malhuda/AdguardKnowledgeBase

Fork 0

mirror of https://github.com/AdguardTeam/AdguardKnowledgeBase.git synced 2025-02-20 11:13:10 +08:00

Vasily Bagirov 9543edc919 !#include directive update

2021-07-08 17:36:58 +03:00

109 KiB

Raw Permalink Blame History

title

taxonomy

visible

How to create your own ad filters

Introduction

A filter is a set of filtering rules applied to specific content (banners, popups, etc). AdGuard has a list of standard filters created by our team. Our team constantly improves and updates them, and we hope our filters meet the needs of most of our users.

At the same time, AdGuard allows you to create your own custom filters, using the same type of rules that we have in our filters.

To describe the syntax of our filtering rules we use Augmented BNF for Syntax Specifications, but we do not always strictly follow this specification.

AdGuard syntax is originally based on syntax of Adblock Plus rules, but it was extended with new types of rules for better ad filtering. Some parts of this article's content about the rules common to both AdGuard and ABP was taken from this article.

Comments

Any line that starts with an exclamation mark is a comment. In the list of rules it is displayed in gray color. AdGuard will ignore this line, so you can write anything you want. Comments are usually placed above the rules and used to describe what a rule does.

For example:

! This is the comment. Under this line there is an actual filtering rule.
||example.org^

Examples

Example: Blocking by domain name

This rule blocks:

http://example.org/ad1.gif
http://subdomain.example.org/ad1.gif
https://ads.example.org:8000/

This rule does not block:

http://ads.example.org.us/ad1.gif
http://example.com/redirect/http://ads.example.org/

Example: Blocking exact address

This rule blocks:

http://example.org/

This rule does not block:

https://example.org/banner/img

Example: Basic rule modifiers

Filtering rules support numerous modifiers that allow you to fine-tune the rule behavior. Here is an example of a rule with some simple modifiers.

This rule blocks:

http://example.org/script.js if this script is loaded from example.com.

This rule does not block:

https://example.org/script.js if this script is loaded from example.org.
https://example.org/banner.png because it is not a script.

Example: Unblocking an address

This rule unblocks:

http://example.org/banner.png even if there is a blocking rule for this address.

Blocking rules with $important modifier can override exceptions.

Unblocking everything on a website

This rule unblocks

It disables all cosmetic rules on example.com.
It unblocks all requests sent from this website even if there is are blocking rules matching these requests.

Example: Cosmetic rule

Cosmetic rules are based on using a special language named CSS, which every browser understands. Basically, it adds a new CSS style to the website which purpose is to hide particular elements. You can learn more about CSS in general here.

AdGuard extends CSS and lets filters developers handle much more complicated cases. However, to use these extended rules, you need to be fluent in regular CSS.

Popular CSS selectors

Name	CSS selector	Description
ID selector	`#banners`	Matches all elements with `id` attribute equal to `banners`.
Class selector	`.banners`	Matches all elements with `class` attribute containing `banners`.
Attribute selector	`div[class="banners"]`	Matches all `div` elements with `class` attribute exactly equal to `banners`.
Attribute substring selector	`div[class^="advert1"]`	Matches all `div` elements which `class` attribute starts with the `advert1` string.
Attribute substring selector	`div[class$="banners_ads"]`	Matches all `div` elements which `class` attribute ends with the `banners_ads` string.
Attribute substring selector	`a[href^="http://example.com/"]`	Matches all links that are loaded from `http://example.com/` domain.
Attribute selector	`a[href="http://example.com/"]`	Matches all links to exactly the `http://example.com/` address.

Basic rules

The most simple rules are so-called "Basic rules". They are used to block requests to specific URLs. Or to unblock it, if there is a special marker "@@" at the beginning of the rule. The basic principle for this type of rules is quite simple: you have to specify the address and additional parameters that limit or expand the scope of the rule.

Sub-requests

Basic rules for blocking requests are applied only to sub-requests. That means they will not block the loading of the page.

Response status

Browser detects a blocked request as completed with an error.

Basic rules syntax

      rule = ["@@"] pattern [ "$" modifiers ]
modifiers = [modifier0, modifier1[, ...[, modifierN]]]

pattern — address mask. Every request's URL is collated to this mask. You can also use special characters in the template, their description is below.
@@ — A marker that is used in rules of exception. To turn off filtering for a request, start your rule with this marker.
modifiers — Parameters that "clarify" the basic rule. Some of them limit the scope of the rule and some can completely change they way it works.

Special characters

* — Wildcard character. It is used to represent "any set of characters". This can also be an empty string or a string of any length.
|| — Matching the beginning of an address. With this character you don't have to specify a particular protocol and subdomain in address mask. It means, || stands for http://*., https://*., ws://*., wss://*. at once.
^ — Separator character mark. Separator character is any character, but a letter, a digit, or one of the following: _ - . %. In this example separator characters are shown in bold: http://example.com/?t=1&t2=t3. The end of the address is also accepted as separator.
| — A pointer to the beginning or the end of address. The value depends on the character placement in the mask. For example, a rule swf| corresponds to http://example.com/annoyingflash.swf , but not to http://example.com/swf/index.html. |http://example.org corresponds to http://example.org, but not to http://domain.com?url=http://example.org.

Visual representation. We also recommend to get acquainted with this article, for better understanding of how such rules should be made.

Regular expressions support

If you want even more flexibility in making rules, you can use Regular expressions instead of a default simplified mask with special characters.

Performance. Rules with regular expressions work more slowly, therefore it is recommended to avoid them or to limit their scope to specific domains.

If you want a blocker to determine a regular expression, the pattern has to look like this:

pattern = "/" regexp "/"

For example, /banner\d+/$third-party this rule will apply the regular expression banner\d+ to all third-party requests. Exclusion rule with regular expression looks like this: @@/banner\d+/.

Compatibility with different versions of AdGuard. AdGuard browser extension for Safari and AdGuard for iOS do not fully support regular expressions because of Content Blocking API restrictions (look for "The Regular expression format" section).

Wildcard support for TLD (top-level domains)

Wildcard characters are supported for TLDs of the domains in patterns of cosmetic, html and javascript rules. For example, the cosmetic rule example.*##.banner will match any example.TLD request (example.ru, example.com, example.net, example.org, etc.). For the basic rules the described logic will be applicable only for the domains specified in $domain modifier (for example, ||*/banners/*$image,domain=example.*).

Compatibility with different versions of AdGuard. Supported by: AdGuard for Windows/macOS/Android/Safari/iOS and browser extensions for Chrome/Firefox/Edge.

Basic rules examples

||example.com/ads/* — a simple rule, which corresponds to addresses like http://example.com/ads/banner.jpg and even http://subdomain.example.com/ads/otherbanner.jpg.
||example.org^$third-party — a rule that blocks third-party requests to example.org and it's subdomains.
@@||example.com$document — general exception rule. It completely disables filtering for example.com and all subdomains. There is a number of modifiers which can be used in exception rules. For more details, please follow the link below.

Modifiers

Attention! The features described in this section are intended for experienced users. They extend capabilities of "Basic rules", but in order to use them you need to have a basic undestanding of the way your browser works.

You can change the behavior of a "basic rule" by using additional modifiers. Modifiers should be located in the end of the rule after a $ sign and be separated by commas.

Example:

||domain.com^$popup,third-party

Basic modifiers

The following modifiers are the most simple and frequently used.

`domain`

domain limits the rule application area to a list of domains (and their subdomains). To add multiple domains to one rule, use the | character as a separator.

`domain` examples

||baddomain.com^$domain=example.org — a rule to block requests that match the specified mask, and are sent from domain example.org or its subdomains.
||baddomain.com^$domain=example.org|example.com — the same rule, but it works for both example.org and example.com.

If you want the rule not to be applied to certain domains, start a domain name with ~ sign.

`domain` and `~` examples

||baddomain.com^$domain=~example.org — a rule to block requests that match the specified mask, and are sent from any domain except example.org or it's subdomains.
||baddomain.com^$domain=example.org|~foo.example.org — this rule blocks requests that are sent from example.org and all it's subdomains, except the subdomain foo.example.org.

`domain` modifier matching target domain

In some cases the $domain modifier can match not only the referrer domain, but also the target domain. This happens when all of the following is true:

The request has document type
The rule's pattern doesn't match any particular domain(s)
The rule's pattern doesn't contain regular expressions

When all these conditions are met, the domain modifier will match both the referrer doman and the target domain.

If some of the conditions above aren't met but the rule contains modifiers cookie or csp, the target domain will still be matched.

If the referrer matches a rule with domain that explicitly excludes the referrer domain, then the rule won't be applied even if the target domain also matches the rule. This affects rules with cookie and csp modifiers, too.

Examples:

*$cookie,domain=example.org|example.com will block cookies for all requests to and from example.org and example.com.
*$document,domain=example.org|example.com will block all requests to and from example.org and example.com.

In the following examples it's implied that requests are sent from http://example.org/page(the referrer) and the target URL is http://targetdomain.com/page.

page$domain=example.org will be matched, as it matches the referrer domain.
page$domain=targetdomain.com will be matched, as it matches the target domain but satisfies all requirements mentioned above.
||*page$domain=targetdomain.com will not be matched, as the pattern ||*page matches specific domains.
||*page$domain=targetdomain.com,cookie will be matched despite the pattern ||*page matches specific domains because it contains $cookie modifier.
/banner\d+/$domain=targetdomain.com will not be matched as it contains a regular expression.
page$domain=targetdomain.com|~example.org will not be matched because the referrer domain is explicitly excluded.

Important! Safari doesn't support the simultaneous use of allowed and disallowed domains, so rules like ||baddomain.com^$domain=example.org|~foo.example.org will not work in AdGuard for Safari.

`third-party`

A restriction of third-party and own requests. A third-party request is a request from different domain. For example, a request to example.org, from domain.com is a third-party request.

