Karl Beldan
ef89a88013
[MTD] [NAND] nand_base.c: reset chip first
...
Some chips require a RESET after power-up (e.g. Micron MT29FxGxxxxx).
The first command sent is NAND_CMD_READID.
Issue a NAND_CMD_RESET in nand_scan_ident before reading the device id.
Tested with an MT29F4G08AAC.
Signed-off-by: Karl Beldan <karl.beldan@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-09-16 08:18:12 -07:00
..
2007-10-13 14:33:27 +01:00
2008-08-07 09:55:48 +01:00
2008-06-07 08:43:00 +01:00
2008-08-07 09:55:48 +01:00
2008-08-25 12:20:53 +01:00
2008-08-07 09:55:48 +01:00
2008-08-01 15:44:22 +01:00
2008-06-04 17:27:20 +01:00
2008-08-07 09:55:48 +01:00
2008-04-22 12:35:40 +01:00
2008-08-01 15:34:16 +01:00
2008-08-07 09:55:48 +01:00
2008-06-04 17:28:03 +01:00
2008-07-30 12:02:34 +01:00
2008-04-22 20:46:30 +01:00
2008-08-07 09:55:48 +01:00
2008-09-02 22:35:36 +01:00
2008-09-02 22:35:36 +01:00
2008-09-02 22:35:36 +01:00
2008-09-16 08:18:12 -07:00
2008-06-04 17:50:17 +01:00
2008-08-25 12:23:36 +01:00
2008-06-04 17:50:17 +01:00
2008-08-11 17:31:32 +01:00
2008-04-22 14:17:47 +01:00
2008-08-09 13:44:58 +02:00
2007-11-29 00:47:13 +00:00
2008-04-22 21:11:54 +01:00
2008-06-04 17:50:17 +01:00
2008-09-01 21:38:44 +01:00
2008-06-04 17:50:17 +01:00
2008-07-25 10:10:21 -04:00
2008-08-07 09:55:48 +01:00
2008-06-04 17:50:17 +01:00
2008-08-10 23:30:09 +02:00
2008-08-07 09:55:48 +01:00