commit 3f77f244d8ec28e3a0a81240ffac7d626390060c upstream.
The v21 version of the NAND flash controller contains a Spare Area Size
Register (SPAS) at offset 0x10. Its setting defaults to the maximum
spare area size of 218 bytes. The size that is set in this register is
used by the controller when it calculates the ECC bytes internally in
hardware.
Usually, this register is updated from settings in the IIM fuses when
the system is booting from NAND flash. For other boot media, however,
the SPAS register remains at the default setting, which may not work for
the particular flash chip on the board. The same goes for flash chips
whose configuration cannot be set in the IIM fuses (e.g. chips with 2k
sector size and 128 bytes spare area size can't be configured in the IIM
fuses on imx25 systems).
Set the SPAS register explicitly during the preset operation. Derive the
register value from mtd->oobsize that was detected during probe by
decoding the flash chip's ID bytes.
While at it, rename the define for the spare area register's offset to
NFC_V21_RSLTSPARE_AREA. The register at offset 0x10 on v1 controllers is
different from the register on v21 controllers.
Fixes: d484018 ("mtd: mxc_nand: set NFC registers after reset")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ee9bc12342cf546313d300808ff47d7dbb8e7db upstream.
The cx25840 driver currently configures 885, 887, and 888 using
default divisors for each chip. This check to see if the cx23885
driver has passed the cx25840 a non-default clock rate for a
specific chip. If a cx23885 board has left clk_freq at 0, the
clock default values will be used to configure the PLLs.
This patch only has effect on 888 boards who set clk_freq to 25M.
Signed-off-by: Brad Love <brad@nextdimension.cc>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9564a8cf422d7b58f6e857e3546d346fa970191e upstream.
I tried building using a freshly built Make (4.2.1-69-g8a731d1), but
already the objtool build broke with
orc_dump.c: In function ‘orc_dump’:
orc_dump.c:106:2: error: ‘elf_getshnum’ is deprecated [-Werror=deprecated-declarations]
if (elf_getshdrnum(elf, &nr_sections)) {
Turns out that with that new Make, the backslash was not removed, so cpp
didn't see a #include directive, grep found nothing, and
-DLIBELF_USE_DEPRECATED was wrongly put in CFLAGS.
Now, that new Make behaviour is documented in their NEWS file:
* WARNING: Backward-incompatibility!
Number signs (#) appearing inside a macro reference or function invocation
no longer introduce comments and should not be escaped with backslashes:
thus a call such as:
foo := $(shell echo '#')
is legal. Previously the number sign needed to be escaped, for example:
foo := $(shell echo '\#')
Now this latter will resolve to "\#". If you want to write makefiles
portable to both versions, assign the number sign to a variable:
C := \#
foo := $(shell echo '$C')
This was claimed to be fixed in 3.81, but wasn't, for some reason.
To detect this change search for 'nocomment' in the .FEATURES variable.
This also fixes up the two make-cmd instances to replace # with $(pound)
rather than with \#. There might very well be other places that need
similar fixup in preparation for whatever future Make release contains
the above change, but at least this builds an x86_64 defconfig with the
new make.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197847
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 5bbb99d2fde047df596379be6c58e265e2ddbe1f which is
commit 88075256ee817041d68c2387f29065b5cb2b342a upstream.
Jiri writes that this was an incorrect fix, and Madalin-cristian says it
was fixed differently in a later patch. So just revert this from
4.14.y.
Reported-by: Jiri Slaby <jslaby@suse.cz>
Cc: Madalin Bucur <madalin.bucur@nxp.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc7a10ddee0c56c6d891dd18de5c4ee9869545e0 upstream.
If write is failed, we must deallocate the blocks that we couldn't write.
Cc: stable@vger.kernel.org
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 03703ed1debf777ea845aa9b50ba2e80a5e7dd3c upstream.
If buffers were prepared or queued and the buffers were released without
starting the queue, the finish mem op (corresponding to the prepare mem
op) was never called to the buffers.
Before commit a136f59c0a1f there was no need to do this as in such a case
the prepare mem op had not been called yet. Address the problem by
explicitly calling finish mem op when the queue is stopped if the buffer
is in either prepared or queued state.