Subdomains. Please note that request from domain to it's subdomain (or vice versa) is not considered a third-party request. For example, a request to subdomain.example.org, sent from the domain example.org is not a third-party request.

If there is a third-party modifier, the rule is only applied to third-party request.

`third-party` examples

||domain.com^$third-party — rule is applied to all domains, except domain.com and it's subdomains. Third-party request example: http://example.org/banner.jpg.

If there is a ~third-party modifier, the rule is only applied to the requests that are not from third-party. Which means, they have to be sent from the same domain.

`~third-party` examples

||domain.com$~third-party — this rule is applied to domain.com, but not to the other domains. Example of a request that is not a third-party request: http://domain.com/icon.ico.

AdGuard will try to close the browser tab with any address that matches a blocking rule with this modifier. Please note that not all the tabs can be closed.

`popup`examples

||domain.com^$popup — if you try to go to http://domain.com/ from any page in the browser, a new tab in which specified site has to be opened will be closed by this rule.

It may not work if the popped up page is cached by the browser. It also will not work with some tricky popup methods. In such cases, it is better to use AdGuard Popup Blocker extension.

Important! Unlike with browser extensions, $popup modifier is very unreliable when used with AdGuard apps for Windows, Mac and Android. In AdGuard for Safari and iOS, $popup rules will simply block the page right away.

`match-case`

This modifier defines a rule which applies only to addresses that match the case. Default rules are case-insensitive.

`match-case` examples

*/BannerAd.gif$match-case — this rule will block http://example.com/BannerAd.gif, but not http://example.com/bannerad.gif.

Restriction by content type

There is a set of modifiers, which can be used to limit the rule's application area to certain type of content. These modifiers can also be combined to cover, for example, both images and scripts.

Compatibility with different versions of AdGuard. Please note that there is a big difference in how AdGuard determines the content type on different platforms. For browser extensions, content type for every request is provided by browser. AdGuard for Windows, Mac and Android use following method: first we try to determine the type of the request by the Sec-Fetch-Dest request header or by the filename extension. If the request is not blocked at this stage, the type will be determined using the Content-Type header at the beginning of the server response.

Content type modifiers examples

||example.org^$image — corresponds to all images from example.org.
||example.org^$script,stylesheet — corresponds to all the scripts and styles from example.org.
||example.org^$~image,~script,~stylesheet — corresponds to all requests to example.org except for the images, scripts and styles.

`image`

The rule corresponds to images requests.

`stylesheet`

The rule corresponds to CSS files requests.

`script`

The rule corresponds to script requests (e.g. javascript, vbscript).

`object`

The rule corresponds to browser plugins resourses. (e.g. Java or Flash).

`object-subrequest`

The rule corresponds to requests by browser plugins (it's usually Flash).

Compatibility with different versions of AdGuard. AdGuard for Windows, macOS and Android often can't accurately detect this type and defines it as other.

`font`

The rule corresponds to requests for fonts (e.g. .woff filename extension).

`media`

The rule corresponds to requests for media files (music and video, e.g. .mp4 files).

`subdocument`

The rule corresponds to requests for built-in pages (HTML tags frame and iframe).

`ping`

The rule corresponds to requests caused by either navigator.sendBeacon() or the ping attribute on links.

Compatibility with different versions of AdGuard. AdGuard for Windows, macOS and Android often can't accurately detect navigator.sendBeacon(). For reliable detection, use AdGuard browser extensions.

`xmlhttprequest`

The rule applies only to ajax requests (requests sent via javascript object XMLHttpRequest).

Compatibility with different versions of AdGuard. AdGuard for Windows, macOS and Android often can't accurately detect this type and sometimes detects it as other or script.

`websocket`

The rule applies only to WebSocket connections.

Compatibility with different versions of AdGuard. AdGuard for Safari and iOS cannot properly apply this modifier due to Safari limitations.

`webrtc`

The rule applies only to WebRTC connections.

Please note that blocking WebRTC can interfere with the work of some browser applications, such as messengers, chats, cinemas, or games.

`webrtc` example

||example.com^$webrtc,domain=example.org - this rule blocks webRTC connectios to example.com for example.org.
@@*$webrtc,domain=example.org - this rule disables the RTC wrapper for example.org.

Deprecation notice. This modifier is deprecated and will be removed in the future. If you need to suppress WebRTC, consider using the $nowebrtc scriptlet.

`other`

The rule applies to requests for which the type has not been determined or doesn't match the types listed above.

Exception modifiers

Exception rules disable the other basic rules for the addresses to which they correspond. They begin with a @@ mark. All the basic modifiers listed above can be applied to them and they also have a few special modifiers.

Visual representation. We recommend to get acquainted with this article, for better understanding of how exception rules should be made.

`elemhide`

Disables any cosmetic rules on the pages matching the rule. You will find the information about cosmetic rules further.

`elemhide` example

@@||example.com^$elemhide — disables all cosmetic rules on pages at example.com and all subdomains.

`content`

Disables HTML filtering rules and replace rules on the pages that match the rule. You will find the information about HTML filtering rules here and about replace rules here.

`content` example

@@||example.com^$content — disables all HTML filtering rules on pages at example.com and all subdomains.

`jsinject`

Forbids adding of javascript code to the page. You can read about javascript rules further.

`jsinject` example

@@||example.com^$jsinject — disables javascript on pages at example.com and all subdomains.

`urlblock`

Disables blocking of all requests sent from the pages matching the rule.

`urlblock` example

@@||example.com^$urlblock — any requests sent from the pages at example.com and all subdomains are not going to be blocked.

`extension`

Disables all userscripts on the pages matching this rule. Note, that this modifier only makes sense in AdGuard products that can work as userscript hosts (AdGuard for Windows/macOS/Android).

`extension` example

@@||example.com^$extension — userscripts won't work on all pages of the example.com website.

`document`

Completely disables blocking on corresponding pages. It is equal to simultaneous use of elemhide, content, urlblock, jsinject and extension.

`document` example

@@||example.com^$document — completely disables filtering on all pages at example.com and all subdomains.
@@||example.com^$document,~extension — completely disables blocking on any pages at example.com and all subdomains, but continues to run userscripts there.

`stealth`

Disables the Stealth Mode module for all corresponding pages and requests.

`stealth` examples

@@||example.com^$stealth — disables Stealth Mode for example.com (and subdomains) requests, except for blocking cookies and hiding tracking parameters (see below).
@@||domain.com^$script,stealth,domain=example.com — disables Stealth Mode only for script requests to domain.com (and its subdomains) on example.com and all its subdomains.
Please note that blocking cookies and removing tracking parameters is achieved by using rules with $cookie and $removeparam modifiers. Exceptions with only $stealth modifier won't do those things. If you want to completely disable all Stealth Mode features for a given URL, you need to include all three modifiers: @@||example.org^$stealth,removeparam,cookie

Compatibility with different versions of AdGuard. Stealth Mode is currently available in AdGuard for Windows, Mac, Android and AdGuard browser extensions for Chrome, Firefox, Edge. For now, the products that do not support Stealth Mode will ignore the rules with this modifier.

Generic rules

Before we can proceed to the next modifiers, we have to make a definition of generic rules. The rule is generic if it is not limited to specific domains. Wildcard character * is supported as well.

For example, these rules are generic:

###banner
*###banner
#@#.adsblock
*#@#.adsblock
~domain.com###banner
||domain.com^
||domain.com^$domain=~example.com

And these are not:

domain.com###banner
||domain.com^$domain=example.com

`generichide`

Disables all generic cosmetic rules on pages that correspond to exception rule.

@@||example.com^generichide — disables generic cosmetic rules on any pages at example.com and all subdomains.

`genericblock`

Disables generic basic rules on pages that correspond to exception rule.

@@||example.com^$genericblock — disables generic basic rules on any pages at example.com and all subdomains.

`specifichide`

Has an opposite effect to generichide. Disables all specific element hiding and CSS rules, but not general ones.

@@||example.org^$specifichide — will disable example.org##.banner but not ##.banner.

Please note that $elemhide modifier can disable all cosmetic rules at once.

Compatibility with different versions of AdGuard. Rules with this modifier are supported by AdGuard for Windows, Mac, Android, and AdGuard browser extensions for Chrome, Firefox, Edge. Developer builds only at this moment.

Advanced capabilities

These modifiers are able to completely change the behaviour of basic rules.

`removeparam`

$removeparam and $queryprune are completely interchangeable and are aliases to each other.

Rules with $removeparam modifier are intended to to strip query parameters from requests' URLs. Please note that such rules are only applied to GET, HEAD, and OPTIONS requests.

Syntax

Basic syntax

$removeparam=param -- removes query parameter with the name param from URLs of any request, e.g. a request to http://example.com/page?param=1&another=2 will be transformed to http://example.com/page?another=2.

$removeparam basic syntax is supported starting with v1.7 of CoreLibs and v3.6 of AdGuard Browser Extension.

Regular expressions

You can also use regular expressions to match query parameters and/or their values:

$removeparam=/regex/[options] -- removes query parameters matching the regex regular expression from URLs of any request. Unlike basic syntax, it means "remove query parameters normalized to a name=value string which match the regex regular expression". [options] here is the list of regular expression options. At the moment, the only supported option is i which makes matching case-insensitive.

$removeparam syntax for regular expressions will be supported starting with v1.8 of CoreLibs and v4.0 of AdGuard Browser Extension. For now, use the simplified version: $removeparam=param.

Escaping special characters: don't forget to escape special characters like ,, / and $ in the regular expressions. Use \ character for that purpose. For example, an escaped comma should look like this: \,.

Important: note that regex-type rules target both parameter's name and value. In order to minimize the chance of mistakes, it is safer to start every regex with /^ unless you specifically target parameter values.

We will try to detect and ignore unescaped $ automatically using a simple rule of thumb: It is not an options delimiter if all three are true:

It looks like $/,

There's another slash character (/) to the left of it,

There's another unescaped $ character to the left of that slash character.

