A couple tweaks to the tracing code:
- trace the request size for all requests
- trace request sector and nr_sectors only for fs requests, enforced by
helpers
- drop SCSI CDB tracing - we have SCSI tracing for this and are going
to me the CDB out of the generic struct request soon.
With this the tracing code stops to know about BLOCK_PC requests entirely,
it's just FS vs passthrough requests now, where the latter includes any
driver-private requests.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
When CONFIG_POSIX_TIMERS is disabled, it is preferable to remove related
structures from struct task_struct and struct signal_struct as they
won't contain anything useful and shouldn't be relied upon by mistake.
Code still referencing those structures is also disabled here.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Pull networking fixes from David Miller:
1) GTP fixes from Andreas Schultz (missing genl module alias, clear IP
DF on transmit).
2) Netfilter needs to reflect the fwmark when sending resets, from Pau
Espin Pedrol.
3) nftable dump OOPS fix from Liping Zhang.
4) Fix erroneous setting of VIRTIO_NET_HDR_F_DATA_VALID on transmit,
from Rolf Neugebauer.
5) Fix build error of ipt_CLUSTERIP when procfs is disabled, from Arnd
Bergmann.
6) Fix regression in handling of NETIF_F_SG in harmonize_features(),
from Eric Dumazet.
7) Fix RTNL deadlock wrt. lwtunnel module loading, from David Ahern.
8) tcp_fastopen_create_child() needs to setup tp->max_window, from
Alexey Kodanev.
9) Missing kmemdup() failure check in ipv6 segment routing code, from
Eric Dumazet.
10) Don't execute unix_bind() under the bindlock, otherwise we deadlock
with splice. From WANG Cong.
11) ip6_tnl_parse_tlv_enc_lim() potentially reallocates the skb buffer,
therefore callers must reload cached header pointers into that skb.
Fix from Eric Dumazet.
12) Fix various bugs in legacy IRQ fallback handling in alx driver, from
Tobias Regnery.
13) Do not allow lwtunnel drivers to be unloaded while they are
referenced by active instances, from Robert Shearman.
14) Fix truncated PHY LED trigger names, from Geert Uytterhoeven.
15) Fix a few regressions from virtio_net XDP support, from John
Fastabend and Jakub Kicinski.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (102 commits)
ISDN: eicon: silence misleading array-bounds warning
net: phy: micrel: add support for KSZ8795
gtp: fix cross netns recv on gtp socket
gtp: clear DF bit on GTP packet tx
gtp: add genl family modules alias
tcp: don't annotate mark on control socket from tcp_v6_send_response()
ravb: unmap descriptors when freeing rings
virtio_net: reject XDP programs using header adjustment
virtio_net: use dev_kfree_skb for small buffer XDP receive
r8152: check rx after napi is enabled
r8152: re-schedule napi for tx
r8152: avoid start_xmit to schedule napi when napi is disabled
r8152: avoid start_xmit to call napi_schedule during autosuspend
net: dsa: Bring back device detaching in dsa_slave_suspend()
net: phy: leds: Fix truncated LED trigger names
net: phy: leds: Break dependency of phy.h on phy_led_triggers.h
net: phy: leds: Clear phy_num_led_triggers on failure to avoid crash
net-next: ethernet: mediatek: change the compatible string
Documentation: devicetree: change the mediatek ethernet compatible string
bnxt_en: Fix RTNL lock usage on bnxt_get_port_module_status().
...
To make the code clearer, use rb_entry() instead of container_of() to
deal with rbtree.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Revert the recent change that caused suspend-to-idle to be used
as the default suspend method on systems where it is indicated to
be efficient by the ACPI tables, as that turned out to be premature
and introduced suspend regressions on some systems with missing
power management support in device drivers (Rafael Wysocki).
- Fix up the intel_pstate driver to take changes of the global
limits via sysfs correctly when the performance policy is used
which has been broken by a recent change in it (Srinivas Pandruvada).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=YF+u
-----END PGP SIGNATURE-----
Merge tag 'pm-4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two regressions introduced recently, one by reverting the
problematic commit and one by fixing up the behavior in an overlooked
case.
