_end_enable_verity()
  f2fs: fix a redundant call to f2fs_balance_fs if an error occurs
  f2fs: remove unused file_clear_encrypt()
  f2fs: check if swapfile is section-alligned
  f2fs: fix last_lblock check in check_swap_activate_fast
  f2fs: remove unnecessary IS_SWAPFILE check
  f2fs: Replace one-element array with flexible-array member
  f2fs: compress: Allow modular (de)compression algorithms
  f2fs: check discard command number before traversing discard pending list
  f2fs: update comments for explicit memory barrier
  f2fs: remove unused FORCE_FG_GC macro
  f2fs: avoid unused f2fs_show_compress_options()
  f2fs: fix panic during f2fs_resize_fs()
  f2fs: fix to allow migrating fully valid segment
  f2fs: fix a spelling error
  f2fs: fix a spacing coding style
  fs: Enable bmap() function to properly return errors
  f2fs: remove obsolete f2fs.txt
  fs-verity: support reading signature with ioctl
  fs-verity: support reading descriptor with ioctl
  fs-verity: support reading Merkle tree with ioctl
  fs-verity: add FS_IOC_READ_VERITY_METADATA ioctl
  fs-verity: don't pass whole descriptor to fsverity_verify_signature()
  fs-verity: factor out fsverity_get_descriptor()
  fs-verity: move structs needed for file signing to UAPI header
  fs-verity: rename "file measurement" to "file digest"
  fs-verity: rename fsverity_signed_digest to fsverity_formatted_digest
  fs-verity: remove filenames from file comments
  fs-verity: use smp_load_acquire() for ->i_verity_info
  f2fs: remove FAULT_ALLOC_BIO
  f2fs: use blkdev_issue_flush in __submit_flush_wait
  f2fs: remove a few bd_part checks
  quota: Cleanup list iteration in dqcache_shrink_scan()
  quota: reclaim least recently used dquots
  fs: quota: Replace GFP_ATOMIC with GFP_KERNEL in dquot_init
  quota: Check for register_shrinker() failure.
  quota: propagate error from __dquot_initialize
  quota: be aware of error from dquot_initialize
  Documentation: f2fs: fix typo s/automaic/automatic
  f2fs: give a warning only for readonly partition
  f2fs: don't grab superblock freeze for flush/ckpt thread
  f2fs: add ckpt_thread_ioprio sysfs node
  f2fs: introduce checkpoint_merge mount option
  f2fs: relocate inline conversion from mmap() to mkwrite()
  f2fs: fix a wrong condition in __submit_bio
  f2fs: remove unnecessary initialization in xattr.c
  f2fs: fix to avoid inconsistent quota data
  f2fs: flush data when enabling checkpoint back
  f2fs: deprecate f2fs_trace_io
  f2fs: remove unused stat_{inc, dec}_atomic_write
  f2fs: introduce sb_status sysfs node
  f2fs: fix to use per-inode maxbytes
  f2fs: compress: fix potential deadlock
  libfs: unexport generic_ci_d_compare() and generic_ci_d_hash()
  f2fs: fix to set/clear I_LINKABLE under i_lock
  f2fs: fix null page reference in redirty_blocks
  f2fs: clean up post-read processing
  f2fs: trival cleanup in move_data_block()
  f2fs: fix out-of-repair __setattr_copy()
  f2fs: fix to tag FIEMAP_EXTENT_MERGED in f2fs_fiemap()
  f2fs: introduce a new per-sb directory in sysfs
  f2fs: compress: support compress level
  f2fs: compress: deny setting unsupported compress algorithm
  f2fs: relocate f2fs_precache_extents()
  f2fs: enforce the immutable flag on open files
  f2fs: enhance to update i_mode and acl atomically in f2fs_setattr()
  f2fs: fix to set inode->i_mode correctly for posix_acl_update_mode
  f2fs: Replace expression with offsetof()
  f2fs: handle unallocated section and zone on pinned/atgc
  f2fs: compress: fix compression chksum
  f2fs: fix shift-out-of-bounds in sanity_check_raw_super()
  f2fs: fix race of pending_pages in decompression
  f2fs: fix to account inline xattr correctly during recovery
  f2fs: inline: fix wrong inline inode stat
  f2fs: inline: correct comment in f2fs_recover_inline_data
  f2fs: don't check PAGE_SIZE again in sanity_check_raw_super()
  f2fs: convert to F2FS_*_INO macro
  f2fs: introduce max_io_bytes, a sysfs entry, to limit bio size
  f2fs: don't allow any writes on readonly mount
  f2fs: avoid race condition for shrinker count
  f2fs: add F2FS_IOC_DECOMPRESS_FILE and F2FS_IOC_COMPRESS_FILE
  f2fs: add compress_mode mount option
  f2fs: Remove unnecessary unlikely()
  f2fs: init dirty_secmap incorrectly
  f2fs: remove buffer_head which has 32bits limit
  f2fs: fix wrong block count instead of bytes
  f2fs: use new conversion functions between blks and bytes
  f2fs: rename logical_to_blk and blk_to_logical
  f2fs: fix kbytes written stat for multi-device case