Remove all query parameters

Specify naked $removeparam to remove all query parameters:

||example.org^$removeparam -- removes all query parameters from URLs matching ||example.org^.

Inversion

Use ~ to apply inversion:

$removeparam=~param -- removes all query parameters with the name different from param.
$removeparam=~/regex/ -- removes all query parameters that do not match the regex regular expression.

Negating `$removeparam`

This sort of rules work pretty much the same way it works with $csp and $redirect modifiers.

Use @@ to negate $removeparam:

@@||example.org^$removeparam -- negates all $removeparam rules for URLs that match ||example.org^.
@@||example.org^$removeparam=param -- negates the rule with $removeparam=param for any request matching ||example.org^.
@@||example.org^$removeparam=/regex/ -- negates the rule with $removeparam=/regex/ for any request matching ||example.org^.

Multiple rules matching a single request In the case when multiple $removeparam rules match a single request, each of them will be applied one by one.

Examples

$removeparam=utm_source|utm_medium|utm_term
$removeparam=utm_content|utm_campaign|utm_referrer
@@||example.com^$removeparam

With these rules some UTM parameters will be stripped out from any request, except that requests to example.com won't be stripped at all, e.g. http://google.com/page?utm_source=s&utm_referrer=fb.com&utm_content=img will be transformed to http://google.com/page, but http://example.com/page?utm_source=s&utm_referrer=fb.com&utm_content=img won't be affected by the blocking rule.

$removeparam=utm_source -- removes utm_source query parameter from all requests.
$removeparam=/utm_.*/ -- removes all utm_* query parameters from URL queries of any request, e.g. a request to http://example.com/page?utm_source=test will be transformed to http://example.com/page.
$removeparam=/^utm_source=campaign$/ -- removes utm_source query parameter with the value equal to campaign. It does not touch other utm_source parameters.

Negating one $removeparam rule and replacing it with a different rule:

$removeparam=/^(gclid|yclid|fbclid)=/
@@||example.com^$removeparam=/^(gclid|yclid|fbclid)=/
||example.com^$removeparam=/^(yclid|fbclid)=/

With these rules, Google, Yandex, and Facebook Click IDs will be removed from all requests. There's one exception: Google Click ID (gclid) will not be removed from requests to example.com.

Negating $removeparam for all parameters:

$removeparam=/^(utm_source|utm_medium|utm_term)=/
$removeparam=/^(utm_content|utm_campaign|utm_referrer)=/
@@||example.com^$removeparam

With these rules, specified UTM parameters will be removed from any request save for requests to example.org.

Compatibility with other modifiers $removeparam rules are compatible with basic modifiers, content-type modifiers, and with $important and $app modifiers. The rules which have any other modifiers are considered invalid and will be discarded.

Please note that $removeparam rules can also be disabled by $document and $urlblock exception rules. But basic exception rules without modifiers don't do that. For example, @@||example.com^ will not disable $removeparam=p for requests to example.com, but @@||example.com^$urlblock will.

Compatibility with different versions of AdGuard. Rules with this modifier are supported by AdGuard for Windows, Mac, Android, and AdGuard browser extensions for Chrome, Firefox, Edge. Developer builds only at this moment.

Restrictions. Please note that this type of rules can be used only in trusted filters. This category includes your own User filter and all the filters created by AdGuard Team.

`important`

The $important modifier applied to a rule increases its priority over any other rule without $important modifier. Even over basic exception rules.

Example 1:

||example.org^$important
@@||example.org^

||example.org^$important will block all requests despite of the exception rule.

Example 2:

||example.org^$important
@@||example.org^$important

Now the exception rule also has $important modifier so it will prevail.

Example 3:

The $important modifier will be ignored if a document-level exception rule is applied to the document.

||example.org^$important
@@||test.org^$document

If a request to example.org is sent from the test.org domain, the rule won't be applied despite it has the $important modifier.

`badfilter`

The rules with the badfilter modifier disable other basic rules to which they refer. It means that the text of the disabled rule should match the text of the badfilter rule (without the badfilter modifier).

Examples:

||example.com$badfilter disables ||example.com
||example.com$image,badfilter disables ||example.com,image
@@||example.com$badfilter disables @@||example.com
||example.com$domain=domain.com,badfilter disables ||example.com$domain=domain.com

Rules with $badfilter modifier can disable other basic rules for specific domains if they fulfil the following conditions:

The rule has a $domain modifier
The rule does not have a negated domain ~ in $domain modifier's value.

In that case, the $badfilter rule will disable the corresponding rule for domains specified in both the $badfilter and basic rules. Please note, that wildcard-TLD logic works here as well.

Examples:

/some$domain=example.com|example.org|example.io is disabled for example.com by /some$domain=example.com,badfilter
/some$domain=example.com|example.org|example.io is disabled for example.com and example.org by /some$domain=example.com|example.org,badfilter
/some$domain=example.com|example.org and /some$domain=example.io are disabled completely by /some$domain=example.com|example.org|example.io,badfilter
/some$domain=example.com|example.org|example.io is disabled completely by /some$domain=example.*,badfilter
/some$domain=example.* is disabled for example.com and example.org by /some$domain=example.com|example.org,badfilter
/some$domain=example.com|example.org|example.io is NOT disabled for example.com by /some$domain=example.com|~example.org,badfilter because the value of domain modifier contains a negated domain

`empty`

Usually, blocked requests look like a server error to browser. If you use empty modifier, AdGuard will emulate a blank response from the server with 200 OK status.

`empty` example

||example.org^$empty — returns an empty response to all requests to example.org and all subdomains.

Deprecation notice. Rules with this modifier are deprecated in favor of the $redirect modifier. Please note that it will be removed in the future.

Compatibility with different versions of AdGuard. Rules with this modifier are not supported by AdGuard for Safari and iOS.

`mp4`

As a response to blocked request AdGuard returns a short video placeholder.

`mp4` example

||example.com/videos/$mp4 — block a video downloads from ||example.com/videos/* and changes the response to a video placeholder.

Deprecation notice. Rules with this modifier are deprecated in favor of the $redirect modifier. Please note that it will be removed in the future.

Compatibility with different versions of AdGuard. Rules with this modifier are not supported by AdGuard for Safari and iOS.

`replace`

This modifier completely changes the rule behavior. If it is applied, the rule will not block the request. The response is going to be modified instead.

Please note

You will need some knowledge of regular expressions to use this modifier.

`$replace` rules features

$replace rules apply to any text response, but will not apply to binary (media, image, object, etc).
$replace rules do not apply if the size of the original response is more than 3MB.
$replace rules have a higher priority than other basic rules (including exception rules). So if a request corresponds to two different rules one of which has the $replace modifier, this rule will be applied.
Document-level exception rules with $content or $document modifiers do disable $replace rules for requests matching them.
Other document-level exception rules ($generichide, $elemhide or $jsinject modifiers) are applied alongside $replace rules. It means that you can modify the page's content with a $replace rule and disable cosmetic rules there at the same time.

$replace value can be empty in the case of exception rules. See examples section for further information.

Multiple rules matching a single request. In case if multiple $replace rules match a single request, we will apply each of them. The order is defined alphabetically.

$replace Syntax

In general, replace syntax is similar to replacement with regular expressions in Perl.

replace = "/" regex "/" replacement "/" modifiers

regex — regular expression.
replacement — a string that will be used to replace the string corresponding to regex.
modifiers — regular expression flags. For example, i - insensitive search, or s - single-line mode.

In the $replace value, two characters must be escaped: comma (,) and ($). Use (\) for it. For example, an escaped comma looks like this: \,.

`$replace` example

||example.org^$replace=/(<VAST[\s\S]*?>)[\s\S]*<\/VAST>/\$1<\/VAST>/

There are three parts in this rule:

Regular expression: (<VAST(.|\s)*?>)(.|\s)*<\/VAST>
Replacement: \$1<\/VAST> (please note that $ is escaped)
Regular expression flags: i (insensitive search)

You can see how this rule works here: http://regexr.com/3cesk

Multiple `$replace` rules example

||example.org^$replace=/X/Y/
||example.org^$replace=/Z/Y/
@@||example.org/page/*$replace=/Z/Y/

Both rule 1 and 2 will be applied to all requests sent to example.org.
Rule 2 is disabled for requests matching ||example.org/page/, but rule 1 still works!.

Disabling `$replace` rules

@@||example.org^$replace will disable all $replace rules matching ||example.org^.
@@||example.org^$document or @@||example.org^$content will disable all $replace rules originated from pages of example.org including the page itself.

Compatibility with different versions of AdGuard. These rules are supported by AdGuard for Windows, Mac, Android and by the AdGuard's Firefox add-on. This type of rules don't work in extensions for other browsers because they are unable to modify content on the network level.

Restrictions. Please note that this type of rules can be used only in trusted filters. This category includes your own User filter and all the filters created by AdGuard Team.

`csp`

This modifier completely changes the rule behavior. If it is applied to a rule, it will not block the matching request. The response headers are going to be modified instead.

In order to use this type of rules, it is required to have the basic understanding of the Content Security Policy security layer.

For the requests matching a $csp rule, we will strengthen response's security policy by adding additional content security policy equal to the $csp modifier contents. $csp rules are applied independently from any other rule type. Other basic rules have no influence on it save for document-level exceptions (see the examples section).

Multiple rules matching a single request. In case if multiple $csp rules match a single request, we will apply each of them.

`csp` syntax

$csp value syntax is similar to the Content Security Policy header syntax.

$csp value can be empty in the case of exception rules. See examples section for further information.

Limitations

Please note that there're a few characters forbidden in the $csp value: (,), ($)

csp rules support limited list of modifiers: domain, important, subdocument

Rules with report-* directives are considered invalid.