Fixes: a136f59c0a1f ("[media] vb2: Move buffer cache synchronisation to prepare from queue")
Cc: stable@vger.kernel.org # for v4.13 and up
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31286a8484a85e8b4e91ddb0f5415aee8a416827 upstream.
Recently the following BUG was reported:
Injecting memory failure for pfn 0x3c0000 at process virtual address 0x7fe300000000
Memory failure: 0x3c0000: recovery action for huge page: Recovered
BUG: unable to handle kernel paging request at ffff8dfcc0003000
IP: gup_pgd_range+0x1f0/0xc20
PGD 17ae72067 P4D 17ae72067 PUD 0
Oops: 0000 [#1] SMP PTI
...
CPU: 3 PID: 5467 Comm: hugetlb_1gb Not tainted 4.15.0-rc8-mm1-abc+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-1.fc25 04/01/2014
You can easily reproduce this by calling madvise(MADV_HWPOISON) twice on
a 1GB hugepage. This happens because get_user_pages_fast() is not aware
of a migration entry on pud that was created in the 1st madvise() event.
I think that conversion to pud-aligned migration entry is working, but
other MM code walking over page table isn't prepared for it. We need
some time and effort to make all this work properly, so this patch
avoids the reported bug by just disabling error handling for 1GB
hugepage.
[n-horiguchi@ah.jp.nec.com: v2]
Link: http://lkml.kernel.org/r/1517284444-18149-1-git-send-email-n-horiguchi@ah.jp.nec.com
Link: http://lkml.kernel.org/r/1517207283-15769-1-git-send-email-n-horiguchi@ah.jp.nec.com
Signed-off-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Punit Agrawal <punit.agrawal@arm.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 10d94ff4d558b96bfc4f55bb0051ae4d938246fe upstream.
When the irqaffinity= kernel parameter is passed in a CPUMASK_OFFSTACK=y
kernel, it fails to boot, because zalloc_cpumask_var() cannot be used before
initializing the slab allocator to allocate a cpumask.
So, use alloc_bootmem_cpumask_var() instead.
Also do some cleanups while at it: in init_irq_default_affinity() remove
an #ifdef via using cpumask_available().
Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171026045800.27087-1-rakib.mullick@gmail.com
Link: http://lkml.kernel.org/r/20171101041451.12581-1-rakib.mullick@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Janne Huttunen <janne.huttunen@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 717adfdaf14704fd3ec7fa2c04520c0723247eac upstream.
If our length is greater than the size of the buffer, we
overflow the buffer
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Rosenberg <drosen@google.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f65245f2d178b9cba48350620d76faa4a098841 upstream.
uref->field_index, uref->usage_index, finfo.field_index and cinfo.index can be
indirectly controlled by user-space, hence leading to a potential exploitation
of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
drivers/hid/usbhid/hiddev.c:473 hiddev_ioctl_usage() warn: potential spectre issue 'report->field' (local cap)
drivers/hid/usbhid/hiddev.c:477 hiddev_ioctl_usage() warn: potential spectre issue 'field->usage' (local cap)
drivers/hid/usbhid/hiddev.c:757 hiddev_ioctl() warn: potential spectre issue 'report->field' (local cap)
drivers/hid/usbhid/hiddev.c:801 hiddev_ioctl() warn: potential spectre issue 'hid->collection' (local cap)
Fix this by sanitizing such structure fields before using them to index
report->field, field->usage and hid->collection
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef6eaf27274c0351f7059163918f3795da13199c upstream.
Commit ac75a041048b ("HID: i2c-hid: fix size check and type usage") started
writing messages when the ret_size is <= 2 from i2c_master_recv. However, my
device i2c-DLL07D1 returns 2 for a short period of time (~0.5s) after I stop
moving the pointing stick or touchpad. It varies, but you get ~50 messages
each time which spams the log hard.
[ 95.925055] i2c_hid i2c-DLL07D1:01: i2c_hid_get_input: incomplete report (83/2)
This has also been observed with a i2c-ALP0017.
