Kostya Belezko c484994eb3 Altera TSE: Add missing phydev
Altera network device doesn't come up after

ifconfig eth0 down
ifconfig eth0 up

The reason behind is clearing priv->phydev during tse_shutdown().
The phydev is not restored back at tse_open().

Resubmiting as to follow Tobias Klauser suggestion.
phy_start/phy_stop are called on each ifup/ifdown and
phy_disconnect is called once during the module removal.

Signed-off-by: Kostya Belezko <bkostya@hotmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-02 15:45:10 -05:00
..
2014-12-29 21:24:13 +01:00
2014-12-14 16:10:09 -08:00
2014-12-14 16:10:09 -08:00
2014-12-14 16:10:09 -08:00
2014-12-14 16:10:09 -08:00
2014-12-14 16:10:09 -08:00
2014-12-14 16:10:09 -08:00
2014-12-14 16:10:09 -08:00
2014-12-14 16:43:47 -08:00
2014-12-14 16:10:09 -08:00
2014-12-15 18:06:13 -08:00
2014-12-20 13:42:57 -08:00
2014-12-14 16:10:09 -08:00
2014-12-17 09:59:26 -08:00
2014-12-14 16:10:09 -08:00
2014-12-19 12:57:45 -08:00
2014-12-17 09:59:26 -08:00
2015-01-02 15:45:10 -05:00
2014-12-16 14:53:01 -08:00
2014-12-14 16:10:09 -08:00
2014-12-18 20:24:55 -08:00
2014-12-17 10:10:51 -08:00
2014-12-29 13:24:38 -08:00
2014-12-14 16:10:09 -08:00
2014-12-14 16:10:09 -08:00
2014-12-14 16:10:09 -08:00
2014-12-20 13:42:57 -08:00
2014-12-20 13:42:57 -08:00
2014-12-14 16:43:47 -08:00
2014-12-20 13:42:57 -08:00
2014-12-17 10:44:22 -08:00
2014-12-14 16:43:47 -08:00
2014-12-15 18:06:13 -08:00
2014-12-15 18:06:13 -08:00