Specifics:
- Revert the recent change that caused suspend-to-idle to be used as
the default suspend method on systems where it is indicated to be
efficient by the ACPI tables, as that turned out to be premature
and introduced suspend regressions on some systems with missing
power management support in device drivers (Rafael Wysocki).
- Fix up the intel_pstate driver to take changes of the global limits
via sysfs correctly when the performance policy is used which has
been broken by a recent change in it (Srinivas Pandruvada)"
* tag 'pm-4.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Fix sysfs limits enforcement for performance policy
Revert "PM / sleep / ACPI: Use the ACPI_FADT_LOW_POWER_S0 flag"
While refactoring cgroup creation, a5bca2152036 ("cgroup: factor out
cgroup_create() out of cgroup_mkdir()") incorrectly onlined subsystems
before the new cgroup is associated with it kernfs_node. This is fine
for cgroup proper but cgroup_name/path() depend on the associated
kernfs_node and if a subsystem makes the new cgroup_subsys_state
visible, which they're allowed to after onlining, it can lead to NULL
dereference.
The current code performs cgroup creation and subsystem onlining in
cgroup_create() and cgroup_mkdir() makes the cgroup and subsystems
visible afterwards. There's no reason to online the subsystems early
and we can simply drop cgroup_apply_control_enable() call from
cgroup_create() so that the subsystems are onlined and made visible at
the same time.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes: a5bca2152036 ("cgroup: factor out cgroup_create() out of cgroup_mkdir()")
Cc: stable@vger.kernel.org # v4.6+
We perform the conversion between kernel jiffies and ms only when
exporting kernel value to user space.
We need to do the opposite operation when value is written by user.
Only matters when HZ != 1000
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Because there are no memory barriers between the srcu_flip() ->completed
increment and the summation of the read-side ->unlock_count[] counters,
both the compiler and the CPU can reorder the summation with the
->completed increment. If the updater is preempted long enough during
this process, the read-side counters could overflow, resulting in a
too-short grace period.
This commit therefore adds a memory barrier just after the ->completed
increment, ensuring that if the summation misses an increment of
->unlock_count[] from __srcu_read_unlock(), the next __srcu_read_lock()
will see the new value of ->completed, thus bounding the number of
->unlock_count[] increments that can be missed to NR_CPUS. The actual
overflow computation is more complex due to the possibility of nesting
of __srcu_read_lock().
Reported-by: Lance Roy <ldr709@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
If a process invokes synchronize_srcu(), is delayed just the right amount
of time, and thus does not sleep when waiting for the grace period to
complete, there is no ordering between the end of the grace period and
the code following the synchronize_srcu(). Similarly, there can be a
lack of ordering between the end of the SRCU grace period and callback
invocation.
This commit adds the necessary ordering.
Reported-by: Lance Roy <ldr709@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Further smp_mb() adjustment per email with Lance Roy. ]
SRCU uses two per-cpu counters: a nesting counter to count the number of
active critical sections, and a sequence counter to ensure that the nesting
counters don't change while they are being added together in
srcu_readers_active_idx_check().
This patch instead uses per-cpu lock and unlock counters. Because both
counters only increase and srcu_readers_active_idx_check() reads the unlock
counter before the lock counter, this achieves the same end without having
to increment two different counters in srcu_read_lock(). This also saves a
smp_mb() in srcu_readers_active_idx_check().
Possible bug: There is no guarantee that the lock counter won't overflow
during srcu_readers_active_idx_check(), as there are no memory barriers
around srcu_flip() (see comment in srcu_readers_active_idx_check() for
details). However, this problem was already present before this patch.
Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Lance Roy <ldr709@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This work adds a number of tracepoints to paths that are either
considered slow-path or exception-like states, where monitoring or
inspecting them would be desirable.
For bpf(2) syscall, tracepoints have been placed for main commands
when they succeed. In XDP case, tracepoint is for exceptions, that
is, f.e. on abnormal BPF program exit such as unknown or XDP_ABORTED
return code, or when error occurs during XDP_TX action and the packet
could not be forwarded.
