Matthew Garrett 9bcb811896 ACPI: Evaluate thermal trip points before reading temperature
An HP laptop (Pavilion G4-1016tx) has the following code in _TMP:

       Store (\_SB.PCI0.LPCB.EC0.RTMP, Local0)
       If (LGreaterEqual (Local0, S4TP))
       {
           Store (One, HTS4)
       }

S4TP is initialised at 0 and not programmed further until either _HOT or
_CRT is called. If we evaluate _TMP before the trip points then HTS4 will
always be set, causing the firmware to generate a message on boot
complaining that the system shut down because of overheating. The simplest
solution is just to reverse the checking of trip points and _TMP in thermal
init.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2012-03-30 02:38:31 -04:00
..
2012-02-06 14:37:52 -05:00
2012-01-26 18:36:48 +00:00
2012-02-02 14:00:43 +05:30
2012-02-09 15:41:29 -05:00
2012-03-08 17:21:51 -08:00
2012-02-27 10:09:52 -06:00
2012-02-01 19:35:21 +01:00
2012-02-13 11:57:58 -07:00
2012-02-01 15:26:00 -05:00