ttwu_remote() unconditionally locks the task's runqueue lock, which implies
a full barrier across the lock and unlock, so the acquire barrier after the
control dependency is only needed when the task isn't on the runqueue.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: azrim <mirzaspc@gmail.com>
Although supported_cpus may indicate that the PMU counters can be read from
any CPU, the perf event core doesn't know that and instead resorts to
reading PMU counters on a specific CPU using costly IPIs.
Let perf know that the PMU counters can be read remotely by copying the
supported_cpus mask into readable_on_cpus.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: azrim <mirzaspc@gmail.com>
The debug cruft here shows up in `perf top` via elevated usage of
arch_counter_get_cntvct(). Since this debug cruft isn't actually useful to
us, just remove it all to get rid of the overhead.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: azrim <mirzaspc@gmail.com>
Unbound workqueues do not participate in workqueue concurrency management,
and users of unbound workqueues are instead expected to handle concurrency
management themselves. This is problematic for ION since there's no limit
on the concurrency of buffer-free workers, meaning that they can starve
other SCHED_NORMAL processes which have the same nice value of zero or a
higher nice value.
The default number of workers allowed to run concurrently on *each* CPU in
an unbound workqueue's allowed CPUs is WQ_DFL_ACTIVE, which is a whopping
256 workers *per CPU*. This is way too high.
Reduce the number of concurrent buffer free workers to just one per CPU to
prevent them from starving other processes. Note that this cannot be done
by simply passing 1 to @max_active in alloc_workqueue() because doing so
with WQ_UNBOUND results in the workqueue becoming implicitly ordered and
thus only allowing a single worker to run at a time within the entire
workqueue. Instead, this is achieved using workqueue_set_max_active(),
which is the designated override for the implicit ordering quirk.
Also, remove WQ_CPU_INTENSIVE since it's redundant when WQ_UNBOUND is set.
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: azrim <mirzaspc@gmail.com>
The asynchronous zspage free worker tries to lock a zspage's entire page
list without defending against page migration. Since pages which haven't
yet been locked can concurrently migrate off the zspage page list while
lock_zspage() churns away, lock_zspage() can suffer from a few different
lethal races. It can lock a page which no longer belongs to the zspage and
unsafely dereference page_private(), it can unsafely dereference a torn
pointer to the next page (since there's a data race), and it can observe a
spurious NULL pointer to the next page and thus not lock all of the
zspage's pages (since a single page migration will reconstruct the entire
page list, and create_page_chain() unconditionally zeroes out each list
pointer in the process).
Fix the races by using migrate_read_lock() in lock_zspage() to synchronize
with page migration.
Fixes: 77ff465799c602 ("zsmalloc: zs_page_migrate: skip unnecessary loops but not return -EBUSY if zspage is not inuse")
Signed-off-by: Sultan Alsawaf <sultan@kerneltoast.com>
Signed-off-by: azrim <mirzaspc@gmail.com>
* google/android-4.14-stable:
Linux 4.14.278
PCI: aardvark: Fix reading MSI interrupt number
PCI: aardvark: Clear all MSIs at setup
dm: interlock pending dm_io and dm_wait_for_bios_completion
dm: fix mempool NULL pointer race when completing IO
net: ipv6: ensure we call ipv6_mc_down() at most once
kvm: x86/cpuid: Only provide CPUID leaf 0xA if host has architectural PMU
net: igmp: respect RCU rules in ip_mc_source() and ip_mc_msfilter()
btrfs: always log symlinks in full mode
smsc911x: allow using IRQ0
net: emaclite: Add error handling for of_address_to_resource()
ASoC: dmaengine: Restore NULL prepare_slave_config() callback
hwmon: (adt7470) Fix warning on module removal
NFC: netlink: fix sleep in atomic bug when firmware download timeout
nfc: nfcmrvl: main: reorder destructive operations in nfcmrvl_nci_unregister_dev to avoid bugs
nfc: replace improper check device_is_registered() in netlink related functions
can: grcan: use ofdev->dev when allocating DMA memory
can: grcan: grcan_close(): fix deadlock
ASoC: wm8958: Fix change notifications for DSP controls
firewire: core: extend card->lock in fw_core_handle_bus_reset
firewire: remove check of list iterator against head past the loop body
firewire: fix potential uaf in outbound_phy_packet_callback()
Revert "SUNRPC: attempt AF_LOCAL connect on setup"
ALSA: fireworks: fix wrong return count shorter than expected by 4 bytes
parisc: Merge model and model name into one line in /proc/cpuinfo
MIPS: Fix CP0 counter erratum detection for R4k CPUs
drm/vgem: Close use-after-free race in vgem_gem_create
tty: n_gsm: fix incorrect UA handling
tty: n_gsm: fix wrong command frame length field encoding
tty: n_gsm: fix wrong command retry handling
tty: n_gsm: fix missing explicit ldisc flush
tty: n_gsm: fix insufficient txframe size
tty: n_gsm: fix malformed counter for out of frame data
tty: n_gsm: fix wrong signal octet encoding in convergence layer type 2
x86/cpu: Load microcode during restore_processor_state()
drivers: net: hippi: Fix deadlock in rr_close()
cifs: destage any unwritten data to the server before calling copychunk_write
x86: __memcpy_flushcache: fix wrong alignment if size > 2^32
ASoC: wm8731: Disable the regulator when probing fails
bnx2x: fix napi API usage sequence
net: bcmgenet: hide status block before TX timestamping
clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource()
bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create()
tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT
ip_gre: Make o_seqno start from 0 in native mode
pinctrl: pistachio: fix use of irq_of_parse_and_map()
sctp: check asoc strreset_chunk in sctp_generate_reconf_event
mtd: rawnand: Fix return value check of wait_for_completion_timeout
ipvs: correctly print the memory size of ip_vs_conn_tab
ARM: dts: Fix mmc order for omap3-gta04
ARM: OMAP2+: Fix refcount leak in omap_gic_of_init
phy: samsung: exynos5250-sata: fix missing device put in probe error paths
phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probe
ARM: dts: imx6qdl-apalis: Fix sgtl5000 detection issue
USB: Fix xhci event ring dequeue pointer ERDP update issue
hex2bin: fix access beyond string end
hex2bin: make the function hex_to_bin constant-time
serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device
serial: 8250: Also set sticky MCR bits in console restoration
usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind()
usb: gadget: uvc: Fix crash when encoding data for usb request
usb: misc: fix improper handling of refcount in uss720_probe()
iio: magnetometer: ak8975: Fix the error handling in ak8975_power_on()
iio: dac: ad5446: Fix read_raw not returning set value
iio: dac: ad5592r: Fix the missing return value.