Both have been split into separate event headers, and can be further
extended. Worst case, if they unexpectedly should get into our way in
future, they can also removed [1]. Of course, these tracepoints (like
any other) can be analyzed by eBPF itself, etc. Example output:
# ./perf record -a -e bpf:* sleep 10
# ./perf script
sock_example 6197 [005] 283.980322: bpf:bpf_map_create: map type=ARRAY ufd=4 key=4 val=8 max=256 flags=0
sock_example 6197 [005] 283.980721: bpf:bpf_prog_load: prog=a5ea8fa30ea6849c type=SOCKET_FILTER ufd=5
sock_example 6197 [005] 283.988423: bpf:bpf_prog_get_type: prog=a5ea8fa30ea6849c type=SOCKET_FILTER
sock_example 6197 [005] 283.988443: bpf:bpf_map_lookup_elem: map type=ARRAY ufd=4 key=[06 00 00 00] val=[00 00 00 00 00 00 00 00]
[...]
sock_example 6197 [005] 288.990868: bpf:bpf_map_lookup_elem: map type=ARRAY ufd=4 key=[01 00 00 00] val=[14 00 00 00 00 00 00 00]
swapper 0 [005] 289.338243: bpf:bpf_prog_put_rcu: prog=a5ea8fa30ea6849c type=SOCKET_FILTER
[1] https://lwn.net/Articles/705270/
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
For upcoming tracepoint support for BPF, we want to dump the program's
tag. Format should be similar to __print_hex(), but without spacing.
Add a __print_hex_str() variant for exactly that purpose that reuses
trace_print_hex_seq().
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge fixes from Andrew Morton:
"26 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (26 commits)
MAINTAINERS: add Dan Streetman to zbud maintainers
MAINTAINERS: add Dan Streetman to zswap maintainers
mm: do not export ioremap_page_range symbol for external module
mn10300: fix build error of missing fpu_save()
romfs: use different way to generate fsid for BLOCK or MTD
frv: add missing atomic64 operations
mm, page_alloc: fix premature OOM when racing with cpuset mems update
mm, page_alloc: move cpuset seqcount checking to slowpath
mm, page_alloc: fix fast-path race with cpuset update or removal
mm, page_alloc: fix check for NULL preferred_zone
kernel/panic.c: add missing \n
fbdev: color map copying bounds checking
frv: add atomic64_add_unless()
mm/mempolicy.c: do not put mempolicy before using its nodemask
radix-tree: fix private list warnings
Documentation/filesystems/proc.txt: add VmPin
mm, memcg: do not retry precharge charges
proc: add a schedule point in proc_pid_readdir()
mm: alloc_contig: re-allow CMA to compact FS pages
mm/slub.c: trace free objects at KERN_INFO
...
When a system panics, the "Rebooting in X seconds.." message is never
printed because it lacks a new line. Fix it.
Link: http://lkml.kernel.org/r/20170119114751.2724-1-jslaby@suse.cz
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On an overloaded system, it is possible that a change in the watchdog
threshold can be delayed long enough to trigger a false positive.
This can easily be achieved by having a cpu spinning indefinitely on a
task, while another cpu updates watchdog threshold.
What happens is while trying to park the watchdog threads, the hrtimers
on the other cpus trigger and reprogram themselves with the new slower
watchdog threshold. Meanwhile, the nmi watchdog is still programmed
with the old faster threshold.
Because the one cpu is blocked, it prevents the thread parking on the
other cpus from completing, which is needed to shutdown the nmi watchdog
and reprogram it correctly. As a result, a false positive from the nmi
watchdog is reported.
Fix this by setting a park_in_progress flag to block all lockups until
the parking is complete.
Fix provided by Ulrich Obergfell.
[akpm@linux-foundation.org: s/park_in_progress/watchdog_park_in_progress/]
Link: http://lkml.kernel.org/r/1481041033-192236-1-git-send-email-dzickus@redhat.com
Signed-off-by: Don Zickus <dzickus@redhat.com>
Reviewed-by: Aaron Tomlin <atomlin@redhat.com>
Cc: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull namespace fix from Eric Biederman:
"This has a single brown bag fix.
