[ Upstream commit ae2cd7fb478b8da707906ee1706ae1379968a8f9 ]
As per listxattr(2):
On success, a nonnegative number is returned indicating the size
of the extended attribute name list. On failure, -1 is returned
and errno is set appropriately.
In SMB1, when the server returns an empty EA list through a listxattr(),
it will correctly return 0 as there are no EAs for the given file.
However, in SMB2+, it returns -ENODATA in listxattr() which is wrong since
the request and response were sent successfully, although there's no actual
EA for the given file.
This patch fixes listxattr() for SMB2+ by returning 0 in cifs_listxattr()
when the server returns an empty list of EAs.
Signed-off-by: Paulo Alcantara <palcantara@suse.de>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1b06bd8dd95f7a19ab33fdf0f477c94950822ab3 ]
This patch adds the MIDR encodings for NVIDIA as well as
the Denver and Carmel CPUs used in Tegra SoCs.
Signed-off-by: David Gilhooley <dgilhooley@nvidia.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 71c23a821c6bcacba71a094efe49ee689605906b ]
bus-off is usually caused by hardware malfunction or configuration error
(baud rate mismatch) and causes a complete loss of communication.
Increase the "bus-off" message's severity from netdev_dbg() to
netdev_info() to make it visible to the user.
A can interface going into bus-off is similar in severity to ethernet's
"Link is Down" message, which is also printed at info level.
It is debatable whether the the "restarted" message should also be
changed to netdev_info() to make the interface state changes
comprehensible from the kernel log. I have chosen to keep the
"restarted" message at dbg for now as the "bus-off" message should be
enough for the user to notice and investigate the problem.
Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Cc: linux-can@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8c61ab7f111a2b29d051348b9cb9a39804ebf1f8 ]
In particular, not reporting SG forced skbs to be linear for vlan
interfaces over atlantic NIC.
With this fix it is possible to enable SG feature on device and
therefore optimize performance.
Reported-by: Ma Yuying <yuma@redhat.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d1ecfa9d1f402366b1776fbf84e635678a51414f ]
This patch fixes crashes during boot for HVM guests on older (pre HVM
vector callback) Xen versions. Without this, current kernels will always
fail to boot on those Xen versions.
Sample stack trace:
BUG: unable to handle kernel paging request at ffffffffff200000
IP: __xen_evtchn_do_upcall+0x1e/0x80
PGD 1e0e067 P4D 1e0e067 PUD 1e10067 PMD 235c067 PTE 0
Oops: 0002 [#1] SMP PTI
Modules linked in:
CPU: 0 PID: 512 Comm: kworker/u2:0 Not tainted 4.14.33-52.13.amzn1.x86_64 #1
Hardware name: Xen HVM domU, BIOS 3.4.3.amazon 11/11/2016
task: ffff88002531d700 task.stack: ffffc90000480000
RIP: 0010:__xen_evtchn_do_upcall+0x1e/0x80
RSP: 0000:ffff880025403ef0 EFLAGS: 00010046
RAX: ffffffff813cc760 RBX: ffffffffff200000 RCX: ffffc90000483ef0
RDX: ffff880020540a00 RSI: ffff880023c78000 RDI: 000000000000001c
RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff880025403f5c R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff880025400000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffffffff200000 CR3: 0000000001e0a000 CR4: 00000000000006f0
Call Trace:
<IRQ>
do_hvm_evtchn_intr+0xa/0x10
__handle_irq_event_percpu+0x43/0x1a0
handle_irq_event_percpu+0x20/0x50
handle_irq_event+0x39/0x60
handle_fasteoi_irq+0x80/0x140
handle_irq+0xaf/0x120
do_IRQ+0x41/0xd0
common_interrupt+0x7d/0x7d
</IRQ>
During boot, the HYPERVISOR_shared_info page gets remapped to make it work
with KASLR. This means that any pointer derived from it needs to be
adjusted.
The only value that this applies to is the vcpu_info pointer for VCPU 0.