xhci: stop polling roothubs after shutdown
USB: serial: option: add Telit 0x1057, 0x1058, 0x1075 compositions
USB: serial: option: add support for Cinterion MV32-WA/MV32-WB
USB: serial: cp210x: add PIDs for Kamstrup USB Meter Reader
USB: serial: whiteheat: fix heap overflow in WHITEHEAT_GET_DTR_RTS
USB: quirks: add STRING quirk for VCOM device
USB: quirks: add a Realtek card reader
usb: mtu3: fix USB 3.0 dual-role-switch from device to host
lightnvm: disable the subsystem
Revert "net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link"
net/sched: cls_u32: fix netns refcount changes in u32_change()
hamradio: remove needs_free_netdev to avoid UAF
hamradio: defer 6pack kfree after unregister_netdev
floppy: disable FDRAWCMD by default
-----BEGIN PGP SIGNATURE-----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=SkoU
-----END PGP SIGNATURE-----
Merge 4.14.278 into android-4.14-stable
Changes in 4.14.278
floppy: disable FDRAWCMD by default
hamradio: defer 6pack kfree after unregister_netdev
hamradio: remove needs_free_netdev to avoid UAF
net/sched: cls_u32: fix netns refcount changes in u32_change()
Revert "net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link"
lightnvm: disable the subsystem
usb: mtu3: fix USB 3.0 dual-role-switch from device to host
USB: quirks: add a Realtek card reader
USB: quirks: add STRING quirk for VCOM device
USB: serial: whiteheat: fix heap overflow in WHITEHEAT_GET_DTR_RTS
USB: serial: cp210x: add PIDs for Kamstrup USB Meter Reader
USB: serial: option: add support for Cinterion MV32-WA/MV32-WB
USB: serial: option: add Telit 0x1057, 0x1058, 0x1075 compositions
xhci: stop polling roothubs after shutdown
iio: dac: ad5592r: Fix the missing return value.
iio: dac: ad5446: Fix read_raw not returning set value
iio: magnetometer: ak8975: Fix the error handling in ak8975_power_on()
usb: misc: fix improper handling of refcount in uss720_probe()
usb: gadget: uvc: Fix crash when encoding data for usb request
usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind()
serial: 8250: Also set sticky MCR bits in console restoration
serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device
hex2bin: make the function hex_to_bin constant-time
hex2bin: fix access beyond string end
USB: Fix xhci event ring dequeue pointer ERDP update issue
ARM: dts: imx6qdl-apalis: Fix sgtl5000 detection issue
phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probe
phy: samsung: exynos5250-sata: fix missing device put in probe error paths
ARM: OMAP2+: Fix refcount leak in omap_gic_of_init
ARM: dts: Fix mmc order for omap3-gta04
ipvs: correctly print the memory size of ip_vs_conn_tab
mtd: rawnand: Fix return value check of wait_for_completion_timeout
sctp: check asoc strreset_chunk in sctp_generate_reconf_event
pinctrl: pistachio: fix use of irq_of_parse_and_map()
ip_gre: Make o_seqno start from 0 in native mode
tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT
bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create()
clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource()
net: bcmgenet: hide status block before TX timestamping
bnx2x: fix napi API usage sequence
ASoC: wm8731: Disable the regulator when probing fails
x86: __memcpy_flushcache: fix wrong alignment if size > 2^32
cifs: destage any unwritten data to the server before calling copychunk_write
drivers: net: hippi: Fix deadlock in rr_close()
x86/cpu: Load microcode during restore_processor_state()
tty: n_gsm: fix wrong signal octet encoding in convergence layer type 2
tty: n_gsm: fix malformed counter for out of frame data
tty: n_gsm: fix insufficient txframe size
tty: n_gsm: fix missing explicit ldisc flush
tty: n_gsm: fix wrong command retry handling
tty: n_gsm: fix wrong command frame length field encoding
tty: n_gsm: fix incorrect UA handling
drm/vgem: Close use-after-free race in vgem_gem_create
MIPS: Fix CP0 counter erratum detection for R4k CPUs
parisc: Merge model and model name into one line in /proc/cpuinfo
ALSA: fireworks: fix wrong return count shorter than expected by 4 bytes
Revert "SUNRPC: attempt AF_LOCAL connect on setup"
firewire: fix potential uaf in outbound_phy_packet_callback()
firewire: remove check of list iterator against head past the loop body
firewire: core: extend card->lock in fw_core_handle_bus_reset
ASoC: wm8958: Fix change notifications for DSP controls
can: grcan: grcan_close(): fix deadlock
can: grcan: use ofdev->dev when allocating DMA memory