[ 1781.266353] i2c_hid i2c-ALP0017:00: i2c_hid_get_input: incomplete report (30/2)
Only print the message when ret_size is totally invalid and less than 2 to cut
down on the log spam.
Fixes: ac75a041048b ("HID: i2c-hid: fix size check and type usage")
Reported-by: John Smith <john-s-84@gmx.net>
Cc: stable@vger.kernel.org
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d5ce4c31d6df518dd8f63bbae20d7423c5018a6c upstream.
sd_config_write_same() ignores ->max_ws_blocks == 0 and resets it to
permit trying WRITE SAME on older SCSI devices, unless ->no_write_same
is set. Because REQ_OP_WRITE_ZEROES is implemented in terms of WRITE
SAME, blkdev_issue_zeroout() may fail with -EREMOTEIO:
$ fallocate -zn -l 1k /dev/sdg
fallocate: fallocate failed: Remote I/O error
$ fallocate -zn -l 1k /dev/sdg # OK
$ fallocate -zn -l 1k /dev/sdg # OK
The following calls succeed because sd_done() sets ->no_write_same in
response to a sense that would become BLK_STS_TARGET/-EREMOTEIO, causing
__blkdev_issue_zeroout() to fall back to generating ZERO_PAGE bios.
This means blkdev_issue_zeroout() must cope with WRITE ZEROES failing
and fall back to manually zeroing, unless BLKDEV_ZERO_NOFALLBACK is
specified. For BLKDEV_ZERO_NOFALLBACK case, return -EOPNOTSUPP if
sd_done() has just set ->no_write_same thus indicating lack of offload
support.
Fixes: c20cfc27a473 ("block: stop using blkdev_issue_write_same for zeroing")
Cc: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Janne Huttunen <janne.huttunen@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 425a4dba7953e35ffd096771973add6d2f40d2ed upstream.
blkdev_issue_zeroout() will use this in !BLKDEV_ZERO_NOFALLBACK case.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Janne Huttunen <janne.huttunen@nokia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a17712c8e4be4fa5404d20e9cd3b2b21eae7bc56 upstream.
This patch attempts to close a hole leading to a BUG seen with hot
removals during writes [1].
A block device (NVME namespace in this test case) is formatted to EXT4
without partitions. It's mounted and write I/O is run to a file, then
the device is hot removed from the slot. The superblock attempts to be
written to the drive which is no longer present.
The typical chain of events leading to the BUG:
ext4_commit_super()
__sync_dirty_buffer()
submit_bh()
submit_bh_wbc()
BUG_ON(!buffer_mapped(bh));
This fix checks for the superblock's buffer head being mapped prior to
syncing.
[1] https://www.spinics.net/lists/linux-ext4/msg56527.html
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bfe0a5f47ada40d7984de67e59a7d3390b9b9ecc upstream.
The kernel's ext4 mount-time checks were more permissive than
e2fsprogs's libext2fs checks when opening a file system. The
superblock is considered too insane for debugfs or e2fsck to operate
on it, the kernel has no business trying to mount it.
This will make file system fuzzing tools work harder, but the failure
cases that they find will be more useful and be easier to evaluate.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c37e9e013469521d9adb932d17a1795c139b36db upstream.
If there is a directory entry pointing to a system inode (such as a
journal inode), complain and declare the file system to be corrupted.
Also, if the superblock's first inode number field is too small,
refuse to mount the file system.
This addresses CVE-2018-10882.
https://bugzilla.kernel.org/show_bug.cgi?id=200069
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8bc1379b82b8e809eef77a9fedbb75c6c297be19 upstream.
Use a separate journal transaction if it turns out that we need to
convert an inline file to use an data block. Otherwise we could end
up failing due to not having journal credits.
This addresses CVE-2018-10883.
https://bugzilla.kernel.org/show_bug.cgi?id=200071
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8cdb5240ec5928b20490a2bb34cb87e9a5f40226 upstream.
When expanding the extra isize space, we must never move the
system.data xattr out of the inode body. For performance reasons, it
doesn't make any sense, and the inline data implementation assumes
that system.data xattr is never in the external xattr block.