`csp` examples

||example.org^$csp=frame-src 'none' — prohibits all frames on example.org and it's subdomains.
@@||example.org/page/*$csp=frame-src 'none' — disables all rules with the $csp modifier exactly matching frame-src 'none' on all the pages matching the rule pattern. For instance, the rule above.
@@||example.org/page/*$csp — disables all the $csp rules on all the pages matching the rule pattern.
||example.org^$csp=script-src 'self' 'unsafe-eval' http: https: — disables inline scripts on all the pages matching the rule pattern.
@@||example.org^$document or @@||example.org^$urlblock — disables all the $csp rules on all the pages matching the rule pattern.

The $cookie modifier completely changes rule behavior. Instead of blocking a request, this modifier makes us suppress or modify the Cookie and Set-Cookie headers.

Multiple rules matching a single request. In case if multiple $cookie rules match a single request, we will apply each of them one by one.

`$cookie` syntax

The rule syntax depends on whether we are going to block all cookies or to remove a single cookie. The rule behavior can be changed with maxAge and sameSite modifiers.

||example.org^$cookie=NAME;maxAge=3600;sameSite=lax -- every time AdGuard encounters a cookie called NAME in a request to example.org, it will do the following:
- Set its expiration date to current time plus 3600 seconds
- Makes the cookie use Same-Site "lax" strategy.
||example.org^$cookie -- blocks ALL cookies set by example.org. This is an equivalent to setting maxAge to zero.
||example.org^$cookie=NAME -- blocks a single cookie named NAME
||example.org^$cookie=/regular_expression/ -- blocks every cookie that matches a given regular expression

Important: in the case of a regular expression matching, two characters must be escaped: comma (,) and ($). Use (\) for it. For example, escaped comma looks like this: \,.

$cookie rules are not affected by regular exception rules (@@) unless it's a $document exception. In order to disable a $cookie rule, the exception rule should also have a $cookie modifier. Here's how it works:

@@||example.org^$cookie -- unblocks all cookies set by example.org
@@||example.org^$cookie=NAME -- unblocks a single cookie named NAME
@@||example.org^$cookie=/regular_expression/ -- unblocks every cookie matching a given regular expression

Limitations: $cookie rules support a limited list of modifiers: domain, ~domain, important, third-party, ~third-party.

Real-life examples

$cookie=__cfduid -- blocks CloudFlare cookie everywhere
$cookie=/__utm[a-z]/ -- blocks Google Analytics cookies everywhere
||facebook.com^$third-party,cookie=c_user -- prevents Facebook from tracking you even if you are logged in

Compatibility with different versions of AdGuard. This type of rules is not supported by AdGuard for iOS and Safari.

`network`

This is basically a Firewall-kind of rules allowing to fully block or unblock access to a specified remote address.

$network rules match IP addresses only! You cannot use it to block or unblock access to a domain.
To match an IPv6 address, you have to use the collapsed syntax, e.g. use [2001:4860:4860::8888]$network instead of [2001:4860:4860:0:0:0:0:8888]$network.
A whitelist $network rule makes AdGuard bypass data to the matching endpoint, e.g. there will be no further filtering at all.

`network` examples

174.129.166.49:3478^$network - blocks access to 174.129.166.49:3478 (but not to 174.129.166.49:34788).
[2001:4860:4860::8888]:443^$network - blocks access to [2001:4860:4860::8888]:443.
174.129.166.49$network - blocks access to 174.129.166.49:*.
@@174.129.166.49$network - makes AdGuard bypass data to the endpoint. No other rules will be applied.

Compatibility with different versions of AdGuard. Only AdGuard for Windows, Mac, Android are technically capable of using this type of rules.

`app`

This modifier lets you narrow the rule coverage down to a specific application (or a list of applications). This might be not too important on Windows and Mac, but this is very important on Mobile where some of the filtering rules must be application-specific.

Android - use the apps' package names (i.e. org.example.app).
Windows - use the process name (i.e. chrome.exe).
Mac - use the bundle ID or the process name (i.e. com.google.Chrome).

For Mac, you can find out the bundle ID or the process name of the app by viewing the respective request details in the Filtering log

In the case of Android, use the apps' package names (i.e. org.example.app). In the case of Windows

`app` examples

||baddomain.com^$app=org.example.app — a rule to block requests that match the specified mask, and are sent from the com.adguard.android Android app.
||baddomain.com^$app=org.example.app1|org.example.app2 — the same rule, but it works for both org.example.app1 and org.example.app2 apps.

If you want the rule not to be applied to certain apps, start the app name with ~ sign.

`app` and `~` examples

||baddomain.com^$app=~org.example.app — a rule to block requests that match the specified mask, and are sent from any app save for the org.example.app.
||baddomain.com^$app=~org.example.app1|~org.example.app2 — same as above, but now two apps are excluded: org.example.app1 and org.example.app2.

Compatibility with different versions of AdGuard. Only AdGuard for Windows, Mac, Android are technically capable of using this type of rules.

`redirect`

AdGuard is able to redirect web requests to a local "resource".

`redirect` syntax

AdGuard uses the same filtering rules syntax as uBlock Origin. Also, it is compatible with ABP $rewrite=abp-resource modifier.

$redirect is a modifier for the basic filtering rules so rules with this modifier support all other basic modifiers like $domain, $third-party, $script, etc.

The value of the $redirect modifier must be the name of the resource that will be used for redirection.

$redirect rules' priority is higher than the regular basic blocking rules' priority. This means that if there's a basic blocking rule (even with $important modifier), $redirect rule will prevail over it. If there's a whitelist (@@) rule matching the same URL, it will disable redirecting as well (unless the $redirect rule is also marked as $important).

Disabling `$redirect` rules

@@||example.org^$redirect will disable all $redirect rules for URLs that match ||example.org^.
@@||example.org^$redirect=redirectName will disable all rules with $redirect=redirectName for any request that matches ||example.org^.

`redirect` examples

||example.org/script.js$script,redirect=noopjs

This rule redirects all requests to example.org/script.js to the resource named noopjs.

||example.org/test.mp4$media,redirect=noopmp4-1s

This rule redirects all requests to example.org/test.mp4 to the resource named noopmp4-1s.

More information on scriptlets, redirects, and their usage is available in this GitHub section.

Compatibility with different versions of AdGuard. This type of rules is not supported by AdGuard for iOS and Safari.

`redirect-rule`

This is basically an alias to $redirect since it has the same "redirection" values and the logic is almost similar. The difference is that $redirect-rule is applied only in the case when the target request is blocked by a different basic rule.

Negating $redirect-rule works exactly the same way as for regular $redirect rules. Even more than that, @@||example.org^$redirect will negate both $redirect and $redirect-rule rules.

Examples:

||example.org/script.js
||example.org^$redirect-rule=noopjs

In this case, only requests to example.org/script.js will be "redirected". All other requests to example.org will be kept intact.

`denyallow`

denyallow modifier allows to avoid creating additional rules when it is needed to disable a certain rule for a specific domain(s). denyallow matches only target domains and not referrer domains.

Adding this modifier to a rule is equivalent to excluding the domains by the rule's matching pattern or to adding the corresponding exclusion rules. To add multiple domains to one rule, use the | character as a separator.

Please note that rules with the $denyallow modifier have the following restrictions:

the rule's matching pattern cannot target any specific domain(s) (e.g., it can't start with ||)
domains in the modifier's parameter cannot be negated (e.g. $denyallow=~x.com) or have a wildcard TLD (e.g. $denyallow=x.*)

The rules which violate these restrictions are considered invalid.

Example:

This rule:

*$script,domain=a.com|b.com,denyallow=x.com|y.com

is equivalent to this one:

/^(?!.*(x.com|y.com)).*$/$script,domain=a.com|b.com

or to these three:

*$script,domain=a.com|b.com
@@||x.com$script,domain=a.com|b.com
@@||y.com$script,domain=a.com|b.com

`noop`

noop modifier does nothing and can be used solely to increase rules' readability. It consists of a sequence of underscore characters (_) of any length and can appear in a rule as many times as needed.

`noop` examples:

||example.com$_,removeparam=/^ss\\$/,_,image
||example.com$replace=/bad/good/,___,~third-party

Compatibility with different versions of AdGuard. Available in Developer builds only at this moment.

`$removeheader`

Rules with $removeheader modifier are intended to remove headers from HTTP requests and responses. The initial motivation for this rule type is to be able to get rid of the Refresh header which is often used to redirect users to an undesirable location. However, this is not the only case where this modifier can be useful.

Just like $csp, $redirect, $removeparam, and $cookie, this modifier exists independently, rules with it do not depend on the regular basic rules, i.e. regular exception or blocking rules will not affect it. By default, it only affects response headers. However, you can also change it to remove headers from HTTP requests as well.

Syntax

Basic syntax

||example.org^$removeheader=header-name — removes a response header called header-name
||example.org^$removeheader=request:header-name — removes a request header called header-name

Please note, that $removeheader is case-insensitive, but we suggest always using lower case.

Negating $removeheader

This type of rules works pretty much the same way it works with $csp and $redirect modifiers.

Use @@ to negate $removeheader:

@@||example.org^$removeheader — negates all $removeheader rules for URLs that match ||example.org^.
@@||example.org^$removeheader=header — negates the rule with $removeheader=header for any request matching ||example.org^.
$removeheader rules can also be disabled by $document and $urlblock exception rules. But basic exception rules without modifiers don't do that. For example, @@||example.com^ will not disable $removeheader=p for requests to example.com, but @@||example.com^$urlblock will.

Multiple rules matching a single request In case of multiple $removeheader rules matching a single request, we will apply each of them one by one.