nfc: replace improper check device_is_registered() in netlink related functions
nfc: nfcmrvl: main: reorder destructive operations in nfcmrvl_nci_unregister_dev to avoid bugs
NFC: netlink: fix sleep in atomic bug when firmware download timeout
hwmon: (adt7470) Fix warning on module removal
ASoC: dmaengine: Restore NULL prepare_slave_config() callback
net: emaclite: Add error handling for of_address_to_resource()
smsc911x: allow using IRQ0
btrfs: always log symlinks in full mode
net: igmp: respect RCU rules in ip_mc_source() and ip_mc_msfilter()
kvm: x86/cpuid: Only provide CPUID leaf 0xA if host has architectural PMU
net: ipv6: ensure we call ipv6_mc_down() at most once
dm: fix mempool NULL pointer race when completing IO
dm: interlock pending dm_io and dm_wait_for_bios_completion
PCI: aardvark: Clear all MSIs at setup
PCI: aardvark: Fix reading MSI interrupt number
Linux 4.14.278
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ic228df2ab4834dc5c32776a73c80f3d649dbbcd9
commit 805dfc18dd3d4dd97a987d4406593b5a225b1253 upstream.
In advk_pcie_handle_msi() it is expected that when bit i in the W1C
register PCIE_MSI_STATUS_REG is cleared, the PCIE_MSI_PAYLOAD_REG is
updated to contain the MSI number corresponding to index i.
Experiments show that this is not so, and instead PCIE_MSI_PAYLOAD_REG
always contains the number of the last received MSI, overall.
Do not read PCIE_MSI_PAYLOAD_REG register for determining MSI interrupt
number. Since Aardvark already forbids more than 32 interrupts and uses
own allocated hwirq numbers, the msi_idx already corresponds to the
received MSI number.
Link: https://lore.kernel.org/r/20220110015018.26359-3-kabel@kernel.org
Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7d8dc1f7cd007a7ce94c5b4c20d63a8b8d6d7751 upstream.
We already clear all the other interrupts (ISR0, ISR1, HOST_CTRL_INT).
Define a new macro PCIE_MSI_ALL_MASK and do the same clearing for MSIs,
to ensure that we don't start receiving spurious interrupts.
Use this new mask in advk_pcie_handle_msi();
Link: https://lore.kernel.org/r/20211130172913.9727-5-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f6dc633761006f974701d4c88da71ab68670749 upstream.
Commit d208b89401e0 ("dm: fix mempool NULL pointer race when
completing IO") didn't go far enough.
When bio_end_io_acct ends the count of in-flight I/Os may reach zero
and the DM device may be suspended. There is a possibility that the
suspend races with dm_stats_account_io.
Fix this by adding percpu "pending_io" counters to track outstanding
dm_io. Move kicking of suspend queue to dm_io_dec_pending(). Also,
rename md_in_flight_bios() to dm_in_flight_bios() and update it to
iterate all pending_io counters.
Fixes: d208b89401e0 ("dm: fix mempool NULL pointer race when completing IO")
Cc: stable@vger.kernel.org
Co-developed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9995b408f17ff8c7f11bc725c8aa225ba3a63b1c upstream.
There are two reasons for addrconf_notify() to be called with NETDEV_DOWN:
either the network device is actually going down, or IPv6 was disabled
on the interface.
If either of them stays down while the other is toggled, we repeatedly
call the code for NETDEV_DOWN, including ipv6_mc_down(), while never
calling the corresponding ipv6_mc_up() in between. This will cause a
new entry in idev->mc_tomb to be allocated for each multicast group
the interface is subscribed to, which in turn leaks one struct ifmcaddr6
per nontrivial multicast group the interface is subscribed to.
The following reproducer will leak at least $n objects:
ip addr add ff2e::4242/32 dev eth0 autojoin
sysctl -w net.ipv6.conf.eth0.disable_ipv6=1
for i in $(seq 1 $n); do
ip link set up eth0; ip link set down eth0
done
Joining groups with IPV6_ADD_MEMBERSHIP (unprivileged) or setting the
sysctl net.ipv6.conf.eth0.forwarding to 1 (=> subscribing to ff02::2)
can also be used to create a nontrivial idev->mc_list, which will the
leak objects with the right up-down-sequence.
Based on both sources for NETDEV_DOWN events the interface IPv6 state
should be considered:
- not ready if the network interface is not ready OR IPv6 is disabled
for it
- ready if the network interface is ready AND IPv6 is enabled for it
The functions ipv6_mc_up() and ipv6_down() should only be run when this
state changes.
Implement this by remembering when the IPv6 state is ready, and only
run ipv6_mc_down() if it actually changed from ready to not ready.