This addresses CVE-2018-10880
https://bugzilla.kernel.org/show_bug.cgi?id=200005
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e8ab72a812396996035a37e5ca4b3b99b5d214b upstream.
When converting from an inode from storing the data in-line to a data
block, ext4_destroy_inline_data_nolock() was only clearing the on-disk
copy of the i_blocks[] array. It was not clearing copy of the
i_blocks[] in ext4_inode_info, in i_data[], which is the copy actually
used by ext4_map_blocks().
This didn't matter much if we are using extents, since the extents
header would be invalid and thus the extents could would re-initialize
the extents tree. But if we are using indirect blocks, the previous
contents of the i_blocks array will be treated as block numbers, with
potentially catastrophic results to the file system integrity and/or
user data.
This gets worse if the file system is using a 1k block size and
s_first_data is zero, but even without this, the file system can get
quite badly corrupted.
This addresses CVE-2018-10881.
https://bugzilla.kernel.org/show_bug.cgi?id=200015
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc890a60247171294acc0bd67d211fa4b88d40ba upstream.
If there is a corupted file system where the claimed depth of the
extent tree is -1, this can cause a massive buffer overrun leading to
sadness.
This addresses CVE-2018-10877.
https://bugzilla.kernel.org/show_bug.cgi?id=199417
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8844618d8aa7a9973e7b527d038a2a589665002c upstream.
The bg_flags field in the block group descripts is only valid if the
uninit_bg or metadata_csum feature is enabled. We were not
consistently looking at this field; fix this.
Also block group #0 must never have uninitialized allocation bitmaps,
or need to be zeroed, since that's where the root inode, and other
special inodes are set up. Check for these conditions and mark the
file system as corrupted if they are detected.
This addresses CVE-2018-10876.
https://bugzilla.kernel.org/show_bug.cgi?id=199403
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 819b23f1c501b17b9694325471789e6b5cc2d0d2 upstream.
Regardless of whether the flex_bg feature is set, we should always
check to make sure the bits we are setting in the block bitmap are
within the block group bounds.
https://bugzilla.kernel.org/show_bug.cgi?id=199865
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 77260807d1170a8cf35dbb06e07461a655f67eee upstream.
It's really bad when the allocation bitmaps and the inode table
overlap with the block group descriptors, since it causes random
corruption of the bg descriptors. So we really want to head those off
at the pass.
https://bugzilla.kernel.org/show_bug.cgi?id=199865
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 513f86d73855ce556ea9522b6bfd79f87356dc3a upstream.
If there an inode points to a block which is also some other type of
metadata block (such as a block allocation bitmap), the
buffer_verified flag can be set when it was validated as that other
metadata block type; however, it would make a really terrible external
attribute block. The reason why we use the verified flag is to avoid
constantly reverifying the block. However, it doesn't take much
overhead to make sure the magic number of the xattr block is correct,
and this will avoid potential crashes.
This addresses CVE-2018-10879.
https://bugzilla.kernel.org/show_bug.cgi?id=200001
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5369a762c882c0b6e9599e4ebbb3a9ba9eee7e2d upstream.
In theory this should have been caught earlier when the xattr list was
verified, but in case it got missed, it's simple enough to add check
to make sure we don't overrun the xattr buffer.
This addresses CVE-2018-10879.
https://bugzilla.kernel.org/show_bug.cgi?id=200001
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e09463f220ca9a1a1ecfda84fcda658f99a1f12a upstream.
Do not set the b_modified flag in block's journal head should not
until after we're sure that jbd2_journal_dirty_metadat() will not
abort with an error due to there not being enough space reserved in
the jbd2 handle.
Otherwise, future attempts to modify the buffer may lead a large
number of spurious errors and warnings.
This addresses CVE-2018-10883.
https://bugzilla.kernel.org/show_bug.cgi?id=200071
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 99ec9e77511dea55d81729fc80b6c63a61bfa8e0 upstream.
The displaylink hardware has such a peculiarity that it doesn't render a
command until next command is received. This produces occasional
corruption, such as when setting 22x11 font on the console, only the first
line of the cursor will be blinking if the cursor is located at some
specific columns.