Restrictions

Please note that this type of rules can be used only in trusted filters. This category includes your own User rules and all the filters created by AdGuard Team.
In order to avoid compromising the security $removeheader cannot remove headers from the list below:

access-control-allow-origin
access-control-allow-credentials
access-control-allow-headers
access-control-allow-methods
access-control-expose-headers
access-control-max-age
access-control-request-headers
access-control-request-method
origin
timing-allow-origin
allow
cross-origin-embedder-policy
cross-origin-opener-policy
cross-origin-resource-policy
content-security-policy
content-security-policy-report-only
expect-ct
feature-policy
origin-isolation
strict-transport-security
upgrade-insecure-requests
x-content-type-options
x-download-options
x-frame-options
x-permitted-cross-domain-policies
x-powered-by
x-xss-protection
public-key-pins
public-key-pins-report-only
sec-websocket-key
sec-websocket-extensions
sec-websocket-accept
sec-websocket-protocol
sec-websocket-version
p3p
sec-fetch-mode
sec-fetch-dest
sec-fetch-site
sec-fetch-user
referrer-policy
content-type
content-length
accept
accept-encoding
host
connection
transfer-encoding
upgrade

$removeheader rules are not compatible with any other modifiers except $domain, $third-party, $app, $important, $match-case, and content type modifiers (e.g. $script, $stylesheet, etc). The rules which have any other modifiers are considered invalid and will be discarded.

Examples

||example.org^$removeheader=refresh — removes Refresh header from all HTTP responses returned by example.org and it's subdomains.
||example.org^$removeheader=request:x-client-data — removes X-Client-Data header from all HTTP requests.
This block of rules removes Refresh and Location headers from all HTTP responses returned by example.org save for requests to example.org/path/*, for which no headers will be removed:
```
||example.org^$removeheader=refresh
||example.org^$removeheader=location
@@||example.org/path/$removeheader
```

Compatibility with different versions of AdGuard. Available in Developer builds only at this moment.

Non-basic rules

However, the capabilities of the basic rules may not be sufficient to block ads. Sometimes you need to hide an element or change part of the HTML code of a web page without breaking anything. The rules described in this section are created specifically for this purpose.

Cosmetic rules

Work with non-basic rules requires the basic knowledge of HTML and CSS. So, if you want to learn how to make such rules, we recommend to get acquainted with this documentation.

Element hiding rules

Element hiding rules are used to hide the elements of web pages. It is similar to applying { display: none; } style to selected element.

Note that element hiding rules may operate differently depending on the platform.

Syntax

   rule = [domains] "##" selector
domains = [domain0, domain1[, ...[, domainN]]]

selector — CSS selector, defines the elements to be hidden.
domains — domain restriction for the rule.

If you want to limit the rule application area to certain domains, just enter them separated with commas. For example: example.org,example.com##selector.

Please note that this rule will be also applied to all subdomains of example.org and example.com.

If you want the rule not to be applied to certain domains, start a domain name with ~ sign. For example: ~example.org##selector.

You can use both approaches in a single rule. For example, example.org,~subdomain.example.org##domain will work for example.org and all subdomains, except subdomain.example.org.

Please note, element hiding rules are not dependent on each other. If there is a rule example.org##selector in the filter and you add ~example.org##selector both rules will be applied independently.

Examples

example.com##div.textad — hides a div with a class textad at example.com and all subdomains.
example.com,example.org###adblock - hides an element with attribute id equals adblock at example.com, example.org and all subdomains.
~example.com##.textad - hides an element with a class textad at all domains, except example.com and it's subdomains.

Important! Safari doesn't support both permitted and restricted domains. So the rules like example.org,~foo.example.org##.textad are invalid in AdGuard for Safari.

Exceptions

Exceptions can disable some rules on particular domains. They are very similar to usual exception rules, but instead of ## you have to use #@#.

For example, there is a rule in filter:

##.textad

If you want to disable it for example.com, you can create an exception rule:

example.com#@#.textad

Sometimes, it may be necessary to disable all restriction rules. For example, to conduct tests. To do this, use the exclusion rule without specifying a domain. It will completely disable matching CSS elemhide rule on ALL domains:

#@#.textad

The same can be achieved by adding this rule:

*#@#.textad

We recommend to use this kind of exceptions only if it is not possible to change the hiding rule itself. In other cases it is better to change the original rule, using domain restrictions.

CSS rules

Sometimes, simple hiding of an element is not enough to deal with advertising. For example, blocking an advertising element can just break the page layout. In this case AdGuard can use rules that are much more flexible than hiding rules. With this rules you can basically add any CSS styles to the page.

Restrictions. Styles that lead to loading any resource are forbidden. Basically, it means that you cannot use any <url> type of value in the style.

Compatibility with different versions of AdGuard. CSS rules are not supported by AdGuard for iOS.

Note that CSS rules may operate differently depending on the platform.

Syntax

   rule = [domains] "#$#" selector "{" style "}"
domains = [domain0, domain1[, ...[, domainN]]]

selector — CSS selector, defines the elements we want to apply the style to.
domains — domain restriction for the rule. Same principles as in element hiding rules.
style — CSS style, that we want to apply to selected elements.

Examples

example.com#$#body { background-color: #333!important; }

This rule will apply a style background-color: #333!important; to the body element at example.com and all subdomains.

Exceptions

Just like with element hiding, there is a type of rules that disable the selected CSS style rule for particular domains. Exception rules syntax is almost the same, you just have to change #$# to #@$#.

For example, there is a rule in filter:

#$#.textad { visibility: hidden; }

If you want to disable it for example.com, you can create an exception rule:

example.com#@$#.textad { visibility: hidden; }

We recommend to use this kind of exceptions only if it is not possible to change the CSS rule itself. In other cases it is better to change the original rule, using domain restrictions.

Extended CSS selectors

CSS 3.0 is not always enough to block ads. To solve this problem AdGuard extends CSS capabilities by adding support for the new pseudo-elements. To use extended CSS selectors we have developed a separate open source module.

Application area. Extended selectors can be used in any cosmetic rule, whether they are element hiding rules or CSS rules.

Compatibility with different versions of AdGuard. Note that CSS rules are not supported by AdGuard for iOS.

Syntax

Regardless of the CSS pseudo-classes you are using in the rule, you can use special markers to make these rules use the "Extended CSS" engine. It is recommended to use these markers for all "extended CSS" cosmetic rules so that it was easier to find them. The syntax for extended CSS rules:

#?# — for element hiding (#@?# — for exceptions )
#$?# — for CSS injection (#@$?# — for exceptions )

We strongly recommend using these markers any time when you use an extended CSS selector.

Examples

example.org#?#div:has(> a[target="_blank"][rel="nofollow"]) — this rule will block all div elements that contain link as a child node with [target="_blank"][rel="nofollow"] attributes. The rule will only work for example.org and all it's subdomains.
example.com#$?#h3:contains(cookies) { display: none!important; } — this rule will set style display: none!important for all h3 elements that contain cookies word. The rule will only work for example.com and all it's subdomains.
example.net#?#.banner:matches-css(width: 360px) — this rule will block all .banner elements that contain width: 360px style property. The rule will only work for example.net and all it's subdomains.
example.net#@?#.banner:matches-css(width: 360px) — this rule will disable the previous rule.

Please note that now you can apply simple selectors using the ExtCss engine by using a rule like this: #?#div

For more information on how to debug ExtendedCSS selectors, jump to this section of the artcile.

Pseudo-class `:has()`

Draft CSS 4.0 specification describes pseudo-class :has. Unfortunately, it is not yet supported by browsers.

Syntax

:has(selector)

Backward compatible syntax:

[-ext-has="selector"]

Supported synonyms for better compatibility: :-abp-has, :if.

Pseudo-class :has() selects the elements that includes the elements that fit to selector.

Examples

Selecting all div elements, which contain an element with the banner class:

<!-- HTML code -->
<div>Do not select this div</div>
<div>Select this div<span class="banner"></span></div>

Selector:

div:has(.banner)

Backward compatible syntax:

div[-ext-has=".banner"]

Pseudo-class `:if-not()`

This pseudo-class is basically a shortcut for :not(:has()). It is supported by ExtendedCss for better compatibility with some filters subscriptions, but it is not recommended to use it in AdGuard filters. The rationale is that one day browsers will add :has native support, but it will never happen to this pseudo-class.

Pseudo-class `:contains()`

This pseudo-class principle is very simple: it allows to select the elements that contain specified text or which content matches a specified regular expression. Regex flags are supported. Please note that this pseudo-class uses textContent element property for matching (and not the innerHTML).

Syntax

// matching by plain text
:contains(text)

// matching by a regular expression
:contains(/regex/i)

Backward compatible syntax:

// matching by plain text
[-ext-contains="text"]

// matching by a regular expression
[-ext-contains="/regex/"]

Supported synonyms for better compatibility: :-abp-contains, :has-text.

Examples

Selecting all div elements, which contain text banner:

<!-- HTML code -->
<div>Do not select this div</div>
<div id="selected">Select this div (banner)</div>
<div>Do not select this div <div class="banner"></div></div>

Selector:

// matching by plain text
div:contains(banner)

// matching by a regular expression
div:contains(/this .* banner/)

// also with regex flags
div:contains(/this .* banner/gi)

Backward compatible syntax:

// matching by plain text
div[-ext-contains="banner"]

// matching by a regular expression
div[-ext-contains="/this .* banner/"]

Please note that in this example only a div with id=selected will be selected, because the next element does not contain any text; banner is a part of code, not a text.

Pseudo-class `:matches-css()`

These pseudo-classes allow to select an element by its current style property. The work of this pseudo-class is based on using the window.getComputedStyle function.

Syntax

/* element style matching */
selector:matches-css(property-name ":" pattern)

/* ::before pseudo-element style matching */
selector:matches-css-before(property-name ":" pattern)

/* ::after pseudo-element style matching */
selector:matches-css-after(property-name ":" pattern)

Backward compatible syntax:

selector[-ext-matches-css="property-name ":" pattern"]
selector[-ext-matches-css-after="property-name ":" pattern"]
selector[-ext-matches-css-before="property-name ":" pattern"]

property-name — a name of CSS property to check the element for
pattern — a value pattern that is using the same simple wildcard matching as in the basic url filtering rules OR a regular expression. For this type of matching, AdGuard always does matching in a case insensitive manner. In the case of a regular expression, the pattern looks like /regex/.

For non-regex patterns, (,),[,] must be unescaped, because we require escaping them in the filtering rules.