The other direction (not ready -> ready) already works correctly, as:
- the interface notification triggered codepath for NETDEV_UP /
NETDEV_CHANGE returns early if ipv6 is disabled, and
- the disable_ipv6=0 triggered codepath skips fully initializing the
interface as long as addrconf_link_ready(dev) returns false
- calling ipv6_mc_up() repeatedly does not leak anything
Fixes: 3ce62a84d53c ("ipv6: exit early in addrconf_notify() if IPv6 is disabled")
Signed-off-by: Johannes Nixdorf <j.nixdorf@avm.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
[jnixdorf: context updated for bpo to v4.9/v4.14]
Signed-off-by: Johannes Nixdorf <j.nixdorf@avm.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5a1bde46f98b893cda6122b00e94c0c40a6ead3c ]
On some x86 processors, CPUID leaf 0xA provides information
on Architectural Performance Monitoring features. It
advertises a PMU version which Qemu uses to determine the
availability of additional MSRs to manage the PMCs.
Upon receiving a KVM_GET_SUPPORTED_CPUID ioctl request for
the same, the kernel constructs return values based on the
x86_pmu_capability irrespective of the vendor.
This leaf and the additional MSRs are not supported on AMD
and Hygon processors. If AMD PerfMonV2 is detected, the PMU
version is set to 2 and guest startup breaks because of an
attempt to access a non-existent MSR. Return zeros to avoid
this.
Fixes: a6c06ed1a60a ("KVM: Expose the architectural performance monitoring CPUID leaf")
Reported-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Message-Id: <3fef83d9c2b2f7516e8ff50d60851f29a4bcb716.1651058600.git.sandipan.das@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d0e64a981fd841cb0f28fcd6afcac55e6f1e6994 upstream.
On Linux, empty symlinks are invalid, and attempting to create one with
the system call symlink(2) results in an -ENOENT error and this is
explicitly documented in the man page.
If we rename a symlink that was created in the current transaction and its
parent directory was logged before, we actually end up logging the symlink
without logging its content, which is stored in an inline extent. That
means that after a power failure we can end up with an empty symlink,
having no content and an i_size of 0 bytes.
It can be easily reproduced like this:
$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt
$ mkdir /mnt/testdir
$ sync
# Create a file inside the directory and fsync the directory.
$ touch /mnt/testdir/foo
$ xfs_io -c "fsync" /mnt/testdir
# Create a symlink inside the directory and then rename the symlink.
$ ln -s /mnt/testdir/foo /mnt/testdir/bar
$ mv /mnt/testdir/bar /mnt/testdir/baz
# Now fsync again the directory, this persist the log tree.
$ xfs_io -c "fsync" /mnt/testdir
<power failure>
$ mount /dev/sdc /mnt
$ stat -c %s /mnt/testdir/baz
0
$ readlink /mnt/testdir/baz
$
Fix this by always logging symlinks in full mode (LOG_INODE_ALL), so that
their content is also logged.
A test case for fstests will follow.
CC: stable@vger.kernel.org # 4.9+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ef9b803a4af0f5e42012176889b40bb2a978b18 upstream.
The AlphaProject AP-SH4A-3A/AP-SH4AD-0A SH boards use IRQ0 for their SMSC
LAN911x Ethernet chip, so the networking on them must have been broken by
commit 965b2aa78fbc ("net/smsc911x: fix irq resource allocation failure")
which filtered out 0 as well as the negative error codes -- it was kinda
correct at the time, as platform_get_irq() could return 0 on of_irq_get()
failure and on the actual 0 in an IRQ resource. This issue was fixed by
me (back in 2016!), so we should be able to fix this driver to allow IRQ0
usage again...
When merging this to the stable kernels, make sure you also merge commit
e330b9a6bb35 ("platform: don't return 0 from platform_get_irq[_byname]()
on error") -- that's my fix to platform_get_irq() for the DT platforms...
Fixes: 965b2aa78fbc ("net/smsc911x: fix irq resource allocation failure")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/656036e4-6387-38df-b8a7-6ba683b16e63@omp.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7a6bc33ab54923d325d9a1747ec9652c4361ebd1 upstream.
check the return value of of_address_to_resource() and also add
missing of_node_put() for np and npp nodes.
Fixes: e0a3bc65448c ("net: emaclite: Support multiple phys connected to one MDIO bus")
Addresses-Coverity: Event check_return value.
Signed-off-by: Shravya Kumbham <shravya.kumbham@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 660564fc9a92a893a14f255be434f7ea0b967901 upstream.
As pointed out by Sascha Hauer, this patch changes:
if (pmc->config && !pcm->config->prepare_slave_config)
<do nothing>
to:
if (pmc->config && !pcm->config->prepare_slave_config)
snd_dmaengine_pcm_prepare_slave_config()
This breaks the drivers that do not need a call to
dmaengine_slave_config(). Drivers that still need to call
snd_dmaengine_pcm_prepare_slave_config(), but have a NULL
pcm->config->prepare_slave_config should use
snd_dmaengine_pcm_prepare_slave_config() as their prepare_slave_config
callback.
Fixes: 9a1e13440a4f ("ASoC: dmaengine: do not use a NULL prepare_slave_config() callback")
Reported-by: Sascha Hauer <sha@pengutronix.de>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220421125403.2180824-1-codrin.ciubotariu@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7b2666ce445c700b8dcee994da44ddcf050a0842 upstream.
When removing the adt7470 module, a warning might be printed:
do not call blocking ops when !TASK_RUNNING; state=1
set at [<ffffffffa006052b>] adt7470_update_thread+0x7b/0x130 [adt7470]
This happens because adt7470_update_thread() can leave the kthread in
TASK_INTERRUPTIBLE state when the kthread is being stopped before
the call of set_current_state(). Since kthread_exit() might sleep in
exit_signals(), the warning is printed.