  f2fs: compress: support chksum
  f2fs: fix to avoid REQ_TIME and CP_TIME collision
  f2fs: change to use rwsem for cp_mutex
  f2fs: Handle casefolding with Encryption
  fscrypt: Have filesystems handle their d_ops
  libfs: Add generic function for setting dentry_ops
  f2fs: Remove the redundancy initialization
  f2fs: remove writeback_inodes_sb in f2fs_remount
  f2fs: fix double free of unicode map
  f2fs: fix compat F2FS_IOC_{MOVE,GARBAGE_COLLECT}_RANGE
  f2fs: avoid unneeded data copy in f2fs_ioc_move_range()
  f2fs: add F2FS_IOC_SET_COMPRESS_OPTION ioctl
  f2fs: add F2FS_IOC_GET_COMPRESS_OPTION ioctl
  f2fs: move ioctl interface definitions to separated file
  f2fs: fix to seek incorrect data offset in inline data file
  f2fs: check fiemap parameters
  f2fs: call f2fs_get_meta_page_retry for nat page
  fscrypt: rename DCACHE_ENCRYPTED_NAME to DCACHE_NOKEY_NAME
  fscrypt: don't call no-key names "ciphertext names"
  fscrypt: export fscrypt_d_revalidate()
  f2fs: code cleanup by removing unnecessary check
  f2fs: wait for sysfs kobject removal before freeing f2fs_sb_info
  f2fs: fix writecount false positive in releasing compress blocks
  f2fs: introduce check_swap_activate_fast()
  f2fs: don't issue flush in f2fs_flush_device_cache() for nobarrier case
  f2fs: handle errors of f2fs_get_meta_page_nofail
  f2fs: fix to set SBI_NEED_FSCK flag for inconsistent inode
  f2fs: reject CASEFOLD inode flag without casefold feature
  f2fs: fix memory alignment to support 32bit
  f2fs: fix slab leak of rpages pointer
  f2fs: compress: fix to disallow enabling compress on non-empty file
  f2fs: compress: introduce cic/dic slab cache
  f2fs: compress: introduce page array slab cache
  f2fs: fix to do sanity check on segment/section count
  f2fs: fix to check segment boundary during SIT page readahead
  f2fs: fix uninit-value in f2fs_lookup
  fs/buffer.c: record blockdev write errors in super_block that it backs
  vfs: track per-sb writeback errors and report them to syncfs
  f2fs: remove unneeded parameter in find_in_block()
  f2fs: fix wrong total_sections check and fsmeta check
  f2fs: remove duplicated code in sanity_check_area_boundary
  f2fs: remove unused check on version_bitmap
  f2fs: relocate blkzoned feature check
  f2fs: do sanity check on zoned block device path
  f2fs: add trace exit in exception path
  f2fs: change return value of reserved_segments to unsigned int
  f2fs: clean up kvfree
  f2fs: change virtual mapping way for compression pages
  f2fs: change return value of f2fs_disable_compressed_file to bool
  f2fs: change i_compr_blocks of inode to atomic value
  f2fs: ignore compress mount option on image w/o compression feature
  f2fs: allocate proper size memory for zstd decompress
  f2fs: change compr_blocks of superblock info to 64bit
  f2fs: add block address limit check to compressed file
  f2fs: check position in move range ioctl
  f2fs: correct statistic of APP_DIRECT_IO/APP_DIRECT_READ_IO
  f2fs: support age threshold based garbage collection
  f2fs: Use generic casefolding support
  fs: Add standard casefolding support
  unicode: Add utf8_casefold_hash
  f2fs: compress: use more readable atomic_t type for {cic,dic}.ref
  f2fs: fix compile warning
  f2fs: support 64-bits key in f2fs rb-tree node entry
  f2fs: inherit mtime of original block during GC
  f2fs: record average update time of segment
  f2fs: introduce inmem curseg
  f2fs: compress: remove unneeded code
  f2fs: remove duplicated type casting
  f2fs: support zone capacity less than zone size
  f2fs: update changes in upstream on GC_URGENT_HIGH
  f2fs: Return EOF on unaligned end of file DIO read
  f2fs: fix indefinite loop scanning for free nid
  f2fs: Fix type of section block count variables
  f2fs: prepare a waiter before entering io_schedule
  f2fs: update_sit_entry: Make the judgment condition of f2fs_bug_on more intuitive
  f2fs: replace test_and_set/clear_bit() with set/clear_bit()
  f2fs: make file immutable even if releasing zero compression block
  f2fs: compress: disable compression mount option if compression is off
  f2fs: compress: add sanity check during compressed cluster read
  f2fs: use macro instead of f2fs verity version
  f2fs: fix deadlock between quota writes and checkpoint
  f2fs: correct comment of f2fs_exist_written_data
  f2fs: compress: delay temp page allocation
  f2fs: compress: fix to update isize when overwriting compressed file
  f2fs: space related cleanup