For PV and HVM with the callback vector feature, this gets done via the
smp_ops prepare_boot_cpu callback. Older Xen versions do not support the
HVM callback vector, so there is no Xen-specific smp_ops set up in that
scenario. So, the vcpu_info pointer for VCPU 0 never gets set to the proper
value, and the first reference of it will be bad. Fix this by resetting it
immediately after the remap.
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Reviewed-by: Eduardo Valentin <eduval@amazon.com>
Reviewed-by: Alakesh Haloi <alakeshh@amazon.com>
Reviewed-by: Vallish Vaidyeshwara <vallish@amazon.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: xen-devel@lists.xenproject.org
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 914eac248d876f9c00cd1792ffec3d182c863f13 ]
2016 spec, section 10.24.2 specifies that the block ack
timeout in the ADD BA request is advisory.
That means we should check the value in the response and
act upon it (same as buffer size).
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 675c7215aacf54242b2e8bc64bab698abbe764db ]
As per ARM documentation
PPI(0) ID27 - global timer interrupt is rising-edge sensitive.
set IRQ triggering type to IRQ_TYPE_EDGE_RISING for ARM Global timers.
Fixes: c9ad7bc5fe3 ("ARM: dts: Enable Broadcom Cygnus SoC")
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0d74d872c3f8b9cb3d096fb932a063b43b37f188 ]
__printf is useful to verify format and arguments. Remove the following
warning (with W=1):
drivers/ata/libata-eh.c:183:10: warning: function might be possible candidate for ‘gnu_printf’ format attribute [-Wsuggest-attribute=format]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4d6cb5e2fee52af17001e92950f0894304706ee4 ]
soc_device_match() can return NULL, so add a check and fail if
soc_device_match() fails.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180502091159.7071-2-tomi.valkeinen@ti.com
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6a0f0c55619f0b82a677cab72e77c3444a5eee58 ]
tiler_reserve_2d allocates memory but does not check if it got the
memory. Add the check and return ENOMEM on failure.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180329104038.29154-2-tomi.valkeinen@ti.com
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 77eeac24b10fc84d3ffd5b11a897dff88dde244d ]
audio_config function for both HDMI4 and HDMI5 return uninitialized
value as the error code if the display is not currently enabled. For
some reason this has not caused any issues.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180329104038.29154-1-tomi.valkeinen@ti.com
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4a9fbfcab19d3f71ad2bf0bcb653c4ee84e69c7f ]
Smatch complains that "area_free" could be used without being
initialized. This code is several years old and premusably works fine
so this can't be a very serious bug. But it's easy enough to silence
the warning. If "area_free" is false at the end of the function then
we return -ENOMEM.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180418142937.GA13828@mwanda
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 407879b690ba3a6bf29be896d02dad63463bd1c0 ]
The IEEE P802.11-REVmd D1.0 specification updated the SAE authentication
timeout to be 2000 milliseconds (see dot11RSNASAERetransPeriod). Update
the SAE timeout setting accordingly.
While at it, reduce some code duplication in the timeout configuration.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ab9d3db5b320a052452b9cd035599ee3c84bbee9 ]
This change prevents userland from referencing TEE shared memory
outside the area initially allocated by its owner. Prior this change an
application could not reference or access memory it did not own but
it could reference memory not explicitly allocated by owner but still
allocated to the owner due to the memory allocation granule.
Reported-by: Alexandre Jutras <alexandre.jutras@nxp.com>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6cb465972c4eb6741b3094a58a65e527fc63c100 ]
The sh asm/smp.h defines a fallback hard_smp_processor_id macro for
the !SMP case, but linux/smp.h never includes asm/smp.h in the !SMP
case.
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b5bf9a90bbebffba888c9144c5a8a10317b04064 ]
Gaurav reported a perceived problem with TASK_PARKED, which turned out
to be a broken wait-loop pattern in __kthread_parkme(), but the
reported issue can (and does) in fact happen for states that do not do
condition based sleeps.