Fix that by using schedule_timeout_interruptible() and removing
the call of set_current_state().
This causes TASK_INTERRUPTIBLE to be set after kthread_should_stop()
which might cause the kthread to exit.
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Fixes: 93cacfd41f82 (hwmon: (adt7470) Allow faster removal)
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Tested-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220407101312.13331-1-W_Armin@gmx.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4071bf121d59944d5cd2238de0642f3d7995a997 upstream.
There are sleep in atomic bug that could cause kernel panic during
firmware download process. The root cause is that nlmsg_new with
GFP_KERNEL parameter is called in fw_dnld_timeout which is a timer
handler. The call trace is shown below:
BUG: sleeping function called from invalid context at include/linux/sched/mm.h:265
Call Trace:
kmem_cache_alloc_node
__alloc_skb
nfc_genl_fw_download_done
call_timer_fn
__run_timers.part.0
run_timer_softirq
__do_softirq
...
The nlmsg_new with GFP_KERNEL parameter may sleep during memory
allocation process, and the timer handler is run as the result of
a "software interrupt" that should not call any other function
that could sleep.
This patch changes allocation mode of netlink message from GFP_KERNEL
to GFP_ATOMIC in order to prevent sleep in atomic bug. The GFP_ATOMIC
flag makes memory allocation operation could be used in atomic context.
Fixes: 9674da8759df ("NFC: Add firmware upload netlink command")
Fixes: 9ea7187c53f6 ("NFC: netlink: Rename CMD_FW_UPLOAD to CMD_FW_DOWNLOAD")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220504055847.38026-1-duoming@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d270453a0d9ec10bb8a802a142fb1b3601a83098 upstream.
There are destructive operations such as nfcmrvl_fw_dnld_abort and
gpio_free in nfcmrvl_nci_unregister_dev. The resources such as firmware,
gpio and so on could be destructed while the upper layer functions such as
nfcmrvl_fw_dnld_start and nfcmrvl_nci_recv_frame is executing, which leads
to double-free, use-after-free and null-ptr-deref bugs.
There are three situations that could lead to double-free bugs.
The first situation is shown below:
(Thread 1) | (Thread 2)
nfcmrvl_fw_dnld_start |
... | nfcmrvl_nci_unregister_dev
release_firmware() | nfcmrvl_fw_dnld_abort
kfree(fw) //(1) | fw_dnld_over
| release_firmware
... | kfree(fw) //(2)
| ...
The second situation is shown below:
(Thread 1) | (Thread 2)
nfcmrvl_fw_dnld_start |
... |
mod_timer |
(wait a time) |
fw_dnld_timeout | nfcmrvl_nci_unregister_dev
fw_dnld_over | nfcmrvl_fw_dnld_abort
release_firmware | fw_dnld_over
kfree(fw) //(1) | release_firmware
... | kfree(fw) //(2)
The third situation is shown below:
(Thread 1) | (Thread 2)
nfcmrvl_nci_recv_frame |
if(..->fw_download_in_progress)|
nfcmrvl_fw_dnld_recv_frame |
queue_work |
|
fw_dnld_rx_work | nfcmrvl_nci_unregister_dev
fw_dnld_over | nfcmrvl_fw_dnld_abort
release_firmware | fw_dnld_over
kfree(fw) //(1) | release_firmware
| kfree(fw) //(2)
The firmware struct is deallocated in position (1) and deallocated
in position (2) again.
The crash trace triggered by POC is like below:
BUG: KASAN: double-free or invalid-free in fw_dnld_over
Call Trace:
kfree
fw_dnld_over
nfcmrvl_nci_unregister_dev
nci_uart_tty_close
tty_ldisc_kill
tty_ldisc_hangup
__tty_hangup.part.0
tty_release
...
What's more, there are also use-after-free and null-ptr-deref bugs
in nfcmrvl_fw_dnld_start. If we deallocate firmware struct, gpio or
set null to the members of priv->fw_dnld in nfcmrvl_nci_unregister_dev,
then, we dereference firmware, gpio or the members of priv->fw_dnld in
nfcmrvl_fw_dnld_start, the UAF or NPD bugs will happen.
This patch reorders destructive operations after nci_unregister_device
in order to synchronize between cleanup routine and firmware download
routine.
The nci_unregister_device is well synchronized. If the device is
detaching, the firmware download routine will goto error. If firmware
download routine is executing, nci_unregister_device will wait until
firmware download routine is finished.
Fixes: 3194c6870158 ("NFC: nfcmrvl: add firmware download support")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da5c0f119203ad9728920456a0f52a6d850c01cd upstream.
The device_is_registered() in nfc core is used to check whether
nfc device is registered in netlink related functions such as
nfc_fw_download(), nfc_dev_up() and so on. Although device_is_registered()
is protected by device_lock, there is still a race condition between
device_del() and device_is_registered(). The root cause is that
kobject_del() in device_del() is not protected by device_lock.
(cleanup task) | (netlink task)
|
nfc_unregister_device | nfc_fw_download
device_del | device_lock
... | if (!device_is_registered)//(1)
kobject_del//(2) | ...
... | device_unlock
The device_is_registered() returns the value of state_in_sysfs and
the state_in_sysfs is set to zero in kobject_del(). If we pass check in
position (1), then set zero in position (2). As a result, the check
in position (1) is useless.
