Geert Uytterhoeven 3beb61dbfc spi: rspi: Round up division to avoid slave overclocking
The calculation of the bit rate divider used a standard C division, which
rounds down the quotient. This may lead to a higher bitrate than requested.
Round up to avoid this.

E.g. on Koelsch, the SPI flash (configured for 30 MHz) was driven at 48.75
MHz. After this patch it's driven at a safe 24.375 MHz.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-26 14:30:37 +01:00
..
2014-04-08 21:34:51 +02:00
2014-04-05 15:37:40 -07:00
2014-04-11 13:25:08 -07:00
2014-04-05 15:37:40 -07:00
2014-04-07 10:24:18 -07:00
2014-04-08 13:28:02 +02:00
2014-04-08 13:27:40 +02:00
2014-04-07 10:24:18 -07:00
2014-04-01 16:13:21 -07:00
2014-04-08 13:27:40 +02:00
2014-04-07 10:24:18 -07:00
2014-04-05 18:32:31 -07:00
2014-04-05 18:46:26 -07:00
2014-04-05 15:37:40 -07:00
2014-04-08 12:41:13 -04:00
2014-04-09 08:39:39 -07:00
2014-04-09 08:39:39 -07:00
2014-04-07 10:17:30 -07:00
2014-04-07 10:17:30 -07:00
2014-04-05 15:37:40 -07:00
2014-04-05 18:32:31 -07:00
2014-04-11 13:30:05 -07:00
2014-04-05 15:37:40 -07:00
2014-04-05 15:38:41 -07:00
2014-04-03 14:05:02 -07:00
2014-04-07 17:50:18 -07:00