msm-4.14/drivers/nfc/Kconfig
Sumatheendra Raghavendrachar e9c434c264 NFC: Add driver support for NTAG
Driver implementation to interact with NTAG chipsets,
NTAG is NFC tags that combine passive NFC interface with contact
i2c interface.

Change-Id: I4f871285ece6c864f57274c86059096953e5535e
Signed-off-by: Sumatheendra Raghavendrachar <sumath@codeaurora.org>
2018-06-27 11:32:06 +05:30

78 lines
2.3 KiB
Plaintext

#
# Near Field Communication (NFC) devices
#
menu "Near Field Communication (NFC) devices"
depends on NFC
config NFC_TRF7970A
tristate "Texas Instruments TRF7970a NFC driver"
depends on SPI && NFC_DIGITAL && GPIOLIB
help
This option enables the NFC driver for Texas Instruments' TRF7970a
device. Such device supports 5 different protocols: ISO14443A,
ISO14443B, FeLiCa, ISO15693 and ISO18000-3.
Say Y here to compile support for TRF7970a into the kernel or
say M to compile it as a module. The module will be called
trf7970a.ko.
config NFC_MEI_PHY
tristate "MEI bus NFC device support"
depends on INTEL_MEI && NFC_HCI
help
This adds support to use an mei bus nfc device. Select this if you
will use an HCI NFC driver for an NFC chip connected behind an
Intel's Management Engine chip.
If unsure, say N.
config NFC_SIM
tristate "NFC hardware simulator driver"
depends on NFC_DIGITAL
help
This driver declares two virtual NFC devices supporting NFC-DEP
protocol. An LLCP connection can be established between them and
all packets sent from one device is sent back to the other, acting as
loopback devices.
If unsure, say N.
config NFC_PORT100
tristate "Sony NFC Port-100 Series USB device support"
depends on USB
depends on NFC_DIGITAL
help
This adds support for Sony Port-100 chip based USB devices such as the
RC-S380 dongle.
If unsure, say N.
source "drivers/nfc/fdp/Kconfig"
source "drivers/nfc/pn544/Kconfig"
source "drivers/nfc/pn533/Kconfig"
source "drivers/nfc/microread/Kconfig"
source "drivers/nfc/nfcmrvl/Kconfig"
source "drivers/nfc/st21nfca/Kconfig"
source "drivers/nfc/st-nci/Kconfig"
source "drivers/nfc/nxp-nci/Kconfig"
source "drivers/nfc/s3fwrn5/Kconfig"
source "drivers/nfc/st95hf/Kconfig"
endmenu
config NFC_NQ
tristate "QTI NCI based NFC Controller Driver for NQx"
depends on I2C
help
This enables the NFC driver for NQx based devices.
This is for i2c connected version. NCI protocol logic
resides in the usermode and it has no other NFC dependencies.
config NTAG_NQ
tristate "QTI NTAG Driver for NTAG communication"
depends on I2C
help
This enables NTAG driver for NTx based devices.
NTAG is NFC tags that combine passive NFC interface with contact i2c interface.
This is for i2c connected version.