This patch uses bool variable instead of device_is_registered() to judge
whether the nfc device is registered, which is well synchronized.
Fixes: 3e256b8f8dfa ("NFC: add nfc subsystem core")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 101da4268626b00d16356a6bf284d66e44c46ff9 upstream.
Use the device of the device tree node should be rather than the
device of the struct net_device when allocating DMA buffers.
The driver got away with it on sparc32 until commit 53b7670e5735
("sparc: factor the dma coherent mapping into helper") after which the
driver oopses.
Fixes: 6cec9b07fe6a ("can: grcan: Add device driver for GRCAN and GRHCAN cores")
Link: https://lore.kernel.org/all/20220429084656.29788-2-andreas@gaisler.com
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Signed-off-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47f070a63e735bcc8d481de31be1b5a1aa62b31c upstream.
There are deadlocks caused by del_timer_sync(&priv->hang_timer) and
del_timer_sync(&priv->rr_timer) in grcan_close(), one of the deadlocks
are shown below:
(Thread 1) | (Thread 2)
| grcan_reset_timer()
grcan_close() | mod_timer()
spin_lock_irqsave() //(1) | (wait a time)
... | grcan_initiate_running_reset()
del_timer_sync() | spin_lock_irqsave() //(2)
(wait timer to stop) | ...
We hold priv->lock in position (1) of thread 1 and use
del_timer_sync() to wait timer to stop, but timer handler also need
priv->lock in position (2) of thread 2. As a result, grcan_close()
will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain the
needed lock.
Link: https://lore.kernel.org/all/20220425042400.66517-1-duoming@zju.edu.cn
Fixes: 6cec9b07fe6a ("can: grcan: Add device driver for GRCAN and GRHCAN cores")
Cc: stable@vger.kernel.org
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Andreas Larsson <andreas@gaisler.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4f5c6b2e52b27462c0599e64e96e53b58438de1 upstream.
The WM8958 DSP controls all return 0 on successful write, not a boolean
value indicating if the write changed the value of the control. Fix this
by returning 1 after a change, there is already a check at the start of
each put() that skips the function in the case that there is no change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220416125408.197440-1-broonie@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a7ecbe92b9243edbe94772f6f2c854e4142a3345 upstream.
card->local_node and card->bm_retries are both always accessed under
card->lock.
fw_core_handle_bus_reset has a check whose condition depends on
card->local_node and whose body writes to card->bm_retries.
Both of these accesses are not under card->lock. Move the lock acquiring
of card->lock to before this check such that these accesses do happen
when card->lock is held.
fw_destroy_nodes is called inside the check.
Since fw_destroy_nodes already acquires card->lock inside its function
body, move this out to the callsites of fw_destroy_nodes.
Also add a comment to indicate which locking is necessary when calling
fw_destroy_nodes.
Cc: <stable@vger.kernel.org>
Signed-off-by: Niels Dossche <dossche.niels@gmail.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20220409041243.603210-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9423973869bd4632ffe669f950510c49296656e0 upstream.
When list_for_each_entry() completes the iteration over the whole list
without breaking the loop, the iterator value will be a bogus pointer
computed based on the head element.
While it is safe to use the pointer to determine if it was computed
based on the head element, either with list_entry_is_head() or
&pos->member == head, using the iterator variable after the loop should
be avoided.
In preparation to limit the scope of a list iterator to the list
traversal loop, use a dedicated pointer to point to the found element [1].
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/ [1]
Cc: <stable@vger.kernel.org>
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20220409041243.603210-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b7c81f80246fac44077166f3e07103affe6db8ff upstream.
&e->event and e point to the same address, and &e->event could
be freed in queue_event. So there is a potential uaf issue if
we dereference e after calling queue_event(). Fix this by adding
a temporary variable to maintain e->client in advance, this can
avoid the potential uaf issue.
Cc: <stable@vger.kernel.org>
Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20220409041243.603210-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a3d0562d4dc039bca39445e1cddde7951662e17d upstream.
This reverts commit 7073ea8799a8cf73db60270986f14e4aae20fa80.
We must not try to connect the socket while the transport is under
construction, because the mechanisms to safely tear it down are not in
place. As the code stands, we end up leaking the sockets on a connection
error.
Reported-by: wanghai (M) <wanghai38@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb9d84b0ffe39893cb23b0b6712bbe3637fa25fa upstream.
ALSA fireworks driver has a bug in its initial state to return count
shorter than expected by 4 bytes to userspace applications when handling
response frame for Echo Audio Fireworks transaction. It's due to missing
addition of the size for the type of event in ALSA firewire stack.
Fixes: 555e8a8f7f14 ("ALSA: fireworks: Add command/response functionality into hwdep interface")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20220424102428.21109-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b89966bc96a06f6ad65f64ae4b0461918fcc9d3 upstream.
The Linux tool "lscpu" shows the double amount of CPUs if we have
"model" and "model name" in two different lines in /proc/cpuinfo.
This change combines the model and the model name into one line.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f0a6c68f69981214cb7858738dd2bc81475111f7 upstream.
Fix the discrepancy between the two places we check for the CP0 counter
erratum in along with the incorrect comparison of the R4400 revision
number against 0x30 which matches none and consistently consider all
R4000 and R4400 processors affected, as documented in processor errata
publications[1][2][3], following the mapping between CP0 PRId register
values and processor models:
PRId | Processor Model
---------+--------------------
00000422 | R4000 Revision 2.2
00000430 | R4000 Revision 3.0
00000440 | R4400 Revision 1.0
00000450 | R4400 Revision 2.0
00000460 | R4400 Revision 3.0
No other revision of either processor has ever been spotted.