  f2fs: fix use-after-free issue
  f2fs: Change the type of f2fs_flush_inline_data() to void
  f2fs: add F2FS_IOC_SEC_TRIM_FILE ioctl
  f2fs: segment.h: delete a duplicated word
  f2fs: compress: fix to avoid memory leak on cc->cpages
  f2fs: use generic names for generic ioctls
  f2fs: don't keep meta inode pages used for compressed block migration
  f2fs: fix error path in do_recover_data()
  f2fs: fix to wait GCed compressed page writeback
  f2fs: remove write attribute of main_blkaddr sysfs node
  f2fs: add GC_URGENT_LOW mode in gc_urgent
  f2fs: avoid readahead race condition
  f2fs: fix return value of move_data_block()
  f2fs: add parameter op_flag in f2fs_submit_page_read()
  f2fs: split f2fs_allocate_new_segments()
  f2fs: lost matching-pair of trace in f2fs_truncate_inode_blocks
  f2fs: fix an oops in f2fs_is_compressed_page
  f2fs: make trace enter and end in pairs for unlink
  f2fs: fix to check page dirty status before writeback
  f2fs: remove the unused compr parameter
  f2fs: support to trace f2fs_fiemap()
  f2fs: support to trace f2fs_bmap()
  f2fs: fix wrong return value of f2fs_bmap_compress()
  f2fs: remove useless parameter of __insert_free_nid()
  f2fs: fix typo in comment of f2fs_do_add_link
  f2fs: fix to wait page writeback before update
  f2fs: show more debug info for per-temperature log
  f2fs: add f2fs_gc exception handle in f2fs_ioc_gc_range
  f2fs: clean up parameter of f2fs_allocate_data_block()
  f2fs: shrink node_write lock coverage
  f2fs: add prefix for exported symbols
  f2fs: use kfree() to free variables allocated by match_strdup()
  f2fs: get the right gc victim section when section has several segments
  f2fs: fix a race condition between f2fs_write_end_io and f2fs_del_fsync_node_entry
  f2fs: remove useless truncate in f2fs_collapse_range()
  f2fs: use kfree() instead of kvfree() to free superblock data
  f2fs: avoid checkpatch error
  f2fs: should avoid inode eviction in synchronous path
2022-05-20 14:51:11 +09:00
azrim
5c7e9c68f7
Merge remote-tracking branch 'google/android-4.14-stable' into sheesh
* google/android-4.14-stable:
  Linux 4.14.280
  tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()
  ping: fix address binding wrt vrf
  drm/vmwgfx: Initialize drm_mode_fb_cmd2
  cgroup/cpuset: Remove cpus_allowed/mems_allowed setup in cpuset_init_smp()
  USB: serial: option: add Fibocom MA510 modem
  USB: serial: option: add Fibocom L610 modem
  USB: serial: qcserial: add support for Sierra Wireless EM7590
  USB: serial: pl2303: add device id for HP LM930 Display
  usb: cdc-wdm: fix reading stuck on device close
  tcp: resalt the secret every 10 seconds
  ASoC: ops: Validate input values in snd_soc_put_volsw_range()
  ASoC: max98090: Generate notifications on changes for custom control
  ASoC: max98090: Reject invalid values in custom control put()
  hwmon: (f71882fg) Fix negative temperature
  net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe()
  net/smc: non blocking recvmsg() return -EAGAIN when no data and signal_pending
  s390/lcs: fix variable dereferenced before check
  s390/ctcm: fix potential memory leak
  s390/ctcm: fix variable dereferenced before check
  hwmon: (ltq-cputemp) restrict it to SOC_XWAY
  mac80211_hwsim: call ieee80211_tx_prepare_skb under RCU protection
  netlink: do not reset transport header in netlink_recvmsg()
  ipv4: drop dst in multicast routing path
  net: Fix features skip in for_each_netdev_feature()
  batman-adv: Don't skb_split skbuffs with frag_list
2022-05-20 12:36:05 +09:00
Greg Kroah-Hartman
2cf46d4b1f This is the 4.14.280 stable release
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEZH8oZUiU471FcZm+ONu9yGCSaT4FAmKEnboACgkQONu9yGCS
 aT79bg/8CmzMv6NQP3ZUjxQ+i93luPSmgYE+RYqT4NT2peEPIdNX5WXvx7kSMhwv
 GHQwXCh+plQOesoMxZiyKex6k/E8bsGUs8wA6tGfEEgSEeBVF9Ky9KXWk/Nk4FJc
 fmjxGYCNsr2mPSGNWewtH24goE0Mf8d5b0g7U7x9MmRrQkGpQrU0PhFiGIQbJ8lH
 agtnvLipDMiCNOFwcGNNyfW5BmtQuOWmTWdgDtmcLbP23IWqdytuuLZXTGZtz8Hf
 3Wj6dHDqEKBGDl0FwGvpYEclB0gCTYO3LJblLk4BJ57lKTnkhAACo8qnp8qL5vve
 HP/rkgug6ZBOL17rKBQEoPodopDOTSa7ChQR+P7KHOYzp4YUypaZFx2Vuy/9rdQ6
 CCdlwQc08cIAts7yNiQPEBDLNTlVT6roEZL1+OdFVkNgrL3VyfptCpWcm/sm+0Rh
 By/CmoBT74ZdqLrDGzb9PpVVjjI8NFv1NGm8fM4T6LelnmjiXnO9mskhic/umMsN
 FtNiSzFew5w2wZc4eDHIo1UlelGifjhCfNPYlSbusZvGnfIsQ7uCaF/GBI0x3maw
 YoyzfLB/q7MPh4kGm1Ak8kczwadFkN2H7BzwzaDV2avABjXrpgornbKLL+hSdXhu
 KQfIJu1lVRVELMT2RL6B6rh5/hm+x7m31rhTUD/abRAu4t6rHbs=
 =MJcb
 -----END PGP SIGNATURE-----