The possible deadlock with dec_pid_namespaces that I had thought was
fixed earlier turned out only to have been moved. So instead of being
cleaver this change takes ucounts_lock with irqs disabled. So
dec_ucount can be used from any context without fear of deadlock.
The items accounted for dec_ucount and inc_ucount are all
comparatively heavy weight objects so I don't exepct this will have
any measurable performance impact"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
userns: Make ucounts lock irq-safe
William reported couple of issues in relation to direct packet
access. Typical scheme is to check for data + [off] <= data_end,
where [off] can be either immediate or coming from a tracked
register that contains an immediate, depending on the branch, we
can then access the data. However, in case of calculating [off]
for either the mentioned test itself or for access after the test
in a more "complex" way, then the verifier will stop tracking the
CONST_IMM marked register and will mark it as UNKNOWN_VALUE one.
Adding that UNKNOWN_VALUE typed register to a pkt() marked
register, the verifier then bails out in check_packet_ptr_add()
as it finds the registers imm value below 48. In the first below
example, that is due to evaluate_reg_imm_alu() not handling right
shifts and thus marking the register as UNKNOWN_VALUE via helper
__mark_reg_unknown_value() that resets imm to 0.
In the second case the same happens at the time when r4 is set
to r4 &= r5, where it transitions to UNKNOWN_VALUE from
evaluate_reg_imm_alu(). Later on r4 we shift right by 3 inside
evaluate_reg_alu(), where the register's imm turns into 3. That
is, for registers with type UNKNOWN_VALUE, imm of 0 means that
we don't know what value the register has, and for imm > 0 it
means that the value has [imm] upper zero bits. F.e. when shifting
an UNKNOWN_VALUE register by 3 to the right, no matter what value
it had, we know that the 3 upper most bits must be zero now.
This is to make sure that ALU operations with unknown registers
don't overflow. Meaning, once we know that we have more than 48
upper zero bits, or, in other words cannot go beyond 0xffff offset
with ALU ops, such an addition will track the target register
as a new pkt() register with a new id, but 0 offset and 0 range,
so for that a new data/data_end test will be required. Is the source
register a CONST_IMM one that is to be added to the pkt() register,
or the source instruction is an add instruction with immediate
value, then it will get added if it stays within max 0xffff bounds.
>From there, pkt() type, can be accessed should reg->off + imm be
within the access range of pkt().
[...]
from 28 to 30: R0=imm1,min_value=1,max_value=1
R1=pkt(id=0,off=0,r=22) R2=pkt_end
R3=imm144,min_value=144,max_value=144
R4=imm0,min_value=0,max_value=0
R5=inv48,min_value=2054,max_value=2054 R10=fp
30: (bf) r5 = r3
31: (07) r5 += 23
32: (77) r5 >>= 3
33: (bf) r6 = r1
34: (0f) r6 += r5
cannot add integer value with 0 upper zero bits to ptr_to_packet
[...]
from 52 to 80: R0=imm1,min_value=1,max_value=1
R1=pkt(id=0,off=0,r=34) R2=pkt_end R3=inv
R4=imm272 R5=inv56,min_value=17,max_value=17
R6=pkt(id=0,off=26,r=34) R10=fp
80: (07) r4 += 71
81: (18) r5 = 0xfffffff8
83: (5f) r4 &= r5
84: (77) r4 >>= 3
85: (0f) r1 += r4
cannot add integer value with 3 upper zero bits to ptr_to_packet
Thus to get above use-cases working, evaluate_reg_imm_alu() has
been extended for further ALU ops. This is fine, because we only
operate strictly within realm of CONST_IMM types, so here we don't
care about overflows as they will happen in the simulated but also
real execution and interaction with pkt() in check_packet_ptr_add()
will check actual imm value once added to pkt(), but it's irrelevant
before.