Contrary to what has been stated in commit ce202cbb9e0b ("[MIPS] Assume
R4000/R4400 newer than 3.0 don't have the mfc0 count bug") marking the
CP0 counter as buggy does not preclude it from being used as either a
clock event or a clock source device. It just cannot be used as both at
a time, because in that case clock event interrupts will be occasionally
lost, and the use as a clock event device takes precedence.
Compare against 0x4ff in `can_use_mips_counter' so that a single machine
instruction is produced.
References:
[1] "MIPS R4000PC/SC Errata, Processor Revision 2.2 and 3.0", MIPS
Technologies Inc., May 10, 1994, Erratum 53, p.13
[2] "MIPS R4400PC/SC Errata, Processor Revision 1.0", MIPS Technologies
Inc., February 9, 1994, Erratum 21, p.4
[3] "MIPS R4400PC/SC Errata, Processor Revision 2.0 & 3.0", MIPS
Technologies Inc., January 24, 1995, Erratum 14, p.3
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Fixes: ce202cbb9e0b ("[MIPS] Assume R4000/R4400 newer than 3.0 don't have the mfc0 count bug")
Cc: stable@vger.kernel.org # v2.6.24+
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b848f20eda5974020f043ca14bacf7a7e634fc8 upstream.
There's two references floating around here (for the object reference,
not the handle_count reference, that's a different thing):
- The temporary reference held by vgem_gem_create, acquired by
creating the object and released by calling
drm_gem_object_put_unlocked.
- The reference held by the object handle, created by
drm_gem_handle_create. This one generally outlives the function,
except if a 2nd thread races with a GEM_CLOSE ioctl call.
So usually everything is correct, except in that race case, where the
access to gem_object->size could be looking at freed data already.
Which again isn't a real problem (userspace shot its feet off already
with the race, we could return garbage), but maybe someone can exploit
this as an information leak.
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Hillf Danton <hdanton@sina.com>
Reported-by: syzbot+0dc4444774d419e916c8@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Eric Anholt <eric@anholt.net>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Rob Clark <robdclark@chromium.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200202132133.1891846-1-daniel.vetter@ffwll.ch
[OP: backport to 4.19: adjusted DRM_DEBUG() -> DRM_DEBUG_DRIVER()]
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff9166c623704337bd6fe66fce2838d9768a6634 upstream.
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.4.2 states that any received unnumbered
acknowledgment (UA) with its poll/final (PF) bit set to 0 shall be
discarded. Currently, all UA frame are handled in the same way regardless
of the PF bit. This does not comply with the standard.
Remove the UA case in gsm_queue() to process only UA frames with PF bit set
to 1 to abide the standard.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-20-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 398867f59f956985f4c324f173eff7b946e14bd8 upstream.
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.4.6.1 states that each command frame shall
be made up from type, length and value. Looking for example in chapter
5.4.6.3.5 at the description for the encoding of a flow control on command
it becomes obvious, that the type and length field is always present
whereas the value may be zero bytes long. The current implementation omits
the length field if the value is not present. This is wrong.
Correct this by always sending the length in gsm_control_transmit().
So far only the modem status command (MSC) has included a value and encoded
its length directly. Therefore, also change gsmtty_modem_update().
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-12-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d0bcdffcad5a22f202e3bf37190c0dd8c080ea92 upstream.
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.7.3 states that the valid range for the
maximum number of retransmissions (N2) is from 0 to 255 (both including).
gsm_config() fails to limit this range correctly. Furthermore,
gsm_control_retransmit() handles this number incorrectly by performing
N2 - 1 retransmission attempts. Setting N2 to zero results in more than 255
retransmission attempts.
Fix the range check in gsm_config() and the value handling in
gsm_control_send() and gsm_control_retransmit() to comply with 3GPP 27.010.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-11-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 17eac652028501df7ea296b1d9b9c134db262b7d upstream.
In gsm_cleanup_mux() the muxer is closed down and all queues are removed.
However, removing the queues is done without explicit control of the
underlying buffers. Flush those before freeing up our queues to ensure
that all outgoing queues are cleared consistently. Otherwise, a new mux
connection establishment attempt may time out while the underlying tty is
still busy sending out the remaining data from the previous connection.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-10-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 535bf600de75a859698892ee873521a48d289ec1 upstream.
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.7.2 states that the maximum frame size
(N1) refers to the length of the information field (i.e. user payload).
However, 'txframe' stores the whole frame including frame header, checksum
and start/end flags. We also need to consider the byte stuffing overhead.
Define constant for the protocol overhead and adjust the 'txframe' size
calculation accordingly to reserve enough space for a complete mux frame
including byte stuffing for advanced option mode. Note that no byte
stuffing is applied to the start and end flag.
Also use MAX_MTU instead of MAX_MRU as this buffer is used for data
transmission.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-8-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a24b4b2f660b7ddf3f484b37600bba382cb28a9d upstream.
The gsm_mux field 'malformed' represents the number of malformed frames
received. However, gsm1_receive() also increases this counter for any out
of frame byte.
Fix this by ignoring out of frame data for the malformed counter.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-7-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 06d5afd4d640eea67f5623e76cd5fc03359b7f3c upstream.
n_gsm is based on the 3GPP 07.010 and its newer version is the 3GPP 27.010.