For regex patterns, " and \ should be escaped, because we manually escape those in extended-css-selector.js.

Examples

Selecting all div elements which contain pseudo-class ::before with specified content:

<!-- HTML code -->
<style type="text/css">
    #to-be-blocked::before {
        content: "Block me"
    }
</style>
<div id="to-be-blocked" class="banner"></div>
<div id="not-to-be-blocked" class="banner"></div>

Selector:

// Simple matching
div.banner:matches-css-before(content: block me)

// Regular expressions
div.banner:matches-css-before(content: /block me/)

Backward compatible syntax:

// Simple matching
div.banner[-ext-matches-css-before="content: block me"]

// Regular expressions
div.banner[-ext-matches-css-before="content: /block me/"]

Pseudo-class `:matches-attr()`

This pseudo-class allows to select an element by its attributes, especially if they are randomized.

Syntax

selector:matches-attr("name"[="value"])

name — attribute name OR regular expression for attribute name
value — optional, attribute value OR regular expression for attribute value

For regex patterns, " and \ should be escaped.

Examples

<!-- HTML code -->
<div id="targer1" class="matches-attr" hsd4jkf-link="ssdgsg-banner_240x400"></div>

<div id="targer2" class="has matches-attr">
  <div data-sdfghlhw="adbanner"></div>
</div>

<div id="targer3-host" class="matches-attr has contains">
  <div id="not-targer3" wsdfg-unit012="click">
    <span>socials</span>
  </div>
  <div id="targer3" hrewq-unit094="click">
    <span>ads</span>
  </div>
</div>

<div id="targer4" class="matches-attr upward">
  <div >
    <inner-afhhw class="nyf5tx3" nt4f5be90delay="1000"></inner-afhhw>
  </div>
</div>

// for div#targer1
div:matches-attr("/-link/")

// for div#targer2
div:has(> div:matches-attr("/data-/"="adbanner"))

// for div#targer3
div:matches-attr("/-unit/"="/click/"):has(> span:contains(ads))

// for div#targer4
*[class]:matches-attr("/.{5,}delay$/"="/^[0-9]*$/"):upward(2)

Pseudo-class `:matches-property()`

This pseudo-class allows to select an element by its properties.

Syntax

selector:matches-property("name"[="value"])

name — property name OR regular expression for property name
value — optional, property value OR regular expression for property value

For regex patterns, " and \ should be escaped.

name supports regexp for property in chain, e.g. prop./^unit[\\d]{4}$/.type

Examples

divProperties = {
    id: 1,
    check: {
        track: true,
        unit_2ksdf1: true,
    },
    memoizedProps: {
        key: null,
        tag: 12,
        _owner: {
            effectTag: 1,
            src: 'ad.com',
        },
    },
};

// element with such properties can be matched by any of such rules:

div:matches-property("check.track")

div:matches-property("check./^unit_.{4,6}$/"))

div:matches-property("memoizedProps.key"="null")

div:matches-property("memoizedProps._owner.src"="/ad/")

For filters maintainers

To check properties of specific element, do:

Select the element on the page.
Go to Console tab and run console.dir($0).

Pseudo-class `:xpath()`

This pseudo-class allows to select an element by evaluating an XPath expression.

Limited to work properly only at the end of selector, except of pseudo-class :remove().

The :xpath() pseudo-class is different from other pseudo-classes. Whereas all other operators are used to filter down a resultset of elements, the :xpath() operator can be used both to create a new resultset or filter down an existing one. For this reason, subject selector is optional. For example, an :xpath() operator could be used to create a new resultset consisting of all ancestor elements of a subject element, something not otherwise possible with either plain CSS selectors or other procedural operators.

Syntax

[selector]:xpath(expression)

selector- optional, a plain CSS selector, or a Sizzle compatible selector
expression — a valid XPath expression

Examples

// Filtering results from selector
div:xpath(//*[@class="test-xpath-class"])
div:has-text(/test-xpath-content/):xpath(../../..)

// Use xpath only to select elements
facebook.com##:xpath(//div[@id="stream_pagelet"]//div[starts-with(@id,"hyperfeed_story_id_")][.//h6//span/text()="People You May Know"])

Pseudo-class `:nth-ancestor()`

This pseudo-class allows to lookup the nth ancestor relative to the currently selected node.

It is a low-overhead equivalent to :xpath(..[/..]*).

Limited to work properly only at the end of selector, except of pseudo-class :remove().

Syntax

selector:nth-ancestor(n)

selector — a plain CSS selector, or a Sizzle compatible selector.
n — positive number >= 1 and < 256, distance from the currently selected node.

Examples

div.test:nth-ancestor(4)

div:has-text(/test/):nth-ancestor(2)

Pseudo-class `:upward()`

This pseudo-class allows to lookup the ancestor relative to the currently selected node.

Limited to work properly only at the end of selector, except of pseudo-class :remove().

Syntax

/* selector parameter */
subjectSelector:upward(targetSelector)

/* number parameter */
subjectSelector:upward(n)

subjectSelector — a plain CSS selector, or a Sizzle compatible selector
targetSelector — a valid plain CSS selector
n — positive number >= 1 and < 256, distance from the currently selected node

Examples

div.child:upward(div[id])
div:contains(test):upward(div[class^="parent-wrapper-")

div.test:upward(4)
div:has-text(/test/):upward(2)

Pseudo-class `:remove()` and pseudo-property `remove`

Sometimes, it is necessary to remove a matching element instead of hiding it or applying custom styles. In order to do it, you can use pseudo-class :remove() as well as pseudo-property remove.

Pseudo-class :remove() is limited to work properly only at the end of selector.

Syntax

! pseudo-class
selector:remove()

! pseudo-property
selector { remove: true; }

selector — a plain CSS selector, or a Sizzle compatible selector

Examples

div.inner:remove()
div:has(> div[ad-attr]):remove()
div:xpath(../..):remove()

div:contains(target text) { remove: true; }
div[class]:has(> a:not([id])) { remove: true; }

Please note that all style properties will be ignored if :remove() pseudo-class or remove pseudo-property is used.

Cosmetic rules priority

The way element hiding and CSS rules are applied is platform-specific.

In AdGuard for Windows, Mac, and Android, we use a stylesheet injected into the page. The priority of cosmetic rules is the same as any other websites' CSS stylesheet. But there is a limitation: element hiding and CSS rules cannot override inline styles. In such cases, it's recommended to use extended selectors or HTML filtering.

In AdGuard browser extensions, the so called "user stylesheets" are used. They have higher priority than even the inline styles.

Extended CSS selectors use Javascript to work and basically add an inline style themselves, therefore they can override any style.

HTML filtering rules

In most cases, the basis and cosmetic rules are enough to filter ads. But sometimes it is necessary to change the HTML-code of the page itself before it is loaded. This is when you need filtering rules for HTML content. They allow to indicate the HTML elements to be cut out before the browser loads the page.

Compatibility with different versions of AdGuard. Rules are supported by AdGuard for Windows, Mac, Android and by the AdGuard's Firefox add-on. This type of rules don't work in extensions for other browsers because they are unable to modify content on network level.

Syntax

      rule = [domains] "$$" tagName [attributes]
   domains = [domain0, domain1[, ...[, domainN]]]      
attributes = "[" name0 = value0 "]" "[" name1 = value2 "]" ... "[" nameN = valueN "]"

tagName — name of the element in lower case, for example div or script.
domains — domain restriction for the rule. Same principles as in element hiding rules syntax.
attributes — a list of attributes, that limit the elements selection. name - attribute name, value - substring, that is contained in attribute value.

Example

HTML code

<script data-src="/banner.js"></script>

Rule

example.org$$script[data-src="banner"]

This rule will delete all script elements with data-src attribute that contain banner substring. The rule will only work for example.org and all it's subdomains.

Special attributes

In addition to usual attribures, which value is every element checked for, there is a set of special attributes that change the way a rule works. Below there is a list of these attributes:

`tag-content`

This is the most frequently used special attribute. It limits selection with those elements whose innerHTML code contains the specified substring.

You should use "" to escape ", for instance: $$script[tag-content="alert(""this is ad"")"]

For example, let's take a look at this HTML code:

<script type="text/javascript">
    document.write('<div>banner text</div>" />');
</script>

Following rule will delete all script elements with a banner substring in their code:

$$script[tag-content="banner"]

Nested elements. If we are dealing with multiple nested elements and they all fall within the same HTML filtering rule, they all are going to be deleted.

`wildcard`

This special attribute works almost like tag-content and allows you to check the innerHTML code of the document. Rule will check if HTML code of the element fits to the search pattern.

You should use "" to escape ", for instance: $$script[wildcard=""banner""]

For example: $$script[wildcard="*banner*text*"]

It will check, if the element's code contains two consecutive substrings banner and text.

`max-length`

Specifies the maximum length for content of HTML element. If this parameter is set and the content length exceeds the value - a rule does not apply to the element.

Default value. If this parameter is not specified, the max-length is considered to be 8192.

For example:

$$div[tag-content="banner"][max-length="400"]

This rule will remove all the div elements, whose code contains the substring banner and the length of which does not exceed 400 characters.

`min-length`

Specifies the minimum length for content of HTML element. If this parameter is set and the content length is less than preset value - a rule does not apply to the element.

For example:

$$div[tag-content="banner"][min-length="400"]

This rule will remove all the div elements, whose code contains the substring banner and the length of which exceeds 400 characters.

Exceptions

Similar to hiding rules, there is a special type of rules that disable the selected HTML filtering rule for particular domains. The syntax is the same, you just have to change $$ to $@$ .

For example, there is a rule in filter:

$$script[tag-content="banner"]

If you want to disable it for example.com, you can create an exception rule:

example.com$@$script[tag-content="banner"]

Sometimes, it may be necessary to disable all restriction rules. For example, to conduct tests. To do this, use the exclusion rule without specifying a domain.