When the 'current->state = TASK_RUNNING' store of a previous
(concurrent) try_to_wake_up() collides with the setting of a 'special'
sleep state, we can loose the sleep state.
Normal condition based wait-loops are immune to this problem, but for
sleep states that are not condition based are subject to this problem.
There already is a fix for TASK_DEAD. Abstract that and also apply it
to TASK_STOPPED and TASK_TRACED, both of which are also without
condition based wait-loop.
Reported-by: Gaurav Kohli <gkohli@codeaurora.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bc519d9574618e47a0c788000fb78da95e18d953 ]
The BCM2835 AUX SPI has a shared interrupt line (with AUX UART).
Downstream fixes this with an AUX irqchip to demux the IRQ sources and a
DT change which breaks compatibility with older kernels. The AUX irqchip
was already rejected for upstream[1] and the DT change would break
working systems if the DTB is updated to a newer one. The latter issue
was brought to my attention by Alex Graf.
The root cause however is a bug in the shared handler. Shared handlers
must check that interrupts are actually enabled before servicing the
interrupt. Add a check that the TXEMPTY or IDLE interrupts are enabled.
[1] https://patchwork.kernel.org/patch/9781221/
Cc: Alexander Graf <agraf@suse.de>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-spi@vger.kernel.org
Cc: linux-rpi-kernel@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9aa169213d1166d30ae357a44abbeae93459339d ]
When commit [1] was added, SGID was queried to derive the SMAC address.
Then, later on during a refactor [2], SMAC was no longer needed. However,
the now useless GID query remained. Then during additional code changes
later on, the GID query was being done in such a way that it caused iWARP
queries to start breaking. Remove the useless GID query and resolve the
iWARP breakage at the same time.
This is discussed in [3].
[1] commit dd5f03beb4f7 ("IB/core: Ethernet L2 attributes in verbs/cm structures")
[2] commit 5c266b2304fb ("IB/cm: Remove the usage of smac and vid of qp_attr and cm_av")
[3] https://www.spinics.net/lists/linux-rdma/msg63951.html
Suggested-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 59482a14918b282ca2a98f38c69da5ebeb1107d2 ]
When IRQ affinity is set and the interrupt type is unknown, a cpu
mask allocated within the function is never freed. Fix this memory
leak by allocating memory within the scope where it is used.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Sebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5da9e742be44d9b7c68b1bf6e1aaf46a1aa7a52b ]
The module parameter num_user_context is defined as 'int' and
defaults to -1. The module_param_named() says that it is uint.
Correct module_param_named() type information and update the modinfo
text to reflect the default value.
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bda27ff5c4526f80a7620a94ecfe8dca153e3696 ]
The sendpage() call grabs the sock lock before calling the default
implementation - which tries to grab it once again.
Signed-off-by: Stefan Raspl <raspl@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com><
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit baf64250b4a513bf4ac226fd938692dc1836f4f6 ]
The deferred_fiq handler used to limit hardware operations to IRQ
unmask only, relying on gpio-omap assigned handler performing the ACKs.
Since commit 80ac93c27441 ("gpio: omap: Fix lost edge interrupts") this
is no longer the case as handle_edge_irq() has been replaced with
handle_simmple_irq() which doesn't touch the hardware.
Add single ACK operation per each active IRQ pin to the handler. While
being at it, move unmask operation out of irq_counter loop so it is
also called only once for each active IRQ pin.
Fixes: 80ac93c27441 ("gpio: omap: Fix lost edge interrupts")
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f31a21103c03bb62846409fdc60cc9faf2398cfb ]
If the command a separate metadata buffer attached, the request needs
to have the integrity flag set so the driver knows to map it.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 59a2f3f00fd744dbad22593f47552037d3154ca6 ]
When specifying same string type option several times,
current option parsing may cause memory leak. Hence,
call kfree for previous one in this case.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9df50ba76ac1485b844beffa1f3f5d9659d9cdaf ]
Need to configure PHY interrupt as active low for P3310 Tegra186
platform otherwise it results in spurious interrupts.
This issue wasn't seen before because the generic PHY driver without
interrupt support was used.