With regards to 06c1c049721a ("bpf: allow helpers access to variable
memory") that works on UNKNOWN_VALUE registers, the verifier becomes
now a bit smarter as it can better resolve ALU ops, so we need to
adapt two test cases there, as min/max bound tracking only becomes
necessary when registers were spilled to stack. So while mask was
set before to track upper bound for UNKNOWN_VALUE case, it's now
resolved directly as CONST_IMM, and such contructs are only necessary
when f.e. registers are spilled.
For commit 6b17387307ba ("bpf: recognize 64bit immediate loads as
consts") that initially enabled dw load tracking only for nfp jit/
analyzer, I did couple of tests on large, complex programs and we
don't increase complexity badly (my tests were in ~3% range on avg).
I've added a couple of tests similar to affected code above, and
it works fine with verifier now.
Reported-by: William Tu <u9012063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Gianluca Borello <g.borello@gmail.com>
Cc: William Tu <u9012063@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to initialize im_node to NULL, otherwise in case of error path
it gets passed to kfree() as uninitialized pointer.
Fixes: b95a5c4db09b ("bpf: add a longest prefix match trie map implementation")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This trie implements a longest prefix match algorithm that can be used
to match IP addresses to a stored set of ranges.
Internally, data is stored in an unbalanced trie of nodes that has a
maximum height of n, where n is the prefixlen the trie was created
with.
Tries may be created with prefix lengths that are multiples of 8, in
the range from 8 to 2048. The key used for lookup and update operations
is a struct bpf_lpm_trie_key, and the value is a uint64_t.
The code carries more information about the internal implementation.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 7ec99de36f40 ("rcu: Provide exact CPU-online tracking for RCU"),
as its title suggests, got rid of RCU's remaining CPU-hotplug timing
guesswork. This commit therefore removes the one-jiffy kludge that was
used to paper over this guesswork.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Commit 4a81e8328d37 ("rcu: Reduce overhead of cond_resched() checks
for RCU") moved quiescent-state generation out of cond_resched()
and commit bde6c3aa9930 ("rcu: Provide cond_resched_rcu_qs() to force
quiescent states in long loops") introduced cond_resched_rcu_qs(), and
commit 5cd37193ce85 ("rcu: Make cond_resched_rcu_qs() apply to normal RCU
flavors") introduced the per-CPU rcu_qs_ctr variable, which is frequently
polled by the RCU core state machine.
This frequent polling can increase grace-period rate, which in turn
increases grace-period overhead, which is visible in some benchmarks
(for example, the "open1" benchmark in Anton Blanchard's "will it scale"
suite). This commit therefore reduces the rate at which rcu_qs_ctr
is polled by moving that polling into the force-quiescent-state (FQS)
machinery, and by further polling it only after the grace period has
been in effect for at least jiffies_till_sched_qs jiffies.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit is the fourth step towards full abstraction of all accesses
to the ->dynticks counter, implementing previously open-coded checks and
comparisons in new rcu_dynticks_in_eqs() and rcu_dynticks_in_eqs_since()
functions. This abstraction will ease changes to the ->dynticks counter
operation.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit is the third step towards full abstraction of all accesses
to the ->dynticks counter, implementing the previously open-coded atomic
add of 1 and entry checks in a new rcu_dynticks_eqs_enter() function, and
the same but with exit checks in a new rcu_dynticks_eqs_exit() function.
This abstraction will ease changes to the ->dynticks counter operation.
Note that this commit gets rid of the smp_mb__before_atomic() and the
smp_mb__after_atomic() calls that were previously present. The reason
that this is OK from a memory-ordering perspective is that the atomic
operation is now atomic_add_return(), which, as a value-returning atomic,
guarantees full ordering.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[ paulmck: Fixed RCU_TRACE() statements added by this commit. ]
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The non-expedited synchronize_*rcu() primitives have lockdep checks, but
their expedited counterparts lack these checks. This commit therefore
adds these checks to the expedited synchronize_*rcu() primitives.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Expedited grace periods no longer fall back to normal grace periods
in response to lock contention, given that expedited grace periods
now use the rcu_node tree so as to avoid contention. This commit
therfore removes the expedited_normal counter.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
It used to be that the rcuo callback-offload kthreads were spawned
in rcu_organize_nocb_kthreads(), and the comment before the "for"
loop says as much. However, this spawning has long since moved to
the CPU-hotplug code, so this commit fixes this comment.