When we end up with a repeating pixel, the driver has a bug that it leaves
one uninitialized byte after the command (and this byte is enough to flush
the command and render it - thus it fixes the screen corruption), however
whe we end up with a non-repeating pixel, there is no byte appended and
this results in temporary screen corruption.
This patch fixes the screen corruption by always appending a byte 0xAF at
the end of URB. It also removes the uninitialized byte.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 718b5406cd76f1aa6434311241b7febf0e8571ff upstream.
The property size may be controlled by userspace, can be large (I've
seen failure with order 4, i.e. 16 pages / 64 KB) and doesn't need to be
physically contiguous.
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180629142710.2069-1-michel@daenzer.net
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7ffbe65578b44fafdef577a360eb0583929f7c6e upstream.
For every request we send, whether it is SMB1 or SMB2+, we attempt to
reconnect tcon (cifs_reconnect_tcon or smb2_reconnect) before carrying
out the request.
So, while server->tcpStatus != CifsNeedReconnect, we wait for the
reconnection to succeed on wait_event_interruptible_timeout(). If it
returns, that means that either the condition was evaluated to true, or
timeout elapsed, or it was interrupted by a signal.
Since we're not handling the case where the process woke up due to a
received signal (-ERESTARTSYS), the next call to
wait_event_interruptible_timeout() will _always_ fail and we end up
looping forever inside either cifs_reconnect_tcon() or smb2_reconnect().
Here's an example of how to trigger that:
$ mount.cifs //foo/share /mnt/test -o
username=foo,password=foo,vers=1.0,hard
(break connection to server before executing bellow cmd)
$ stat -f /mnt/test & sleep 140
[1] 2511
$ ps -aux -q 2511
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 2511 0.0 0.0 12892 1008 pts/0 S 12:24 0:00 stat -f
/mnt/test
$ kill -9 2511
(wait for a while; process is stuck in the kernel)
$ ps -aux -q 2511
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
root 2511 83.2 0.0 12892 1008 pts/0 R 12:24 30:01 stat -f
/mnt/test
By using 'hard' mount point means that cifs.ko will keep retrying
indefinitely, however we must allow the process to be killed otherwise
it would hang the system.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Cc: stable@vger.kernel.org
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6aa0c114eceec8cc61715f74a4ce91b048d7561c upstream.
This patch fixes a memory leak when doing a setxattr(2) in SMB2+.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 696e420bb2a6624478105651d5368d45b502b324 upstream.
With protocol version 2.0 mounts we have seen crashes with corrupt mid
entries. Either the server->pending_mid_q list becomes corrupt with a
cyclic reference in one element or a mid object fetched by the
demultiplexer thread becomes overwritten during use.
Code review identified a race between the demultiplexer thread and the
request issuing thread. The demultiplexer thread seems to be written
with the assumption that it is the sole user of the mid object until
it calls the mid callback which either wakes the issuer task or
deletes the mid.
This assumption is not true because the issuer task can be woken up
earlier by a signal. If the demultiplexer thread has proceeded as far
as setting the mid_state to MID_RESPONSE_RECEIVED then the issuer
thread will happily end up calling cifs_delete_mid while the
demultiplexer thread still is using the mid object.
Inserting a delay in the cifs demultiplexer thread widens the race
window and makes reproduction of the race very easy:
if (server->large_buf)
buf = server->bigbuf;
+ usleep_range(500, 4000);
server->lstrp = jiffies;
To resolve this I think the proper solution involves putting a
reference count on the mid object. This patch makes sure that the
demultiplexer thread holds a reference until it has finished
processing the transaction.
Cc: stable@vger.kernel.org
Signed-off-by: Lars Persson <larper@axis.com>
Acked-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bb94b55af3461e26b32f0e23d455abeae0cfca5d upstream.
The patch noted in the fixes below converted get_user_pages_fast() to
get_user_pages_longterm(), however the two calls differ in a few ways.
First _fast() is documented to not require the mmap_sem, while _longterm()
is documented to need it. Hold the mmap sem as required.
Second, _fast accepts an 'int write' while _longterm uses 'unsigned int
gup_flags', so the expression '!!(prot & IOMMU_WRITE)' is only working by
luck as FOLL_WRITE is currently == 0x1. Use the expected FOLL_WRITE
constant instead.