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 741a76b350897604c48fb12beff1c9b77724dc96 ]
Gaurav reported a problem with __kthread_parkme() where a concurrent
try_to_wake_up() could result in competing stores to ->state which,
when the TASK_PARKED store got lost bad things would happen.
The comment near set_current_state() actually mentions this competing
store, but only mentions the case against TASK_RUNNING. This same
store, with different timing, can happen against a subsequent !RUNNING
store.
This normally is not a problem, because as per that same comment, the
!RUNNING state store is inside a condition based wait-loop:
for (;;) {
set_current_state(TASK_UNINTERRUPTIBLE);
if (!need_sleep)
break;
schedule();
}
__set_current_state(TASK_RUNNING);
If we loose the (first) TASK_UNINTERRUPTIBLE store to a previous
(concurrent) wakeup, the schedule() will NO-OP and we'll go around the
loop once more.
The problem here is that the TASK_PARKED store is not inside the
KTHREAD_SHOULD_PARK condition wait-loop.
There is a genuine issue with sleeps that do not have a condition;
this is addressed in a subsequent patch.
Reported-by: Gaurav Kohli <gkohli@codeaurora.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0b26351b910fb8fe6a056f8a1bbccabe50c0e19f ]
Matt reported the following deadlock:
CPU0 CPU1
schedule(.prev=migrate/0) <fault>
pick_next_task() ...
idle_balance() migrate_swap()
active_balance() stop_two_cpus()
spin_lock(stopper0->lock)
spin_lock(stopper1->lock)
ttwu(migrate/0)
smp_cond_load_acquire() -- waits for schedule()
stop_one_cpu(1)
spin_lock(stopper1->lock) -- waits for stopper lock
Fix this deadlock by taking the wakeups out from under stopper->lock.
This allows the active_balance() to queue the stop work and finish the
context switch, which in turn allows the wakeup from migrate_swap() to
observe the context and complete the wakeup.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Galbraith <umgwanakikbuti@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180420095005.GH4064@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b819439fea305a0bfd6ca23a7994fd1a8847c0d8 ]
Fix two section mismatches in drivers.c:
1) Section mismatch in reference from the function alloc_tree_node() to
the function .init.text:create_tree_node().
2) Section mismatch in reference from the function walk_native_bus() to
the function .init.text:alloc_pa_dev().
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3aab8884c9eb99189a3569ac4e6b205371c9ac0b ]
While reviewing x64 JIT code, I noticed that we leak the prior allocated
JIT image in the case where proglen != oldproglen during the JIT passes.
Prior to the commit e0ee9c12157d ("x86: bpf_jit: fix two bugs in eBPF JIT
compiler") we would just break out of the loop, and using the image as the
JITed prog since it could only shrink in size anyway. After e0ee9c12157d,
we would bail out to out_addrs label where we free addrs and jit_data but
not the image coming from bpf_jit_binary_alloc().
Fixes: e0ee9c12157d ("x86: bpf_jit: fix two bugs in eBPF JIT compiler")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f4b024271ae3e9786e5d6f1c05b01b57a74e1d6d ]
The vmw_pvscsi driver returns DID_ABORT for commands aborted internally
by the adapter, leading to the filesystem going read-only. Change the
result to DID_BUS_BUSY, causing the kernel to retry the command.
Signed-off-by: Jim Gill <jgill@vmware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 330e261c35dfb969c48f996dbbc8b334b5ee8d9d ]
This is needed to link ipv6 as a loadable module, which in turn happens
in allmodconfig.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a57ab96ef9dde231d4d46edba4d5f73720edc16a ]
We already have memcpy_toio(), but not memset_io(), so let's
add the obvious version to allow building an allmodconfig kernel
without errors like
drivers/gpu/drm/ttm/ttm_bo_util.c: In function 'ttm_bo_move_memcpy':
drivers/gpu/drm/ttm/ttm_bo_util.c:390:3: error: implicit declaration of function 'memset_io' [-Werror=implicit-function-declaration]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Richard Kuo <rkuo@codeaurora.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 068bdb67ef74df0ad1627b7247a163e3e252ac11 ]
The automatic update mechanism will trigger an update if the
info block CRCs are different between maxtouch configuration
file (maxtouch.cfg) and chip.
