Add anx7625 bridge driver to support DSI to DP output.
Configure anx7625 chip via I2C for audio/video setup.
CRs-Fixed: 2246610
Change-Id: I25c5a54fc4f6a2f2fc58c8607d81904ac82f46e3
Signed-off-by: Camus Wong <camusw@codeaurora.org>
Signed-off-by: Xiaowen Wu <wxiaowen@codeaurora.org>
In cases such as dynamic fps, resolution switch, currently
unblank event is triggered every time when new modeset is
required. Trigger the event only when active changed.
Change-Id: I6387f576a804999f1e916a1852a4c21719de9e91
Signed-off-by: Jayant Shekhar <jshekhar@codeaurora.org>
Signed-off-by: Narendra Muppalla <NarendraM@codeaurora.org>
* quic/msm-4.14:
msm: driver to create cld80211 nl family at bootup time
spmi: spmi-pmic-arb-debug: Change the probe init order
cfg80211: fix CAC_STARTED event handling
cfg80211/nl80211: add CAC_STARTED event
msm:ipa3: fix the header table gap issue
ARM: dts: msm: Add device tree for SA8150P-adp-star
rpmh_master_stat: Correctly initialize rpmh_unit_base
defconfig: Enable page_owner for sdmsteppe on perf config
msm: ipa: wdi: Add a boolean flag to represent wdi tx over pcie
defconfig: Enable page_owner for sdmshrike on perf config
of: reserved_mem: Fix kmemleak crash on no-map region
defconfig: arm/arm64: add smmu config for secure usecases on qcs405
ARM: dts: msm: enable graphics smmu on qcs405
msm: msm_bus: Change the init level for bus scaling driver
scsi: ufs: Initiate crypto before SCSI for UFS fast boot
sched: remove skip_sg
sched: improve trace prints
ARM: dts: msm: add charger/smb temp_max properties for PM8150B
power: smb5: add support to configure charger temp_max
cfg80211: Scan results to also report the per chain signal strength
msm: vidc: Increase input buffer size
msm: vidc: Amend input buffer count in batch mode
ARM: dts: msm: Add NPU QDSS related clocks for sm8150
msm: npu: Enable npu cti/apb/atb/perf_cnt clocks
power: qpnp-fg-gen4: Update default cutoff voltage to 3.1 V
power: qpnp-fg-gen4: Fix Rslow compensation workaround
ARM: dts: msm: Update alium battery profile for SM8150 platforms
msm: ipa3: fix hdr offset issue
memshare: Conditional free the clients allotted memory
perf: don't zombie certain events in perf_event_release_kernel
defconfig: qcs405: Enable watchdog configs for QCS405
ARM: dts: msm: Add master crypto property in pil nodes for qcs405
soc: qcom: pil: get crypto cell-id through device tree
ARM: dts: msm: Enable ADSP audio PDR for sm8150
iommu/arm-smmu: fix issue by devm_free_irq on cb interrupt line
msm: ADSPRPC: Enable Audio PDR support
cfg80211: fix rcu in cfg80211_unregister_wdev
platform: qpnp-revid: Add REVID support for SM6150
ARM: dts: msm: add DCC clocks for qcs405
defconfig: arm/arm64: enable memory debug configs on qcs405
msm: gsi: Adapt GSI registers to support GSI version 2.5
Revert "mm: memory: reduce fault_around_bytes"
clk: qcom: mdss: add support for DSI 28LPM PLL
Revert "input: touchscreen: shutdown ST touch's power supply when suspend"
ARM: dts: msm: Add USB DLOAD cookie device node on QCS405
mm: prevent to write out dirty page in CMA by may_writepage
mm: vmpressure: allow in-kernel clients to subscribe for events
ARM: dts: msm: Add UFS support for sm6150
defconfig: arm: msm: Enable memshare driver on sm8150
ARM: dts: msm: Add memshare for sm8150
drivers: cpuidle: lpm-levels: Correctly check for list empty
ARM: dts: msm: Update LPM parameters for sm8150
msm: ipa4: fix client register and deregister for usb
msm: ipa4: initialize IPAHAL at ipa_pre_init()
msm: ipa: support ipacm cleanup
soc: qcom: Add support for sa8150p into socinfo driver
ARM: dts: msm: fix machine display name
cpu-hotplug: Fix the cpus_write_lock usage
msm: ipa: gsi: mhi: Configure appropriate polling mode bit for MHI ep
clk: qcom: Update BCR address to spare register
ARM: dts: msm: Disable chd support for QCS405
iommu: arm-smmu: Add error message for hibernation usecase
iommu: arm-smmu: Add PM support for actlr register
iommu: arm-smmu: Restore missing call to arm_smmu_write_context_bank
driver_core: Avoid NULL dereference when CONFIG_OF_KOBJ=n
of: Make CONFIG_OF_KOBJ configurable
msm: kgsl: Don't reset HFI indexes on reset
msm: kgsl: Only look at enabled HFI queues
msm: kgsl: Disable interrupts before stopping HFI
power: smb5: Disable SMB thermal regulation
power: smb5-lib: Fix Type-C CTM status
ARM: dts: msm: Add support for AOP clocks for SDMMAGPIE
ion: msm: Add support for VMID_CP_CDSP
ion: carveout: Add secure carveout heap type
msm vidc : Fix memory leak in venus_hfi_core_init()
defconfig: sdxprairie: Enable SMMU driver for sdxprairie
iommu: arm-smmu: Remove sysfs bind/unbind files
msm: vidc: Fix corruption in bus vote
msm: kgsl: Fix gmu & hfi irq remove failures
defconfig: msm: Create symlinks for sdmsteppe defconfigs
usb: dwc3: gadget: delay clearing run/stop when setup just arrived
msm: kgsl: Update CP ROQ size for a640 and a680
ARM: dts: msm: Include SMMU DT changes for sdxprairie
msm: kgsl: Add A640v2 to the GPU list
Change-Id: Ia8f1005692ecb11380e8ff58973808127791c81c
Signed-off-by: Namratha Siddappa <namratha@codeaurora.org>
Create cnss_genl driver to create a netlink family cld80211
and make it available to cld driver and applications when
they query for it.
This driver creates multicast groups to facilitate communication
from cld driver to userspace and allows cld driver to register
for different commands from user space
Change-Id: I0795dd08b6429fad60187fee724b3fd3ccfa5603
Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org>
CRs-Fixed: 1100401
Currently, both the regular and debug spmi pmic arbiter devices
are probed in the same initcall order (arch_init). This is fine.
However, most of the sepolicy rules set in the userspace are
for the PMIC devices under spmi-0 bus. If the debug spmi pmic
arbiter device probes first and takes "spmi-0" name, then the
sepolicy rules set will be broken. Fix it by changing the
probe init order of debug spmi pmic arbiter device to module
init.
Change-Id: I145e78a205bc80f274d8d926353a88255a7f4167
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Exclude CAC_STARTED event from !wdev->cac_started check,
since cac_started will be set later in the same function.
Signed-off-by: Dmitry Lebed <dlebed@quantenna.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Change-Id: I7eb8f3e42221ae22e34b4edb06edcec7683eba33
Git-commit: 850964519a65a96aa8231ff31e28f30c2633484d
Git-repo: git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
CRs-fixed: 2265562
Signed-off-by: Peng Xu <pxu@codeaurora.org>