Merge 4.14.280 into android-4.14-stable

Changes in 4.14.280
	batman-adv: Don't skb_split skbuffs with frag_list
	net: Fix features skip in for_each_netdev_feature()
	ipv4: drop dst in multicast routing path
	netlink: do not reset transport header in netlink_recvmsg()
	mac80211_hwsim: call ieee80211_tx_prepare_skb under RCU protection
	hwmon: (ltq-cputemp) restrict it to SOC_XWAY
	s390/ctcm: fix variable dereferenced before check
	s390/ctcm: fix potential memory leak
	s390/lcs: fix variable dereferenced before check
	net/smc: non blocking recvmsg() return -EAGAIN when no data and signal_pending
	net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe()
	hwmon: (f71882fg) Fix negative temperature
	ASoC: max98090: Reject invalid values in custom control put()
	ASoC: max98090: Generate notifications on changes for custom control
	ASoC: ops: Validate input values in snd_soc_put_volsw_range()
	tcp: resalt the secret every 10 seconds
	usb: cdc-wdm: fix reading stuck on device close
	USB: serial: pl2303: add device id for HP LM930 Display
	USB: serial: qcserial: add support for Sierra Wireless EM7590
	USB: serial: option: add Fibocom L610 modem
	USB: serial: option: add Fibocom MA510 modem
	cgroup/cpuset: Remove cpus_allowed/mems_allowed setup in cpuset_init_smp()
	drm/vmwgfx: Initialize drm_mode_fb_cmd2
	ping: fix address binding wrt vrf
	tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()
	Linux 4.14.280