Fixes: 94db151dc892 ("vfio: disable filesystem-dax page pinning")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 64dafbc9530c10300acffc57fae3269d95fa8f93 upstream.
We have
struct drbd_requests { ... struct bio *private_bio; ... }
to hold a bio clone for local submission.
On local IO completion, we put that bio, and in case we want to use the
result later, we overload that member to hold the ERR_PTR() of the
completion result,
Which, before v4.3, used to be the passed in "int error",
so we could first bio_put(), then assign.
v4.3-rc1~100^2~21 4246a0b63bd8 block: add a bi_error field to struct bio
changed that:
bio_put(req->private_bio);
- req->private_bio = ERR_PTR(error);
+ req->private_bio = ERR_PTR(bio->bi_error);
Which introduces an access after free,
because it was non obvious that req->private_bio == bio.
Impact of that was mostly unnoticable, because we only use that value
in a multiple-failure case, and even then map any "unexpected" error
code to EIO, so worst case we could potentially mask a more specific
error with EIO in a multiple failure case.
Unless the pointed to memory region was unmapped, as is the case with
CONFIG_DEBUG_PAGEALLOC, in which case this results in
BUG: unable to handle kernel paging request
v4.13-rc1~70^2~75 4e4cbee93d56 block: switch bios to blk_status_t
changes it further to
bio_put(req->private_bio);
req->private_bio = ERR_PTR(blk_status_to_errno(bio->bi_status));
And blk_status_to_errno() now contains a WARN_ON_ONCE() for unexpected
values, which catches this "sometimes", if the memory has been reused
quickly enough for other things.
Should also go into stable since 4.3, with the trivial change around 4.13.
Cc: stable@vger.kernel.org
Fixes: 4246a0b63bd8 block: add a bi_error field to struct bio
Reported-by: Sarah Newman <srn@prgmr.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 891f6a726cacbb87e5b06076693ffab53bd378d7 upstream.
In the critical section cleanup we must not mess with r1. For march=z9
or older, larl + ex (instead of exrl) are used with r1 as a temporary
register. This can clobber r1 in several interrupt handlers. Fix this by
using r11 as a temp register. r11 is being saved by all callers of
cleanup_critical.
Fixes: 6dd85fbb87 ("s390: move expoline assembler macros to a header")
Cc: stable@vger.kernel.org #v4.16
Reported-by: Oliver Kurz <okurz@suse.com>
Reported-by: Petr Tesařík <ptesarik@suse.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 63ce3c384db26494615e3c8972bcd419ed71f4c4 upstream.
SPC5r17 states that the contents of the ADDITIONAL LENGTH field are not
altered based on the allocation length, so always calculate and pack the
full key list length even if the list itself is truncated.
According to Maged:
Yes it fixes the "Storage Spaces Persistent Reservation" test in the
Windows 2016 Server Failover Cluster validation suites when having
many connections that result in more than 8 registrations. I tested
your patch on 4.17 with iblock.
This behaviour can be tested using the libiscsi PrinReadKeys.Truncate test.
Cc: stable@vger.kernel.org
Signed-off-by: David Disseldorp <ddiss@suse.de>
Reviewed-by: Mike Christie <mchristi@redhat.com>
Tested-by: Maged Mokhtar <mmokhtar@petasan.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26b5b874aff5659a7e26e5b1997e3df2c41fa7fd upstream.
As Al Viro noted in commit 128394eff343 ("sg_write()/bsg_write() is not fit
to be called under KERNEL_DS"), sg improperly accesses userspace memory
outside the provided buffer, permitting kernel memory corruption via
splice(). But it doesn't just do it on ->write(), also on ->read().
As a band-aid, make sure that the ->read() and ->write() handlers can not
be called in weird contexts (kernel context or credentials different from
file opener), like for ib_safe_file_access().
If someone needs to use these interfaces from different security contexts,
a new interface should be written that goes through the ->ioctl() handler.
I've mostly copypasted ib_safe_file_access() over as sg_safe_file_access()
because I couldn't find a good common header - please tell me if you know a
better way.