The driver compared the CRCs without retrieving the chip CRC,
resulting always in a failure and firmware flashing action
triggered. Fix this issue by retrieving the chip info block
CRC before the check.
Note that this solution has the benefit that by reading the
information block and the object table into a contiguous region
of memory, we can verify the checksum at probe time. This means
we make sure that we are indeed talking to a chip that supports
object protocol correctly.
Using this patch on a kevin chromebook, the touchscreen and
touchpad drivers are able to match the CRC:
atmel_mxt_ts 3-004b: Family: 164 Variant: 14 Firmware V2.3.AA Objects: 40
atmel_mxt_ts 5-004a: Family: 164 Variant: 17 Firmware V2.0.AA Objects: 31
atmel_mxt_ts 3-004b: Resetting device
atmel_mxt_ts 5-004a: Resetting device
atmel_mxt_ts 3-004b: Config CRC 0x573E89: OK
atmel_mxt_ts 3-004b: Touchscreen size X4095Y2729
input: Atmel maXTouch Touchscreen as /devices/platform/ff130000.i2c/i2c-3/3-004b/input/input5
atmel_mxt_ts 5-004a: Config CRC 0x0AF6BA: OK
atmel_mxt_ts 5-004a: Touchscreen size X1920Y1080
input: Atmel maXTouch Touchpad as /devices/platform/ff140000.i2c/i2c-5/5-004a/input/input6
Signed-off-by: Nick Dyer <nick.dyer@shmanahar.org>
Acked-by: Benson Leung <bleung@chromium.org>
[Ezequiel: minor patch massage]
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 95e59fc3c3fa3187a07a75f40b21637deb4bd12d ]
The Audio has worked, but the mute pin has a weak pulldown which alows
some of the audio signal to pass very quietly. This patch fixes
that so the mute pin is actively driven high for mute or low for normal
operation.
Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic
PD DM3730 SOM-LV")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 189822cbcbf3ea37c26a15612d8f922c440bc0e0 ]
The VAUX3 rail from the PMIC powers a clock driver which clocks
the WL127x. This corrects a bug which did not correctly associate
the vin-supply with the proper power rail.
This also fixes a typo in the pinmuxing to properly configure the
interrupt pin.
Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD
DM3730 SOM-LV")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 33e9572483031a79ad0a4468064675144d9269ec ]
smp_processor_id() checks preemption if CONFIG_DEBUG_PREEMPT is enabled,
causing a warning dump during boot:
[ 5.042377] BUG: using smp_processor_id() in preemptible [00000000] code: swapper/0/1
[ 5.050281] caller is pwrdm_set_next_pwrst+0x48/0x88
[ 5.055330] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.14.24-g57341df0b4 #1
Use the raw_smp_processor_id() for the trace instead, this value does
not need to be perfectly correct. The alternative of disabling preempt
is too heavy weight operation to be applied in PM hot path for just
tracing purposes.
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5c054de228dd6d97bf8e38962bd118953b66e5a0 ]
Since commit 09f3756bb9a8 ("dm9000: Return an ERR_PTR() in all
error conditions of dm9000_parse_dt()"), passing either non-NULL
platform data or device-tree for dm9000 driver to probe is
mandatory.
DM335 board was using none, so networking failed to initialize.
Fix it by passing non-NULL (but empty) platform data.
Fixes: 09f3756bb9a8 ("dm9000: Return an ERR_PTR() in all error conditions of dm9000_parse_dt()")
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d45622c0eaa5992a1a2248cbe93e1ff7a2da7be4 ]
commit c4dc56be7e26 ("ARM: davinci: fix the GPIO lookup for omapl138-hawk")
fixed the GPIO chip name for look-up of MMC/SD CD and WP pins, but forgot
to change the GPIO numbers passed.