$@$script[tag-content="banner"]

We recommend to use this kind of exceptions only if it is not possible to change the hiding rule itself. In other cases it is better to change the original rule, using domain restrictions.

Javascript rules

AdGuard supports a special type of rules that allows you to inject any javascript code to websites pages.

Restrictions. Please note that this type of rules can be used only in trusted filters. This category includes your own User filter and all the filters created by AdGuard Team.

Compatibility with different versions of AdGuard. Javascript rules aren't supported by AdGuard for iOS.

We strongly recommend using scriptlets instead of Javascript rules whenever possible. JS rules are supposed to help with debugging, but as a long-time solution a scriptlet rule should be used.

Syntax

rule = [domains]  "#%#" script

domains — domain restriction for the rule. Same principles as in element hiding rules.
script — arbitrary javascript code in one string.

Examples

example.org#%#window.__gaq = undefined; — executes the code window.__gaq = undefined; on all pages at example.org and all subdomains.

Exceptions

Similar to hiding rules, there is a special type of rules that disable the selected javascript rule for particular domains. The syntax is the same, you just have to change #%# to #@%#.

For example, there is a rule in filter:

#%#window.__gaq = undefined;

If you want to disable it for example.com, you can create an exception rule:

example.com#@%#window.__gaq = undefined;

Sometimes, it may be necessary to disable all restriction rules. For example, to conduct tests. To do this, use the exclusion rule without specifying a domain.

#@%#window.__gaq = undefined;

We recommend to use this kind of exceptions only if it is not possible to change the hiding rule itself. In other cases it is better to change the original rule, using domain restrictions.

Scriptlet rules

Scriptlet is a JavaScript function that provides extended capabilities for content blocking. These functions can be used in a declarative manner in AdGuard filtering rules.

AdGuard supports a lot of different scriptlets. Please note that in order to achieve cross-blocker compatibility, we also support syntax of uBO and ABP.

Compatibility with different versions of AdGuard. Scriptlet rules aren't supported by AdGuard for iOS.

Syntax

rule = [domains]  "#%#//scriptlet(" scriptletName arguments ")"

scriptletName (mandatory) is a name of the scriptlet from AdGuard's scriptlets library arguments (optional) is a list of String arguments (no other types of arguments are supported)

Examples

example.org#%#//scriptlet("abort-on-property-read", "alert")

This rule will be applied to example.org pages (and its subdomains) and will execute the "abort-on-property-read" scriptlet with the "alert" parameter.

More information about scriptlets can be found on GitHub.

For more information on how to debug scriptlets, jump to this section of the artcile.

(#)

Modifiers

Each rule can be modified using the modifiers described in the following paragraphs.

Syntax

rule = "[$" modifiers "]" [rule text]
modifiers = modifier0[, modifier1[, ...[, modifierN]]]

modifier - set of the modifiers described below.
rule text - a rule to be modified.

For example: [$domain=example.com,app=test_app]##selector.

In the modifiers values of the following characters must be escaped: [, ], ,, and \ (unless it's used for the escaping). Use \ to escape them. For example, an escaped bracket looks like this: \].

app

app lets you narrow the rule coverage down to a specific application (or a list of applications).

The modifier's behavior and syntax perfectly match the corresponding $app modifier of basic rules.

app examples:

[$app=org.example.app]example.com##.textad - hides a div with a class textad at example.com and all subdomains in requests sent from the org.example.app Android app.
[$app=~org.example.app1|~org.example.app2]example.com##.textad - hides a div with a class textad at example.com and all subdomains in requests sent from any app except org.example.app1 and org.example.app2.
[$app=com.apple.Safari]example.org#%#//scriptlet('prevent-setInterval', 'check', '!300'). This rule will apply the corresponding scriptlet only in Safari browser on Mac.
[$app=org.example.app]#@#.textad — disables all ##.textad rules for all domains while using org.example.app.

Compatibility with different versions of AdGuard. This type of rules is supported by AdGuard for Windows, Mac and Android. Developer builds only at this moment.

domain

domain limits the rule application area to a list of domains (and their subdomains). The modifier's behavior and syntax perfectly match the corresponding $domain modifier of basic rules.

domain examples:

[$domain=example.com]##.textad — hides a div with a class textad at example.com and all subdomains.
[$domain=example.com|example.org]###adblock - hides an element with attribute id equals adblock at example.com, example.org and all subdomains.
[$domain=~example.com]##.textad - hides a div with a class textad at all domains, except example.com and it's subdomains.

Please note that there are 2 ways to specify domain restrictions for non-basic rules: 1) the "classic" way is to specify domains before rule mask and attributes: example.com##.textad 2) the modifier approach is to specify domains via domain modifier: [$domain=example.com]##.textad

But rules with mixed style domains restriction are considered invalid. So, for example, the rule [$domain=example.org]example.com##.textad will be rejected.

Compatibility with different versions of AdGuard. This type of rules is supported by AdGuard for Windows, Mac and Android. Developer builds only at this moment.

Information for filters maintainers

If you maintain a third-party filter that is known to AdGuard, you might be interested in the information presented in this section. Please note that hints will be applied to registered filters only. The filter is considered to be registered and known by AdGuard, if it is present in the known filters index. If you want your filter to be registered, please file an issue to AdguardFilters repo.

Pre-processor directives

We provide pre-processor directives that can be used by filters maintainers to improve compatibility with different ad blockers and provide:

including a file
applying rules conditionally by ad blocker type
content blocker specifying for rules applying in Safari

Please note that any mistake in a pre-processor directive will lead to AdGuard failing the filter update in the same way as if the filter URL was unavailable.

Pre-processor directives can be used in the User Rules or in the custom filters.

Including a file

The !#include directive allows to include contents of a specified file into the filter. It supports only files from the same origin to make sure that the filter maintainer is in control of the specified file. The included file can also contain pre-processor directives (even other !#include directives). Ad blockers should consider the case of recursive !#include and implement a protection mechanism.

Syntax

!#include file_path

file_path — same origin absolute or relative file path to be included

The files must originate from the same domain but may be located in a different folder.

If included file is not found or unavailable, the whole filter update should fail.

Same-origin limitation should be disabled for local custom filters.

Examples

Filter URL: https://example.org/path/filter.txt

! Valid (same origin):
!#include https://example.org/path/includedfile.txt
!
! Valid (relative path):
!#include /includedfile.txt
!#include ../path2/includedfile.txt
!
! Invalid (another origin):
!#include https://domain.com/path/includedfile.txt

Conditions

Filters maintainers can use conditions to supply different rules depending on the ad blocker type. When an adblocker encounters an !#if directive, followed eventually by an !#endif directive, it will compile the code inside of the directives block only if the specified condition is true. Condition supports all the basic logical operators.

A conditional directive beginning with an !#if directive must explicitly be terminated with an !#endif directive.

Whitespaces matter. !#if is a valid directive, while !# if is not.

Syntax

!#if (conditions)
rules_list
!#endif

!#if (conditions) — start of the block
conditions — just like in some popular programming languages, pre-processor conditions are based on constants declared by ad blockers. Ad blocker authors define on their own what exact constants do they declare. Possible values:
- adguard — declared always; shows maintainers that this is one of AdGuard products; should be enough in 95% of cases
- product-specific constants for cases when you need a rule to work (or not work — then ! should be used before constant) in a specific product only:
  - adguard_app_windows — AdGuard for Windows
  - adguard_app_mac — AdGuard for Mac
  - adguard_app_android — AdGuard for Android
  - adguard_app_ios — AdGuard for iOS
  - adguard_ext_safari — AdGuard for Safari
  - adguard_ext_chromium — AdGuard Browser extension for Chrome (and chromium-based browsers, e.g. new Microsoft Edge)
  - adguard_ext_firefox — AdGuard Browser extension for Firefox
  - adguard_ext_edge — AdGuard Browser extension for Edge Legacy
  - adguard_ext_opera — AdGuard Browser extension for Opera
  - adguard_ext_android_cb — AdGuard Content Blocker for mobile Samsung and Yandex browsers
  - ext_ublock — special case; this one is declared when a uBlock version of a filter is compiled by the FiltersRegistry
rules_list — list of rules
!#endif — end of the block

Examples

! for all AdGuard propucts except AdGuard for Safari
!#if (adguard && !adguard_ext_safari)
||example.org^$third-party
domain.com##div.ad
!#endif

! directives even can be combined
!#if (adguard_app_android)
!#include /androidspecific.txt
!#endif

Safari affinity

Safari is notoriously known for its harsh 50k max limit for filtering rules in content blockers. But in AdGuard for Safari and AdGuard for iOS max rule count is raised to 300k by splitting them into several content blockers. Generally, several filters categories are more or less independent, so there is such content blockers with such categories included:

AdGuard General — Ad Blocking, Language-specific
AdGuard Privacy — Privacy
AdGuard Social — Social Widgets, Annoyances
AdGuard Security — Security
AdGuard Other — Other
AdGuard Custom — Custom

User rules and Allowlist are added to every content blocker.

The main issue with using multiple content blockers is that rules inside these content blockers cannot influence each other. This may lead to different unexpected issues. So filters maintainers may use !#safari_cb_affinity to define Safari content blockers affinity for the rules inside of the directive block.

Syntax

!#safari_cb_affinity(content_blockers)
rules_list
!#safari_cb_affinity

!#safari_cb_affinity(content_blockers) — start of the block
content_blockers — comma-separated list of content blockers. Possible values:
- general — AdGuard General content blocker
- privacy — AdGuard Privacy content blocker
- social — AdGuard Social content blocker
- security — AdGuard Security content blocker
- other — AdGuard Other content blocker
- custom — AdGuard Custom content blocker
- all — special keyword that means that the rules must be included into all content blockers
rules_list — list of rules
!#safari_cb_affinity(content_blockers) — end of the block

Examples

! to unhide specific element which is hidden by AdGuard Base filter:
!#safari_cb_affinity(general)
example.org#@#.adBanner
!#safari_cb_affinity

! to whitelist basic rule from AdGuard Tracking Protection filter filter:
!#safari_cb_affinity(privacy)
@@||example.org^
!#safari_cb_affinity

Hints

"Hint" is a special comment, instruction to the filters compiler used on the server side (see FiltersRegistry).