[mkp: s/_safe_/_check_/]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jann Horn <jannh@google.com>
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 520495fe96d74e05db585fc748351e0504d8f40d upstream.
When booting with very large numbers of gigantic (i.e. 1G) pages, the
operations in the loop of gather_bootmem_prealloc, and specifically
prep_compound_gigantic_page, takes a very long time, and can cause a
softlockup if enough pages are requested at boot.
For example booting with 3844 1G pages requires prepping
(set_compound_head, init the count) over 1 billion 4K tail pages, which
takes considerable time.
Add a cond_resched() to the outer loop in gather_bootmem_prealloc() to
prevent this lockup.
Tested: Booted with softlockup_panic=1 hugepagesz=1G hugepages=3844 and
no softlockup is reported, and the hugepages are reported as
successfully setup.
Link: http://lkml.kernel.org/r/20180627214447.260804-1-cannonmatthews@google.com
Signed-off-by: Cannon Matthews <cannonmatthews@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1e2c043628c7736dd56536d16c0ce009bc834ae7 upstream.
Use huge_ptep_get() to translate huge ptes to normal ptes so we can
check them with the huge_pte_* functions. Otherwise some architectures
will check the wrong values and will not wait for userspace to bring in
the memory.
Link: http://lkml.kernel.org/r/20180626132421.78084-1-frankja@linux.ibm.com
Fixes: 369cd2121be4 ("userfaultfd: hugetlbfs: userfaultfd_huge_must_wait for hugepmd ranges")
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a95691bc54af1ac4b12c354f91e9cabf1cb068df ]
This patch adds support for the BCM5389 switch connected through MDIO.
Signed-off-by: Damien Thébault <damien.thebault@vitec.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 26de0b76d9ba3200f09c6cb9d9618bda338be5f7 ]
With CONFIG_DMA_API_DEBUG=y, calling sonic_open() produces the
message, "DMA-API: device driver failed to check map error".
Add the missing dma_mapping_error() call.
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7af443ee1697607541c6346c87385adab2214743 ]
select_task_rq() is used in a few paths to select the CPU upon which a
thread should be run - for example it is used by try_to_wake_up() & by
fork or exec balancing. As-is it allows use of any online CPU that is
present in the task's cpus_allowed mask.
This presents a problem because there is a period whilst CPUs are
brought online where a CPU is marked online, but is not yet fully
initialized - ie. the period where CPUHP_AP_ONLINE_IDLE <= state <
CPUHP_ONLINE. Usually we don't run any user tasks during this window,
but there are corner cases where this can happen. An example observed
is:
- Some user task A, running on CPU X, forks to create task B.
- sched_fork() calls __set_task_cpu() with cpu=X, setting task B's
task_struct::cpu field to X.
- CPU X is offlined.
- Task A, currently somewhere between the __set_task_cpu() in
copy_process() and the call to wake_up_new_task(), is migrated to
CPU Y by migrate_tasks() when CPU X is offlined.
- CPU X is onlined, but still in the CPUHP_AP_ONLINE_IDLE state. The
scheduler is now active on CPU X, but there are no user tasks on
the runqueue.
- Task A runs on CPU Y & reaches wake_up_new_task(). This calls
select_task_rq() with cpu=X, taken from task B's task_struct,
and select_task_rq() allows CPU X to be returned.
- Task A enqueues task B on CPU X's runqueue, via activate_task() &
enqueue_task().
- CPU X now has a user task on its runqueue before it has reached the
CPUHP_ONLINE state.
In most cases, the user tasks that schedule on the newly onlined CPU
have no idea that anything went wrong, but one case observed to be
problematic is if the task goes on to invoke the sched_setaffinity
syscall. The newly onlined CPU reaches the CPUHP_AP_ONLINE_IDLE state
before the CPU that brought it online calls stop_machine_unpark(). This
means that for a portion of the window of time between
CPUHP_AP_ONLINE_IDLE & CPUHP_ONLINE the newly onlined CPU's struct
cpu_stopper has its enabled field set to false. If a user thread is
executed on the CPU during this window and it invokes sched_setaffinity
with a CPU mask that does not include the CPU it's running on, then when
__set_cpus_allowed_ptr() calls stop_one_cpu() intending to invoke
migration_cpu_stop() and perform the actual migration away from the CPU
it will simply return -ENOENT rather than calling migration_cpu_stop().