The GPIO numbers are not offsets from within a 32 GPIO bank. Fix the
GPIO numbers as well as remove the misleading comment.
Fixes: c4dc56be7e26 ("ARM: davinci: fix the GPIO lookup for omapl138-hawk")
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 67c6b6ff221f807180aea6dd597246f87e1dd98a ]
The GPIO chip is called davinci_gpio.0 in legacy mode. Fix it, so that
mmc can correctly lookup the wp and cp gpios. Also fix the GPIO numbers
as they are not offsets within a bank.
Note that it is the gpio-davinci driver that sets the gpiochip label to
davinci_gpio.0.
Fixes: bdf0e8364fd3 ("ARM: davinci: da850-evm: use gpio descriptor for mmc pins")
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 51e9f12163223546bd3aa9f7af6817931f980da8 ]
The GPIO chip is called davinci_gpio.0 in legacy mode. Fix it, so that
mmc can correctly lookup the wp and cp gpios. Also fix the GPIO numbers
as they are not offsets within a bank.
Note that it is the gpio-davinci driver that sets the gpiochip label to
davinci_gpio.0.
Fixes: b5e1438cf98a ("ARM: davinci: da830-evm: use gpio descriptor for mmc pins")
Reported-by: David Lechner <david@lechnology.com>
Reviewed-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit db82476f37413eaeff5f836a9d8b022d6544accf ]
Currently, the kernel protects access to the agent ID allocator on a per
port basis using a spinlock, so it is impossible for two apps/threads on
the same port to get the same TID, but it is entirely possible for two
threads on different ports to end up with the same TID.
As this can be confusing (regardless of it being legal according to the
IB Spec 1.3, C13-18.1.1, in section 13.4.6.4 - TransactionID usage),
and as the rdma-core user space API for /dev/umad devices implies unique
TIDs even across ports, make the TID an atomic type so that no two
allocations, regardless of port number, will be the same.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 19b9ad67310ed2f685062a00aec602bec33835f0 ]
The comment claims that this helper will try not to loose bits, but for
64bit long it looses the high bits before hashing 64bit long into 32bit
int. Use the helper hash_long() to do the right thing for 64bit long.
For 32bit long, there is no change.
All the callers of end_name_hash() either assign the result to
qstr->hash, which is u32 or return the result as an int value (e.g.
full_name_hash()). Change the helper return type to int to conform to
its users.
[ It took me a while to apply this, because my initial reaction to it
was - incorrectly - that it could make for slower code.
After having looked more at it, I take back all my complaints about
the patch, Amir was right and I was mis-reading things or just being
stupid.
I also don't worry too much about the possible performance impact of
this on 64-bit, since most architectures that actually care about
performance end up not using this very much (the dcache code is the
most performance-critical, but the word-at-a-time case uses its own
hashing anyway).
So this ends up being mostly used for filesystems that do their own
degraded hashing (usually because they want a case-insensitive
comparison function).
A _tiny_ worry remains, in that not everybody uses DCACHE_WORD_ACCESS,
and then this potentially makes things more expensive on 64-bit
architectures with slow or lacking multipliers even for the normal
case.
That said, realistically the only such architecture I can think of is
PA-RISC. Nobody really cares about performance on that, it's more of a
"look ma, I've got warts^W an odd machine" platform.
So the patch is fine, and all my initial worries were just misplaced
from not looking at this properly. - Linus ]
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9fd4350ba8953804f05215999e11a6cfb7b41f2b ]
When skb is sent, it will pass the following functions in soft roce.
rxe_send [rdma_rxe]
ip_local_out
__ip_local_out
ip_output
ip_finish_output
ip_finish_output2
dev_queue_xmit
__dev_queue_xmit
dev_hard_start_xmit
In the above functions, if error occurs in the above functions or
iptables rules drop skb after ip_local_out, kfree_skb will be called.
So it is not necessary to call kfree_skb in soft roce module again.
Or else crash will occur.