See https://portal.3gpp.org/desktopmodules/Specifications/SpecificationDetails.aspx?specificationId=1516
The changes from 07.010 to 27.010 are non-functional. Therefore, I refer to
the newer 27.010 here. Chapter 5.5.2 describes that the signal octet in
convergence layer type 2 can be either one or two bytes. The length is
encoded in the EA bit. This is set 1 for the last byte in the sequence.
gsmtty_modem_update() handles this correctly but gsm_dlci_data_output()
fails to set EA to 1. There is no case in which we encode two signal octets
as there is no case in which we send out a break signal.
Therefore, always set the EA bit to 1 for the signal octet to fix this.
Fixes: e1eaea46bb40 ("tty: n_gsm line discipline")
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Starke <daniel.starke@siemens.com>
Link: https://lore.kernel.org/r/20220414094225.4527-5-daniel.starke@siemens.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9e14dbbd454581061c736bf70bf5cbb15ac927c upstream.
When resuming from system sleep state, restore_processor_state()
restores the boot CPU MSRs. These MSRs could be emulated by microcode.
If microcode is not loaded yet, writing to emulated MSRs leads to
unchecked MSR access error:
...
PM: Calling lapic_suspend+0x0/0x210
unchecked MSR access error: WRMSR to 0x10f (tried to write 0x0...0) at rIP: ... (native_write_msr)
Call Trace:
<TASK>
? restore_processor_state
x86_acpi_suspend_lowlevel
acpi_suspend_enter
suspend_devices_and_enter
pm_suspend.cold
state_store
kobj_attr_store
sysfs_kf_write
kernfs_fop_write_iter
new_sync_write
vfs_write
ksys_write
__x64_sys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
RIP: 0033:0x7fda13c260a7
To ensure microcode emulated MSRs are available for restoration, load
the microcode on the boot CPU before restoring these MSRs.
[ Pawan: write commit message and productize it. ]
Fixes: e2a1256b17b1 ("x86/speculation: Restore speculation related MSRs during S3 resume")
Reported-by: Kyle D. Pelton <kyle.d.pelton@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Tested-by: Kyle D. Pelton <kyle.d.pelton@intel.com>
Cc: stable@vger.kernel.org
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215841
Link: https://lore.kernel.org/r/4350dfbf785cd482d3fafa72b2b49c83102df3ce.1650386317.git.pawan.kumar.gupta@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bc6de2878429e85c1f1afaa566f7b5abb2243eef ]
There is a deadlock in rr_close(), which is shown below:
(Thread 1) | (Thread 2)
| rr_open()
rr_close() | add_timer()
spin_lock_irqsave() //(1) | (wait a time)
... | rr_timer()
del_timer_sync() | spin_lock_irqsave() //(2)
(wait timer to stop) | ...
We hold rrpriv->lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need rrpriv->lock in position (2) of thread 2.
As a result, rr_close() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain
the needed lock.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417125519.82618-1-duoming@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5d0f921ea362636e4a2efb7c38d1ead373a8700 ]
because the copychunk_write might cover a region of the file that has not yet
been sent to the server and thus fail.
A simple way to reproduce this is:
truncate -s 0 /mnt/testfile; strace -f -o x -ttT xfs_io -i -f -c 'pwrite 0k 128k' -c 'fcollapse 16k 24k' /mnt/testfile
the issue is that the 'pwrite 0k 128k' becomes rearranged on the wire with
the 'fcollapse 16k 24k' due to write-back caching.
fcollapse is implemented in cifs.ko as a SMB2 IOCTL(COPYCHUNK_WRITE) call
and it will fail serverside since the file is still 0b in size serverside
until the writes have been destaged.
To avoid this we must ensure that we destage any unwritten data to the
server before calling COPYCHUNK_WRITE.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1997373
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a6823e4e360fe975bd3da4ab156df7c74c8b07f3 ]
The first "if" condition in __memcpy_flushcache is supposed to align the
"dest" variable to 8 bytes and copy data up to this alignment. However,
this condition may misbehave if "size" is greater than 4GiB.
The statement min_t(unsigned, size, ALIGN(dest, 8) - dest); casts both
arguments to unsigned int and selects the smaller one. However, the
cast truncates high bits in "size" and it results in misbehavior.
For example:
suppose that size == 0x100000001, dest == 0x200000002
min_t(unsigned, size, ALIGN(dest, 8) - dest) == min_t(0x1, 0xe) == 0x1;
...
dest += 0x1;
so we copy just one byte "and" dest remains unaligned.
This patch fixes the bug by replacing unsigned with size_t.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92ccbf17eeacf510cf1eed9c252d9332ca24f02d ]
When the driver fails during probing, the driver should disable the
regulator, not just handle it in wm8731_hw_init().
The following log reveals it:
[ 17.812483] WARNING: CPU: 1 PID: 364 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
[ 17.815958] RIP: 0010:_regulator_put+0x3ec/0x4e0
[ 17.824467] Call Trace:
[ 17.824774] <TASK>
[ 17.825040] regulator_bulk_free+0x82/0xe0
[ 17.825514] devres_release_group+0x319/0x3d0
[ 17.825882] i2c_device_probe+0x766/0x940
[ 17.829198] i2c_register_driver+0xb5/0x130
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220405121038.4094051-1-zheyuma97@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