Reported-by: Michalis Kokologiannakis <mixaskok@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The rcu_cpu_starting() function uses this_cpu_ptr() to locate the
incoming CPU's rcu_data structure. This works for the boot CPU and for
all CPUs onlined after rcu_init() executes (during very early boot).
Currently, this is the full set of CPUs, so all is well. But if
anyone ever parallelizes boot before rcu_init() time, it will fail.
This commit therefore substitutes the rcu_cpu_starting() function's
this_cpu_pointer() for per_cpu_ptr(), future-proofing the code and
(arguably) improving readability.
This commit inadvertently fixes a latent bug: If there ever had been
more than just the boot CPU online at rcu_init() time, the old code
would not initialize the non-boot CPUs, but rather would repeatedly
initialize the boot CPU.
Reported-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
These functions (rcu_exp_gp_seq_start(), rcu_exp_gp_seq_end(),
rcu_exp_gp_seq_snap(), and rcu_exp_gp_seq_done() seemed too obvious
to comment when written, but not so much when being documented.
This commit therefore adds header comments to each of them.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Chris Friesen notice that rcuc/X kthreads were consuming CPU even on
NOCB CPUs. This makes no sense because the only purpose or these
kthreads is to invoke normal (non-offloaded) callbacks, of which there
will never be any on NOCB CPUs. This problem was due to a bug in
cpu_has_callbacks_ready_to_invoke(), which should have been checking
->nxttail[RCU_NEXT_TAIL] for NULL, but which was instead (incorrectly)
checking ->nxttail[RCU_DONE_TAIL]. Because ->nxttail[RCU_DONE_TAIL] is
never NULL, the only effect is to cause the rcuc/X kthread to execute
when it should not do so.
This commit therefore checks ->nxttail[RCU_NEXT_TAIL], which is NULL
for NOCB CPUs.
Reported-by: Chris Friesen <chris.friesen@windriver.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit is for all intents and purposes a revert of bc1dce514e9b
("rcu: Don't use NMIs to dump other CPUs' stacks"). The reason to suppose
that this can now safely be reverted is the presence of 42a0bb3f7138
("printk/nmi: generic solution for safe printk in NMI"), which is said
to have made NMI-based stack dumps safe.
However, this reversion keeps one nice property of bc1dce514e9b
("rcu: Don't use NMIs to dump other CPUs' stacks"), namely that
only those CPUs blocking the grace period are dumped. The new
trigger_single_cpu_backtrace() is used to make this happen, as
suggested by Josh Poimboeuf.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Commit 4914950aaa12d ("rcu: Stop treating in-kernel CPU-bound workloads
as errors") added a (relatively) short-timeout call to resched_cpu().
This was inspired by as issue that was fixed by b7e7ade34e61 ("sched/core:
Fix remote wakeups"). But given that this issue was fixed, it is time
for the current commit to remove this call to resched_cpu().
Reported-by: Byungchul Park <byungchul.park@lge.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit prepares for the removal of short-term CPU kicking (in a
subsequent commit). It does so by starting to invoke resched_cpu()
for each holdout at each force-quiescent-state interval that is more
than halfway through the stall-warning interval.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Since commit 7ec99de36f40 ("rcu: Provide exact CPU-online tracking for
RCU"), the variable mask in rcu_init_percpu_data is set but no longer
used. Remove it to fix the following warning when building with 'W=1':
kernel/rcu/tree.c: In function ‘rcu_init_percpu_data’:
kernel/rcu/tree.c:3765:16: warning: variable ‘mask’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The declarations of __rcu_process_callbacks() and rcu_process_callbacks()
are not needed, as the definition of both of these functions appear before
any uses. This commit therefore removes both declarations.