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I26d972bb02df91d847604b4abb78ac84c1371203
2022-05-18 09:36:05 +02:00
Greg Kroah-Hartman
dffb5c6ff0 Linux 4.14.280
Link: https://lore.kernel.org/r/20220516193614.678319286@linuxfoundation.org
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18 09:18:09 +02:00
Yang Yingliang
bae1a3b8d9 tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()
commit 447ee1516f19f534a228dda237eddb202f23e163 upstream.

It will cause null-ptr-deref when using 'res', if platform_get_resource()
returns NULL, so move using 'res' after devm_ioremap_resource() that
will check it to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.

Fixes: 5930cb3511df ("serial: driver for Conexant Digicolor USART")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20220505124621.1592697-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18 09:18:09 +02:00
Nicolas Dichtel
1f0f6cff0c ping: fix address binding wrt vrf
commit e1a7ac6f3ba6e157adcd0ca94d92a401f1943f56 upstream.

When ping_group_range is updated, 'ping' uses the DGRAM ICMP socket,
instead of an IP raw socket. In this case, 'ping' is unable to bind its
socket to a local address owned by a vrflite.

Before the patch:
$ sysctl -w net.ipv4.ping_group_range='0  2147483647'
$ ip link add blue type vrf table 10
$ ip link add foo type dummy
$ ip link set foo master blue
$ ip link set foo up
$ ip addr add 192.168.1.1/24 dev foo
$ ip addr add 2001::1/64 dev foo
$ ip vrf exec blue ping -c1 -I 192.168.1.1 192.168.1.2
ping: bind: Cannot assign requested address
$ ip vrf exec blue ping6 -c1 -I 2001::1 2001::2
ping6: bind icmp socket: Cannot assign requested address

CC: stable@vger.kernel.org
Fixes: 1b69c6d0ae90 ("net: Introduce L3 Master device abstraction")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18 09:18:09 +02:00
Zack Rusin
7ed96e91f9 drm/vmwgfx: Initialize drm_mode_fb_cmd2
commit 3059d9b9f6aa433a55b9d0d21b566396d5497c33 upstream.

Transition to drm_mode_fb_cmd2 from drm_mode_fb_cmd left the structure
unitialized. drm_mode_fb_cmd2 adds a few additional members, e.g. flags
and modifiers which were never initialized. Garbage in those members
can cause random failures during the bringup of the fbcon.

Initializing the structure fixes random blank screens after bootup due
to flags/modifiers mismatches during the fbcon bring up.

Fixes: dabdcdc9822a ("drm/vmwgfx: Switch to mode_cmd2")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: <stable@vger.kernel.org> # v4.10+
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220302152426.885214-7-zack@kde.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18 09:18:09 +02:00
Waiman Long
7a34036ee5 cgroup/cpuset: Remove cpus_allowed/mems_allowed setup in cpuset_init_smp()
commit 2685027fca387b602ae565bff17895188b803988 upstream.

There are 3 places where the cpu and node masks of the top cpuset can
be initialized in the order they are executed:
 1) start_kernel -> cpuset_init()
 2) start_kernel -> cgroup_init() -> cpuset_bind()
 3) kernel_init_freeable() -> do_basic_setup() -> cpuset_init_smp()

The first cpuset_init() call just sets all the bits in the masks.
The second cpuset_bind() call sets cpus_allowed and mems_allowed to the
default v2 values. The third cpuset_init_smp() call sets them back to
v1 values.

For systems with cgroup v2 setup, cpuset_bind() is called once.  As a
result, cpu and memory node hot add may fail to update the cpu and node
masks of the top cpuset to include the newly added cpu or node in a
cgroup v2 environment.

For systems with cgroup v1 setup, cpuset_bind() is called again by
rebind_subsystem() when the v1 cpuset filesystem is mounted as shown
in the dmesg log below with an instrumented kernel.

  [    2.609781] cpuset_bind() called - v2 = 1
  [    3.079473] cpuset_init_smp() called
  [    7.103710] cpuset_bind() called - v2 = 0

smp_init() is called after the first two init functions.  So we don't
have a complete list of active cpus and memory nodes until later in
cpuset_init_smp() which is the right time to set up effective_cpus
and effective_mems.