Syntax

!+ HINT_NAME1(PARAMS) HINT_NAME2(PARAMS)

Note, that you can apply multiple hints.

NOT_OPTIMIZED hint

For each filter, AdGuard compiles two versions: full and optimized. Optimized version is much more lightweight and does not contain rules which are not used at all or used rarely.

Rules usage frequency comes from the collected filter rules statistics. But filters optimization is based on more than that — some filters have specific configuration. This is how it looks like for Base filter:

"filter": AdGuard Base filter,
"percent": 30,
"minPercent": 20,
"maxPercent": 40,
"strict": true

Where:

filter — filter identifier
percent — expected optimization percent ~= (rules count in optimized filter) / (rules count in original filter) * 100
minPercent — lower bound of percent value
maxPercent — upper bound of percent value
strict — if percent < minPercent OR percent > maxPercent and strict mode is on then filter compilation should fail, otherwise original rules must be used

In other words, percent is the "compression level". For instance, for the Base filter it is configured to 40%. It means that optimization algorithm should strip 60% of rules.

Eventually, here are the two versions of the Base filter for AdGuard browser extension:

Important: If you want to add a rule which shouldn't be removed at optimization use the NOT_OPTIMIZED hint:

!+ NOT_OPTIMIZED
||example.org^

And this rule won't be optimized only for AdGuard for Android:

!+ NOT_OPTIMIZED PLATFORM(android)
||example.org^

PLATFORM and NOT_PLATFORM hints

Specify which platforms can apply this rule. List of existing platforms:

windows - Example: English filter for Windows - https://filters.adtidy.org/windows/filters/2.txt
mac - Example: English filter for Mac - https://filters.adtidy.org/mac_v2/filters/2.txt
android - Example: English filter for Android - https://filters.adtidy.org/android/filters/2.txt
ios - Example: English filter for iOS - https://filters.adtidy.org/ios/filters/2.txt
ext_chromium - Example: AdGuard browser extension for Chrome - https://filters.adtidy.org/extension/chromium/filters/2.txt
ext_ff - Example: AdGuard browser extension for Firefox - https://filters.adtidy.org/extension/firefox/filters/2.txt
ext_edge - Example: AdGuard browser extension for Edge - https://filters.adtidy.org/extension/edge/filters/2.txt
ext_opera - Example: AdGuard browser extension for Opera - https://filters.adtidy.org/extension/opera/filters/2.txt
ext_ublock - Example: uBlock Origin - https://filters.adtidy.org/extension/ublock/filters/2.txt
ext_safari - Example: AdGuard browser extension for Safari - https://filters.adtidy.org/extension/safari/filters/2.txt
ext_android_cb - Example: AdGuard Content Blocker - https://filters.adtidy.org/extension/android-content-blocker/filters/2.txt

Examples:

This rule will be available for Windows, Mac, and Android only:

!+ PLATFORM(windows,mac,android)
||example.org^

This rule will be available for every platform except Safari extension, iOS, and Android content blocker:

!+ NOT_PLATFORM(ext_safari, ext_android_cb, ios)
||example.org^

How to debug filtering rules

It may be possible to create simple filtering rules "in your head", but for anything even slightly more complicated you'd need additional tools to debug and iterate them. There are tools to assist you with that. You can use DevTools in Chrome and its analogs in other browsers, but most AdGuard products provide another one: Filtering log.

Filtering log

Filtering log is an advanced tool that will be helpful mostly to filter developers. It lists all web requests that pass through AdGuard, gives you exhaustive information on each of them, offers multiple sorting options, and has other useful features.

Depending on which AdGuard product you're using, Filtering log can be located in different places.

In AdGuard for Windows you'll find it inside Ad Blocker tab or via the tray menu;
In AdGuard for Mac it's under Settings > Advanced > Filtering log;
In AdGuard for Android it's a separate item in the side menu, also filtering log for a specific app or website is accessible from the Assistant.
In AdGuard browser extensions it's accessible from the Miscellaneous settings tab or by right-clicking the extension icon. Only Chromium- and Firefox-based browsers show applied element hiding rules (including CSS, ExtCSS) and JS rules and scriptlets in their Filtering logs.

In AdGuard for iOS and in AdGuard for Safari Filtering log does not exist because of the way content blockers are implemented in Safari. AdGuard doesn't see the web requests and therefore can't display them.

Selectors debugging mode

Sometimes, you might need to check the performance of a given selector or a stylesheet. In order to do it without interacting with javascript directly, you can use a special debug style property. When ExtendedCss meets this property, it enables the debug mode either for a single selector or for all selectors, depending on the debug value. Open the browser console while on a web page to see the timing statistics for selector(s) that were applied there. Debugging mode displays the following stats for each of the debugged selectors:

array: time that it took to apply the selector on the page, for each of the instances that it's been applied (in milliseconds) length: total number of times that the selector has been applied on the page mean: mean time that it took to apply the selector on the page stddev: standard deviation squaredSum: sum of squared deviations from the mean sum: total time it took to apply the selector on the page across all instances

Examples

Debugging a single selector

When the value of the debug property is true, only information about this selector will be shown in the browser console.

#$?#.banner { display: none; debug: true; }

Enabling global debug

When the value of the debug property is global, the console will display information about all ExtendedCSS selectors that have matches on the current page, for all ExtendedCSS rules from any of the enabled filters.

#$?#.banner { display: none; debug: global; }

Testing extended selectors without AdGuard

If you don't have AdGuard installed, you can still test extended selectors, but you'll have to load ExtendedCSS to the current page first. To do so, copy and execute the following code in the browser console:

!function(E,x,t,C,s,s_){C=E.createElement(x),s=E.getElementsByTagName(x)[0],C.src=t,
C.onload=function(){alert('ExtCss loaded successfully')},s.parentNode.insertBefore(C,s)}
(document,'script','https://AdguardTeam.github.io/ExtendedCss/extended-css.min.js')

Alternatively, install an "ExtendedCssDebugger" userscript: https://github.com/AdguardTeam/Userscripts/blob/master/extendedCssDebugger/extended-css.debugger.user.js

You can now use the ExtendedCss constructor in the global scope, and its method ExtendedCss.query as document.querySelectorAll.

var selectorText = "div.block[-ext-has='.header:matches-css-after(content: Anzeige)']";

ExtendedCss.query(selectorText) // returns an array of Elements matching selectorText

Debugging scriptlets

If you're using AdGuard browser extension and want to debug a scriptlet rule, you can get additional information by simpy having the Filtering log opened. In that case, scriptlets will switch to debug mode and will write more information to the browser's console.

The following scriptlets may be especially useful for debug purposes:

debug-current-inline-script debug-on-property-read debug-on-property-write log-addEventListener log-eval log

The following scriptlets may be used for debug purposes when applied without any parameters:

requestAnimationFrame prevent-setInterval prevent-setTimeout

Good luck with creating filters!

We wish you luck with creating you own ad filters.

If you need an advice on how to create your own filters properly, our forum has a special section dedicated to writing your own filtering rules.

109 KiB Raw Permalink Blame History

Introduction

Comments

Examples

Example: Blocking by domain name

Example: Blocking exact address

Example: Basic rule modifiers

Example: Unblocking an address

Unblocking everything on a website

Example: Cosmetic rule

Popular CSS selectors

Basic rules

Sub-requests

Response status

Basic rules syntax

Special characters

Regular expressions support

Wildcard support for TLD (top-level domains)

Basic rules examples

Modifiers

Basic modifiers

domain

domain examples

domain and ~ examples

domain modifier matching target domain

third-party

third-party examples

~third-party examples

popup

popupexamples

match-case

match-case examples

Restriction by content type

Content type modifiers examples

image

stylesheet

script

object

object-subrequest

font

media

subdocument

ping

xmlhttprequest

websocket

webrtc

webrtc example

other

Exception modifiers

elemhide

elemhide example

content

content example

jsinject

jsinject example

urlblock

urlblock example

extension

extension example

document

document example

stealth

stealth examples

Generic rules

generichide

genericblock

specifichide

Advanced capabilities

removeparam

Syntax

Basic syntax

Regular expressions

Remove all query parameters

Inversion

Negating $removeparam

Examples

important

Example 1:

Example 2:

Example 3:

109 KiB

Raw Permalink Blame History

`domain`

`domain` examples

`domain` and `~` examples

`domain` modifier matching target domain

`third-party`

`third-party` examples

`~third-party` examples

`popup`

`popup`examples

`match-case`

`match-case` examples

`image`

`stylesheet`

`script`

`object`

`object-subrequest`

`font`

`media`

`subdocument`

`ping`

`xmlhttprequest`

`websocket`

`webrtc`

`webrtc` example

`other`

`elemhide`

`elemhide` example

`content`

`content` example

`jsinject`

`jsinject` example

`urlblock`

`urlblock` example

`extension`

`extension` example

`document`

`document` example

`stealth`

`stealth` examples

`generichide`

`genericblock`

`specifichide`

`removeparam`

Negating `$removeparam`

`important`

`badfilter`

`empty`

`empty` example

`mp4`

`mp4` example

`replace`

`$replace` rules features

`$replace` example

Multiple `$replace` rules example

Disabling `$replace` rules

`csp`

`csp` syntax

`csp` examples

`cookie`

`$cookie` syntax

`network`

`network` examples

`app`

`app` examples

`app` and `~` examples

`redirect`

`redirect` syntax

Disabling `$redirect` rules

`redirect` examples

`redirect-rule`

`denyallow`

`noop`

`noop` examples:

`$removeheader`

Pseudo-class `:has()`

Pseudo-class `:if-not()`

Pseudo-class `:contains()`

Pseudo-class `:matches-css()`

Pseudo-class `:matches-attr()`