The steps to reproduce:
server client
--------- ---------
|1.1.1.1|<----rxe-channel--->|1.1.1.2|
--------- ---------
On server: rping -s -a 1.1.1.1 -v -C 10000 -S 512
On client: rping -c -a 1.1.1.1 -v -C 10000 -S 512
The kernel configs CONFIG_DEBUG_KMEMLEAK and
CONFIG_DEBUG_OBJECTS are enabled on both server and client.
When rping runs, run the following command in server:
iptables -I OUTPUT -p udp --dport 4791 -j DROP
Without this patch, crash will occur.
CC: Srinivas Eeda <srinivas.eeda@oracle.com>
CC: Junxiao Bi <junxiao.bi@oracle.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2da36d44a9d54a2c6e1f8da1f7ccc26b0bc6cfec ]
w/o RXE_START_MASK, the last_psn of IB_OPCODE_RC_SEND_ONLY_INV
will not be updated in update_wqe_psn, and the corresponding
wqe will not be acked in rxe_completer due to its last_psn is
zero. Finally, the other wqe will also not be able to be acked,
because the wqe of IB_OPCODE_RC_SEND_ONLY_INV with last_psn 0
is still there. This causes large amount of io timeout when
nvmeof is over rxe.
Add RXE_START_MASK for IB_OPCODE_RC_SEND_ONLY_INV to fix this.
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f96416cea7bce9afe619c15e87fced70f93f9098 ]
In the cases where iwpm_hash_bucket is NULL and where function
get_mapinfo_hash_bucket returns NULL then the map_info is never added
to hash_bucket_head and hence there is a leak of map_info. Fix this
by nullifying hash_bucket_head and if that is null we know that
that map_info was not added to hash_bucket_head and hence map_info
should be free'd.
Detected by CoverityScan, CID#1222481 ("Resource Leak")
Fixes: 30dc5e63d6a5 ("RDMA/core: Add support for iWARP Port Mapper user space service")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2918c1a900252b4a0c730715ec205437c7daf79d ]
There are few issues with validation of netdevice and listen id lookup
for IB (IPoIB) while processing incoming CM request as below.
1. While performing lookup of bind_list in cma_ps_find(), net namespace
of the netdevice can get deleted in cma_exit_net(), resulting in use
after free access of idr and/or net namespace structures.
This lookup occurs from the workqueue context (and not userspace
context where net namespace is always valid).
CPU0 CPU1
==== ====
bind_list = cma_ps_find();
move netdevice to new namespace
delete net namespace
cma_exit_net()
idr_destroy(idr);
[..]
cma_find_listener(bind_list, ..);
2. While netdevice is validated for IP address in given net namespace,
netdevice's net namespace and/or ifindex can change in
cma_get_net_dev() and cma_match_net_dev().
Above issues are overcome by using rcu lock along with netdevice
UP/DOWN state as described below.
When a net namespace is getting deleted, netdevice is closed and
shutdown before moving it back to init_net namespace.
change_net_namespace() synchronizes with any existing use of netdevice
before changing the netdev properties such as net or ifindex.
Once netdevice IFF_UP flags is cleared, such fields are not guaranteed
to be valid.
Therefore, rcu lock along with netdevice state check ensures that,
while route lookup and cm_id lookup is in progress, netdevice of
interest won't migrate to any other net namespace.
This ensures that associated net namespace of netdevice won't get
deleted while rcu lock is held for netdevice which is in IFF_UP state.
Fixes: fa20105e09e9 ("IB/cma: Add support for network namespaces")
Fixes: 4be74b42a6d0 ("IB/cma: Separate port allocation to network namespaces")
Fixes: f887f2ac87c2 ("IB/cma: Validate routing of incoming requests")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f604db645a66b7ba4f21c426fe73253928dada41 ]
Previously, if a method contained mandatory attributes in a namespace
that wasn't given by the user, these attributes weren't validated.
Fixing this by iterating over all specification namespaces.
Fixes: fac9658cabb9 ("IB/core: Add new ioctl interface")
Signed-off-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