We then return from the sched_setaffinity syscall back to the user task
that is now running on a CPU which it just asked not to run on, and
which is not present in its cpus_allowed mask.
This patch resolves the problem by having select_task_rq() enforce that
user tasks run on CPUs that are active - the same requirement that
select_fallback_rq() already enforces. This should ensure that newly
onlined CPUs reach the CPUHP_AP_ACTIVE state before being able to
schedule user tasks, and also implies that bringup_wait_for_ap() will
have called stop_machine_unpark() which resolves the sched_setaffinity
issue above.
I haven't yet investigated them, but it may be of interest to review
whether any of the actions performed by hotplug states between
CPUHP_AP_ONLINE_IDLE & CPUHP_AP_ACTIVE could have similar unintended
effects on user tasks that might schedule before they are reached, which
might widen the scope of the problem from just affecting the behaviour
of sched_setaffinity.
Signed-off-by: Paul Burton <paul.burton@mips.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180526154648.11635-2-paul.burton@mips.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 175f0e25abeaa2218d431141ce19cf1de70fa82d ]
As already enforced by the WARN() in __set_cpus_allowed_ptr(), the rules
for running on an online && !active CPU are stricter than just being a
kthread, you need to be a per-cpu kthread.
If you're not strictly per-CPU, you have better CPUs to run on and
don't need the partially booted one to get your work done.
The exception is to allow smpboot threads to bootstrap the CPU itself
and get kernel 'services' initialized before we allow userspace on it.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 955dbdf4ce87 ("sched: Allow migrating kthreads into online but inactive CPUs")
Link: http://lkml.kernel.org/r/20170725165821.cejhb7v2s3kecems@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 829bc787c1a0403e4d886296dd4d90c5f9c1744a ]
In inode_init_always(), we clear the inode mapping flags, which clears
any retained error (AS_EIO, AS_ENOSPC) bits. Unfortunately, we do not
also clear wb_err, which means that old mapping errors can leak through
to new inodes.
This is crucial for the XFS inode allocation path because we recycle old
in-core inodes and we do not want error state from an old file to leak
into the new file. This bug was discovered by running generic/036 and
generic/047 in a loop and noticing that the EIOs generated by the
collision of direct and buffered writes in generic/036 would survive the
remount between 036 and 047, and get reported to the fsyncs (on
different files!) in generic/047.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d121109100bda84bbbb199dab97f9d56432ab235 ]
The "perf test Session topology" entry fails with core dump on s390. The root
cause is a NULL pointer dereference in function check_cpu_topology() line 76
(or line 82 without -v).
The session->header.env.cpu variable is NULL because on s390 function
process_cpu_topology() returns with error:
socket_id number is too big.
You may need to upgrade the perf tool.
and releases the env.cpu variable via zfree() and sets it to NULL.
Here is the gdb output:
(gdb) n
76 pr_debug("CPU %d, core %d, socket %d\n", i,
(gdb) n
Program received signal SIGSEGV, Segmentation fault.
0x00000000010f4d9e in check_cpu_topology (path=0x3ffffffd6c8
"/tmp/perf-test-J6CHMa", map=0x14a1740) at tests/topology.c:76
76 pr_debug("CPU %d, core %d, socket %d\n", i,
(gdb)
Make sure the env.cpu variable is not used when its NULL.
Test for NULL pointer and return TEST_SKIP if so.
Output before:
[root@p23lp27 perf]# ./perf test -F 39
39: Session topology :Segmentation fault (core dumped)
[root@p23lp27 perf]#
Output after:
[root@p23lp27 perf]# ./perf test -vF 39
39: Session topology :
--- start ---
templ file: /tmp/perf-test-Ajx59D
socket_id number is too big.You may need to upgrade the perf tool.
---- end ----
Session topology: Skip
[root@p23lp27 perf]#
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180528073657.11743-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