Reported-by: "Ahmed, Iftekhar" <ahmedi@oregonstate.edu>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
The print_other_cpu_stall() function currently unconditionally invokes
rcu_print_detail_task_stall(). This is OK because if there was a stall
sufficient to cause print_other_cpu_stall() to be invoked, that stall
is very likely to persist through the entire print_other_cpu_stall()
execution. However, if the stall did not persist, the variable ndetected
will be zero, and that variable is already tested in an "if" statement.
Therefore, this commit moves the call to rcu_print_detail_task_stall()
under that pre-existing "if" to improve readability, with a very rare
reduction in overhead.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
[ paulmck: Reworked commit log. ]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Userspace applications should be allowed to expect the membarrier system
call with MEMBARRIER_CMD_SHARED command to issue memory barriers on
nohz_full CPUs, but synchronize_sched() does not take those into
account.
Given that we do not want unrelated processes to be able to affect
real-time sensitive nohz_full CPUs, simply return ENOSYS when membarrier
is invoked on a kernel with enabled nohz_full CPUs.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
CC: Josh Triplett <josh@joshtriplett.org>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: <stable@vger.kernel.org> [3.10+]
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Rik van Riel <riel@redhat.com>
Acked-by: Lai Jiangshan <jiangshanlai@gmail.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
This commit switches RCU suspicious-access splats use pr_err()
instead of the current INFO printk()s. This change makes it easier
to automatically classify splats.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This new function checks whether all MSI irq domains
implement IRQ remapping. This is useful to understand
whether VFIO passthrough is safe with respect to interrupts.
On ARM typically an MSI controller can sit downstream
to the IOMMU without preventing VFIO passthrough.
As such any assigned device can write into the MSI doorbell.
In case the MSI controller implements IRQ remapping, assigned
devices will not be able to trigger interrupts towards the
host. On the contrary, the assignment must be emphasized as
unsafe with respect to interrupts.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com>
Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com>
Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Now we have a flag value indicating an IRQ domain implements MSI,
let's set it on msi_create_irq_domain().
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com>
Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
We introduce two new enum values for the irq domain flag:
- IRQ_DOMAIN_FLAG_MSI indicates the irq domain corresponds to
an MSI domain
- IRQ_DOMAIN_FLAG_MSI_REMAP indicates the irq domain has MSI
remapping capabilities.
Those values will be useful to check all MSI irq domains have
MSI remapping support when assessing the safety of IRQ assignment
to a guest.
irq_domain_hierarchical_is_msi_remap() allows to check if an
irq domain or any parent implements MSI remapping.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com>
Tested-by: Tomasz Nowicki <tomasz.nowicki@caviumnetworks.com>
Tested-by: Bharat Bhushan <bharat.bhushan@nxp.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The SECCOMP_RET_KILL mode is documented as immediately killing the
process as if a SIGSYS had been sent and not caught (similar to a
SIGKILL). However, a SIGSYS is documented as triggering a coredump
which does not happen today.
This has the advantage of being able to more easily debug a process
that fails a seccomp filter. Today, most apps need to recompile and
change their filter in order to get detailed info out, or manually run
things through strace, or enable detailed kernel auditing. Now we get
coredumps that fit into existing system-wide crash reporting setups.
From a security pov, this shouldn't be a problem. Unhandled signals
can already be sent externally which trigger a coredump independent of
the status of the seccomp filter. The act of dumping core itself does
not cause change in execution of the program.
URL: https://crbug.com/676357
Signed-off-by: Mike Frysinger <vapier@chromium.org>
Acked-by: Jorge Lucangeli Obes <jorgelo@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Pull smp/hotplug fix from Thomas Gleixner:
"Remove an unused variable which is a leftover from the notifier
removal"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Remove unused but set variable in _cpu_down()
In __rwsem_down_write_failed_common(), the same wake_q variable name
is defined twice, with the inner wake_q hiding the one in outer scope.
We can either use different names for the two wake_q's.
Even better, we can use the same wake_q twice, if necessary.
To enable the latter change, we need to define a new helper function
wake_q_init() to enable reinitalization of wake_q after use.
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1485052415-9611-1-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