To fix this cgroup v2 mask setup problem, the potentially incorrect
cpus_allowed & mems_allowed setting in cpuset_init_smp() are removed.
For cgroup v2 systems, the initial cpuset_bind() call will set the masks
correctly.  For cgroup v1 systems, the second call to cpuset_bind()
will do the right setup.

cc: stable@vger.kernel.org
Signed-off-by: Waiman Long <longman@redhat.com>
Tested-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18 09:18:08 +02:00
Sven Schwermer
a390b1cb30 USB: serial: option: add Fibocom MA510 modem
commit 07989eb981d862f7f2be68d233d753f2e7ccc119 upstream.

The MA510 modem has 3 USB configurations that are configurable via the AT
command AT+GTUSBMODE={30,31,32} which make the modem enumerate with the
following interfaces, respectively:

30: Diag + QDSS + Modem + RMNET
31: Diag + Modem + AT + ECM
32: Modem + AT + ECM

The first configuration (30) reuses u-blox R410M's VID/PID with
identical interface configuration.

A detailed description of the USB configuration for each mode follows:

+GTUSBMODE: 30
--------------
T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 19 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=05c6 ProdID=90b2 Rev= 0.00
S:  Manufacturer=Fibocom MA510 Modem
S:  Product=Fibocom MA510 Modem
S:  SerialNumber=55e2695b
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
E:  Ad=85(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

+GTUSBMODE: 31
--------------
T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#= 99 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0106 Rev= 0.00
S:  Manufacturer=Fibocom MA510 Modem
S:  Product=Fibocom MA510 Modem
S:  SerialNumber=55e2695b
C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
A:  FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
E:  Ad=84(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=86(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:  If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

+GTUSBMODE: 32
--------------
T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=100 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2cb7 ProdID=010a Rev= 0.00
S:  Manufacturer=Fibocom MA510 Modem
S:  Product=Fibocom MA510 Modem
S:  SerialNumber=55e2695b
C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
A:  FirstIf#= 2 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
E:  Ad=81(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option
E:  Ad=83(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=85(I) Atr=03(Int.) MxPS=  64 Ivl=2ms
I:  If#= 3 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18 09:18:08 +02:00
Sven Schwermer
c06d4652ec USB: serial: option: add Fibocom L610 modem
commit 714adff9a6271b5f1664b04c944b598141ebfe73 upstream.

The L610 modem has 3 USB configurations that are configurable via the AT
command AT+GTUSBMODE={31,32,33} which make the modem enumerate with the
following interfaces, respectively:

31: Modem + NV + MOS + Diag + LOG + AT + AT
32: ECM + Modem + NV + MOS + Diag + LOG + AT + AT
33: RNDIS + Modem + NV + MOS + Diag + LOG + AT + AT

A detailed description of the USB configuration for each mode follows:

+GTUSBMODE: 31
--------------
T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=124 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1782 ProdID=4d10 Rev= 0.00
S:  Manufacturer=FIBOCOM
S:  Product=L610
C:* #Ifs= 7 Cfg#= 1 Atr=e0 MxPwr=400mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

+GTUSBMODE: 32
--------------
T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=122 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1782 ProdID=4d11 Rev= 0.00
S:  Manufacturer=FIBOCOM
S:  Product=L610
C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA
A:  FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=06 Prot=00
I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

+GTUSBMODE: 33
--------------
T:  Bus=03 Lev=01 Prnt=01 Port=06 Cnt=04 Dev#=126 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1782 ProdID=4d11 Rev= 0.00
S:  Manufacturer=FIBOCOM
S:  Product=L610
C:* #Ifs= 9 Cfg#= 1 Atr=e0 MxPwr=400mA
A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=4096ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Sven Schwermer <sven.schwermer@disruptive-technologies.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18 09:18:08 +02:00
Ethan Yang
bfc9af1fbb USB: serial: qcserial: add support for Sierra Wireless EM7590
commit 870b1eee2d844727b06e238c121d260bc5645580 upstream.

Add support for Sierra Wireless EM7590 0xc080/0xc081 compositions.

Signed-off-by: Ethan Yang <etyang@sierrawireless.com>
Link: https://lore.kernel.org/r/20220425055840.5693-1-etyang@sierrawireless.com
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18 09:18:08 +02:00
Scott Chen
38a7be0d31 USB: serial: pl2303: add device id for HP LM930 Display
commit 26a08f8bad3e1f98d3153f939fb8cd330da4cb26 upstream.

Add the device id for the HPLM930Display which is a PL2303GC based
device.

Signed-off-by: Scott Chen <scott@labau.com.tw>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18 09:18:08 +02:00
Sergey Ryazanov
d353241a9f usb: cdc-wdm: fix reading stuck on device close
commit 01e01f5c89773c600a9f0b32c888de0146066c3a upstream.

cdc-wdm tracks whether a response reading request is in-progress and
blocks the next request from being sent until the previous request is
completed. As soon as last user closes the cdc-wdm device file, the
driver cancels any ongoing requests, resets the pending response
counter, but leaves the response reading in-progress flag
(WDM_RESPONDING) untouched.

So if the user closes the device file during the response receive
request is being performed, no more data will be obtained from the
modem. The request will be cancelled, effectively preventing the
WDM_RESPONDING flag from being reseted. Keeping the flag set will
prevent a new response receive request from being sent, permanently
blocking the read path. The read path will staying blocked until the
module will be reloaded or till the modem will be re-attached.

This stuck has been observed with a Huawei E3372 modem attached to an
OpenWrt router and using the comgt utility to set up a network
connection.

Fix this issue by clearing the WDM_RESPONDING flag on the device file
close.

Without this fix, the device reading stuck can be easily reproduced in a
few connection establishing attempts. With this fix, a load test for
modem connection re-establishing worked for several hours without any
issues.

Fixes: 922a5eadd5a3 ("usb: cdc-wdm: Fix race between autosuspend and reading from the device")
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220501175828.8185-1-ryazanov.s.a@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-18 09:18:07 +02:00
Eric Dumazet
a14619ff0d tcp: resalt the secret every 10 seconds
[ Upstream commit 4dfa9b438ee34caca4e6a4e5e961641807367f6f ]

In order to limit the ability for an observer to recognize the source
ports sequence used to contact a set of destinations, we should
periodically shuffle the secret. 10 seconds looks effective enough
without causing particular issues.

Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18 09:18:07 +02:00
Mark Brown
9e8cad4d3b ASoC: ops: Validate input values in snd_soc_put_volsw_range()
[ Upstream commit aa22125c57f9e577f0a667e4fa07fc3fa8ca1e60 ]

Check that values written via snd_soc_put_volsw_range() are
within the range advertised by the control, ensuring that we
don't write out of spec values to the hardware.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220423131239.3375261-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18 09:18:07 +02:00
Mark Brown
3218ecf66b ASoC: max98090: Generate notifications on changes for custom control
[ Upstream commit 13fcf676d9e102594effc686d98521ff5c90b925 ]

The max98090 driver has some custom controls which share a put() function
which returns 0 unconditionally, meaning that events are not generated
when the value changes. Fix that.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220420193454.2647908-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18 09:18:07 +02:00
Mark Brown
ee46fbb0d2 ASoC: max98090: Reject invalid values in custom control put()
[ Upstream commit 2fbe467bcbfc760a08f08475eea6bbd4c2874319 ]

The max98090 driver has a custom put function for some controls which can
only be updated in certain circumstances which makes no effort to validate
that input is suitable for the control, allowing out of spec values to be
written to the hardware and presented to userspace. Fix this by returning
an error when invalid values are written.

Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220420193454.2647908-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18 09:18:07 +02:00
Ji-Ze Hong (Peter Hong)
76e9dd91a8 hwmon: (f71882fg) Fix negative temperature
[ Upstream commit 4aaaaf0f279836f06d3b9d0ffeec7a1e1a04ceef ]

All temperature of Fintek superio hwmonitor that using 1-byte reg will use
2's complement.

In show_temp()
	temp = data->temp[nr] * 1000;

When data->temp[nr] read as 255, it indicate -1C, but this code will report
255C to userspace. It'll be ok when change to:
	temp = ((s8)data->temp[nr]) * 1000;

Signed-off-by: Ji-Ze Hong (Peter Hong) <hpeter+linux_kernel@gmail.com>
Link: https://lore.kernel.org/r/20220418090706.6339-1-hpeter+linux_kernel@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-18 09:18:07 +02:00